784773068

|**Dimensions: [mm]**<br>Solder Resist<br>4,5 ref.<br>1,5 ref.<br>5,0 ref.<br>No vias and traces in restricted area<br>1,75 ref.<br>Scale - 5:1<br>**Schematic:**|**Electrical Properties:**<br>**Properties**<br>**Test conditions**<br>**Value**<br>**Unit**<br>**Tol.**<br>**Inductance**<br>L<br>10 kHz/ 100 mV<br>6.8<br>µH<br>±20%<br>**Rated Current**<br>IR<br>ΔT = 40 K<br>1.54<br>A<br>max.<br>**Saturation Current**<br>ISAT<br>|ΔL/L| < 10 %<br>2.1<br>A<br>typ.<br>**DC Resistance**<br>RDC<br>@ 20 °C<br>0.076<br>Ω<br>typ.<br>**DC Resistance**<br>RDC<br>@ 20 °C<br>0.131<br>Ω<br>max.<br>**Self Resonant Frequency**<br>fres<br>@ 20 °C<br>35<br>MHz<br>typ.<br>**Rated Voltage**<br>VR<br>@ 20 °C<br>80<br>V (DC)<br>max.<br>**Certification:**<br>**RoHS Approval**<br>Compliant [2011/65/EU&2015/863]<br>**REACh Approval**<br>Conform or declared [(EC)1907/2006]<br>**Halogen Free**<br>Conform [JEDEC JS709B]<br>**Halogen Free**<br>Conform [IEC 61249-2-21]<br>**Component Qualification**<br>AEC-Q200 Grade 0<br>**Automotive Approval**<br>Released<br>~~es~~<br>~~a~~|**Electrical Properties:**<br>**Properties**<br>**Test conditions**<br>**Value**<br>**Unit**<br>**Tol.**<br>**Inductance**<br>L<br>10 kHz/ 100 mV<br>6.8<br>µH<br>±20%<br>**Rated Current**<br>IR<br>ΔT = 40 K<br>1.54<br>A<br>max.<br>**Saturation Current**<br>ISAT<br>|ΔL/L| < 10 %<br>2.1<br>A<br>typ.<br>**DC Resistance**<br>RDC<br>@ 20 °C<br>0.076<br>Ω<br>typ.<br>**DC Resistance**<br>RDC<br>@ 20 °C<br>0.131<br>Ω<br>max.<br>**Self Resonant Frequency**<br>fres<br>@ 20 °C<br>35<br>MHz<br>typ.<br>**Rated Voltage**<br>VR<br>@ 20 °C<br>80<br>V (DC)<br>max.<br>**Certification:**<br>**RoHS Approval**<br>Compliant [2011/65/EU&2015/863]<br>**REACh Approval**<br>Conform or declared [(EC)1907/2006]<br>**Halogen Free**<br>Conform [JEDEC JS709B]<br>**Halogen Free**<br>Conform [IEC 61249-2-21]<br>**Component Qualification**<br>AEC-Q200 Grade 0<br>**Automotive Approval**<br>Released<br>~~es~~<br>~~a~~|**Electrical Properties:**<br>**Properties**<br>**Test conditions**<br>**Value**<br>**Unit**<br>**Tol.**<br>**Inductance**<br>L<br>10 kHz/ 100 mV<br>6.8<br>µH<br>±20%<br>**Rated Current**<br>IR<br>ΔT = 40 K<br>1.54<br>A<br>max.<br>**Saturation Current**<br>ISAT<br>|ΔL/L| < 10 %<br>2.1<br>A<br>typ.<br>**DC Resistance**<br>RDC<br>@ 20 °C<br>0.076<br>Ω<br>typ.<br>**DC Resistance**<br>RDC<br>@ 20 °C<br>0.131<br>Ω<br>max.<br>**Self Resonant Frequency**<br>fres<br>@ 20 °C<br>35<br>MHz<br>typ.<br>**Rated Voltage**<br>VR<br>@ 20 °C<br>80<br>V (DC)<br>max.<br>**Certification:**<br>**RoHS Approval**<br>Compliant [2011/65/EU&2015/863]<br>**REACh Approval**<br>Conform or declared [(EC)1907/2006]<br>**Halogen Free**<br>Conform [JEDEC JS709B]<br>**Halogen Free**<br>Conform [IEC 61249-2-21]<br>**Component Qualification**<br>AEC-Q200 Grade 0<br>**Automotive Approval**<br>Released<br>~~es~~<br>~~a~~|**Electrical Properties:**<br>**Properties**<br>**Test conditions**<br>**Value**<br>**Unit**<br>**Tol.**<br>**Inductance**<br>L<br>10 kHz/ 100 mV<br>6.8<br>µH<br>±20%<br>**Rated Current**<br>IR<br>ΔT = 40 K<br>1.54<br>A<br>max.<br>**Saturation Current**<br>ISAT<br>|ΔL/L| < 10 %<br>2.1<br>A<br>typ.<br>**DC Resistance**<br>RDC<br>@ 20 °C<br>0.076<br>Ω<br>typ.<br>**DC Resistance**<br>RDC<br>@ 20 °C<br>0.131<br>Ω<br>max.<br>**Self Resonant Frequency**<br>fres<br>@ 20 °C<br>35<br>MHz<br>typ.<br>**Rated Voltage**<br>VR<br>@ 20 °C<br>80<br>V (DC)<br>max.<br>**Certification:**<br>**RoHS Approval**<br>Compliant [2011/65/EU&2015/863]<br>**REACh Approval**<br>Conform or declared [(EC)1907/2006]<br>**Halogen Free**<br>Conform [JEDEC JS709B]<br>**Halogen Free**<br>Conform [IEC 61249-2-21]<br>**Component Qualification**<br>AEC-Q200 Grade 0<br>**Automotive Approval**<br>Released<br>~~es~~<br>~~a~~|**Electrical Properties:**<br>**Properties**<br>**Test conditions**<br>**Value**<br>**Unit**<br>**Tol.**<br>**Inductance**<br>L<br>10 kHz/ 100 mV<br>6.8<br>µH<br>±20%<br>**Rated Current**<br>IR<br>ΔT = 40 K<br>1.54<br>A<br>max.<br>**Saturation Current**<br>ISAT<br>|ΔL/L| < 10 %<br>2.1<br>A<br>typ.<br>**DC Resistance**<br>RDC<br>@ 20 °C<br>0.076<br>Ω<br>typ.<br>**DC Resistance**<br>RDC<br>@ 20 °C<br>0.131<br>Ω<br>max.<br>**Self Resonant Frequency**<br>fres<br>@ 20 °C<br>35<br>MHz<br>typ.<br>**Rated Voltage**<br>VR<br>@ 20 °C<br>80<br>V (DC)<br>max.<br>**Certification:**<br>**RoHS Approval**<br>Compliant [2011/65/EU&2015/863]<br>**REACh Approval**<br>Conform or declared [(EC)1907/2006]<br>**Halogen Free**<br>Conform [JEDEC JS709B]<br>**Halogen Free**<br>Conform [IEC 61249-2-21]<br>**Component Qualification**<br>AEC-Q200 Grade 0<br>**Automotive Approval**<br>Released<br>~~es~~<br>~~a~~|**Electrical Properties:**<br>**Properties**<br>**Test conditions**<br>**Value**<br>**Unit**<br>**Tol.**<br>**Inductance**<br>L<br>10 kHz/ 100 mV<br>6.8<br>µH<br>±20%<br>**Rated Current**<br>IR<br>ΔT = 40 K<br>1.54<br>A<br>max.<br>**Saturation Current**<br>ISAT<br>|ΔL/L| < 10 %<br>2.1<br>A<br>typ.<br>**DC Resistance**<br>RDC<br>@ 20 °C<br>0.076<br>Ω<br>typ.<br>**DC Resistance**<br>RDC<br>@ 20 °C<br>0.131<br>Ω<br>max.<br>**Self Resonant Frequency**<br>fres<br>@ 20 °C<br>35<br>MHz<br>typ.<br>**Rated Voltage**<br>VR<br>@ 20 °C<br>80<br>V (DC)<br>max.<br>**Certification:**<br>**RoHS Approval**<br>Compliant [2011/65/EU&2015/863]<br>**REACh Approval**<br>Conform or declared [(EC)1907/2006]<br>**Halogen Free**<br>Conform [JEDEC JS709B]<br>**Halogen Free**<br>Conform [IEC 61249-2-21]<br>**Component Qualification**<br>AEC-Q200 Grade 0<br>**Automotive Approval**<br>Released<br>~~es~~<br>~~a~~|**Electrical Properties:**<br>**Properties**<br>**Test conditions**<br>**Value**<br>**Unit**<br>**Tol.**<br>**Inductance**<br>L<br>10 kHz/ 100 mV<br>6.8<br>µH<br>±20%<br>**Rated Current**<br>IR<br>ΔT = 40 K<br>1.54<br>A<br>max.<br>**Saturation Current**<br>ISAT<br>|ΔL/L| < 10 %<br>2.1<br>A<br>typ.<br>**DC Resistance**<br>RDC<br>@ 20 °C<br>0.076<br>Ω<br>typ.<br>**DC Resistance**<br>RDC<br>@ 20 °C<br>0.131<br>Ω<br>max.<br>**Self Resonant Frequency**<br>fres<br>@ 20 °C<br>35<br>MHz<br>typ.<br>**Rated Voltage**<br>VR<br>@ 20 °C<br>80<br>V (DC)<br>max.<br>**Certification:**<br>**RoHS Approval**<br>Compliant [2011/65/EU&2015/863]<br>**REACh Approval**<br>Conform or declared [(EC)1907/2006]<br>**Halogen Free**<br>Conform [JEDEC JS709B]<br>**Halogen Free**<br>Conform [IEC 61249-2-21]<br>**Component Qualification**<br>AEC-Q200 Grade 0<br>**Automotive Approval**<br>Released<br>~~es~~<br>~~a~~|**Electrical Properties:**<br>**Properties**<br>**Test conditions**<br>**Value**<br>**Unit**<br>**Tol.**<br>**Inductance**<br>L<br>10 kHz/ 100 mV<br>6.8<br>µH<br>±20%<br>**Rated Current**<br>IR<br>ΔT = 40 K<br>1.54<br>A<br>max.<br>**Saturation Current**<br>ISAT<br>|ΔL/L| < 10 %<br>2.1<br>A<br>typ.<br>**DC Resistance**<br>RDC<br>@ 20 °C<br>0.076<br>Ω<br>typ.<br>**DC Resistance**<br>RDC<br>@ 20 °C<br>0.131<br>Ω<br>max.<br>**Self Resonant Frequency**<br>fres<br>@ 20 °C<br>35<br>MHz<br>typ.<br>**Rated Voltage**<br>VR<br>@ 20 °C<br>80<br>V (DC)<br>max.<br>**Certification:**<br>**RoHS Approval**<br>Compliant [2011/65/EU&2015/863]<br>**REACh Approval**<br>Conform or declared [(EC)1907/2006]<br>**Halogen Free**<br>Conform [JEDEC JS709B]<br>**Halogen Free**<br>Conform [IEC 61249-2-21]<br>**Component Qualification**<br>AEC-Q200 Grade 0<br>**Automotive Approval**<br>Released<br>~~es~~<br>~~a~~|
|---|---|---|---|---|---|---|---|---|
|**Schematic:**<br>—~~SVN~~|||||||||
||**General Properties:**<br>It is recommended that the temperature of the component does not exceed +150°C under worst<br>case conditions<br>**Ambient Temperature**<br>-50 °C up to +110 °C<br>**Operating Temperature**<br>-50 °C up to +150 °C<br>**Storage Conditions (in original**<br>**packaging)**<br><  40 °C ; <  75 %  RH<br>**Moisture Sensitivity Level (MSL)**<br>1<br>Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently<br>Coplanarity of the terminal pads: 120 µm||||||||
|||CHECKED<br>PaC|REVISION<br>003.000|DATE (YYYY-MM-DD)<br>2024-03-12|GENERAL TOLERANCE<br>DIN ISO 2768-1m||PROJECTION<br>METHOD||
|||DESCRIPTION<br>**WE-PD2A SMT Power Inductor**|||||||
|Würth Elektronik eiSos GmbH & Co. KG<br>EMC & Inductive Solutions<br>Max-Eyth-Str. 1<br>74638 Waldenburg<br>Germany<br>Tel. +49 (0) 79 42 945 - 0<br>www.we-online.com<br>eiSos@we-online.com|||||||||
|||||||ORDER CODE<br>**784773068**|||
|||SIZE/TYPE<br>4532|||BUSINESS UNIT<br>eiSos|STATUS<br>Valid||PAGE<br>1/8|



**==> picture [287 x 120] intentionally omitted <==**

**----- Start of picture text -----**<br>
3<br>— ae<br>Scale - 5:1<br>Start of Winding •<br>Marking 6R8 (Inductance Code)<br> 0,3<br>u<br>4,0<br>**----- End of picture text -----**<br>


This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 

**Typical Temperature Rise vs. Current Characteristics:** 

## **Typical Inductance vs. Current Characteristics:** 

**==> picture [786 x 477] intentionally omitted <==**

**----- Start of picture text -----**<br>
8 100<br>90<br>7<br>80<br>SO<br>6<br>Oe | eeee<br>70<br>5<br>60<br>4 50<br>40<br>3<br>30<br>2<br>20<br>1<br>10<br>0 0<br>0 0.5 1 1.5 2 2.5 3 0 0.5 1 1.5 2 2.5<br>Current [A] Current [A]<br>CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION<br>METHOD<br>PaC 003.000 2024-03-12 DIN ISO 2768-1m<br>DESCRIPTION<br>WE-PD2A SMT Power Inductor<br>com = cpu “Are” SBS Würth Elektronik eiSos GmbH & Co. KG pd<br>EMC & Inductive Solutions ORDER CODE<br>Max-Eyth-Str. 174638 Waldenburg 784773068<br>Germany<br>Tel. +49 (0) 79 42 945 - 0 SIZE/TYPE BUSINESS UNIT STATUS PAGE<br>www.we-online.com<br>eiSos@we-online.com 4532 eiSos Valid 2/8<br>Temperature Rise [K]<br>Inductance [µH]<br>**----- End of picture text -----**<br>


This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 

## **Typical Impedance Characteristics:** 

**==> picture [317 x 292] intentionally omitted <==**

**----- Start of picture text -----**<br>
10000<br>SSee |<br>ee 2<br>a a De ee<br>a a<br>ee A.<br>LI ECT ELE<br>1000<br>fo oT TPT TT ge<br>a a 2 0 A<br>ee) eee,<br>TCL<br>100 CCETTT<br>a CS BS OS OS SS SS SO ” A GO SO GS GS SG OO<br>ee <i<br>fT oT TTT ET<br>fT oT TTTa<br>eeee<br>HATH<br>10 CCEACT<br>a NSO_O OG GO SO GS GS SO OO<br>eeee<br>[TT Tg<br>a Oe” A 0 0 OO<br>|_| [tty tT TTT TY<br>AIOE<br>7A<br>1<br>0.01 0.1 1 10 100<br>Impedance [Ω]<br>**----- End of picture text -----**<br>


## **Frequency [MHz]** 

||CHECKED|REVISION||DATE (YYYY-MM-DD)||GENERAL TOLERANCE||PROJECTION||
|---|---|---|---|---|---|---|---|---|---|
|||||||||METHOD||
||PaC|003.000||2024-03-12||DIN ISO 2768-1m||||
||DESCRIPTION|||||||||
||**WE-PD2A SMT Power Inductor**|||**WE-PD2A SMT Power Inductor**|**WE-PD2A SMT Power Inductor**|||||
|Würth Elektronik eiSos GmbH & Co. KG||||||||||
|EMC & Inductive Solutions|||||||ORDER CODE|||
|Max-Eyth-Str. 1<br>74638 Waldenburg<br>Germany<br>Tel. +49 (0) 79 42 945 - 0|SIZE/TYPE|||||BUSINESS UNIT|**784773068**<br>STATUS||PAGE|
|www.we-online.com<br>eiSos@we-online.com|4532|||||eiSos|Valid||3/8|



This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 

## **Packaging Specification - Tape: [mm]** 

## **Packaging Specification - Reel: [mm]** 

**==> picture [785 x 491] intentionally omitted <==**

**----- Start of picture text -----**<br>
P0 K0<br>A D0 P2 T W3<br>| i || 7 r<br>W1<br>close to center<br>B<br>C<br>Top Cover<br>    Tape<br>A D1 P1 T1 W2<br>A0 T2<br>End Feeding direction Start Carrier Tape detail B<br>Cover Tape<br>PO S SSC O SCO S OO Y H ST H SC S C S OS C S C SO S SS O S S HOS \ H H SC H SH H H S O" T B Cover Tape a<br>Chip Cavity<br>( \ ¢ .\ ¢ C E N ev FY ( \ SI G j :  3 ~ Sprocket Hole<br>oy ue M E D CE CB cy ey ue K A SK<br>= = — = C F<br>No Component ST Components No Component Ww VA\ o<br>min. 160mm min. 100mm<br>Embossment<br>Cover Tape<br>min. 400mm<br>Packaging is referred to the international standard  Tape Type A0(mm) B0(mm) W(mm) IEC 60286-3:2019T(mm) T1(mm) T2(mm) K0(mm) P0(mm) P1(mm) P2(mm) D0(mm) D1(mm) E1(mm) E2(mm) F(mm) Material Qty.(pcs.) Tolerance A(mm) B min. (mm) C ±0,8 (mm) D min. (mm) N min. (mm) W1 +1,5 (mm) W2 max. (mm) W3 min. (mm) W3 max. (mm) Material<br>a Tolerance typ. typ. +0,3/ -0,1 ±0,1 max. typ. typ. ±0,1 ±0,1 ±0,05 +0,3/ -0,1 min. ±0,1 min. ±0,05 Sea Value 330,00 1,50 13,00 20,20 100,00 16,40 22,40 15,90 19,40 Polystyrene<br>ss Value 2a 4,50 ss 5,50 QQ 16,00 0,25 0,10 4,00 3,55 4,00 8,00 2,00 1,50 1,50 1,75 CO 14,25 (a 7,50 Polystyrene 1500<br>CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION<br>METHOD<br>PaC 003.000 2024-03-12 DIN ISO 2768-1m<br>DESCRIPTION<br>WE-PD2A SMT Power Inductor<br>Würth Elektronik eiSos GmbH & Co. KG<br>EMC & Inductive Solutions ORDER CODE<br>Max-Eyth-Str. 174638 Waldenburg 784773068<br>Germany<br>[ Pull-off force MORE THAN Tel. +49 (0) 79 42 945 - 0www.we-online.com SIZE/TYPE BUSINESS UNIT STATUS PAGE<br>Tape width 16 mm 0,1 N - 1,3 N eiSos@we-online.com 4532 eiSos Valid 4/8<br>165° - 180°<br>E1<br>F D<br>B0 E2 W A N<br>**----- End of picture text -----**<br>


This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 

## **Classification Reflow Profile for SMT components:** 

**==> picture [341 x 198] intentionally omitted <==**

**----- Start of picture text -----**<br>
T<br>p TC –5°C<br>t<br>Max. Ramp Up Rate p<br>Max. Ramp Down Rate<br>TL<br>tL<br>Ts max Preheat Area<br>Ts min<br>tS<br>pet |<br>25<br>Time 25°C to Peak<br>Temperature<br>**----- End of picture text -----**<br>


**Time** 

## **Classification Reflow Soldering Profile:** 

|**Profile Feature**||**Value**|
|---|---|---|
|**Preheat Temperature Min**|Ts min|150 °C|
|**Preheat Temperature Max**|Ts max|200 °C|
|**Preheat Time ts from Ts min to Ts max**<br>**Ramp-up Rate (TL to TP)**|ts|60 - 120 seconds<br>3 °C/ second max.|
|**Liquidous Temperature**|TL|217 °C|
|**Time tL maintained above TL**<br>**Peak package body temperature**<br>**Time within 5°C of actual peak**<br>**temperature**<br>**Ramp-down Rate (TP to TL)**<br>**Time 25°C to peak temperature**|tL<br>Tp<br>tp|60 - 150 seconds<br>Tp≤ Tc, see Table below<br>20 - 30 seconds<br>6 °C/ second max.<br>8 minutes max.|



refer to IPC/ JEDEC J-STD-020E 

## **Package Classification Reflow Temperature (Tc):** 

|**Properties**|**Volume mm³**<br>**<350**|**Volume mm³**<br>**350-2000**|**Volume mm³**<br>**>2000**||
|---|---|---|---|---|
|**PB-Free Assembly | Package Thickness**<br>**< 1.6 mm**|260 °C|260 °C|260 °C||
|**PB-Free Assembly | Package Thickness**<br>**1.6 mm - 2.5 mm**|260 °C|250 °C|245 °C||
|**PB-Free Assembly | Package Thickness**<br>**> 2.5 mm**|250 °C|245 °C|245 °C||
|**Sn-PB Assembly | Package Thickness < 2.5**<br>**mm**|235 °C|220 °C|||
|**Sn-PB Assembly | Package Thickness ≥ 2.5**<br>**mm**|220 °C|220 °C|||



||CHECKED|REVISION||DATE (YYYY-MM-DD)||GENERAL TOLERANCE||PROJECTION||
|---|---|---|---|---|---|---|---|---|---|
|||||||||METHOD||
||PaC|003.000||2024-03-12||DIN ISO 2768-1m||||
|Würth Elektronik eiSos GmbH & Co. KG|DESCRIPTION<br>**WE-PD2A SMT Power Inductor**|||**WE-PD2A SMT Power Inductor**|**WE-PD2A SMT Power Inductor**||~~pd~~|~~pd~~|~~pd~~|
|EMC & Inductive Solutions|||||||ORDER CODE|||
|Max-Eyth-Str. 1<br>74638 Waldenburg<br>Germany<br>Tel. +49 (0) 79 42 945 - 0|SIZE/TYPE|||||BUSINESS UNIT|**784773068**<br>STATUS||PAGE|
|www.we-online.com<br>eiSos@we-online.com|4532|||||eiSos|Valid||5/8|



This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 

## **Further information** 

**Component Libraries:** Altium_WE-PD2A (22c) Downloads_CADENCE_WE-PD2A (19a) Cadstar_WE-PD2A (19a) Eagle_WE-PD2A (19a) Download_IGS_WE-PD2A_4532_PD2A PSpice_WE-PD2A (22a) Download_STP_WE-PD2A-4532 Spectre_WE-PD2A (23a) 

**Free Sample Order:** Order free samples of this article directly here! **REDEXPERT:** Calculate losses for 784773068 in REDEXPERT 

**==> picture [371 x 94] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||
|---|---|---|---|---|
|CHECKED|REVISION|DATE (YYYY-MM-DD)|GENERAL TOLERANCE|PROJECTION|
|METHOD|
|PaC|003.000|2024-03-12|DIN ISO 2768-1m|
|DESCRIPTION|
|WE-PD2A SMT Power Inductor|
|Würth Elektronik eiSos GmbH & Co. KG|pd|
|EMC & Inductive Solutions|ORDER CODE|
|Max-Eyth-Str. 174638 Waldenburg|784773068|
|Germany|
|Tel. +49 (0) 79 42 945 - 0|SIZE/TYPE|BUSINESS UNIT|STATUS|PAGE|
|www.we-online.com|
|eiSos@we-online.com|4532|eiSos|Valid|6/8|

**----- End of picture text -----**<br>


This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 

## **Cautions and Warnings:** 

## **The following conditions apply to all goods within the product series of WE-PD2A of Würth Elektronik eiSos GmbH & Co. KG:** 

## **General:** 

All recommendations according to the general technical specifications of the data sheet have to be complied with. 

The usage and operation of the product within ambient conditions, which probably alloy or harm the wire isolation, has to be avoided. 

If the product is potted in costumer applications, the potting material might shrink during and after hardening. The product is exposed to the pressure of the potting material with the effect that the core, wire and termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endangered to be affected. After the potting material is cured, the core, wire and termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred. 

The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply to customer specific products. 

Washing varnish agent that is used during the production to clean the customer application might damage or change the characteristics of the wire insulation, the marking or the plating. The washing varnish agent could have a negative effect on the long term function of the product. 

Direct mechanical impact to the product shall be prevented as the ferrite material of the core could flake or in the worst case it could break. 

## **Product specific:** 

Follow all instructions mentioned in the data sheet, especially: 

- The soldering profile has to be complied with according to the technical reflow soldering specification, otherwise this will void the warranty. 

- All products shall be used before the end of the period of 12 months based on the product date code, if not a 100% solderability can´t be ensured. 

- Violation of the technical product specifications such as exceeding the nominal rated current will void the warranty. 

- Solvents may influence the product marking. 

The general and product specific cautions comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable; however, no responsibility is assumed for inaccuracies or incompleteness. 

|3<br>cite — comnor |MeerN<br>$80<br>~~0G~~|CHECKED<br>PaC<br>~~PE],~~|REVISION<br>003.000<br>~~PE],~~|DATE (YYYY-MM-DD)<br>2024-03-12<br>~~PE],TT~~|GENERAL TOLERANCE<br>DIN ISO 2768-1m<br>~~TT~~<br>~~pd~~|GENERAL TOLERANCE<br>DIN ISO 2768-1m<br>~~TT~~<br>~~pd~~|PROJECTION<br>METHOD<br>~~TTee~~<br>~~pd~~|PROJECTION<br>METHOD<br>~~TTee~~<br>~~pd~~|
|---|---|---|---|---|---|---|---|
||DESCRIPTION<br>**WE-PD2A SMT Power Inductor**<br>~~PE], TT~~||||~~TT ee~~<br>~~pd~~|||
|Würth Elektronik eiSos GmbH & Co. KG<br>EMC & Inductive Solutions<br>Max-Eyth-Str. 1<br>74638 Waldenburg<br>Germany<br>Tel. +49 (0) 79 42 945 - 0<br>www.we-online.com<br>eiSos@we-online.com<br>~~0G~~<br>ELEKTRONIK<br>MORE THAN||||||||
||||||ORDER CODE<br>**784773068**<br>~~pd~~|||
||SIZE/TYPE<br>4532|||BUSINESS UNIT<br>eiSos|STATUS<br>Valid||PAGE<br>7/8|



This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 

## **Important Notes** 

## **The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:** 

## **1. General Customer Responsibility** 

Some goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not. 

## **2. Customer Responsibility related to Specific, in particular Safety-Relevant Applications** 

## **6. Product Life Cycle** 

Due to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 

## **7. Property Rights** 

All the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used. 

It has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications. In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at www.we-online.com. 

## **8. General Terms and Conditions** 

Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at www.we-online.com. 

## **3. Best Care and Attention** 

Any product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty. 

## **4. Customer Support for Product Specifications** 

Some products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter. 

## **5. Product R&D** 

Due to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected. 

|3<br>cite — comnor |MeerN<br>$80<br>~~0G~~|CHECKED<br>PaC<br>~~PE],~~|REVISION<br>003.000<br>~~PE],~~|DATE (YYYY-MM-DD)<br>2024-03-12<br>~~PE],TT~~|GENERAL TOLERANCE<br>DIN ISO 2768-1m<br>~~TT~~<br>~~pd~~|GENERAL TOLERANCE<br>DIN ISO 2768-1m<br>~~TT~~<br>~~pd~~|PROJECTION<br>METHOD<br>~~TTee~~<br>~~pd~~|PROJECTION<br>METHOD<br>~~TTee~~<br>~~pd~~|
|---|---|---|---|---|---|---|---|
||DESCRIPTION<br>**WE-PD2A SMT Power Inductor**<br>~~PE], TT~~||||~~TT ee~~<br>~~pd~~|||
|Würth Elektronik eiSos GmbH & Co. KG<br>EMC & Inductive Solutions<br>Max-Eyth-Str. 1<br>74638 Waldenburg<br>Germany<br>Tel. +49 (0) 79 42 945 - 0<br>www.we-online.com<br>eiSos@we-online.com<br>~~0G~~<br>ELEKTRONIK<br>MORE THAN||||||||
||||||ORDER CODE<br>**784773068**<br>~~pd~~|||
||SIZE/TYPE<br>4532|||BUSINESS UNIT<br>eiSos|STATUS<br>Valid||PAGE<br>8/8|



This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.