6ES7155-5AA00-0AC0

**6ES7155-5AA00-0AC0** 

**Data sheet** 

*** spare part *** SIMATIC ET 200MP. PROFINET IO device interface module IM 155-5 PN HF, for ET 200MP electronic modules; up to 12 IO modules without PS; up to 30 IO modules with additional PS; integrated 2-port switch; RJ45 shared device; MRP; IRT >=0.25 ms; isochronous mode firmware update; I&M0...3; prioritized startup, S2 redundancy; shared device with 4 controllers suitable for operation with the active backplane bus (FW V4.4 or higher) 

|*** spare part *** SIMATIC ET 200MP. PROFINET IO device interface module IM<br>155-5 PN HF, for ET 200MP electronic modules; up to 12 IO modules without PS;<br>up to 30 IO modules with additional PS; integrated 2-port switch; RJ45 shared<br>device; MRP; IRT >=0.25 ms; isochronous mode firmware update; I&M0...3;<br>prioritized startup, S2 redundancy; shared device with 4 controllers suitable for<br>operation with the active backplane bus (FW V4.4 or higher)<br>**General information**<br>Product type designation<br>IM 155-5 PN HF<br>HW functional status<br>From FS03<br>Firmware version<br>V4.4<br>● FW updatepossible<br>Yes<br>Vendor identification(VendorID)<br>002AH<br>Device identifier(DeviceID)<br>0X0312<br>Product function<br>● I&M data<br>Yes; I&M0 to I&M3<br>● Module swappingduringoperation(hot swapping)<br>Yes; In combination with active backplane bus<br>● Isochronous mode<br>Yes<br>● IRT<br>Yes<br>● Tool changer<br>No<br>● Local coupling, IO data<br>No<br>Engineeringwith<br>● STEP 7 TIA Portal configurable/integrated from version<br>V16<br>● STEP 7 configurable/integrated from version<br>use GSD file<br>● PROFINET from GSD version/GSD revision<br>GSDML V2.3<br>**Configuration control**<br>via dataset<br>Yes<br>**Supply voltage**<br>Rated value(DC)<br>24 V<br>permissible range, lower limit(DC)<br>19.2 V<br>permissible range, upper limit(DC)<br>28.8 V<br>Reversepolarity protection<br>Yes<br>Short-circuitprotection<br>Yes<br>Mains buffering<br>● Mains/voltage failure stored energytime<br>5 ms<br>**Input current**<br>Current consumption(rated value)<br>0.2 A; at 24 V DC and without load<br>Current consumption, max.<br>1.2 A<br>Inrush current, max.<br>9 A<br>I²t<br>0.09 A²·s<br>**Power**<br>Infeedpower to the backplane bus<br>14 W<br>Power consumption from the backplane bus<br>2.3 W; in case of operation with separate system power supplyto the left of IM<br>**Power loss**<br>Power loss, typ.<br>4.5 W<br>**Address area**<br>~~a~~<br>~~a~~<br>~~a~~<br>~~ee~~<br>~~EE~~<br>~~eO@“~~<br>~~ee~~<br>~~a~~<br>~~eea~~<br>~~a~~<br>~~ee~~|*** spare part *** SIMATIC ET 200MP. PROFINET IO device interface module IM<br>155-5 PN HF, for ET 200MP electronic modules; up to 12 IO modules without PS;<br>up to 30 IO modules with additional PS; integrated 2-port switch; RJ45 shared<br>device; MRP; IRT >=0.25 ms; isochronous mode firmware update; I&M0...3;<br>prioritized startup, S2 redundancy; shared device with 4 controllers suitable for<br>operation with the active backplane bus (FW V4.4 or higher)|~~ee~~|
|---|---|---|



|Address spaceper module|Address spaceper module|
|---|---|
|● Address spaceper module, max.|256 byte; For input and output data respectively|
|Address spaceper station||
|● Address space per station, max.|512 byte; For input and output data respectively|
|**Hardware configuration**||
|Integratedpower supply|Yes; 14 W|
|Systempower supplycan beplugged in to left of IM|Yes; onlywith design with U-connectors|
|Number ofpermissiblepower segments|3; incl. interface module|
|Rack||
|● Modulesper rack, max.|30; I/O modules|
|Submodules||
|● Number of submodules per station, max.|256; 9 per I/O module|
|**Interfaces**||
|Transmissionprocedure|100BASE-TX|
|Number of PROFINET interfaces|1; 2 ports(switch)|
|**1. Interface**||
|Interface types||
|● RJ 45(Ethernet)|Yes|
|● Number ofports|2|
|● integrated switch|Yes|
|● BusAdapter(PROFINET)|No|
|Protocols||
|● PROFINET IO Device|Yes|
|● Open IE communication|Yes|
|● Media redundancy|Yes; PROFINET MRP client / HRP client|
|PROFINET IO Device||
|Services||
|— IRT|Yes; 250µs to 4 ms in 125µs frame|
|— Dynamic Frame Packing (DFP)|No|
|— PROFIenergy|No|
|— Prioritized startup|Yes|
|— Shared device|Yes|
|— Number of IO Controllers with shared device, max.|4|
|**Interface types**||
|RJ 45(Ethernet)||
|● Transmissionprocedure|PROFINET with 100 Mbit/s full duplex(100BASE-TX)|
|● 100 Mbps|Yes|
|● Autonegotiation|Yes|
|● Autocrossing|Yes|
|**Protocols**||
|Supportsprotocol for PROFINET IO|Yes|
|PROFIsafe|Yes|
|PROFIBUS|No|
|EtherNet/IP|No|
|Modbus TCP|No|
|Redundancymode||
|● PROFINET system redundancy (S2)|Yes; NAP S2|
|— on S7-1500R/H|Yes|
|— on S7-400H|Yes; use GSD file|
|● PROFINET system redundancy (R1)|No|
|● H-Sync forwarding|Yes|
|Media redundancy||
|— MRP|Yes|
|— MRPD|Yes|
|Open IE communication||
|● TCP/IP|Yes|
|● SNMP|Yes|
|● LLDP|Yes|



6ES71555AA000AC0 Page 2/4 

Subject to change without notice © Copyright Siemens 

5/21/2026 

|**Isochronous mode**||||
|---|---|---|---|
|Equidistance|Yes|||
|shortest clockpulse|250µs|||
|max. cycle|4 ms|||
|Bus cycle time(TDP), min.|250µs|||
|Jitter, max.|1 µs|||
|**Interrupts/diagnostics/status information**||||
|Status indicator|Yes|||
|Alarms|Yes|||
|Diagnostics function|Yes|||
|Diagnostics indication LED||||
|● RUN LED|Yes;green LED|||
|● ERROR LED|Yes; red LED|||
|● MAINT LED|Yes; Yellow LED|||
|● Connection displayLINK TX/RX|Yes; 2xgreen-yellow LEDs|||
|**Potential separation**||||
|between backplane bus and electronics|No|||
|between PROFINET and all other circuits|Yes; 1500 V AC(type test)|||
|between supplyand all other circuits|No|||
|**Permissible potential difference**||||
|between different circuits|Safetyextra low voltage SELV|||
|**Isolation**||||
|Isolation tested with|707 V DC(type test)|||
|**Standards, approvals, certificates**||||
|Network loadingclass|3|||
|**Security**||||
|PROFINET SecurityClass|0|||
|**Ambient conditions**||||
|Ambient temperature duringoperation||||
|● horizontal installation, min.|-25 °C; from FS04|||
|● horizontal installation, max.|60 °C|||
|● vertical installation, min.|-25 °C; from FS04|||
|● vertical installation, max.|40 °C|||
|Altitude duringoperation relatingto sea level||||
|● Installation altitude above sea level, max.|5 000 m; Restrictions for installation altitudes > 2 000 m, see manual|||
|Absolute humidity||||
|● dew point, min.|-60 °C; suitable for dryroom applications|||
|**Connection method**||||
|ET-Connection||||
|● via BU/BA Send|No|||
|**Dimensions**||||
|Width|35 mm|||
|Height|147 mm|||
|Depth|129 mm|||
|**Weights**||||
|Weight, approx.|350g|||
|**Classifications**||||
|||**Version**|**Classification**|
||eClass<br>eClass<br>eClass<br>eClass<br>eClass<br>eClass<br>eClass<br>ETIM|14<br>12<br>9.1<br>9<br>8<br>7.1<br>6<br>10|27-24-26-08<br>27-24-26-08<br>27-24-26-08<br>27-24-26-08<br>27-24-26-08<br>27-24-26-08<br>27-24-26-08<br>EC001604|



6ES71555AA000AC0 Page 3/4 

Subject to change without notice © Copyright Siemens 

5/21/2026 

ETIM 9 EC001604 ETIM 8 EC001604 ETIM 7 EC001604 IDEA 4 3564 UNSPSC 15 32-15-17-05 ~~ee~~ **Approvals / Certificates General Product Approval EMV** EAL ~~—~~ Confirmation c egK @ **other Environment** Confirmation Environmental ConEnvironmental Con- ~~— Oo~~ firmations firmations " QC PASS EPD **last modified:** 5/20/2026 

6ES71555AA000AC0 Page 4/4 

Subject to change without notice © Copyright Siemens 

5/21/2026