Novapart logo
947D881K901BLMSN — Power Film Capacitor, Metallized PP, Can, 880 µF, ± 10%, DC Link, Stud Mount - M12
Illustrative purposes only
This product is RoHS compliant

947D881K901BLMSN

Power Film Capacitor, Metallized PP, Can, 880 µF, ± 10%, DC Link, Stud Mount - M12

  • Manufacturer: CORNELL DUBILIER
  • Product type: Power Film Capacitors
  • Capacitance:880µF; Voltage Rating:900V; Capacitor Dielectric Type:PP (Polypropylene); Capacitance Tolerance:± 10%; Product Range:947D Series; Capacitor Cas; Available until stocks are exhausted
  • ESR: 2100µohm
  • SVHC: No SVHC (23-Jan-2024)
  • Height: 90mm
  • Capacitance: 880µF
  • Voltage(AC): 250V
  • Voltage(DC): 900V
  • Lead Spacing: 45mm
  • Peak Current: -
  • dv/dt Rating: -
  • Output (kvar): -
  • Product Range: 947D Series
  • Product Width: -
  • Qualification: -
  • Product Height: 90mm
  • Product Length: -
  • Ripple Current: -
  • Dielectric Type: Metallized PP
  • Humidity Rating: -
  • Product Diameter: 162mm
  • Capacitor Mounting: Stud Mount - M12
  • RMS Current (Irms): 67A
  • Capacitor Terminals: Screw
  • Typical Applications: DC Link
  • Capacitance Tolerance: ± 10%
  • Capacitor Case / Package: Can
  • Operating Temperature Max: 85°C
  • Operating Temperature Min: -45°C
Delivery and price
Units per pack 1
Price 131.6 €
Current stock 10+
Lead time 30 days

Updated at June 10, 2026

About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.

Learn more →

Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.

Request a quote →

Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.

BOM Analysis service →