82-015G-C

## 82 Compensated 

## SPECIFICATIONS 

- **316L SS Pressure Sensor** 

- **19mm Diameter Package** 

- **0 - 100mV Output** 

- **Absolute and Gage** 

- **Temperature Compensated** 

The 82 compensated is a 19 mm small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The 82 compensated can be configured for o-ring mounting or threaded process fittings and is designed for OEM applications where compatibility with corrosive media is required. 

The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element. A ceramic substrate is attached to the package that contains lasertrimmed resistors for temperature compensation and offset correction. An additional laser-trimmed resistor is included which can be used to adjust an external differential amplifier and provide span interchangeability to within ±1%. 

Please refer to the 82 uncompensated and constant voltage datasheets for more information on different features of the 82. 

SENSOR SOLUTIONS ///82C                                                                 2/2016 

Page 1 

82 Compensated 

## FEATURES 

- O-Ring Mount/Threaded Process Fittings 

- -40ºC to +125ºC Operating Temperature Range 

- ±0.2% Pressure Non Linearity 

- 1.0% Interchangeable Span (provided by gain set resistor) 

- Solid State Reliability 

## APPLICATIONS 

- Medical Instruments 

- Process Control 

- Fresh & Waste Water Measurements 

- Partial Vacuum Gas Measurement 

- Pressure Transmitters 

- Tank Level Systems (RV & Industrial) 

## STANDARD RANGES 

|**Range**|**psia**|**psig**|
|---|---|---|
|0 to 1|||
|0 to 5|||
|0 to 15|||
|0 to 30|||
|0 to 50|||
|0 to 100|||
|0 to 300|||
|0 to 500|||



SENSOR SOLUTIONS ///82C                                                                     2/2016 

Page 2 

82 Compensated 

## PERFORMANCE SPECIFICATIONS 

## **Supply Current: 1.5mA** 

## **Ambient Temperature: 25°C (unless otherwise specified)** 

|||**001PSI**|||**005PSI**|||**≥015PSI**||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|**PARAMETERS**||||||||||**UNITS**|**NOTES**|
||**MIN**|**TYP**|**MAX**|**MIN**|**TYP**|**MAX**|**MIN**|**TYP**|**MAX**|||
|Span|50|100|150|50|100|150|75|100|150|mV|1|
|Zero Pressure Output|-2|0|2|-2|0|2|-1|0|1|mV||
|Pressure Non Linearity|-0.3||0.3|-0.2||+0.2|-0.1||0.1|%Span|2|
|Pressure Hysteresis|-0.10|±0.02|0.10|-0.10|±0.02|0.10|-0.05|±0.02|0.05|%Span||
|Repeatability||±0.02|||±0.02|||±0.02||%Span||
|Input Resistance|2.5|5.0|6.5|2.5|5.0|6.5|3.8||5.8|KΩ||
|Output Resistance|4.0||7.0|4.0||7.0|4.0||6.0|KΩ||
|Thermal Hysteresis – Span|-0.25|±0.05|0.25|-0.25|±0.05|0.25|-0.25|±0.05|+0.25|%Span|3|
|Thermal Hysteresis – Offset|-0.25|±0.05|0.25|-0.25|±0.05|0.25|-0.25|±0.05|+0.25|%Span|3|
|Temperature Error – Span|-1.0||1.0|-1.0||1.0|-0.75||0.75|%Span|3|
|Temperature Error – Offset|-1.0||1.0|-1.0||1.0|-0.5||0.5|%Span|3, 9|
|Long Term Stability – Span||±0.10|||±0.10|||±0.10||%Span|4|
|Long Term Stability – Offset||±0.25|||±0.25|||±0.10||%Span|4|
|Supply Current|0.5|1.5|2.0|0.5|1.5|2.0|0.5|1.5|2.0|mA||
|Insulation Resistance (50Vdc)|50|||50|||50|||MΩ|5|
|Output Noise (10Hz to 1KHz)||1|||1|||1||uV p-p||
|Response Time (10% to 90%)||0.1|||0.1|||0.1||ms||
|Pressure Overload|||10x|||3x|||3x|Rated|6|
|Pressure Burst|||12x|||4x|||4x|Rated||
|Operating Temperature|-20||+70|-20||+70|-40||+125|ºC||
|Compensated Temperature|0||+50|0||+70|-20||+85|°C||
|Storage Temperature|-50||+125|-50||+125|-50||+125|ºC|7|
|Media – Pressure Port|Liquids and Gases compatible with 316L Stainless Steel and Buna-N||||||||||8|
|Media – Reference Port|Compatible with Silicon, Pyrex, Gold, Fluorosilicone|||||RTV and 316L Stainless Steel||||||



**Notes** 

1. Ratiometric to supply current. 

2. Best fit straight line. 

3. Maximum temperature error within the compensated temperature range with respect to 25°C. 

4. Long term stability over a one year period with constant current and temperature. 

5. Minimum resistance between case and pins. 

6. 10 psi maximum for 1 psi devices. 

7. Maximum temperature range for product with standard cable and connector is -20°C to +105°C. 

8. Gage units not recommended for high vacuum applications. For high vacuum applications consult factory. 9. Temperature Error – Offset for 15psi is -0.75 to 0.75 and >15psi is -0.5 to 0.5. 

SENSOR SOLUTIONS ///82C                                                                     2/2016 

Page 3 

82 Compensated 

## DIMENSIONS 

**==> picture [439 x 365] intentionally omitted <==**

## CONNECTIONS 

**==> picture [166 x 195] intentionally omitted <==**

SENSOR SOLUTIONS ///82C                                                                     2/2016 

Page 4 

82 Compensated 

## APPLICATION SCHEMATIC 

## ORDERING INFORMATION 

**==> picture [442 x 113] intentionally omitted <==**

**----- Start of picture text -----**<br>
82  -  050  G  -  1  C  T<br>Pressure  Pressure<br>Model  -  Range Type -  Fitting Type  Electrical  Vent<br>82  -  001*  G  = Gage  -  Blank  = O-Ring Mount  P  = Solder Pads  Blank  = No Tube<br>005  A  = Absolute  1  = ¼-18NPT  R  = Ribbon Cable  T  = Tube<br>015  2  = 1/8-27 NPT  C  = Cable w/ Connector<br>030  3  = 7/16-20UNF<br>050  9  = ¼-19BSP<br>100<br>300<br>500<br>**----- End of picture text -----**<br>


*1psi only available in gage type 

## **NORTH AMERICA** 

## **EUROPE** 

## **ASIA** 

Measurement Specialties, Inc., Measurement Specialties (Europe), Ltd., Measurement Specialties (China), Ltd., a TE Connectivity Company a TE Connectivity Company a TE Connectivity Company 45738 Northport Loop West 26 Rue des Dames No. 26 Langshan Road Fremont, CA 94538 78340 Les Clayes-sous-Bois, France Shenzhen High-Tech Park (North) Tel: 1-800-767-1888 Tel: +33 (0) 130 79 33 00 Nanshan District, Shenzhen 518057 Fax: 1-510-498-1578 Fax: +33 (0) 134 81 03 59 China Sales: pfg.cs.amer@meas-spec.com Sales: pfg.cs.emea@meas-spec.com Tel: +86 755 3330 5088 Fax: +86 755 3330 5099 Sales: pfg.cs.asia@meas-spec.com 

## **TE.com/sensorsolutions** 

Measurement Specialties, Inc., a TE Connectivity company. 

Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. 

The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. 

© 2015 TE Connectivity Ltd. family of companies All Rights Reserved. 

SENSOR SOLUTIONS ///82C                                                                     2/2016 

Page 5