975.845.10

## **KOMPAKT** 

## **The complete Signal Tower Solution** 

## **KOMPAKT 71** 

With the help of these compact LED signal towers two or three defined status warnings can be displayed with only one signal device. The tower is very economical due to the long life duration of up to 50,000 hours and low current consumption. 

Also available with USB Interface 

## vy 

## **The advantages at a glance** 

Completely pre-assembled LED Signal Tower 

- Simplified ordering - the complete tower can be ordered with just one number 

- Life duration of up to 50,000 hours 

- High protection rating IP 65 

**76** 

www.werma.com 

**LED Signal Tower KOMPAKT 71** 

**697** 

- Completely pre-assembled 

•  70 mm diameter 

- Three colour combinations 

**TEChNiCAL SPECiFiCATiONS:** Dimensions (Ø x Height): 2 tier: 70 x 140 mm 3 tier: 70 x 175 mm ~~7 =~~ Housing: Housing parts: PC Terminal element: PA fibreglass, high-impact Fixing: Base/Bracket mounting Tube mounting (accessory) Connection: Screw terminal max. 2.5 mm[2] Cable entry: Cable diameter max. 14 mm Current consumption: 40 mA per tier 

## **OrDEr SPECiFiCATiONS:** 

## KOMPAKT 71 

Mounting 24 V DC 2 tier red/green Base/bracket mounting 697 010 55 red/green Tube mounting 697 410 55 3 tier red/yellow/green Base/bracket mounting 697 000 55 red/yellow/green Tube mounting 697 400 55 KOMPAKT 71 with negative logic (common +) Mounting 24 V DC 3 tier red/yellow/green Base/bracket mouting 697 100 55 red/yellow/green Tube mounting 697 500 55 

## **ACCESSOriES:** 

see page 79 

## **TEChNiCAL DiAgrAMS:** 

see page 312 

**Base with tube (accessory)** 

**==> picture [253 x 44] intentionally omitted <==**

**----- Start of picture text -----**<br>
See note<br>on page 347 2 tier 3 tier<br>+50°C<br>170 g 200 g IP 65 PLC<br>H -20°C H<br>**----- End of picture text -----**<br>


**77** 

www.werma.com 

**697** 

## **LED Signal Tower KOMPAKT 71 with USB interface** 

**Completely pre-assembled signal tower with integrated USB terminal element** 

- Completely pre-assembled signal • Actuation via a DLL (Dynamic Link tower with integrated USB terminal Library) or VCP (Virtual-COM-Port) element 

   - No additional power supply or hardware necessary 

- No additional voltage supply or hardware is required 

- Direct triggering of signal tower via USB Interface 

**TEChNiCAL SPECiFiCATiONS:** a Dimensions (Ø x Height): 70 mm x 175 mm ~~—~~ Housing: Housing parts: PC Terminal element: PA-GF, high-impact Fixing: Tube mounting (accessory) Conne ~~ction:~~ Via USB Power supply: Via USB (5 V DC) Assembly: Assembly includes installation software, drivers, handbook and USB connection cable (length 1.8 m) Suitable for: Windows 2000 service pack 4, Windows XP, Windows Vista or Windows 7. Also for Windows Server and Windows CE operating systems. 

## **OrDEr SPECiFiCATiONS:** 

**The user-friendly demonstration software is included in the assembly** 

|3 tier<br>red/yellow/green|697 430 53|
|---|---|
|**ACCESSOriES:**||
|||
|Base with integrated tube|975 840 10|
|Base with tube,metal|975 840 91|
|Tube Ø 25 mm, all anodized aluminium||
|100 mm long|975 845 10|
|250 mm long|975 840 25|
|400 mm long|975 840 40|
|600 mm long|975 840 60|
|800 mm long|975 840 80|
|1000 mm long|975 840 03|



## **TEChNiCAL DiAgrAMS:** 

see page 312 

**Direct triggering via USB interface (assembly without laptop and accessories)** 

See note on page 347 +50°C 300 g IP 65 c€ FlTe@a@ oe ~~ie~~ -20°C 

**78** 

www.werma.com 

## **Accessories for KOMPAKT 71** 

|st<br>~|||**OrDEr SPECiFiCATiONS ACCESSOriES KOMPAKT 71:**<br>Contact box for Câble exit at side,<br>with mounting material<br>Contact box with magnetic base<br>and Câble exit at side<br>Bracket for tube mounting<br>with Câble gland|**OrDEr SPECiFiCATiONS ACCESSOriES KOMPAKT 71:**<br>975 840 01<br>975 840 04<br>960 000 01|
|---|---|---|---|---|
|yr|||Bracket for surface mounting<br>with Câble gland|960 698 05|
|poe|||Bracket for base mounting<br>with concealed Câble entry, incl. rubber seals|960 000 14|
|(esse|||Bracket for 1-sided<br>mounting, incl. rubber seals|975 840 85|
|—|||Bracket for 2-sided<br>mounting, incl. rubber seals|975 840 86|
|NEW<br>=~|||Corner fixing bracket|960 000 41|
||||**TEChNiCAL DiAgrAMS:**||
||||see page 327 onwards||



**79** 

www.werma.com 

**Accessories for KOMPAKT 71** 

**==> picture [481 x 718] intentionally omitted <==**

**----- Start of picture text -----**<br>
OrDEr SPECiFiCATiONS ACCESSOriES KOMPAKT 71:<br>Tube with clamp, Ø 25 mm  960 000 18<br>250 mm long, with Câble gland<br>Tube Ø 25 mm, all anodized aluminium<br>  100 mm long 975 845 10<br> 250 mm long 975 840 25<br> 400 mm long  975 840 40<br> 600 mm long  975 840 60<br> 800  mm l ong  975 840 80<br> 1000 mm long  975 840 03<br>t<br>Foldaway Base incl. rubber seals, suitable for tube,  960 000 30<br>Ø 25 mm, all anodized aluminium (not included in assembly)<br>Dimensions (Ø x Height):  70 mm x 117 mm<br>Material:  PA-GF<br>Câble diameter:  max. 14 mm<br>Assembly:  incl. rubber seals<br>Fixing:  Vertical, horizontal,<br>Positioning in 7.5° steps<br>QUICK AND SIMPLE MOUNTING:<br>1 2 3 4<br>Place the lower part of the  Attach the upper part directly  Place the upper and lower  Place the upper and lower<br>Foldaway Base in the desi- onto the signal tower tube.  parts together at the desi- parts together at the desi-<br>rouge position Insert the Connexion Câble rouge angle rouge angle<br>“es abba Foldaway Base incl. rubber seals, suitable for tube,  960 009 12<br>Ø 25 mm, all anodized aluminium (not included in assembly)<br>Dimensions (Ø x Height):  70 mm x 85 mm<br>Material:  PA-GF<br>Câble diameter:  max. 8 mm<br>a Assembly:  incl. rubber seals<br>Fixing:  Vertical, horizontal,<br>Positioning in 0° and 90°<br>QUICK AND SIMPLE MOUNTING:<br>1 2 3 4<br>Place the „foldaway“ base  Attach the tube adaptor  Fix the whole assembly - tube  Place the cover on the<br>in the desirouge mounting  directly to the signal tower  adaptor and signal tower, in  other open end<br>position and introduce the Câble the desirouge position, verti-<br>cally or horizontally - onto the<br>foldaway base<br>www.werma.com<br>a<br>Utility model<br>approved<br>NEW<br>**----- End of picture text -----**<br>


**80** 

| 

**==> picture [274 x 581] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||
|---|---|
|OrDEr SPECiFiCATiONS ACCESSOriES KOMPAKT 71:|
|Tube Ø 25 mm, plastic|960 000 31|
|for mounting the Terminal Element directly|
|on the Foldaway Base|
|Base for tube mounting Ø 25 mm,|975 840 90|
|plastic, incl. rubber seal|
|Base for tube mounting Ø 25 mm, metal, incl. rubber seal,|975 840 91|
|recommended for tube lengths of 400 mm and longer|
|Base with integrated tube, Ø 25 mm,|975 840 10|
|110 mm long, plastic, incl. rubber seal|
|Adaptor for tube mounting,|975 840 02|
|Ø 25 mm / 1/2” NPT thread|
|Adaptor for single hole mounting|960 000 25|
|Ø 25 mm, M18|
|Câble gland for|960 000 04|
|surface mounting M16 x 1.5 mm|
|TEChNiCAL DiAgrAMS:|
|see page 327 onwards|

**----- End of picture text -----**<br>


**81** 

www.werma.com