Image not available
Illustrative purposes only
715P22352JD3
Power Film Capacitor, Film / Foil PP, Radial, 0.022 µF, ± 5%, Snubber, Through Hole
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: CORNELL DUBILIER
- Product type: Power Film Capacitors
- Capacitance:22000pF; Voltage Rating:200V; Capacitor Dielectric Type:PP (Polypropylene); Capacitance Tolerance:± 5%; Product Range:715P Series; Capacitor C; Available until stocks are exhausted
- ESR: -
- SVHC: No SVHC (23-Jan-2024)
- Capacitance: 0.022µF
- Voltage(AC): 155V
- Voltage(DC): 200V
- Lead Spacing: 9.525mm
- Peak Current: -
- dv/dt Rating: 820V/µs
- Output (kvar): -
- Product Range: Orange Drop 715P Series
- Product Width: -
- Qualification: -
- Product Height: -
- Product Length: 17.8mm
- Ripple Current: -
- Dielectric Type: Film / Foil PP
- Humidity Rating: -
- Product Diameter: -
- Capacitor Mounting: Through Hole
- RMS Current (Irms): -
- Capacitor Terminals: PC Pin
- Typical Applications: Snubber
- Capacitance Tolerance: ± 5%
- Capacitor Case / Package: Radial
- Operating Temperature Max: 85°C
- Operating Temperature Min: -55°C
| Delivery and price | |
|---|---|
| Units per pack | 100 |
| Price | 1.12 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
|
|---|
Updated at April 3, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 800+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →