972K-A

## ® Scotchlok 972 Self-Stripping In-Line Blade lype Fuseholder 

## Product Information 

Application: Installation instructions: Use Part No. 972 to install a blade type autoCaution - turn power off before installing connector. motive fuse between power source and device. All electrical work should be done according to Wire Renge: oppropriate electrical codes. 18-14 AWG Solid or Stranded, tinned or |. Cut wires but do not strip insulation from untinned (.75-1.5mm™ sol. or str.) copper wire ends. . . conductors. For use with common thermo2. Insert a wire end into one of the wire chanplostic insulated wires such as: nels until it butts up against the wire stop. SAE~-GPT, T, TF, TFF, TW with a moximum 3. Fold that half of the connector body over insulation diameter of 145 inches (3.5mm). until the element contacts the wire. Maximum recommended connector current: 4. Crimp that half of the connector closed 18 AWG - 7.5 AMPS, I6 AWG - IO AMPS, with a mechanics (slip joint) pliers. 14 AWG - 20 AMPS. 5. Repeat steps 2, 3 and 4 for the other wire. NOTE: All wire insulctions may not be suitable 6. Slide fuse all the way into the fuse port. for these current levels under all conditions. # NOTE: Fuse not included Check appropriate requirements for specific Recommended Installation Tools: applications. Mechonics (slip joint) Pliers Construction: ecommen emper . U-Contact - Tin plated copper alloy, Rees meneet voitage ane / ature Retings: Insulator - Polypropylene,-03 in. (.8mm) thick 105°C (221°F) maximum. Wei ght: color — blue .0052 Ib. (2.36 gm) inch (mm) “al9, (* “PO Se AXS> Nal Pay3 USARS VL; nad > ed. p N iS Q LESS OI a THES OO SASH O EP th OSEAN 25 Ai b J : 0 ha ENGINEERING SPECIFICATION: Self-stripping in-line automotive blade type fuseholder (os monufactured by 3M, Port No. 972) capable of connecting to two No. 18 thru two No. 14 AWG solid or stranded wires. Connector shall be voltage rated 32 volts maximum, ond temperature rated 105°C maximum. Important Notice: All stotements, technical information and recommendations contained herein are based on tests we believe to be relicble, but the accuracy or completeness thereof is not guaranteed, ond the following is made in lieu of all warranties, express or implied: Seller's ond menufacturer's only obligation shal! be to replace such quontity of the product proved to be defective. ‘Neither seller nor manufacturer shal! be Hable for any injury, loss or damoge, direct or consequential, arising out of theuse, useand ofuseror assumesinability allto risksuse theand Proceliability Beforewhatsoeverusing,inuserconnectionshall determinetherewith.theStotementssuitability orof recommendationsthe product for nothis containedintended herein shail have no force or effect unless in on agreement signed by officers of seller and manufacturer. 5/86 ee ELECTRICAL PRODUCTS DI VESION/3M oo 3M AUSTIN CENTER -- 145-4N-02 ‘AUSTIN, TX 78769-2963 =. - (512) 984-5555 

**==> picture [469 x 687] intentionally omitted <==**

**----- Start of picture text -----**<br>
56 "4 f<br>xc S\<br>a=a = i “Y<br>y 4 @<br>Wind fe<br>y/<br>wv<br>**----- End of picture text -----**<br>