6ES7152-1AA00-0AB0

**6ES7152-1AA00-0AB0** 

**Data sheet** 

SIMATIC interface module IM152-1DP for ET200iSP, PROFIBUS connection standard, and redundant operation, Ex ib IIC T4 Gb, Ex ib I Mb 

||SIMATIC interface module IM152-1DP for ET200iSP, PROFIBUS connection<br>standard, and redundant operation, Ex ib IIC T4 Gb, Ex ib I Mb|
|---|---|
|**General information**<br>~~|~~<br>~~a~~||
|Product type designation<br>~~|~~<br>~~a~~|IM 152-1<br>~~|~~<br>~~a~~|
|Vendor identification(VendorID)<br>~~a~~|8110H<br>~~a~~|
|Product function||
|● Isochronous mode|No|
|**Installation type/mounting**<br>~~|~~||
|Rack mounting<br>~~|~~|No<br>~~|~~|
|Front mounting<br>~~Oc~~|Yes|
|Rail mounting<br>~~Oc~~|Yes|
|Wall mounting/direct mounting<br>~~Oc~~|Yes|
|**Supply voltage**||
|Type of supplyvoltage|DC|
|permissible range, lower limit(DC)<br>~~Oe~~|20.4 V<br>~~Oe~~|
|permissible range, upper limit(DC)<br>~~Oe~~|28.8 V<br>~~Oe~~|
|**Input current**||
|from load voltage(power bus), max.|30 mA|
|**Power loss**<br>~~|~~||
|Power loss, typ.<br>~~|~~|0.5 W<br>~~|~~|
|**Hardware configuration**<br>~~|~~||
|Fieldbus connection via separate transceiver<br>~~|~~|No<br>~~|~~|
|**Time stamp**<br>~~|~~||
|Description<br>~~|~~|for each digital input, digital input module, entire ET 200iSP<br>~~|~~|
|Accuracy|20 ms|
|Number of stampable digital inputs, max.|64; for accuracyclass 20 ms|
|Time format|RFC 1119 Internet(ISP)|
|Time resolution|1 ms|
|Time interval for transmitting the message buffer if a message is<br>present<br>~~ee~~|1 000 ms<br>~~ee~~|
|Time stamp on signal change<br>~~ee~~|rising/ fallingedge as signal enteringor exiting<br>~~ee~~|
|**IO-Link**||
|IO-Link master|No|
|**Interfaces**<br>~~|~~||
|Interfaces/bus type<br>~~|~~|RS 485<br>~~|~~|
|Transmission rate, max.|1.5 Mbit/s; 9,6 / 19,2 / 45,45 / 93,75 / 187,5 / 500 kbit/s; 1,5 Mbit/s|
|**Protocols**<br>~~|~~||
|Supportsprotocol for PROFINET IO<br>~~|~~|No<br>~~|~~|
|PROFIsafe|No|
|PROFIBUS|Yes|
|PROFIBUS DP|Yes|



6ES71521AA000AB0 Page 1/4 

Subject to change without notice © Copyright Siemens 

5/18/2026 

|EtherNet/IP|No|
|---|---|
|PROFIBUS DP||
|Services||
|— SYNC capability|Yes|
|— FREEZE capability|Yes|
|— Direct data exchange (slave-to-slave<br>communication)|Yes|
|Furtherprotocols||
|● CAN|No|
|● DeviceNet|No|
|● Foundation Fieldbus|No|
|● MODBUS|No|
|● other bus systems|No|
|**Communication functions**||
|Wireless communication||
|● supported standards||
|— Radio standard WLAN 802.11|No|
|**Interrupts/diagnostics/status information**||
|Alarms|Yes|
|Diagnostics function|Yes|
|Alarms||
|● acyclic function, interrupts|Yes|
|● acyclic function,parameters|Yes|
|Diagnostics indication LED||
|● Bus fault BF(red)|Yes|
|● Grouperror SF(red)|Yes|
|● Monitoring24 V voltage supplyON(green)|Yes|
|**Ex(i) characteristics**||
|maximum values for connectingterminals forgasgroupIIC||
|● Uo(no-load voltage), max.|3.9 V|
|● Io(short-circuit current), max.|136 mA|
|● Po(power output), max.|132 mW|
|● Ui(intrinsicallysafe input voltage), max.|4.2 V|
|**Potential separation**||
|between electronic block and PROFIBUS DP|Yes|
|between supplyvoltage and electronics|Yes|
|**Degree and class of protection**||
|IP degree of protection|IP30|
|**Standards, approvals, certificates**||
|CE mark|CE 0344|
|UKCA mark|DEKRA 21UKEX0029 Importer UK: Siemensplc Manchester M20 2UR|
|cULus|LISTED E334384|
|FM approval|CLASSIFIED 3025852|
|Suitable for safetyfunctions|No|
|INMETRO certificate|UL-BR 12.0067|
|reference designation accordingto IEC 81346-2(2009)|K|
|Use in hazardous areas||
|● ATEX marking|II 2 G Ex ib IIC T4 Gb I M2 Ex ib I Mb|
|● ATEX certificate|KEMA 04 ATEX 1243|
|● IECEx|IECEx KEM 05.0005|
|● CCC Ex|2020322316002940|
|● EAC Ex|1Ex ib IIC T4 Gb PB Ex ib I Mb|
|● FM marking|Class I, Zone 1 AEx ib IIC T4 Ex ib IIC T4 NI, Class I, Division 2, GP. A,B,C,D<br>T4 DIP, Class II, III, GP. E,F,G|
|● Explosionprotection categoryforgas|ATEXgas explosionprotection, Zone 1|
|● Explosionprotection categoryfor dust|No|
|● associated equipment(Ex ia)|No|
|● associated equipment(Ex ib)|Yes|
|Marine approval||



6ES71521AA000AB0 Page 2/4 

Subject to change without notice © Copyright Siemens 

5/18/2026 

|● Germanischer Lloyd(GL)|● Germanischer Lloyd(GL)|● Germanischer Lloyd(GL)|||||Yes|||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|● American Bureau of Shipping (ABS)|||||||Yes|||||
|● Bureau Veritas(BV)|||||||Yes|||||
|● Det Norske Veritas(DNV)|||||||Yes|||||
|**Dimensions**<br>~~ee~~||||||||||||
|Width|||||||30 mm|||||
|Height|||||||129 mm|||||
|Depth|||||||136.5 mm|||||
|**Weights**<br>~~ee~~||||||||||||
|Weight, approx.|||||||245g|||||
|**Classifications**<br>~~ee~~||||||||||||
|||||||||||**Version**|**Classification**|
|||||||||eClass||14|27-24-26-08|
|||||||||eClass||12|27-24-26-08|
|||||||||eClass||9.1|27-24-26-08|
|||||||||eClass||9|27-24-26-08|
|||||||||eClass||8|27-24-26-08|
|||||||||eClass||7.1|27-24-26-08|
|||||||||eClass||6|27-24-26-08|
|||||||||ETIM||10|EC001604|
|||||||||ETIM||9|EC001604|
|||||||||ETIM||8|EC001604|
|||||||||ETIM||7|EC001604|
|||||||||IDEA||4|3564|
|||||||||UNSPSC||15|32-15-17-05|
|**Approvals / Certificates**<br>~~ee~~||||||||||||
|**General Product Approval**||||||||||||
|ce<br>EG-Konf,||gc<br>Ca||Miscellaneous||||CC||do<br>RCM|China RoHS|
|**General Product Ap-**<br>**proval**|**For use in hazardous locations**|**For use in hazardous locations**|**For use in hazardous locations**|**For use in hazardous locations**||||||||
|Manufacturer Declara-<br>tion<br>~~=~~~||&)||||||FM<br>-|||Miscellaneous<br>~~a~~|
||||ATEX||IECEx|||||IECEx||
|**For use in hazardous locations**|**For use in hazardous locations**|||||||||**Maritime application**||
|tee||CCC-Ex<br>~~_~~||a<br>INE<br>INMETRO||||Miscellaneous<br>~~ee~~||6<br>ALS|Fa<br>6|
|**Maritime application**||||||||||**Environment**||
|oe||BE <br>us||NK / Nippon Kaiji Ky-<br>okai<br> ~~——~~||||\||e<br>EPD||
|**last modified:**|||||||6/1/2025|G||||



6ES71521AA000AB0 Page 3/4 

Subject to change without notice © Copyright Siemens 

5/18/2026 

6ES71521AA000AB0 Page 4/4 

Subject to change without notice © Copyright Siemens 

5/18/2026