Image not available
Illustrative purposes only
7638900411515.
Battery, 3 V, 1025, Lithium Manganese Dioxide, 30 mAh, Pressure Contact, 1
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: ENERGIZER
- Product type: Batteries - Non-Rechargeable
- Weight: 0.7g
- Pack Quantity: 1
- Product Range: -
- Battery Voltage: 3V
- External Height: 2.5mm
- Battery Capacity: 30mAh
- Battery IEC Code: CR1025
- Battery NEDA Code: 5033LC
- Battery Size Code: 1025
- Battery Terminals: Pressure Contact
- External Diameter: 10mm
- Battery Technology: Lithium Manganese Dioxide
| Delivery and price | |
|---|---|
| Units per pack | 100 |
| Price | 1.74 € |
| Current stock | 10+ |
| Lead time | 30 days |
## PRODUCT DATASHEET a ## ENERGIZER CR1025 ## Lithium Coin ## **Specifications** ## **Industry Standard Dimensions** mm (inches) **==> picture [211 x 135] intentionally omitted <==** **----- Start of picture text -----**<br> 10.00 (0.394)<br>9.70 (0.382)<br>3.00 (0.118) 2.50 (0.098)<br>Minimum 2.20 (0.087)<br>Poo<br>i<br>(4<br>)|<br>\ t /<br>0.30 (0.012) Maximum Ref.<br>Permissible deflection from a flat.<br>0.03 (0.001) Minimum Ref.<br>(Applies to top edge of gasket or<br>edge of crimp, whichever is higher.)<br>**----- End of picture text -----**<br> **Classification: Chemical System: Designation: Nominal Voltage: Typical Capacity:** "Lithium Coin" Lithium / Manganese Dioxide (Li/MnO2) ANSI-5033LC, IEC-CR1025 3.0 Volts 30 mAh (to 2.0 volts) (Rated at 68K ohms at 21°C) 0.7 grams (0.02 oz.) 0.2 cubic centimeters (0.01 cubic inch) 1 microampere 124 milliwatt hr/g, 435 milliwatt hr/cc 0.009 grams (0.0003 oz.) -30C to 60C ~1% / year **Typical Weight: Typical Volume: Max Rev Charge: Energy Density: Typical Li Content: Operating Temp: Self Discharge:** ## **Safety** : **(1) KEEP OUT OF REACH OF CHILDREN.** Swallowing may lead to serious injury or death in as little as 2 hours due to chemical burns and potential perforation of the esophagus. **Immediately see doctor; have doctor phone (800) 498-8666.** **(2) Battery compartment design** . To prevent children from removing batteries, battery compartments should be designed with one of the following methods: a) a tool such as screwdriver or coin is required to open battery compartment or b) the battery compartment door/cover requires the application of a minimum of two independent and simultaneous movements of the securing mechanism to open by hand. Screws should remain captive with the battery door or cover. ## **Typical Discharge Characteristics** ## **Cross Section** **==> picture [231 x 153] intentionally omitted <==** **----- Start of picture text -----**<br> Load: 68K ohms - Continuous<br>Typical Drain @ 2.9V: 0.043 mA<br>3.2<br>3.0<br>2.8 eeeesLCL<br>2.6<br>2.4<br>2.2<br>2.0<br>1.8<br>0 200 400 600 800<br>Service, Hours<br>Voltage, CCV<br>**----- End of picture text -----**<br> ## **Simulated Application test** Typical Performance at 21°C (70°F) |**Schedule:**|**Typical Drains:**|**Load**|**Cutoff**| |---|---|---|---| ||at 2.9V||2.0V| ||(mA)|(ohms)|(hours)| |Continuous|0.043|68,000|721| ## **Important Notice** This datasheet contains typical information specific to products manufactured at the time of its publication. **Contents herein do not constitute a warranty and are for reference only.** Page 1 of 1 Form No.1025NA0618
Updated at April 27, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →