8134897

## **Pressure sensor SPAN-P10R-G18F-PNLK-PNVBA-L1** 

Part number: 8134897 

> General operating condition ~~oo~~ 

## **Data sheet** 

|**Feature**|**Value**|
|---|---|
|Symbol|00995685|
|Certification|RCM compliance mark<br>c UL us - Listed (OL)|
|CE marking (see declaration of conformity)|As per EU EMC directive<br>As per EU RoHS directive|
|UKCA marking (see declaration of conformity)|To UK RoHS instructions|
|Certificate issuing authority|UL E322346|
|Note on materials|RoHS compliant|
|Measured variable|Relative pressure|
|Method of measurement|Piezoresistive pressure sensor|
|Pressure measuring range initial value|0 MPa|
|Pressure measuring range initial value|0 bar|
|Pressure measuring range initial value|0 psi|
|Pressure measuring range end value|1 MPa|
|Pressure measuring range end value|10 bar|
|Pressure measuring range end value|145 psi|
|Max. overload pressure|15 bar|
|Overload pressure|1.5 MPa|
|Overload pressure|15 bar|
|Overload pressure|217.5 psi|
|Operating medium|Compressed air as per ISO 8573-1:2010 [7:4:4]<br>Inert gases|
|Information on operating and pilot media|Lubricated operation possible|
|Temperature of medium|0 °C ... 50 °C|
|Ambient temperature|0 °C ... 50 °C|
|Accuracy in ± % FS|1.5 %FS|
|Repetition accuracy in ± %FS|0.3 %FS|
|Temperature co-efficient in ± %FS/K|0.05 %FS/K|
|Switching output|2 x PNP or 2 x NPN switchable|
|Switching function|Window comparator<br>Threshold value comparator<br>Auto difference monitoring|
|Switching element function|N/C contact/N/O contact, switchable|
|Max. output current|100 mA|
|Analog output|0 - 10 V<br>4 - 20 mA<br>1 - 5 V|



6/3/26 - Subject to change - Festo SE & Co. KG 

1/2 

|**Feature**|**Value**|
|---|---|
|Max. load resistance of current output|500 Ohm|
|Min. load resistance of voltage output|20 kOhm|
|Short-circuit protection|Yes|
|Protocol|IO-Link®|
|IO-Link®, protocol version|Device V 1.1|
|IO-Link®, profile|Smart sensor profile|
|IO-Link®, function classes|Binary data channel (BDC)<br>Process data variable (PDV)<br>Identification<br>Diagnostics<br>Teach channel|
|IO-Link®, communication mode|COM2 (38,4 kBd)|
|IO-Link®, SIO mode support|Yes|
|IO-Link®, port class|A|
|IO-Link®, process data width OUT|0 bytes|
|IO-Link®, process data width IN|2 Byte|
|IO-Link®, process data content IN|14 bit PDV (pressure measurement)<br>2 bit BDC (pressure monitoring)|
|IO-Link®, minimum cycle time|3 ms|
|IO-Link®, data memory required|500 byte|
|DC operating voltage range|15 V ... 30 V|
|Reverse polarity protection|for all electrical connections|
|Electrical connection 1, connection type|Plug|
|Electrical connection 1, connection technology|Connection pattern L1J|
|Electrical connection 1, number of pins/wires|4|
|Electrical connection for input 1, connection pattern|00995428|
|Type of mounting|Front panel mounting<br>With thread<br>With wall/surface bracket|
|Mounting position|Any|
|Pneumatic connection|Internal thread G1/8|
|Product weight|34 g|
|Housing material|PA-reinforced|
|Materials in contact with the media|FPM<br>high-alloy stainless steel|
|Display type|Illuminated LCD|
|Displayable unit(s)|MPa<br>bar<br>In H2O<br>In Hg<br>KPa<br>kgf/cm²<br>mbar<br>mmHg<br>psi|
|Setting options|IO-Link®<br>Teach-in<br>Via display and keys|
|Protection against tampering|IO-Link®<br>PIN code|
|Setting range threshold value|0 % ... 100 %|
|Setting range hysteresis|0 % ... 90 %|
|Degree of protection|IP40|
|Corrosion resistance class (CRC)|2 - Moderate corrosion stress|
|LABS (PWIS) conformity|VDMA24364-B1/B2-L|
|Suitability for the production of Li-ion batteries|Suitable for battery production with reduced Cu/Zn/Ni values (F1a)|
|Cleanroom suitability, measured according to ISO 14644-14|Class 4 according to ISO 14644-1|



6/3/26 - Subject to change - Festo SE & Co. KG 

2/2