ACM1513-551-2PL-TLHF

**Common mode filters/Chokes** 

**For power line ACM series** 

## **ACM1513 type** 

## **■FEATURES** 

- ◯Chip common mode filter for large current applications. 

◯For each series, there is excellent common mode impedance and noise suppression in a compact case. 

◯Compatible with high-density portable devices, which are always being made smaller and lighter, because the height has been reduced. 

◯Operating temperature range: –40 to +85°C 

## **■APPLICATION** 

◯Power line noise countermeasure for various electronic equipment. 

## **■PART NUMBER CONSTRUCTION** 

**==> picture [398 x 45] intentionally omitted <==**

**----- Start of picture text -----**<br>
ACM 1513 - 551 - 2PL - TL HF<br>L×W×H dimensions Impedance Number of Packaging Internal<br>Series name<br>15.0×13.0×6.0 mm (Ω) at 100MHz lines style code<br>**----- End of picture text -----**<br>


## **■CHARACTERISTICS SPECIFICATION TABLE** 

|**Common mode impedance**|**Common mode impedance**|**DC resistance**|**Rated current**<br>**Insulation**|**Rated voltage**|**Part No.**|
|---|---|---|---|---|---|
||||**resistance**|||
|**[100MHz]**||**[1 line]**||||
|**(Ω)min.**|**(Ω)typ.**|**(mΩ)max.**|**(A)max.**<br>**(MΩ)min.**|**(V)max.**||
|450|550|4|10<br>10|50|ACM1513-551-2PL-TLHF|



## **Measurement equipment** 

|**Measurement item**|**Product No.**|**Manufacturer**|
|---|---|---|
|Common mode impedance|4991A|Keysight Technologies|
|DC resistance|4338A|Keysight Technologies|
|Insulation resistance|4339A|Keysight Technologies|



* Equivalent measurement equipment may be used. 

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

(1/4) 

20230908 

cmf_commercial_power_acm1513_en 

## **ACM1513 type** 

## **■IMPEDANCE VS. FREQUENCY CHARACTERISTICS** 

**==> picture [498 x 279] intentionally omitted <==**

**----- Start of picture text -----**<br>
10000<br>551 Differential mode<br>1000<br>551 Common mode<br>100<br>10<br>1 10 100 1000<br>Frequency (MHz)<br>Measurement equipment<br>Product No. Manufacturer<br>4991A Keysight Technologies<br>* Equivalent measurement equipment may be used.<br>) Ω<br>Impedance (<br>**----- End of picture text -----**<br>


Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

(2/4) 

20230908 

cmf_commercial_power_acm1513_en 

## **ACM1513 type** 

## **■SHAPE & DIMENSIONS** 

**==> picture [183 x 178] intentionally omitted <==**

**----- Start of picture text -----**<br>
15.0±0.4<br>1 4<br>2 3<br>i a<br>fie 10.4typ.<br>2.3±0.2 2.3±0.2 3.8±0.2<br>2.7±0.2 2.7±0.2<br>a<br>Dimensions in mm<br>13.0±0.4<br>6.0max.<br>**----- End of picture text -----**<br>


## **■PACKAGING STYLE** 

## □ **REEL DIMENSIONS** 

**==> picture [162 x 167] intentionally omitted <==**

**----- Start of picture text -----**<br>
2.0±0.5<br>RT ø13.0±0.2 25.5±1.0<br>(ø21) 29.5±1.0<br>a r=<br>ø330±2<br>ø100±1<br>**----- End of picture text -----**<br>


Dimensions in mm 

## **■RECOMMENDED LAND PATTERN** 

**==> picture [514 x 471] intentionally omitted <==**

**----- Start of picture text -----**<br>
□ TAPE DIMENSIONS<br>Sprocket<br>0.4±0.05 ø1.55±0.05 4±0.1 2±0.1 hole<br>L_| | _<br>10.4<br>17.0<br>Dimensions in mm<br>K A 16±0.1<br>— ee ee<br>ns ■CIRCUIT DIAGRAMCIRCUIT DIAGRAMCIRCUIT DIAGRAM esiasleri Dimensions in mm<br>4<br>Type A B K<br>3 ACM1513 (13.4) (15.5) (7.3)<br>P ec SSE<br>• No polarity<br>500 to 560min.<br>160min. Taping 440min.<br>■RECOMMENDED REFLOW PROFILERECOMMENDED REFLOW PROFILE<br>Drawing direction<br>Preheating Soldering Natural<br>cooling Dimensions in mm<br>Peak<br>245°C □ PACKAGE QUANTITY<br>Package quantity 500 pcs/reel<br>230°C 230°C<br>■TEMPERATURE RANGE, INDIVIDUAL WEIGHT<br>180°C Operating Storage Individual<br>temperature range temperature range * weight<br>5s<br>150°C –40 to +85 °C –40 to +85 °C 3.14 g<br>* The storage temperature range is for after the assembly.<br>60 to 120s 10 to 30s<br>0 OO<br>Time<br>Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (3/4)<br>Please note that the contents may change without any prior notice due to reasons such as upgrading.<br>3.8 9.2 1.75±0.1 11.5±0.1<br>B<br>24±0.3<br>Temperature<br>**----- End of picture text -----**<br>


**==> picture [106 x 113] intentionally omitted <==**

**----- Start of picture text -----**<br>
L_| |<br>10.4<br>17.0<br>ns ■CIRCUIT DIAGRAMCIRCUIT DIAGRAMCIRCUIT DIAGRAM<br>3.8 9.2<br>**----- End of picture text -----**<br>


## **■CIRCUIT DIAGRAMCIRCUIT DIAGRAMCIRCUIT DIAGRAM** 

1 4 2 3 P ~~ec~~ • No polarity **■RECOMMENDED REFLOW PROFILERECOMMENDED REFLOW PROFILE** 

(3/4) 

20230908 

cmf_commercial_power_acm1513_en 

## **REMINDERS FOR USING THESE PRODUCTS** 

Before using these products, be sure to request the delivery specifications. 

## **SAFETY REMINDERS** 

Please pay sufficient attention to the warnings for safe designing when using this products 

## **REMINDERS** 

- ◯The storage period is within 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). 

If the storage period elapses, the soldering of the terminal electrodes may deteriorate. 

- ◯Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). 

- ◯Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. 

- ◯When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. 

- ◯Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. 

- ◯Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. 

- ◯Use a wrist band to discharge static electricity in your body through the grounding wire. 

- ◯Do not expose the products to magnets or magnetic fields. 

- ◯Do not use for a purpose outside of the contents regulated in the delivery specifications. 

- ◯The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. 

- The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/ or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. 

If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. 

- (1) Aerospace/aviation equipment (7) Transportation control equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (8) Public information-processing equipment 

- (3) Medical equipment 

   - (9) Military equipment 

- (4) Power-generation control equipment (10) Electric heating apparatus, burning equipment (5) Atomic energy-related equipment (11) Disaster prevention/crime prevention equipment (6) Seabed equipment (12) Safety equipment 

   - (13) Other applications that are not considered general-purpose applications 

When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. 

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

(4/4) 

20230908 

cmf_commercial_power_acm1513_en