9013GHG2J63X

Product data sheet Characteristics 

pump or compressor switch 9013GH - adjustable diff. - 145-175 psi 

## 9013GHG2J63X 

## Main 

|Range of product<br>Pressure sensor name<br>Pressure sensor size<br>Value of setting<br>Electrical circuit type<br>Product specific application<br>Quantity per set<br>Type of packing|Square D Pumptrol<br>9013GH<br>1378.95 kPa (275.79…1172.11 kPa)<br>145...175 psi<br>Power circuit<br>Control electrically driven water pumps and air compressors<br>1<br>Individual|
|---|---|



## Complementary 

|Pressure sensor type<br>Controlled fluid<br>Adjustable range on rising pressure<br>Approximate adjustable differential<br>Destruction pressure<br>Pressure actuator<br>Pressure switch type of operation<br>Scale type<br>Setting<br>Local display<br>Contacts type and composition<br>Cable entry number<br>Electrical connection<br>Fluid connection type<br>Short-circuit protection<br>Materials in contact with fluid|Electromechanical pressure switch<br>Air (-30…125 °C)<br>Fresh water (-30…125 °C)<br>448.16…1378.95 kPa<br>137.90…275.79 kPa<br>2068.43 kPa<br>Diaphragm<br>Regulation between 2 thresholds<br>Adjustable differential<br>Internal<br>Without<br>2 NC, snap action, DPST-DB, Form YY<br>3 knock-outs for 1/2" conduit conforming to UL 508<br>Screw-clamp terminals, clamping capacity: 10 AWG<br>Screw-clamp terminals, clamping capacity: 5.261 mm²<br>0.25 inch NPSF internal conforming to UL 508<br>20 A cartridge fuse, type gG<br>Zinc plated steel or equivalent flange|
|---|---|



**==> picture [6 x 456] intentionally omitted <==**

**----- Start of picture text -----**<br>
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications<br>**----- End of picture text -----**<br>


Jun 24, 2020 

1 

**==> picture [323 x 322] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||
|---|---|
|Nitrile (Buna-N) or equivalent rubber diaphragm|
|Material|Polypropylene: cover|
|Noryl thermoplastic resin or equivalent: cover|
|Operating position|Any position|
|Motor power kW|1.5 kW (2 hp) at 115 V AC, 1 phase|
|2.2 kW (3 hp) at 115 V AC, 3 phases|
|2.2 kW (3 hp) at 230 V AC, 1 phase|
|0.75 kW (1 hp) at 115 V DC|
|0.75 kW (1 hp) at 230 V DC|
|3.75 kW (5 hp) at 230 V AC, 3 phases|
|3.7 kW (5 hp) at 460 V AC, 1 phase|
|3.7 kW (5 hp) at 460 V AC, 3 phases|
|3.7 kW (5 hp) at 575 V AC, 1 phase|
|3.7 kW (5 hp) at 575 V AC, 3 phases|
|Electrical durability|100000 cycles, operating rate <10 cyc/mn|
|Mechanical durability|300000 cycles|
|Terminal block type|4 terminals|
|Maximum operating rate|10 cyc/mn|
|[Ui] rated insulation voltage|575 V conforming to UL 508|
|Net weight|1.02 kg|
|Repeat accuracy|+/- 3 %|
|Terminals description ISO n°1|L1-T1|
|L2-T2|
|Width|106.43 mm|
|Height|137.16 mm|
|Depth|98.55 mm|
|Factory modification|2-way pressure release valve|

**----- End of picture text -----**<br>


## Environment 

**==> picture [261 x 119] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||
|---|---|
|Standards|CE|
|NSF ANSI 372|
|UL 508|
|Ambient air temperature for operation|-36…125 °C|
|Ambient air temperature for storage|-36…125 °C|
|Protective treatment|None|
|NEMA degree of protection|NEMA 1 conforming to UL 50|
|IP degree of protection|IP20 conforming to IEC 60529|
|Product certifications|UL listed file E12158|
|CSA file LR25490|

**----- End of picture text -----**<br>


**==> picture [372 x 115] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||
|---|---|
|Offer Sustainability|
|Sustainable offer status|Green Premium product|
|REACh Regulation|REACh Declaration|
|EU RoHS Directive|Pro-active compliance (Product out of EU RoHS legal scope)|
|EU RoHS Declaration|
|Mercury free|Yes|
|RoHS exemption information|Yes|
|Environmental Disclosure|Product Environmental Profile|
|Circularity Profile|End of Life Information|

**----- End of picture text -----**<br>


## Contractual warranty 

Warranty 18 months 

2