6ES7307-1EA01-0AA0

**6ES7307-1EA01-0AA0** 

**Data sheet** 

SIMATIC PS307/1AC/24VDC/5A 

SIMATIC S7-300 Regulated power supply PS307 input: 120/230 V AC, output: 24 V/5 A DC 

|= =<br>(<br>4<br>rl|SIMATIC PS307/1AC/24VDC/5A<br>SIMATIC S7-300 Regulated power supply PS307 input: 120/230 V AC, output: 24<br>V/5 A DC|
|---|---|
|**General information**||
|Technical Product Detail Page|https://i.siemens.com/1P6ES7307-1EA01-0AA0|
|**input**||
|type of thepower supplynetwork|1-phase AC|
|supplyvoltage at AC|Automatic range selection|
|supplyvoltage|120 V/230 V|
|input voltage 1 at AC|85 ... 132 V|
|input voltage 2 at AC|170 ... 264 V|
|wide range input|No|
|overvoltage overload capability|2.3 × Vin rated, 1.3 ms|
|buffering time for rated value of the output current in the event of<br>power failure minimum|20 ms|
|operatingcondition of the mains buffering|at Vin = 93/187 V|
|line frequency|50/60 Hz|
|line frequency|47 ... 63 Hz|
|input current||
|● at rated input voltage 120 V|2.3 A|
|● at rated input voltage 230 V|1.2 A|
|current limitation of inrush current at 25 °C maximum|20 A|
|duration of inrush current limitingat 25 °C||
|● maximum|3 ms|
|I2t value maximum|1.2 A²·s|
|fuseprotection type|T 3,15 A/250 V(not accessible)|
|fuse protection type in the feeder|Recommended miniature circuit breaker: from 6 A characteristic C|
|**output**||
|voltage curve at output|Controlled, isolated DC voltage|
|output voltage at DC rated value|24 V|
|output voltage||
|● at output 1 at DC rated value|24 V|
|output voltage adjustable|No; -|
|relative overall tolerance of the voltage|3 %|
|relative controlprecision of the output voltage||
|● on slow fluctuation of input voltage|0.1 %|
|● on slow fluctuation of ohm loading|0.5 %|
|residual ripple||
|● maximum|50 mV|
|● typical|10 mV|
|voltagepeak||
|● maximum|150 mV|



6ES73071EA010AA0 Page 1/5 

Subject to change without notice © Copyright Siemens 

5/17/2026 

|● typical|20 mV|
|---|---|
|displayversion for normal operation|Green LED for 24 V OK|
|behavior of the output voltage when switchingon|No overshoot of Vout(soft start)|
|response delaymaximum|2 s|
|voltage increase time of the output voltage||
|● typical|10 ms|
|output current||
|● rated value|5 A|
|● rated range|0 ... 5 A|
|supplied activepower typical|120 W|
|short-term overload current||
|● on short-circuitingduringthe start-uptypical|20 A|
|● at short-circuit duringoperation typical|20 A|
|duration of overloadingcapabilityfor excess current||
|● on short-circuitingduringthe start-up|100 ms|
|● at short-circuit duringoperation|100 ms|
|bridgingof equipment|Yes|
|**efficiency**||
|efficiencyinpercent|87 %|
|power loss[W]||
|● at rated output voltage for rated value of the output<br>current typical|18 W|
|**closed-loop control**||
|relative control precision of the output voltage with rapid<br>fluctuation of the input voltage by+/- 15% typical|0.1 %|
|relative control precision of the output voltage load step of<br>resistive load 50/100/50 % typical|1 %|
|settingtime||
|● load step50 to 100% typical|0.3 ms|
|● load step 100 to 50% typical|0.3 ms|
|**protection and monitoring**||
|design of the overvoltageprotection|Additional control loop, shutdown at < 28.8 V, automatic restart|
|propertyof the output short-circuitproof|Yes|
|design of short-circuitprotection|Electronic shutdown, automatic restart|
|response value current limitation|5.5 ... 6.5 A|
|enduringshort circuit current RMS value||
|● maximum|7 A|
|**safety**||
|galvanic isolation between input and output|Yes|
|galvanic isolation|Output voltage: SELV, ES1(IEC 62368-1), DVC As(IEC 61204-7)|
|operatingresourceprotection class|Class I|
|leakage current||
|● maximum|3.5 mA|
|● typical|0.5 mA|
|protection class IP|IP20|
|**EMC**||
|standard||
|● for emitted interference|EN 55022 Class B|
|● for mains harmonics limitation|EN 61000-3-2|
|● for interference immunity|EN 61000-6-2|
|**standards, specifications, approvals**||
|certificate of suitability||
|● CE marking|Yes|
|● UL approval|Yes; cULus-Listed(UL 508, CSA C22.2 No. 142), File E143289|
|● UKCA marking|Yes|
|● EAC approval|Yes|
|● NEC Class 2|No|
|type of certification||
|● BIS|Yes; R-41183539|



6ES73071EA010AA0 Page 2/5 

Subject to change without notice © Copyright Siemens 

5/17/2026 

|● CB-certificate|Yes|
|---|---|
|MTBF at 40 °C|2 480 589 h|
|**standards, specifications, approvals hazardous environments**||
|certificate of suitability||
|● IECEx|Yes; IECEx Ex nA nC IIC T3 Gc|
|● ATEX|Yes; ATEX(EX)II 3G Ex nA nC IIC T3 Gc|
|● ULhazloc approval|Yes|
|● UKEX|Yes|
|● CCC for hazardous zone accordingto GB standard|Yes|
|● FM registration|Yes; Class I, Div. 2, Group ABCD, T4|
|**standards, specifications, approvals marine classification**||
|shipbuildingapproval|Yes|
|Marine classification association||
|● American Bureau of ShippingEurope Ltd.(ABS)|No|
|● French marine classification society (BV)|No|
|● Det Norske Veritas(DNV)|Yes|
|● Lloyds Register of Shipping (LRS)|Yes|
|**standards, specifications, approvals Environmental Product Declaration**||
|Environmental Product Declaration|Yes|
|global warming potential[CO2 eq]||
|● total|504.1 kg|
|● duringmanufacturing|11.3 kg|
|● duringoperation|492.3 kg|
|● after end of life|0.41 kg|
|**ambient conditions**||
|ambient temperature||
|● duringoperation|0 ... 60 °C; with natural convection|
|● duringtransport|-40 ... +85 °C|
|● duringstorage|-40 ... +85 °C|
|environmental categoryaccordingto IEC 60721|Climate class 3K3, 5 ... 95% no condensation|
|**connection method**||
|type of electrical connection|screw terminal|
|● at input|L, N, PE: 1 screw terminal each for 0.5 ... 2.5 mm² single-core/finelystranded|
|● at output|L+, M: 3 screw terminals each for 0.5 ... 2.5 mm²|
|● for auxiliarycontacts|-|
|**mechanical data**||
|width × height × depth of the enclosure|60 × 125 × 120 mm|
|installation width × mountingheight|60 mm × 205 mm|
|required spacing||
|● top|40 mm|
|● bottom|40 mm|
|● left|0 mm|
|● right|0 mm|
|fasteningmethod|Can be mounted onto S7 rail|
|● DIN-rail mounting|No|
|● S7 rail mounting|Yes|
|● wall mounting|No|
|housingcan be lined up|Yes|
|net weight|0.6 kg|
|**accessories**||
|mechanical accessories|Mountingadapter for standard mountingrail(6EP1971-1BA00)|
|**further information internet links**||
|internet link||
|● to website: IndustryMall|https://mall.industry.siemens.com|
|● to webpage: selection aid TIA Selection Tool|https://www.siemens.com/tstcloud|
|● to website: CAx-Download-Manager|https://siemens.com/cax|
|● to website: IndustryOnline Support|https://support.industry.siemens.com|
|**additional information**||



6ES73071EA010AA0 Page 3/5 

Subject to change without notice © Copyright Siemens 

5/17/2026 

**==> picture [510 x 214] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||
|---|---|
|other information|Specifications at rated input voltage and ambient temperature +25 °C (unless|
|otherwise specified)|
|rr|security information|
|security information|Siemens provides products and solutions with industrial cybersecurity functions|
|that support the secure operation of plants, systems, machines and networks.|
|In order to protect plants, systems, machines and networks against cyber|
|threats, it is necessary to implement - and continuously maintain - a holistic,|
|state-of-the-art industrial cybersecurity concept. Siemens’ products and|
|solutions constitute one element of such a concept. Customers are responsible|
|for preventing unauthorized access to their plants, systems, machines and|
|networks. Such systems, machines and components should only be connected|
|to an enterprise network or the internet if and to the extent such a connection is|
|necessary and only when appropriate security measures (e.g. firewalls and/or|
|network segmentation) are in place. For additional information on industrial|
|cybersecurity measures that may be implemented, please visit|
|www.siemens.com/cybersecurity-industry. Siemens’ products and solutions|
|undergo continuous development to make them more secure. Siemens strongly|
|recommends that product updates are applied as soon as they are available|
|and that the latest product versions are used. Use of product versions that are|
|no longer supported, and failure to apply the latest updates may increase|
|customer’s exposure to cyber threats. To stay informed about product updates,|
|subscribe to the Siemens Industrial Cybersecurity RSS Feed under|
|https://www.siemens.com/cert. (V4.7)|

**----- End of picture text -----**<br>


**Classifications** 

**==> picture [511 x 344] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||
|---|---|---|---|---|---|
|Version|Classification|
|eClass|14|27-04-07-01|
|eClass|12|27-04-07-01|
|eClass|9.1|27-04-07-01|
|eClass|9|27-04-07-01|
|eClass|8|27-04-90-02|
|eClass|7.1|27-04-90-02|
|eClass|6|27-04-90-02|
|ETIM|10|EC002540|
|ETIM|9|EC002540|
|ETIM|8|EC002540|
|ETIM|7|EC002540|
|IDEA|4|4130|
|UNSPSC|15|39-12-10-04|
|Approvals Certificates|
|en|Environmental Product Declaration|
|● global warming potential [CO2 eq] / during manufacturing|11.3 kg|
|● global warming potential [CO2 eq] / during operation|492.3 kg|
|● global warming potential [CO2 eq] / after end of life|0.41 kg|
|● global warming potential [CO2 eq] / total|504.1 kg|
|Environment|General Product Approval|
|Manufacturer Declara-|Declaration of Con-|China RoHS|
|tion|formity|
|EPD|cB|ce|7|_|i|

**----- End of picture text -----**<br>


**General Product Approval** 

**For use in hazardEMV ous locations** 

~~—~~ BIS CRS 

**For use in hazardous locations** 

6ES73071EA010AA0 Page 4/5 

Subject to change without notice © Copyright Siemens 

5/17/2026 

**==> picture [494 x 269] intentionally omitted <==**

**----- Start of picture text -----**<br>
Miscellaneous — ® ~~ FM CCC-Ex @<br>IECEx ATEX UL<br>For use in hazard-<br>ous locations Maritime application<br>-<br>NK / Nippon Kaiji Ky<br>okai<br>IECEx ABS Oni LAS<br>Maritime application<br>-<br>CCS (China Classifica<br>tion Society)<br>; ¢—<br>PRS FINA<br>last modified: 5/5/2026 G<br>**----- End of picture text -----**<br>


6ES73071EA010AA0 Page 5/5 

Subject to change without notice © Copyright Siemens 

5/17/2026