ACM12V-701-2PL-TL00

November 2015 

## Common Mode Filters 

For automotive power line 

## **ACM-V Series** 

## ACM12V Type 

**ACM12V** 

(2/7) 

## **REMINDERS FOR USING THESE PRODUCTS** 

Before using these products, be sure to request the delivery specifications. 

## **SAFETY REMINDERS** 

Please pay sufficient attention to the warnings for safe designing when using these products. 

## **REMINDERS** 

The storage period is less than 12 months.  Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or less). 

If the storage period elapses, the soldering of the terminal electrodes may deteriorate. 

Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). 

Before soldering, be sure to preheat components. 

The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. 

- Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. 

- When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. 

- Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. 

Carefully lay out the coil for the circuit board design of the non-magnetic shield type. 

A malfunction may occur due to magnetic interference. 

Use a wrist band to discharge static electricity in your body through the grounding wire. 

Do not expose the products to magnets or magnetic fields. 

Do not use for a purpose outside of the contents regulated in the delivery specifications. 

The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications 

equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. 

The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. 

If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. 

(1) Aerospace/Aviation equipment (8) Public information-processing equipment (2) Transportation equipment (electric trains, ships, etc.) (9) Military equipment (3) Medical equipment (10) Electric heating apparatus, burning equipment (4) Power-generation control equipment (11) Disaster prevention/crime prevention equipment (5) Atomic energy-related equipment (12) Safety equipment (6) Seabed equipment (13) Other applications that are not considered general-purpose (7) Transportation control equipment applications 

When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. 

20151120 / cmf_automotive_power_acm12v_en.fm 

(3/7) 

## **Common Mode Filters For automotive power line** 

**Product compatible with RoHS directive Compatible with lead-free solders AEC-Q200** 

## **Overview of ACM12V Type** 

## ~~|~~ **FEATURES** 

Exclusive square type closed magnetic core designed as an exclusive core is used, so it can be small while maintaining the same features. 

Low profile design makes it optimal for surface mounting. 

Excellent impedance characteristics, making it great for suppressing common mode noise. 

Series includes large current products up to 8A, making them compatible with various DC power lines. Covers a wide operating temperature range from –40 to +125°C. 

## ~~|~~ **APPLICATION** 

Common mode noise countermeasure for electronic controller DC power lines and power supply lines for car multi-media equipment and various electronic devices. 

**==> picture [469 x 81] intentionally omitted <==**

**----- Start of picture text -----**<br>
| PART NUMBER CONSTRUCTION<br>- - -<br>ACM 12V 701 2PL TL 00<br>+ ___—_S L—___t -__—_t___<br>L×W×H Dimensions Impedance<br>Series name Number of lines Packaging style Internal code<br>(mm) ( ) at 100MHz<br>a 12V 12.0×11.0×6.0 701 700 2PL a 2 lines TL ø330mm reel 00<br>**----- End of picture text -----**<br>


## **OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT** 

|**Type**|**Temperature range**<br>**Operating**<br>**temperature**<br>（**°C**）<br>**Storage**<br>**temperature**<br>（**°C**）|**Temperature range**<br>**Operating**<br>**temperature**<br>（**°C**）<br>**Storage**<br>**temperature**<br>（**°C**）|**Reel diameter**<br>（**mm**）|**Package quantity**<br>**(pieces/reel)**|**Individual weight**<br>（**g**）|
|---|---|---|---|---|---|
|**ACM12V**|–40 to +125|–40 to +125|ø330|500|2.3|



The Storage temperature range is for after the circuit board is mounted. 

RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/ 

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20151120 / cmf_automotive_power_acm12v_en.fm 

(4/7) 

## **ACM12V Type** 

## | **RECOMMENDED REFLOW PROFILE** 

**==> picture [263 x 199] intentionally omitted <==**

**----- Start of picture text -----**<br>
Preheating Soldering Natural<br>cooling<br>Peak<br>T4<br>T3 T3<br>T2<br>t3<br>T1<br>t1 t2<br>t: Time<br> Temperature<br>T:<br>**----- End of picture text -----**<br>


|**Preheating**|||**Soldering**||**Peak**||
|---|---|---|---|---|---|---|
|**Temp.**||**Time**|**Temp.**|**Time**|**Temp.**|**Time**|
|**T1**|**T2**|**t1**|**T3**|**t2**|**T4**|**t3**|
|150°C|180°C|60 to 120s|230°C|10 to 30s|245°C|5s|



Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20151120 / cmf_automotive_power_acm12v_en.fm 

(5/7) 

## **ACM12V Type** 

## **SHAPE & DIMENSIONS** 

**==> picture [306 x 206] intentionally omitted <==**

**----- Start of picture text -----**<br>
12.0±0.3<br>==<br>1 4<br>P|<br>2 3<br>L!<br>“ Lk Le<br>2.3±0.2 7.4typ. 2.3±0.2<br>2.7±0.2 —-l 2.5±0.2 Lt lL 2.7±0.2 Dimensions in mm<br>11.0±0.3<br>6.0max.<br>**----- End of picture text -----**<br>


## **RECOMMENDED LAND PATTERN** 

## **CIRCUIT DIAGRAM** 

**==> picture [345 x 119] intentionally omitted <==**

**----- Start of picture text -----**<br>
14.0<br>7.6typ. 1 4<br>2 3<br>• No polarity<br>ole Dimensions in mm<br>2.7<br>5.2<br>**----- End of picture text -----**<br>


~~Ge~~ Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20151120 / cmf_automotive_power_acm12v_en.fm 

(6/7) 

## **ACM12V Type** 

## **ELECTRICAL CHARACTERISTICS** 

## a **ELECTRICAL CHARACTERISTICS** ~~SF~~ **CHARACTERISTICS SPECIFICATION TABLE** 

|**Common mode impedance**|**DC resistance**|**Rated current**<br>**Rated voltage**|**Insulation**|**Part No.**|
|---|---|---|---|---|
||||**resistance**||
|**[at 100MHz]**|||||
|**(**<br>**)min.**<br>**(**<br>**)typ.**<br>**(m**<br>**)max.**<br>**(A)max.**<br>**(V)max.**<br>**(M**<br>**)min.**<br>~~Q~~<br>~~Q~~<br>~~Q~~<br>~~Q~~|||||
|500<br>700|6|8.0<br>80|10|ACM12V-701-2PL-TL00|
|○Measurement equipment|||||
|Measurement item|Product No.|Manufacturer|||
|Common mode impedance|4991A|Agilent Technologies|||
|DC resistance|4338A|Agilent Technologies|||
|Insulation resistance|4339A|Agilent Technologies|||



- ＊ Equivalent measurement equipment may be used. 

## ~~|~~ **IMPEDANCE VS. FREQUENCY CHARACTERISTICS** 

**==> picture [497 x 274] intentionally omitted <==**

**----- Start of picture text -----**<br>
10000<br>1000<br>701 Common mode<br>701 Differential mode<br>100<br>10<br>1<br>1 10 100 1000<br>Frequency (MHz)<br>○ Measurement equipment<br>Product No. Manufacturer<br>4991A Agilent Technologies<br>＊ Equivalent measurement equipment may be used.<br>)Ω<br>Impedance (<br>**----- End of picture text -----**<br>


~~A~~ Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20151120 / cmf_automotive_power_acm12v_en.fm 

(7/7) 

## **ACM12V Type** 

## **PACKAGING STYLE** 

## **REEL DIMENSIONS** 

**==> picture [147 x 177] intentionally omitted <==**

**----- Start of picture text -----**<br>
2.0±0.5 E<br>:<br>1.0<br>ø13.0±0.2 W1<br>|| ø21.0±0.8 W2<br>ig<br>A<br>N<br>**----- End of picture text -----**<br>


|Type|A|W1|W2|N|E|
|---|---|---|---|---|---|
|**ACM12V**|ø330±2|24.4+2/–0|28.4 typ.|100±1|2 typ.|



**==> picture [59 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dimensions in mm<br>**----- End of picture text -----**<br>


## **TAPE DIMENSIONS** 

øD0 P2 P0 t A P1 K ~~eeateenricceram 7~~ 3 Dimensions in mm Type A B øD0 E F P0 P1 P2 W K t **ACM12V** 13.2±0.1 13.5±0.1 1.5+0.1/0 1.75±0.1 11.5±0.1 4.0±0.1 16.0±0.1 2.0±0.1 24.0±0.3 6.4±0.1 0.5±0.05 ~~——=—=—T—————E—E—E—E Eo~~ 

**==> picture [255 x 69] intentionally omitted <==**

**----- Start of picture text -----**<br>
500 to 560min.<br>160min. Taping L<br>O O M oO G PT]<br>Drawing direction<br>**----- End of picture text -----**<br>


Type L ~~——~~ **ACM12V** 440min. Dimensions in mm 

~~a~~ Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20151120 / cmf_automotive_power_acm12v_en.fm