Image not available
Illustrative purposes only
7638900411560.
Battery, 3 V, 1225, Lithium Poly Carbon Monofluoride, 48 mAh, Pressure Contact, 1
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: ENERGIZER
- Product type: Batteries - Non-Rechargeable
- Weight: 0.8g
- Pack Quantity: 1
- Product Range: -
- Battery Voltage: 3V
- External Height: 2.5mm
- Battery Capacity: 48mAh
- Battery IEC Code: BR1225
- Battery NEDA Code: -
- Battery Size Code: 1225
- Battery Terminals: Pressure Contact
- External Diameter: 12.5mm
- Battery Technology: Lithium Poly Carbon Monofluoride
| Delivery and price | |
|---|---|
| Units per pack | 50 |
| Price | 2.73 € |
| Current stock | 10+ |
| Lead time | 30 days |
## PRODUCT DATASHEET a ## ENERGIZER NO. BR1225 ## LITHIUM COIN ## **Specifications** ## **Industry Standard Dimensions** (mm) **==> picture [181 x 91] intentionally omitted <==** **----- Start of picture text -----**<br> 2.50 12.50<br>2.20 12.20<br>4.00<br>Min<br>i] _ - i<br>a e od<br>iia /<br>0.20 Maximum Ref.<br>Permissible defelection from a flat.<br>**----- End of picture text -----**<br> 0.03 Minimum Ref. (applies to top edge of gasket or edge of crimp, whichever is higher) **Classification: Chemical System: Designation: Nominal Voltage: Typical Capacity:** "Lithium Coin" Lithium / Poly-Carbon Monoflouride (Li/CFx) IEC-BR1225 3.0 Volts 48 mAh (to 2.0 volts) (Rated at 30K ohms at 21°C) **Typical Weight:** 0.8 grams **Typical Volume:** 0.3 cubic centimeters **Max Rev Charge:** 1 microampere **Energy Density:** 174 milliwatt hr/g, 432 milliwatt hr/cc **Operating Temp:** -30C to 80C **Self Discharge:** ~1% / year ## **Safety:** **(1) KEEP OUT OF REACH OF CHILDREN.** Swallowing may lead to serious injury or death in as little as 2 hours due to chemical burns and potential perforation of the esophagus. **Immediately see doctor; have doctor phone (800) 498-8666.** **(2) Battery compartment design** . To prevent children from removing batteries, battery compartments should be designed with one of the following methods: a) a tool such as screwdriver or coin is required to open battery compartment or b) the battery compartment door/cover requires the application of a minimum of two independent and simultaneous movements of the securing mechanism to open by hand. Screws should remain captive with the battery door or cover. ## **Typical Discharge Characteristics** ## **Cross Section** **==> picture [226 x 152] intentionally omitted <==** **----- Start of picture text -----**<br> Load: 30K ohms - Continuous<br>Typical Drain @ 2.7V: 0.09 mA<br>3.0<br>2.8<br>2.6<br>2.4<br>2.2<br>2.0<br>1.8<br>0 100 200 300 400 500 600<br>Service, Hours<br>Voltage, CCV<br>**----- End of picture text -----**<br> ## **Simulated Application test** Typical Performance at 21°C (70°F) |**Schedule:**|**Typical Drains:**|**Load**|**Cutoff**| |---|---|---|---| ||at 2.7V||2.0V| ||(mA)|(ohms)|(hours)| |Continuous|0.09|30,000|575| ## **Important Notice** This datasheet contains typical information specific to products manufactured at the time of its publication. **Contents herein do not constitute a warranty and are for reference only.** Page 1 of 1 Form No. BR1225GL0919
Updated at April 27, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →