Novapart logo
941C20W1K-F — Power Film Capacitor, Double Metallized PP, 1 µF, ± 10%, Snubber, Through Hole
Illustrative purposes only
This product is RoHS compliant

941C20W1K-F

Power Film Capacitor, Double Metallized PP, 1 µF, ± 10%, Snubber, Through Hole

  • Manufacturer: CORNELL DUBILIER
  • Product type: Power Film Capacitors
  • Capacitance:1µF; Voltage Rating:2kV; Capacitor Dielectric Type:PP (Polypropylene); Capacitance Tolerance:± 10%; Product Range:941C Series; Capa; Available until stocks are exhausted
  • ESR: 5000µohm
  • SVHC: No SVHC (23-Jan-2024)
  • Height: 54mm
  • Capacitance: 1µF
  • Voltage(AC): 500V
  • Voltage(DC): 2kV
  • Lead Spacing: -
  • Peak Current: 754A
  • dv/dt Rating: 754V/µs
  • Output (kvar): -
  • Product Range: 941C Series
  • Product Width: 45.6mm
  • Qualification: -
  • Product Height: -
  • Product Length: 54mm
  • Ripple Current: -
  • Dielectric Type: Double Metallized PP
  • Humidity Rating: -
  • Product Diameter: -
  • Capacitor Mounting: Through Hole
  • RMS Current (Irms): 19.4A
  • Capacitor Terminals: Axial Leaded
  • Typical Applications: Snubber
  • Capacitance Tolerance: ± 10%
  • Capacitor Case / Package: -
  • Operating Temperature Max: 105°C
  • Operating Temperature Min: -55°C
Delivery and price
Units per pack 54
Price 7.06 €
Current stock 1000+
Lead time 30 days

Updated at June 10, 2026

About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.

Learn more →

Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.

Request a quote →

Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.

BOM Analysis service →