A663HJ472M100A

Pin/Solder Tag **ALP22 and ALT22/23 Series, +85°C** 

## **NOT FOR NEW DESIGN** 

## **Overview** 

## **Applications** 

The KEMET ALP22 and ALT22/23 capacitors feature low ESR and high frequency impedance. The ALP/T22/23 capacitors have a very high CV per unit volume. 

The ALP solder pin and ALT solder tag range details are incorporated herein, primarily, for maintenance and/or replacement purposes. 

## **Benefits** 

- Solder tag (ALT) and DIN standard solder pin (ALP) 

- Long life, up to 26,000 hours at +85°C (VR, IR applied) 

- ALC snap-in should be considered for new designs 

## **Part Number System** 

|**ALP**|**22A**|**682**|**AB**|**010**|**010**|
|---|---|---|---|---|---|
|Series|Version|Capacitance Code (µF)|Size Code|Rated Voltage (VDC)||
|ALP = Solder pin<br>ALT = Solder tag|22A = Standard<br>23A = Threaded<br>Mounting Stud<br>(ALT only)|First two digits<br>represent significant<br>figures. Third digit<br>specifies number of<br>zeros.|See Dimension Table|040 = 40<br>063 = 63<br>100 = 100<br>200 = 200|250 = 250<br>385 = 385<br>400 = 400<br>450 = 450|



**Built Into Tomorrow** 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

A4046_ALP_T22_23 • 8/8/2023 

1 

## **NOT FOR NEW DESIGN** 

Pin/Solder Tag – ALP22 and ALT22/23 Series, +85°C 

## **Performance Characteristics** 

**==> picture [542 x 21] intentionally omitted <==**

**----- Start of picture text -----**<br>
Item Performance Characteristics<br>**----- End of picture text -----**<br>


|**Item**|**Performance Characteristics**|**Performance Characteristics**|
|---|---|---|
||||
|Capacitance Range|22 – 150,000 µF||
|Rated Voltage|40 – 450 VDC||
|Operating Temperature|−40 to +85°C||
|Storage Temperature Range|−55 to +85°C||
|Capacitance Tolerance|±20% at 100 Hz/+20°C||
|Operational Lifetime|D (mm)|Rated Voltage and Ripple Current at +85°C (hours)|
||25|12,000|
||30|15,000|
||35|18,000|
||40|26,000|
|End of Life Requirement|∆ C/C < ±10%||
|Shelf Life|2,000 hours at +85°C or 30,000 hours at +40°C 0 VDC||
|Leakage Current|I = 0.006 CV or 6,000 µA (whichever is smaller)||
||C = rated capacitance (µF), V = rated voltage (VDC). Voltage applied for 5 minutes at +20°C.||
|Standards|IEC 60384–4||



## **Surge Voltage** 

|**Condition**|**Voltage (VDC)**|**Voltage (VDC)**|**Voltage (VDC)**|**Voltage (VDC)**|**Voltage (VDC)**|
|---|---|---|---|---|---|
||40|63|100|200|385|
|≤ 30 second surge, 1,000 cycles at +85°C|46|72.5|115|230|423.5|



© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

A4046_ALP_T22_23 • 8/8/2023 

2 

## **NOT FOR NEW DESIGN** 

Pin/Solder Tag – ALP22 and ALT22/23 Series, +85°C 

## **Test Method & Performance** 

|**Endurance Life Test**|**Endurance Life Test**|**Endurance Life Test**|
|---|---|---|
|Conditions|Performance||
|Temperature<br>+85°C|+85°C||
|Test Duration<br>5,000 hours|5,000 hours||
|Ripple Current<br>Available upon request|Available upon request||
|Voltage<br>The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor|The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor||
|**Performance**<br>**The followin**|**The following specifications will be satisfied when the capacitor is tested at +20°C:**||
|Capacitance Change|≤ 100 V|Within 15% of the initial value|
||> 100 V|Within 10% of the initial value|
|Equivalent Series Resistance<br>Does not exceed 200% of the initial value|Does not exceed 200% of the initial value||
|Leakage Current<br>Does not exceed leakage current limit|Does not exceed leakage current limit||



## **Dimensions – Millimeters (ALP)** 

**==> picture [381 x 375] intentionally omitted <==**

**----- Start of picture text -----**<br>
<—__ L __ 3} [" LL ALT<br>D S<br>an C C<br>Optional Mounting Stud<br>(MS) Insulated Sleeve<br>ALP ALP<br>< _ L —+| » < LL (D = 25) S 2.5lo e 12. hier 5 +0.1 <— 2 L ——>}| <= LL (D = 35) 7.5401 1Wie 7.5 + s0. t1 p 2.5i e<br>D p= 1 oy itesirtl D O'_ OF stein<br>3 Maximum 3 Maximum<br>NN Insulated Sleeve ALP O1.3TYP.x 3 ™“ Insulated Sleeve ALP O1.3TYP.x 4<br>< L ——+| , <— LL (D = 30) 7.520.141" 1 «|7.5 40. 1 $2 —_ L _—>> | < LL (D = 40) 20 0 40. +0.1<br>D = 3 0) frieHEE etaitHHH} a | | f e) rosa et1 7.5 e<br>D<br>_ Qu pibicseenae ee Q Tassie<br>p= - ~O 2 eg artes = 3] SHH Here<br>Insulated Sleeve I L 3 Maximum eiteneeetttiie 3 Maximum 3 Re SE aye<br>NN Insulated Sleeve \o1STYP.x5<br>Dimensions in mm<br>Approximate<br>Size Code D L LL Weight<br>Grams<br>±1 ±2 ±0.5<br>AB 25 45 7.5 30<br>BB 30 45 7.5 50<br>CB 35 45 7.5 65<br>CD 35 55 7.5 75<br>DB 40 45 7.5 80<br>DD 40 55 7.5 95<br>DE 40 75 7.5 125<br>DF 40 105 7.5 170<br>Note: Dimensions include sleeving<br>**----- End of picture text -----**<br>


© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

A4046_ALP_T22_23 • 8/8/2023 

3 

Pin/Solder Tag – ALP22 and ALT22/23 Series, +85°C 

## **NOT FOR NEW DESIGN** 

## **Dimensions – Millimeters (ALT)** 

**==> picture [390 x 390] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|L|LL|ALT|
|D|ey|S|f|a|
|Optional Mounting Stud|
|(MS)|Insulated Sleeve|
|ALP|ALP|
|~.|L|=||<|LL|(D = 25)|<_<|L|—|>|||<|LL|(D = 35)|1|7.5 20.|1|
|D|b|e|5|Hea|D||=|10|eiteerconsesessst|
|r|SHE|ay|=|w|e|eae|
|3 Maximum|3 Maximum|
|a|Insulated Sleeve|ALP|O1.3TYP.x3|NN|Insulated Sleeve|>|ALP|D1. 3TYP.x 4|
|——|L|——>||<|LL|(D = 30)|1|7530|1|—|L|__3|}|-|LL|(D = 40)|200.1|
|D|||2)|Rit|ttaces|||=|O06|PEEEEEEEEESEEEH|
|D|
|-i”|OrRo|y|oFSee fe] EAH||oo—|©oo|2)|al|aagieeatee|
|3 Maximum|
|—|Insulated Sleeve|in|EEC|ereO13TYP.x 4|>||I|.|3 Maximum|2|Bees|aeiideteetanstecectetee|
|NN|Insulated Sleeve|'O1.3TYP.x|5.|
|Dimensions in mm|
|Mounting|Mounting|Approximate|
|Size Code|D|L|S|LL|Stud (M x H)|Clip|Weight|
|Grams|
|±1|±2|±0.5|±1|Nominal|
|AA|25|35|10|10|M8 x 12|V2/H1|30|
|AB|25|45|10|10|M8 x 12|V2/H1|39|
|BB|30|45|10|10|M8 x 12|50|
|CB|35|45|10|10|M8 x 12|V3/H2|65|
|CD|35|55|10|10|M8 x 12|V3/H2|75|
|DB|40|45|10|10|M8 x 12|V9|80|
|DD|40|55|10|10|M8 x 12|V9|95|
|DE|40|75|10|10|M8 x 12|V9|125|
|DF|40|105|10|10|M8 x 12|V9|170|
|Note: Dimensions include sleeving|

**----- End of picture text -----**<br>


© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

A4046_ALP_T22_23 • 8/8/2023 

4 

Pin/Solder Tag – ALP22 and ALT22/23 Series, +85°C 

## **NOT FOR NEW DESIGN** 

## **Shelf Life** 

The capacitance, ESR and impedance of a capacitor will not change significantly after extended storage periods, however the leakage current will very slowly increase. KEMET products are particularly stable and allow a shelf life in excess of three years at 40°C. See sectional specification under each product series for specific data. 

## **Re-age (Reforming) Procedure** 

Apply the rated voltage to the capacitor at room temperature for a period of one hour, or until the leakage current has fallen to a steady value below the specified limit. During re-aging a maximum charging current of twice the specified leakage current or 5 mA (whichever is greater) is suggested. 

## **Reliability** 

The reliability of a component can be defined as the probability that it will perform satisfactorily under a given set of conditions for a given length of time. 

In practice, it is impossible to predict with absolute certainty how any individual component will perform; thus, we must utilize probability theory. It is also necessary to clearly define the level of stress involved (e.g. operating voltage, ripple current, temperature and time). Finally, the meaning of satisfactory performance must be defined by specifying a set of conditions which determine the end of life of the component. 

Reliability as a function of time, R(t), is normally expressed as:  R(t)=e-[λt] 

where R(t) is the probability that the component will perform satisfactorily for time t, and λ is the failure rate. 

## **Failure Rate** 

- The failure rate is the number of components failing per unit time. The failure rate of most electronic components follows the characteristic pattern: 

- Early failures are removed during the manufacturing process. 

- The operational life is characterized by a constant failure rate. 

- The wear out period is characterized by a rapidly increasing failure rate. 

The failures in time (FIT) are given with a 60% confidence level for the various type codes. By convention, FIT is expressed as 

1 x 10[-9] failures per hour. Failure rate is also expressed as a percentage of failures per 1,000 hours. 

e.g., 100 FIT = 1 x 10[−7] failures per hour = 0.01%/1,000 hours 

## **End of Life Definition** 

Catastrophic Failure: short circuit, open circuit or safety vent operation Parametric Failure: 

- Change in capacitance > ±10% 

- Leakage current > specified limit 

- ESR > 2 x initial ESR value 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

A4046_ALP_T22_23 • 8/8/2023 

5 

Pin/Solder Tag – ALP22 and ALT22/23 Series, +85°C 

## **NOT FOR NEW DESIGN** 

## **MTBF** 

The mean time between failures (MTBF) is simply the inverse of the failure rate. MTBF= 1/λ 

**==> picture [241 x 148] intentionally omitted <==**

**----- Start of picture text -----**<br>
early failures wear out<br>operational life<br>Time<br>Failure Rate<br>**----- End of picture text -----**<br>


## **Environmental Compliance** 

As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental effects of both our capacitors and their production. In Europe (RoHS Directive) and in some other geographical areas like China, legislation has been put in place to prevent the use of some hazardous materials, such as lead (Pb), in electronic equipment. All products in this catalog are produced to help our customers’ obligations to guarantee their products and fulfill these legislative requirements. The only material of concern in our products has been lead (Pb), which has been removed from all designs to fulfill the requirement of containing less than 0.1% of lead in any homogeneous material. KEMET will closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever needed. 

Some customer segments such as medical, military and automotive electronics may still require the use of lead in electrode coatings. To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for RoHS compatible capacitors. 

Because of customer requirements, there may appear additional markings such as LF = Lead Free or LFW = Lead Free Wires on the label. 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

A4046_ALP_T22_23 • 8/8/2023 

6 

## **NOT FOR NEW DESIGN** 

Pin/Solder Tag – ALP22 and ALT22/23 Series, +85°C 

## **Table 1A – Ratings & Part Number Reference (ALP)** 

**==> picture [543 x 311] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rated  Capacitance<br>VDC Size Code Case Size Part Number<br>Capacitance (µF) Tolerance<br>40 4,700 20% AB 25 x 45 ALP22A472AB040<br>40 6,800 20% BB 30 x 45 ALP22A682BB040<br>40 10,000 20% CB 35 x 45 ALP22A103CB040<br>40 15,000 20% CD 35 x 55 ALP22A153CD040<br>40 22,000 20% DD 40 x 55 ALP22A223DD040<br>63 2,700 20% AB 25 x 45 ALP22A272AB063<br>63 4,700 20% BB 30 x 45 ALP22A472BB063<br>63 10,000 20% CD 35 x 55 ALP22A103CD063<br>63 10,000 20% DD 40 x 55 ALP22A103DD063<br>63 15,000 20% DE 40 x 75 ALP22A153DE063<br>100 1,000 20% AB 25 x 45 ALP22A102AB100<br>100 4,700 20% DD 40 x 55 ALP22A472DD100<br>100 10,000 20% DF 40 x 105 ALP22A103DF100<br>200 220 20% AB 25 x 45 ALP22A221AB200<br>200 680 20% CD 35 x 55 ALP22A681CD200<br>200 680 20% DB 40 x 45 ALP22A681DB200<br>200 1,000 20% DD 40 x 55 ALP22A102DD200<br>200 2,200 20% DF 40 x 105 ALP22A222DF200<br>385 220 20% CB 35 x 45 ALP22A221CB385<br>385 470 20% DD 40 x 55 ALP22A471DD385<br>385 680 20% DE 40 x 75 ALP22A681DE385<br>385 1,000 20% DF 40 x 105 ALP22A102DF385<br>450 100 20% BB 30 x 45 ALP22A101BB450<br>450 220 20% CD 35 x 55 ALP22A221CD450<br>450 470 20% DE 40 x 75 ALP22A471DE450<br>450 680 20% DF 40 x 105 ALP22A681DF450<br>450 820 20% DF 40 x 105 ALP22A821DF450<br>450 1,000 20% DE 40 x 75 ALP22A102DE450<br>VDC Rated Capacitance Capacitance  Size Code Case Size Part Number<br>(µF)  Tolerance<br>**----- End of picture text -----**<br>


© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

A4046_ALP_T22_23 • 8/8/2023 

7 

## **NOT FOR NEW DESIGN** 

Pin/Solder Tag – ALP22 and ALT22/23 Series, +85°C 

## **Table 1B – Ratings & Part Number Reference (ALT)** 

**==> picture [543 x 221] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rated  Capacitance<br>VDC Size Code Case Size Part Number<br>Capacitance (µF) Tolerance<br>40 4,700 20% AB 25 x 45 ALT22A472AB040<br>40 10,000 20% CB 35 x 45 ALT22A103CB040<br>40 15,000 20% CD 35 x 55 ALT22A153CD040<br>40 22,000 20% DD 40 x 55 ALT22A223DD040<br>63 4,700 20% BB 30 x 45 ALT22A472BB063<br>63 10,000 20% CD 35 x 55 ALT22A103CD063<br>63 15,000 20% DE 40 x 75 ALT22A153DE063<br>100 1,000 20% AB 25 x 45 ALT22A102AB100<br>100 4,700 20% DD 40 x 55 ALT22A472DD100<br>100 10,000 20% DF 40 x 105 ALT22A103DF100<br>200 220 20% AB 25 x 45 ALT22A221AB200<br>200 680 20% DB 40 x 45 ALT22A681DB200<br>200 1,000 20% DD 40 x 55 ALT22A102DD200<br>200 2,200 20% DF 40 x 105 ALT22A222DF200<br>385 100 20% AB 25 x 45 ALT22A101AB385<br>385 150 20% BB 30 x 45 ALT22A151BB385<br>385 470 20% DD 40 x 55 ALT22A471DD385<br>385 1,000 20% DF 40 x 105 ALT22A102DF385<br>VDC Rated Capacitance Capacitance  Size Code Case Size Part Number<br>(µF)  Tolerance<br>**----- End of picture text -----**<br>


## **Print Detail** 

- KEMET Logo 

- Rated capacitance 

- Capacitance tolerance 

- Rated voltage 

- Climatic Category 

- Date of manufacture and Batch No. 

- Article code 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

A4046_ALP_T22_23 • 8/8/2023 

8 

Pin/Solder Tag – ALP22 and ALT22/23 Series, +85°C 

## **NOT FOR NEW DESIGN** 

## **Construction Data** 

The manufacturing process begins with the anode foil being electrochemically etched to increase the surface area and then “formed” to produce the aluminum oxide layer. Both the anode and cathode foils are then interleaved with absorbent paper and wound into a cylinder. During the winding process, aluminum tabs are attached to each foil to provide the electrical contact. 

The deck, complete with terminals, is attached to the tabs and then folded down to rest on top of the winding. The complete winding is impregnated with electrolyte before being housed in a suitable container, usually an aluminum can, and sealed. Throughout the process, all materials inside the housing must be maintained at the highest purity and be compatible with the electrolyte. 

Each capacitor is aged and tested before being sleeved and packed. The purpose of aging is to repair any damage in the oxide layer and thus reduce the leakage current to a very low level. Aging is normally carried out at the rated temperature of the capacitor and is accomplished by applying voltage to the device while carefully controlling the supply current. The process may take several hours to complete. 

Damage to the oxide layer can occur due to variety of reasons: 

- Slitting of the anode foil after forming 

- Attaching the tabs to the anode foil 

- Minor mechanical damage caused during winding 

A sample from each batch is taken by the quality department after completion of the production process. 

The following tests are applied and may be varied at the request of the customer. In this case the batch, or special procedure, will determine the course of action. 

Electrical: 

Mechanical/Visual: 

- Leakage current 

   - Overall dimensions 

   - Torque test of mounting stud 

- Capacitance 

   - Print detail 

- ESR 

- Impedance 

   - Box labels 

- Tan Delta 

- Packaging, including packed quantity 

**==> picture [253 x 178] intentionally omitted <==**

**----- Start of picture text -----**<br>
Extended cathode<br>Anode foil<br>Foil tabs<br>Tissues<br>Cathode foil<br>**----- End of picture text -----**<br>


**==> picture [204 x 374] intentionally omitted <==**

**----- Start of picture text -----**<br>
Etching<br>Forming<br>Winding<br>Decking<br>Impregnation<br>Assembly<br>Aging<br>Testing<br>Sleeving<br>Packing<br>**----- End of picture text -----**<br>


© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

A4046_ALP_T22_23 • 8/8/2023 

9 

Pin/Solder Tag – ALP22 and ALT22/23 Series, +85°C 

## **NOT FOR NEW DESIGN** 

## 

## **Disclaimer** 

All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. 

Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. 

Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. 

Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. 

KEMET requires its products to be packaged and shipped on pallets. This is because KEMET’s products are specifi cally designed to be packed onto pallets during shipment. If for any reason, the products are removed from pallets by the shipping party and shipped to the end customer, then additional external protection is required. In this instance, an external box with two carton layers and an upwards orientation sticker must be used by the shipping party, with the empty space fi lled with fi lling material, and afterwards sealing the box. If this packing and packaging guideline is not followed by the shipping party, the shipping party, and not KEMET, will be held responsible for any packaging, packing and/or product damages upon delivery of the products to the end customer. KEMET hereby disclaims any liability for damages to the products or otherwise that have been, or threaten to be, infl icted, result from or are in any way related to the packaging, packing or damage by the shipping party in contravention of the packing and packaging guidelines herein. 

_KEMET is a registered trademark of KEMET Electronics Corporation._ 

© KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

A4046_ALP_T22_23 • 8/8/2023 

10