890334026024CS

**==> picture [806 x 543] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties:<br>ee Properties Test conditions ee ee es Value ee Unit Tol.<br>— _ ee Capacitance 1 V/ 1 kHz ± 0.2 kHz es es C 820 es nF ±10%<br>| | ee Rated Voltage es es UR  es 310 V (AC) max.<br>Rated Voltage UR 630 V (DC) max.<br>Insulation Resistance 1 min @ 100 V (DC) RISO 10000 Ω x F min.<br>P<br>Dissipation Factor @ 1 kHz DF 0.1 % max.<br>ms a<br>Dissipation Factor @ 10 kHz DF 0.7 % max.<br>_ | - eees es es<br>p ee Rate of Voltage Rise dV/dt 160 V/µs max.<br>=e ———<br>L<br>Dielectric Strength Pin toPin 1 min./ +20 °C 1333 V (DC)<br>ee<br>——— e es es<br>Dielectric Strength Pin toCase 1 min./ +20 °C 2000 V (AC)<br>ee<br>Schematic:<br>|<br>General Information:<br>X2-Safety Class Capacitor; MKP - Metallized Polypropylene<br>Storage Conditions 5-35 °C, < 75% RH<br>Operating Temperature -40 °C up to +105 °C<br>Maxium Selfheating (Rated) 7 °C<br>Climate Category: 40/ 105/ 56/ B<br>Test conditions of Electrical Properties: +20 °C, 35% RH if not specified differently<br>Cer 6 I<br>FIT according to separate documentation<br>Marking - ost” Component conform to REACh and RoHS requirements and standards<br>] Only designed to be used in parallel to the mains, not approved for series applications.<br>Properties Value Unit Tol.<br>Pitch P 22.5 mm ±0.5<br>Length L 26 mm ±0.5 Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive Solutions CREATEDKaS CHECKEDPSL GENERAL TOLERANCEDIN ISO 2768-1m PROJECTIONMETHOD<br>Width W 9 mm ±0.5<br>Max-Eyth-Str. 1 DESCRIPTION TECHNICAL REFERENCE<br>Height H 18 mm ±0.5 74638 WaldenburgGermany WCAP-FTXX Film Capacitors MXXP225824K310ACPP36004<br>Pin length G 4 mm ±0.5 Tel. +49 (0) 79 42 945 - 0 _ ORDER CODE<br>Pin Diameter Ø F 0.8 mm ±0.05 www.we-online.comeiSos@we-online.com 890334026024CS<br>Pitch p 22.5 mm ±0.5 SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE<br>Hole Diameter Ø f 1.1 mm Pitch 22.5 002.000 Valid 2018-03-01 eiCap 1/8<br>SSS —<br>This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH<br>& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety<br>must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.<br>F<br>O f<br>O<br>H<br>G<br>W<br>**----- End of picture text -----**<br>


## **Product Marking:** 

|**Product Marking:**|||
|---|---|---|
|**1st Line right**|Matchcode: FTXX||
|**2nd Line right**|Rated Voltage: 310 V~||
|**3rd Line right**|Climate Category: 40/ 105/ 56/ B|Climate Category: 40/ 105/ 56/ B|
|**2nd Line left**|Capacitance & Tolerance Code: 824K (Basis pF)|Capacitance & Tolerance Code: 824K (Basis pF)|
|**Bottom Line**|Certificates: ENEC, cULUS, CQC & Internal Marking|Certificates: ENEC, cULUS, CQC & Internal Marking|
|**Top Cover Marking P < 15**|Date Code: YWW||
|**Top Cover Marking P ≥ 15**|Date Code & Capacitance & Tolerance Code|Date Code & Capacitance & Tolerance Code|



|**Properties**|Standard||
|---|---|---|
|**Damp Heat**|IEC 60068 - 2 - 78|40°C, 95% RH, 56 days|
|**Temperature**<br>**Cycles**|IEC 60068 - 2 - 14|5 cycles, upper and lower temperature 30 min. each, 30 sec. transfer<br>time|
|**Charge/**<br>**Discharge Test**|IEC 60384 - 14|√2 x UR @ 100 V/μs|
|**Surge Test**|IEC 60384 - 14|2.5 kV Surge impulses|



## **Certification:** 

|**Properties**|**Standard**|**File**||
|---|---|---|---|
|**ENEC10 by VDE**|IEC 60384-14|40038405||
|**cULus**|UL 60384-14 / CAN/CSA - E60384-14|E345659||
|**CQC**|IEC 60384-14|13001104051|13001104051|



## **Mechanical Properties:** 

|**Properties**|||**Test Conditions**||||**Lead Diameter [mm]**|**Force [N]**<br>**condition**|**Force [N]**<br>**condition**||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|**Termination Robustness**|||IEC 600668 - 2 - 21|Pull Test|||0.5 to ≤ 0.8|10|min. 10 sec.||||||||||||
||||||||0.9 to ≤ 1.25|20|min. 10 sec.||||||||||||
|||||Bend Test|||0.5 to ≤ 0.8|5|min. 2 cycles||||||||||||
||||||||0.9 to ≤ 1.25|10|min. 2 cycles||||||||||||
|**Environmental Tests:**|**Environmental Tests:**||||||||||||||||||||
|**Properties**|**Standard**||||||||||||||||||||
|**Active**<br>**Flammability**|IEC 60384-14|||||max. 24 surge pulses @ 2.5 kV (one pulse every 5 seconds)|max. 24 surge pulses @ 2.5 kV (one pulse every 5 seconds)||||||||||||||
|**Passive**<br>**Flammability**|IEC 60384-14|||||in combination with IEC 60381 - 1 & IEC 60695 - 11 - 5|||||||||||||||
|**Vibration**|IEC 60068 - 2 - 6||IEC 60068 - 2 - 6|||all 3 directions, 2 hours each @ 10 - 55 - 10 Hz, amplitude 0.75 mm or<br>10 g|||||||||||||||
||||||||||Würth Elektronik eiSos GmbH & Co. KG<br>EMC & Inductive Solutions<br>Max-Eyth-Str. 1<br>74638 Waldenburg<br>Germany<br>Tel. +49 (0) 79 42 945 - 0<br>www.we-online.com<br>eiSos@we-online.com<br>pe|||CREATED<br>CHECKED<br>GENERAL TOLERANCE<br>PROJECTION<br>METHOD<br>KaS<br>PSL<br>DIN ISO 2768-1m<br>DESCRIPTION<br>TECHNICAL REFERENCE<br>**WCAP-FTXX Film Capacitors**<br>MXXP225824K310ACPP36004<br>ORDER CODE<br>**890334026024CS**<br>SIZE<br>REVISION<br>STATUS<br>DATE (YYYY-MM-DD)<br>BUSINESS UNIT<br>PAGE<br>Pitch 22.5<br>002.000<br>Valid<br>2018-03-01<br>eiCap<br>2/8<br>~~ee~~<br>~~ee =~~~~**e**~~<br>~~ee~~|||||||||



## **Environmental Tests:** 

This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 

## **Dissipation Factor vs. Temperature:** 

## **Dissipation Factor vs. Frequency:** 

**==> picture [793 x 496] intentionally omitted <==**

**----- Start of picture text -----**<br>
1.20 1.000<br>PO Et<br>pi fi fit tp TP a a<br>HEE EEE EEE EEE EEE EEE aYM<br>COPE EC EEE<br>1.00<br>PEE CE EE EEEE E EEEEEEE EEE EE EE EEEEEEEEEEEEE EEE EE E E EEE aHIee |<br>COPE EEE EEE /<br>0.80 POPE /<br>COC<br>CCPCPEPE ECEEEEEEE /<br>COPE EEE EEE (<br>0.60 0.100<br>4<br>PEECCEEEE CECE CECE HEtt pt}<br>PEEPpeat eeA<br>EF tt a<br>EPI ddd EEE A a<br>0.40<br>PUPP PAE A<br>PECEEEEEECEEBRRCECEEEEEPitt ete EEE ENE ELE EEEEE EEEEAE PAA temaT IE TT<br>PUPPET<br>PECEPE EN EEE A<br>0.20 PEPE NE et<br>COPE<br>SSS ert<br>COPE<br>COPE EEEEEE<br>COPE EEEEEE<br>PUPAE<br>0.00 0.010<br>-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 1.0 10.0 100.0 1000.0<br>Temperature [°C] Frequency [kHz]<br>Würth Elektronik eiSos GmbH & Co. KG CREATED CHECKED GENERAL TOLERANCE PROJECTIONMETHOD<br>EMC & Inductive Solutions KaS PSL DIN ISO 2768-1m<br>ee<br>Max-Eyth-Str. 1 DESCRIPTION ee TECHNICAL REFERENCE ee<br>74638 Waldenburg<br>Germany WCAP-FTXX Film Capacitors MXXP225824K310ACPP36004<br>Tel. +49 (0) 79 42 945 - 0<br>www.we-online.comeiSos@we-online.com —_____= in eee ORDER CODE 890334026024CS<br>= SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE<br>“WE==<br>See> Pitch 22.5 002.000 Valid 2018-03-01 eiCap 3/8<br>Dissipation Factor [%] Dissipation Factor [%]<br>**----- End of picture text -----**<br>


This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 

## **Capacitance Change vs. Frequency:** 

## **Capacitance Change vs. Temperature:** 

**==> picture [785 x 496] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.50 [| |. | T1111. [| TITIIII 6.0<br>—SOaOG GO PEEEEEEEEELEEEEEE EEEPEEL<br>0.30 ee PEECEEEEEEEEEEEEEEEEEEEEEEEEE<br>SS AOOGO 4.0 CECE<br>at FEEEEEEEEEEEEEECECECEEEEE<br>0.10<br>SO————-+OG ————-+OO PEELEE E ErE<br>— =ES ES A ES SSSSea PEECEEEEEEEEEEE<br>2.0<br>aS EEE EEE<br>-0.10<br>CO \<br>aSS i SSDOee0ee eaeeestOO TTPPSRSETEEEEEEEEEEEENELLICECE CECE CECE E E EEE<br>OGSO OO iti tT] PA< EE<br>-0.30 a OS 0.0 pi TTTe<br>eea SOeeOGee SES000 00000008 u3>———NG >Gg SEaeSSS SESE Ee<br>a A OO OO OO Pict eet ye EE EE EEEEss<br>-0.50<br>——a SO OD,oe -2.0 FEEEEEEEEEEECEE E EEEEE E EEE E E EL<br>a CG OO OG GGGGO Pi tee ety ET EE EE EEE EEE<br>pK PEER<br>-0.70 a Pititi ti tite ete et<br>Ne PEESEEEEEEEEEEEEEEEEEEEEEEEEEE<br>-4.0<br>-0.90 PNesttt — No PiePEECEEEEEEEEEEEEEEEEEEEEEE eT yey EEE EEE EEE EEE ECE<br>a A ffOO GGPrOO PEELEE C E CE CEE<br>-1.10 a OG OG -6.0 Pity TT ETE TPE ETE ET EE EE EE EE EE EEE<br>1.0 10.0 100.0 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130<br>Frequency [kHz] Temperature [°C]<br>Würth Elektronik eiSos GmbH & Co. KG CREATED CHECKED GENERAL TOLERANCE PROJECTIONMETHOD<br>EMC & Inductive Solutions KaS PSL DIN ISO 2768-1m<br>Max-Eyth-Str. 1 DESCRIPTION TECHNICAL REFERENCE<br>74638 Waldenburg<br>Germany WCAP-FTXX Film Capacitors MXXP225824K310ACPP36004<br>Tel. +49 (0) 79 42 945 - 0<br>ORDER CODE<br>www.we-online.com = —_—o-<br>eiSos@we-online.com 890334026024CS<br>SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE<br>“WWETr==O- Pitch 22.5 002.000 Valid 2018-03-01 eiCap 4/8<br>Capacitance Change [%] Capacitance Change [%]<br>**----- End of picture text -----**<br>


This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 

**==> picture [189 x 12] intentionally omitted <==**

**----- Start of picture text -----**<br>
Packaging Specification - Carton: [mm]<br>**----- End of picture text -----**<br>


**==> picture [761 x 457] intentionally omitted <==**

**----- Start of picture text -----**<br>
Paperboard N fyne ; y,yNaetttay  yeayn, Mag R c i r U sesesesasaeaircecietipecerroreriest iU is . tU esgsesasasanaes i sesesesssaseesat R iayeRaysesseses Ww ittcasasaetat) a )y) BEE ] )>a g ><br>4 S eeing ime<br>O e Ny tte LEE<br>SNie YwNya iRALCytyeihaseeeLEEees \<br>Tet lh D S . De Tee<br>SpaaaSp o t eaelh Te ataItee teetee ty, So<br>eSatayt Pltatayt Itatty ea teatatatatetataelt,<br>Hethlh PeTeeTe e ’ tetee h et h \r e tee h h 1 e e e e t Teh et h p e n eh h hyatbe s<br>eeTPTTeeth D K DS. DeteeTeeteDe h y 5teeth Teeteh TeePe tr e Teee tt e th ehees=sat<br>onlh P h ISDetetDeTeteeteeDee Te.TeePS. teteTee a t teetectteeheetr e Ste e ete h y a trtPhe eee tt h IPSy<br>pee6 Tee TeeP e h y STre TeeTeeTee t y . } t h Tee ee teet r e et ) treRaa’h ehrsIr s<br>TRSataeeRTeePeeeegTeeDeeteTeeately t he .Deeh Teetetee tatty et he e DetentTeeTre t teehteeheh a t e e ty e aehteeThsieebsethh y vhsIP s P s<br>RDeegPee TeeDeteTee ~ De at teh e nay} nat<br>Tee re te tee eIPS<br>RR Tee Pe s<br>Rs Naw Test ee<br>_ LC (mm) WC (mm) HC (mm) No. ofinner Carton PackagingUnit Material<br>LIC (mm) WIC (mm) HIC (mm) No. ofPaperboard No. ofLayer PackagingUnit Material aa typ.500,00 typ.290,00 typ.240,00 pcs.6  ( pcs.3132 ( Paper<br>typ. typ. typ. pcs. pcs. pcs.<br>275,00 160,00 95,00 4 3 522 Paper<br>Würth Elektronik eiSos GmbH & Co. KG CREATED CHECKED GENERAL TOLERANCE PROJECTIONMETHOD<br>EMC & Inductive Solutions KaS PSL DIN ISO 2768-1m<br>Max-Eyth-Str. 1 DESCRIPTION TECHNICAL REFERENCE<br>74638 Waldenburg<br>Germany WCAP-FTXX Film Capacitors MXXP225824K310ACPP36004<br>Tel. +49 (0) 79 42 945 - 0<br>ORDER CODE<br>www.we-online.comeiSos@we-online.com 890334026024CS<br>— —O—_ SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE<br>Pitch 22.5 002.000 Valid 2018-03-01 eiCap 5/8<br>L C<br>W<br>C<br>L IC<br>W<br>IC<br>IC C<br>H H<br>**----- End of picture text -----**<br>


This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 

## **Classification Wave Soldering Profile:** 

**==> picture [226 x 204] intentionally omitted <==**

**----- Start of picture text -----**<br>
t<br>p<br>T<br>p<br>First Wave Nhsy Second Wave<br>hs<br>oes<br>i\e<br>1''''‘....<br>1.<br>1 [.]<br>1‘.1.‘..<br>1.<br>1 .<br>‘ . .<br>..‘.<br>TTs maxs typical ° ° - - ° ' ‘‘ ‘.. . . . . . .<br>° - ' ‘ ‘<br>Ts min - ° °of - ° - . ’1 . . . . . . . .<br>° °rag ° °oa of . . . .<br>- - of ° ° °° Pad - . . . . .<br>- - - ° . ° ca . sS . . tS,<br>° - - Preheat area Cool down area vs<br>**----- End of picture text -----**<br>


**==> picture [11 x 58] intentionally omitted <==**

**----- Start of picture text -----**<br>
Temperature<br>**----- End of picture text -----**<br>


## **Classification Wave Soldering Profile:** 

|**Profile Feature**||**Pb-Free Assembly**|**Sn-Pb Assembly**||
|---|---|---|---|---|
|**Preheat Temperature Min**|Ts min|100 °C|100 °C||
|**Preheat Temperature Typical**|Ts typical|120 °C|120 °C||
|**Preheat Temperature Max**|Ts max|130 °C|130 °C||
|**Preheat Time ts from Ts min to Ts max**|ts|70 seconds|70 seconds||
|**Ramp-up Rate**|Δ T|150 °C max.|150 °C max.||
|**Peak temperature**|Tp|250 °C - 260 °C|235 °C - 260 °C||
|**Time of actual peak temperature**|tp|max. 10 seconds<br>max. 5 seconds each wave|max. 10 seconds<br>max. 5 seconds each wave||
|**Ramp-down Rate, Min**||~ 2 K/ second|~ 2 K/ second||
|**Ramp-down Rate, Typical**||~ 3.5 K/ second|~ 3.5 K/ second||
|**Ramp-down Rate, Max**||~ 5 K/ second|~ 5 K/ second||
|**Time 25°C to 25°C**||4 minutes|4 minutes||



refer to EN61760-1:2006 

## **Time** 

typical temperature procedure min temperature procedure max temperature procedure 

**==> picture [492 x 92] intentionally omitted <==**

**----- Start of picture text -----**<br>
Würth Elektronik eiSos GmbH & Co. KG CREATED CHECKED GENERAL TOLERANCE PROJECTIONMETHOD<br>EMC & Inductive Solutions KaS PSL DIN ISO 2768-1m<br>i<br>Max-Eyth-Str. 1 DESCRIPTION TECHNICAL REFERENCE<br>74638 Waldenburg<br>Germany WCAP-FTXX Film Capacitors MXXP225824K310ACPP36004<br>Tel. +49 (0) 79 42 945 - 0<br>ORDER CODE<br>www.we-online.comeiSos@we-online.com 890334026024CS<br>SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE<br>Pitch 22.5 002.000 Valid 2018-03-01 eiCap 6/8<br>**----- End of picture text -----**<br>


This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 

## **Cautions and Warnings:** 

## **The following conditions apply to all goods within the product series of WCAP-FTXX of Würth Elektronik eiSos GmbH & Co. KG:** 

## **5. Flammability:** 

Avoid any external energy or open fire (passive flammability). 

## **6. Vibration resistance:** 

## **1. General:** 

Do not exceed the vibration limits given by IEC60068-2-6. 

The capacitor is engineered, designed and manufactured to be used within the datasheet specified values. Do not use the capacitor neither short term nor long term outside the specified values, which are given in the data sheet. 

## **2. Product specific:** 

## **7. Cleaning:** 

Do not use any other cleaning solvents for box-typed capacitors except: ethanol, isopropanol, n-propanol - water mixtures. After cleaning a drying process with temperatures not exceeding 65°C and not longer than 4 hours is mandatory to prevent any kind of electrical damage. 

Follow all instructions mentioned in the data sheet, especially: 

## **8. Full covered or embedded capacitors in final applications:** 

- The soldering profile has to be complied with according to the technical reflow soldering specification, otherwise this will void the warranty. 

If final assemblies will be placed completely in any plastic resin, physical, chemical and thermal influences must be considered. If any specific evaluation or test is necessary please contact the related Würth Elektronik Capacitor Business Division. 

- Wave soldering is only allowed after evaluation and approval. 

- Do not exceed the lower and/ or upper specified temperature! 

- Do not use the capacitor with other than specified voltage! 

- Prevent any kind of mechanical stress to the capacitor terminals! 

- Do not use the soldered capacitor on a PCB for any movement or transportation to avoid any tensile force to the capacitor! 

- Do not apply any kind of flexural or compressive force onto soldered or unsoldered component! 

- Prevent the capacitor surface from any damage or scratches with sharp edges (e.g. chassis, screwdrivers, pincers). 

- The capacitor must be placed on a PCB while using the recommended drill hole pattern without changing of the specific lead pitch! 

- Avoid any other than specified temperature and / or time conditions during soldering! 

- Avoid any overload or conditions that are not specified in the capacitors datasheet! 

- Avoid any water or heavy dust on capacitors surface which may cause electrical leakage, damage, overheating or corrosion! 

- FTXX is not recommended to be used in ther series to mains application. 

## **3. Storage conditions:** 

These film capacitors must be stored in stable climatic conditions, which are listed within the general information on front of data sheet. 

## **4. Storage duration:** 

All products shall be used before the end of the period of 12 months based on the product date code, if not a 100% solderability can´t be ensured. 

**==> picture [492 x 92] intentionally omitted <==**

**----- Start of picture text -----**<br>
Würth Elektronik eiSos GmbH & Co. KG CREATED CHECKED GENERAL TOLERANCE PROJECTIONMETHOD<br>EMC & Inductive Solutions KaS PSL DIN ISO 2768-1m<br>Max-Eyth-Str. 1 DESCRIPTION TECHNICAL REFERENCE<br>74638 Waldenburg<br>Germany WCAP-FTXX Film Capacitors MXXP225824K310ACPP36004<br>Tel. +49 (0) 79 42 945 - 0<br>www.we-online.comeiSos@we-online.com —  — _F-— ORDER CODE 890334026024CS<br>SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE<br>“WE<br>Tr O- Pitch 22.5 002.000 Valid 2018-03-01 eiCap 7/8<br>**----- End of picture text -----**<br>


This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH 

& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 

## **Important Notes** 

## **The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:** 

## **1. General Customer Responsibility** 

Some goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not. 

## **2. Customer Responsibility related to Specific, in particular Safety-Relevant Applications** 

## **6. Product Life Cycle** 

Due to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 

## **7. Property Rights** 

All the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used. 

It has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications. In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at www.we-online.com. 

## **8. General Terms and Conditions** 

Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at www.we-online.com. 

## **3. Best Care and Attention** 

Any product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty. 

## **4. Customer Support for Product Specifications** 

Some products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter. 

## **5. Product R&D** 

Due to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected. 

|Würth Elektronik eiSos GmbH & Co. KG<br>EMC & Inductive Solutions<br>Max-Eyth-Str. 1<br>74638 Waldenburg<br>Germany<br>Tel. +49 (0) 79 42 945 - 0<br>www.we-online.com<br>eiSos@we-online.com<br>—<br>_F-—<br>—“WE<br>Tr<br>O-<br>WURTH ELEKTRONIK|CREATED<br>KaS|CREATED<br>KaS|CHECKED<br>PSL|CHECKED<br>PSL|GENERAL TOLERANCE<br>DIN ISO 2768-1m|GENERAL TOLERANCE<br>DIN ISO 2768-1m|PROJECTION<br>METHOD|PROJECTION<br>METHOD||
|---|---|---|---|---|---|---|---|---|---|
||DESCRIPTION<br>**WCAP-FTXX Film Capacitors**|||||TECHNICAL REFERENCE<br>MXXP225824K310ACPP36004||||
|||||||ORDER CODE<br>**890334026024CS**||||
||SIZE<br>Pitch 22.5|REVISION<br>002.000||STATUS<br>Valid||DATE (YYYY-MM-DD)<br>2018-03-01||BUSINESS UNIT<br>eiCap|PAGE<br>8/8|



This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.