Image not available
Illustrative purposes only
7638900393194
Battery, 1.5 V, LR43, Alkaline, 113 mAh, Pressure Contact, 2
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: ENERGIZER
- Product type: Batteries - Non-Rechargeable
- Available until stocks are exhausted
- SVHC: No SVHC (14-Jun-2023)
- Weight: 1.5g
- Pack Quantity: 2
- Product Range: 186 Series
- Battery Voltage: 1.5V
- External Height: 4.2mm
- Battery Capacity: 113mAh
- Battery IEC Code: LR1142
- Battery NEDA Code: -
- Battery Size Code: 0
- Battery Terminals: Pressure Contact
- External Diameter: 11.6mm
- Battery Compliance: -
- Battery Technology: Alkaline
- Battery Type / Size: Button Cell
| Delivery and price | |
|---|---|
| Units per pack | 100 |
| Price | 1.39 € |
| Current stock | 10+ |
| Lead time | 30 days |
## PRODUCT DATASHEET a nergizer. 1-800-383-7323 / USA1-800-383-7323 USA/CAN 1-800-383-7323 / CANADAwww.energizer.com , ## ENERGIZER 186 ## **Miniature Alkaline** ## **Specifications** ## **Chemical System:** Manganese Dioxide (MnO2) ## **Industry Standard Dimensions** mm (inches) **Designation: Nominal Voltage: Typical Capacity:** **Typical Weight: Typical Volume:** IEC-LR43 1.5 Volts 123 mAh (to 0.9 volts) Rated at 15K ohms / 21°C (70°F) 1.5 grams (0.05 ounces) 0.40 cubic centimeters (0.05 cubic inch) **==> picture [187 x 130] intentionally omitted <==** **----- Start of picture text -----**<br> 3.80 (0.150)<br>11.60 (0.457) Minimum<br>11.30 (0.445) 4.20 (0.165)<br>3.80 (0.150)<br>R1.5 (0.059) Ref.<br>3.55 (0.140)<br>in<br>± 1.5 (0.059 Ref.)<br>0.25 (0.010) Maximum Ref.<br>Permissible deflection from a flat<br>0.13 (0.005) Minimum Ref.<br>(applies to top edge of gasket or<br>edge of crimp, whicever is higher)<br>**----- End of picture text -----**<br> **==> picture [165 x 142] intentionally omitted <==** **----- Start of picture text -----**<br> Cross Section<br>Anode Cap<br>o S<br>Anode Gel<br>Gasket<br>Cathode Can<br>Separator<br>> 2 s Cathode<br>**----- End of picture text -----**<br> Designed for electronic applications which may require high rate pulses ## **Typical Discharge Characteristics** 21°C (70°F) **Load: 15K ohms -** Continuous **Typical Drain @ 1.25V:** 0.125 mA **==> picture [224 x 129] intentionally omitted <==** **----- Start of picture text -----**<br> 1.6<br>ee<br>1.5 ee<br>1.4<br>eee<br>1.3<br>1.2 ee ee ee<br>1.1 i<br>1.0<br>0.9<br>0 300 600 900 1200 1500<br>Service, Hours<br>Voltage, CCV<br>**----- End of picture text -----**<br> ## **Depth of Discharge Test** Percent of rated Capacity at 21°C (70°F) Typical closed circuit voltage during discharge on a load of 100 ohms for 0.1 to 2.0 seconds **% Rated Capacity 0% 40% 80%** 1.52V 1.19V 1.07V ## **Bulge Data** This battery will bulge as it is discharged but will not exceed the maximum height shown on the battery drawing. **Schedule: Typical Drains: Load Cutoff** at 1.25V 0.9V (milliamperes) (ohms) (hours) Continuous 0.083 15,000 1,476 ## **Important Notice** This data sheet contains typical information specific to products manufactured at the time of its publication. **©Energizer Holdings, Inc. - Contents herein do not constitute a warranty.** Form No. EBC - 4401H Page 1 of 1
Updated at April 27, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →