AED36US48
AC/DC Power Supply, ITE, 1 Output, 36 W, 48 VDC, 750 mA
- Manufacturer: XP POWER
- Product type: AC / DC External Plug In Adaptor Power Supplies
- Plug Type: Mains Plug Sold Separately
- Product Range: AED
- No. of Outputs: 1 Output
- Output Connector: Barrel Plug Center Positive 2.5mm x 5.5mm x 12mm
- Output Power Max: 36W
- Input Voltage VAC: 90V AC to 264V AC
- Input Voltage AC Max: 264V
- Input Voltage AC Min: 90V
- Power Supply Approvals: ITE
- Power Supply Output Type: Fixed
- Output Current - Output 1: 750mA
- Output Voltage - Output 1: 48VDC
| Delivery and price | |
|---|---|
| Units per pack | 25 |
| Price | 31.89 € |
| Current stock | 10+ |
| Lead time | 30 days |
**Watts**
xppower.com
## **AED Series** ~~e~~
- Low Profile
- Single Outputs from 5 V to 48 V
- Universal Input
- Optional Floating Output
- High Power Density
- Class II Insulation on 36 W Version
- 3 Year Warranty
## **Speci** ~~**fication**~~
## **Input**
|**Inputputut**|||
|---|---|---|
|Input Voltage|• 90-264 VAC||
|Input Frequency|• 47-63 Hz||
|Input Current|• AED36:<br>1.00 A max||
||AED45:<br>1.20 A max||
||AED70:<br>2.00 A max||
|Inrush Current|• AED36:<br>50 A max at 230 VAC||
||AED45:<br>100 A max at 230 VAC||
||AED70:<br>100 A max at 240 VAC||
|Earth Leakage Current|• AED36:<br>Class II||
||AED45/70: 3.5 mA max||
|Power Factor|• Compliant with EN61000-3-2||
|**Output**|||
|Output Voltage<br>Initial Set Accuracy|• See tables<br>• ±2%||
|Minimum Load|• No minimum load requirement||
|Hold Up Time|• AED36:<br>8 ms min at 115 VAC<br>AED45:<br>8 ms min at 115 VAC||
||AED70:<br>20 ms min at 115 VAC||
|Line Regulation|• ±1%||
|Load Regulation|• See tables||
|Ripple & Noise|• 1% pk-pk max, 20 MHz BW (see note|2)|
|Overvoltage Protection|• Typical 125% max||
|Overload Protection|• 120-150% hiccup/trip & restart mode||
||with auto recovery||
|Short Circuit Protection|• Continuous||
|Temperature|• ±0.05%/˚C||
|Coefficient|||
## **Output**
## **General**
|Efficiency|• 85% typical at 230 VAC & 100% load|
|---|---|
|Isolation|• 3000 VAC Input to Output,|
||1500 VAC Input to Ground.|
||Negative output is connected to ground.|
||For optional 500 VAC output to ground|
||isolation add suffix ‘-F’ to model number|
|Switching Frequency|• 60 kHz ±10 kHz|
|Power Density|• AED36: 5.34 W/in3|
||AED45: 3.20 W/in3|
||AED70: 4.98 W/in3|
|MTBF|• 200 kHrs to MIL-HDBK-217F at 25 °C, GB|
|**Environmental**||
|Operating Temperature|• 0 ˚C to +60 ˚C derate linearly from 100%|
||load at +40 ˚C to 50% load at +60 ˚C|
|Operating Humidity|• 93% RH, non-condensing|
|Operating Altitude|• 2000 m|
|Storage Temperature|• -20 ˚C to +85 ˚C|
## **Environmental**
## **EMC & Safety**
|Emissions|• EN55022 Class B conducted & radiated|
|---|---|
|Harmonic Currents|• EN61000-3-2, Class A|
|Voltage Flicker|• EN61000-3-3|
|ESD Immunity|• EN61000-4-2, 8 kV air, 4 kV contact|
||Perf Criteria A|
|Radiated Immunity|• EN61000-4-3, 3 V/m Perf Criteria A|
|EFT/Burst|• EN61000-4-4, level 2 Perf Criteria A|
|Safety Approvals|• EN60950-1, UL60950-1|
**AED36**
## ~~**Models and Ratings**~~
|Output Power<br>Maximum|Output Voltage<br>Nominal<br>Output|Output Current<br>Maximum|Load<br>Regulation(1)|Model<br>Number|
|---|---|---|---|---|
|20 W|5.0 V|4.00 A|±6%|AED36US05|
|27 W|9.0 V|3.00 A|±5%|AED36US09|
|30 W|12.0 V|2.50 A|±5%|AED36US12|
|32 W|13.5 V|2.40 A|±5%|AED36US13|
|36 W|15.0 V|2.40 A|±3%|AED36US15|
|36 W|18.0 V|2.00 A|±2%|AED36US18|
|36 W|24.0 V|1.50 A|±2%|AED36US24|
|36 W|48.0 V|0.75 A|±2%|AED36US48|
## ~~**Notes**~~
_1. Load regulation is measured from 60% to full load and from 60% to 20% load (60% ±40% full load)._
_2. Measured at the output connector with a 0.1 µF ceramic capacitor and a 10 µF electrolytic capacitor._
## ~~**Mechanical Details**~~
**==> picture [435 x 206] intentionally omitted <==**
**----- Start of picture text -----**<br>
0.47<br>(12.00)<br>Weight: 0.42 lbs (190 g) approx.<br>Power Cord Order Part:<br>UK - UK-MAINS-8<br>European - EU-MAINS-8<br>US - US-MAINS-8<br>wa e<br>4.33<br>IEC320-C8 (110)<br>0.79<br>(20)<br>1.97 (50) = ——<br>**----- End of picture text -----**<br>
## ~~**Notes**~~
All dimensions shown in inches (mm)
Output connector is 5.5mm dia. outer barrel, inner dia. is 2.5mm with a center + and outer shell - polarity. Optional output connectors available. Output cable is 48” (1220mm) approx.
**AED45**
## ~~**Models and Ratings**~~
|Output Power<br>Maximum|Output Voltage<br>Nominal|Output Current<br>Maximum|Load<br>Regulation(1)|Model<br>Number|
|---|---|---|---|---|
|30 W|5.0 V|6.00 A|±6%|AED45US05|
|45 W|12.0 V|3.75 A|±5%|AED45US12|
|45 W|15.0 V|3.00 A|±3%|AED45US15|
|45 W|18.5 V|2.50 A|±2%|AED45US18|
|45 W|19.0 V|2.37 A|±2%|AED45US19|
|45 W|24.0 V|1.88 A|±2%|AED45US24|
|48 W|48.0 V|1.00 A|±2%|AED45US48|
## ~~**Notes**~~
_1. Load regulation is measured from 60% to full load and from 60% to 20% load (60% ±40% full load)._
_2. Measured at the output connector with a 0.1 µF ceramic capacitor and a 10 µF electrolytic capacitor._
## ~~**Mechanical Details**~~
**==> picture [509 x 188] intentionally omitted <==**
**----- Start of picture text -----**<br>
Weight: 0.73 lbs (330 g) approx.<br>Power Cord Order Part:<br>UK - UK-MAINS-IEC<br>European - EU-MAINS-IEC<br>US - US-MAINS-IEC 2.29<br>(58)<br>y o =a<br>5.20<br>{h f<br>(132)<br>IEC320-C14<br>1.18<br>(30)<br>qe f iF»<br>0.47<br>(12.00)<br>**----- End of picture text -----**<br>
## ~~**Notes**~~
All dimensions shown in inches (mm) Output connector is 5.5mm dia. outer barrel, inner dia. is 2.5mm with a center + and outer shell - polarity. Optional output connectors available. Output cable is 48” (1220mm) approx.
3
**AED70**
## ~~**Models and Ratings**~~
|Output Power<br>Maximum|Output Voltage<br>Nominal|Output Current<br>Maximum|Load<br>Regulation(1)|Model<br>Number|
|---|---|---|---|---|
|70 W|12.0 V|5.50 A|±5%|AED70US12|
|70 W|15.0 V|4.60 A|±3%|AED70US15|
|70 W|18.0 V|3.90 A|±2%|AED70US18|
|70 W|19.0 V|3.70 A|±2%|AED70US19|
|70 W|24.0 V|3.00 A|±2%|AED70US24|
|70 W|48.0 V|1.50 A|±2%|AED70US48|
## ~~**Notes**~~
_1. Load regulation is measured from 60% to full load and from 60% to 20% load (60% ±40% full load)._
_2. Measured at the output connector with a 0.1 µF ceramic capacitor and a 10 µF electrolytic capacitor._
## ~~**Mechanical Details**~~
**==> picture [508 x 188] intentionally omitted <==**
**----- Start of picture text -----**<br>
Weight: 0.76 lbs (345 g) approx.<br>Power Cord Order Part:<br>UK - UK-MAINS-IEC<br>European - EU-MAINS-IEC<br>US - US-MAINS-IEC 2.28<br>(58.0)<br>0.47<br>o F aus<br>(12.0)<br>a 5.20 (132.0) t<br>IEC320-C14<br>1.18<br>(30.0)<br>Sic<br>**----- End of picture text -----**<br>
## ~~**Notes**~~
All dimensions shown in inches (mm). Output connector is 5.5mm dia. outer barrel, inner dia. is 2.5mm with a center + and outer shell - polarity.
2. Optional output connectors available. 3. Output cable is 48” (1220mm) approx.
07-Feb-12
Updated at February 9, 2023
XP Power is a globally recognized leader in the design and manufacture of critical power solutions for the electronics industry. With a steadfast commitment to total quality and in-house engineering expertise, the company delivers highly reliable components that support complex applications across the industrial, healthcare, and technology sectors. Their extensive manufacturing capabilities provide engineers with a broad and dependable source for innovative power products. Our extensive portfolio of XP Power components is heavily focused on robust power and line protection. The core of this offering features a vast selection of high-performance AC/DC converters, designed to meet the rigorous efficiency and footprint demands of modern electronic systems. Complementing these are numerous reliable DC/DC converters, providing versatile options for precise voltage regulation and seamless system integration. Beyond their primary power conversion ranges, XP Power manufactures specialized components to address specific design challenges. Our selection includes essential passive components, such as power line filters for effective EMC and RFI suppression, ensuring signal integrity and strict regulatory compliance. Additionally, we provide dedicated AC/DC LED power supplies tailored for reliable, long-lasting performance in advanced commercial and industrial lighting applications.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →