Image not available
Illustrative purposes only
8117D
PATCH ANTENNA, 1.568-1.618GHZ, 3 DBI
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: PCTEL
- Product type:
- Antenna Type:Patch; Frequency Min:1.568GHz; Frequency Max:1.618GHz; Antenna Mounting:Magnetic; Gain:3dBi; VSWR:-; Input Power:-; Input Impedance:-; Antenna Polarisation:Right Hand Ci
- Gain: 3dBi
- SVHC: To Be Advised
- VSWR: -
- Input Power: -
- Antenna Type: Patch
- Frequency Max: 1.618GHz
- Frequency Min: 1.568GHz
- Product Range: -
- Input Impedance: -
- Antenna Mounting: Magnetic
- Antenna Polarisation: Right Hand Circular
| Delivery and price | |
|---|---|
| Units per pack | 50 |
| Price | 59.13 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
**GNSS ANTENNAS** **GPS/GLONASS Mobile Antennas** "a RoHSCOMPLIANT ## **8117D** ## **GPS L1/GLONASS L1 Active Magnetic Mount Antenna** The 8117D GPS L1/GLONASS antenna is a high performance antenna with a wide voltage range, ideally suited to telematics platforms for use in vehicle mounted applications. With a wideband patch, this antenna was designed to operate at GPS L1 as well as GLONASS L1 frequencies. Using internal magnets or screw mount holes, the antenna can be installed almost anywhere on a vehicle allowing for greater flexibility. The 8117D antenna features 28 dB gain low noise amplifier and a SAW filter. With 2.7 to 5 volt operation, the antenna can be used with the vast majority of GPS L1 and GLONASS systems available. ## **Features** 8117D - GPS L1 & GLONASS L1 Frequencies - Voltage range 2.5 – 5 V - LNA 28 dB gain typical • Low noise figure 1.5 dB **STANDARD CONFIGURATION** ~~Pd~~ **Model Cable Connector Mount** Magnetic (5 lb lift-off force) or permanent 8117D 9.8’ (3 meters) highly flexible 174 sized cable Male SMA standard ~~a~~ (pre-threaded for 3 x M2.5 screws) **ELECTRICAL SPECIFICATIONS - GNSS ANTENNA** ~~PO~~ **Frequency Range LNA Gain Element Gain Polarization** @ 3.3 VDC: 28 dB ± 1.5 dB (typical) 3 dBic @ 90° 1568-1618 MHz (typical) Right hand circular ~~++~~ @ 5 VDC: 30 dB ± 1.5 dB (typical) -2 dBic @ 20° **ELECTRICAL SPECIFICATIONS - GNSS ANTENNA, continued** ~~Co~~ |**Current Draw**<br>~~Co~~|**Out of Band Rejection**|**DC Voltage**|**Noise Figure**| |---|---|---|---| |<20mA @ 3.3v<br><35mA @ 5.0v|@ 1535 MHz: > 45 dB<br>@ 1540 MHz: > 30 dB<br>@ 1545 MHz: > 20 dB<br>@ 1670 MHz: > 40 dB<br>@ 1650 MHz: > 30 dB<br>@ 1640 MHz: > 20 dB|2.5-5 VDC (operating)*|1.5 dB (typical)| **MECHANICAL & ENVIRONMENTAL SPECIFICATIONS** PT **Dimensions Weight Housing Material Temperature Range Ingress Protection** 2.05” L x 2.33” W x 0.54” H 0.26 lbs (120 g) ASA -40°C to +85°C operating IP67** ~~+++~~ (52.1 x 59.2 x 13.6 mm) * User may see a degradation of 2 dB gain between 2.5-2.7 VDC from advertised specification. ** When installed according to the manufacturer’s installation instructions. PCTEL, Inc. WEB: www.antenna.com
Updated at June 9, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →