6EP7133-6AB00-0BN0

**6EP7133-6AB00-0BN0** 

**Data sheet** 

SIMATIC ET 200SP PS/1AC/24VDC/5A 

SIMATIC ET 200SP PS 24V/5A Stabilized power supply Input: 120/230 V AC Output: 24 V DC/5 A 

||SIMATIC ET 200SP PS/1AC/24VDC/5A<br>SIMATIC ET 200SP PS 24V/5A Stabilized power supply Input: 120/230 V AC<br>Output: 24 V DC/5 A|
|---|---|
|**General information**||
|Technical Product Detail Page<br>~~|~~|https://i.siemens.com/1P6EP7133-6AB00-0BN0<br>~~|~~|
|**input**<br>~~|~~||
|type of thepower supplynetwork<br>~~|~~|1-phase AC<br>~~|~~|
|supplyvoltage at AC|Automatic range selection|
|supplyvoltage|120 V/230 V|
|input voltage 1 at AC|85 ... 132 V|
|input voltage 2 at AC|170 ... 264 V|
|wide range input|No|
|overvoltage overload capability|2.3 × Vin rated, 1.3 ms|
|buffering time for rated value of the output current in the event of<br>power failure minimum|20 ms|
|operatingcondition of the mains buffering|at Vin = 93/187 V|
|line frequency|50/60 Hz|
|line frequency|47 ... 63 Hz|
|input current||
|● at rated input voltage 120 V|2.16 A|
|● at rated input voltage 230 V|1.22 A|
|current limitation of inrush current at 25 °C maximum|45 A|
|I2t value maximum|3.15 A²·s|
|fuseprotection type|T 3,15 A/250 V(not accessible)|
|fuse protection type in the feeder|recommended LS switch: B/C 6 A/3 A|
|**output**<br>~~ee~~||
|voltage curve at output<br>~~ee~~|Controlled, isolated DC voltage<br>~~ee~~|
|output voltage at DC rated value|24 V|
|output voltage||
|● at output 1 at DC rated value|24 V|
|output voltage adjustable|Yes; viapotentiometer|
|adjustable output voltage|22.8 ... 28 V|
|relative overall tolerance of the voltage|3 %|
|relative controlprecision of the output voltage||
|● on slow fluctuation of input voltage|0.1 %|
|● on slow fluctuation of ohm loading|1 %|
|residual ripple||
|● maximum|150 mV|
|● typical|50 mV|
|voltagepeak||
|● maximum|240 mV|
|● typical|150 mV|



Subject to change without notice © Copyright Siemens 

6EP71336AB000BN0 Page 1/5 

5/17/2026 

|displayversion for normal operation|Green LED for 24 V OK|
|---|---|
|type of signal at output|Relaycontact(NO contact, rating60 V DC/ 0.3 A)for "24 V OK"|
|behavior of the output voltage when switchingon|Overshoot of Vout < 3 %|
|response delaymaximum|0.3 s|
|voltage increase time of the output voltage||
|● typical|30 ms|
|output current||
|● rated value|5 A|
|● rated range|0 ... 6 A; 5 A upto +60°C; +60 ... +70 °C: Derating3%/K|
|supplied activepower typical|120 W|
|short-term overload current||
|● on short-circuitingduringthe start-uptypical|15 A|
|● at short-circuit duringoperation typical|15 A|
|duration of overloadingcapabilityfor excess current||
|● on short-circuitingduringthe start-up|800 ms|
|● at short-circuit duringoperation|800 ms|
|bridgingof equipment|Yes|
|number of parallel-switched equipment resources for increasing<br>the power|2|
|**efficiency**||
|efficiencyinpercent|88 %|
|power loss[W]||
|● at rated output voltage for rated value of the output<br>current typical|17 W|
|● duringno-load operation maximum|2.7 W|
|**closed-loop control**||
|relative control precision of the output voltage with rapid<br>fluctuation of the input voltage by+/- 15% typical|0.3 %|
|relative control precision of the output voltage at load step of<br>resistive load 10/90/10 % typical|3 %|
|settingtime||
|● load step10 to 90% typical|1 ms|
|● load step 90 to 10% typical|1 ms|
|**protection and monitoring**||
|design of the overvoltageprotection|protection against overvoltage in case of internal fault Vout < 31.8 V|
|propertyof the output short-circuitproof|Yes|
|design of short-circuitprotection|Constant current characteristic|
|response value current limitation|7 ... 7.5 A|
|overcurrent overload capability||
|● in normal operation|overload capability150 % Iout rated upto 5 s/min|
|enduringshort circuit current RMS value||
|● typical|7 A|
|**safety**||
|galvanic isolation between input and output|Yes|
|galvanic isolation|Output voltage: SELV, ES1(IEC 62368-1), DVC As(IEC 61204-7)|
|operatingresourceprotection class|Class I|
|leakage current||
|● maximum|3.5 mA|
|● typical|1 mA|
|protection class IP|IP20|
|**EMC**||
|standard||
|● for emitted interference|EN 61000-6-3 Class B|
|● for mains harmonics limitation|EN 61000-3-2|
|● for interference immunity|EN 61000-6-2|
|**standards, specifications, approvals**||
|certificate of suitability||
|● CE marking|Yes|
|● UL approval|Yes; cULus-Listed (UL61010-2-201, CSA C22.2 No.142)|



Subject to change without notice © Copyright Siemens 

6EP71336AB000BN0 Page 2/5 

5/17/2026 

|● EAC approval|Yes|
|---|---|
|● NEC Class 2|No|
|type of certification||
|● CB-certificate|Yes|
|MTBF at 40 °C|1 598 441 h|
|**standards, specifications, approvals hazardous environments**||
|certificate of suitability||
|● IECEx|Yes; IECEx Ex ec nC IIC T3 Gc|
|● ATEX|Yes; ATEX(EX)II 3G Ex ec nC IIC T3 Gc|
|● ULhazloc approval|Yes|
|● UKEX|Yes|
|**standards, specifications, approvals marine classification**||
|shipbuildingapproval|Yes|
|Marine classification association||
|● American Bureau of ShippingEurope Ltd.(ABS)|No|
|● French marine classification society (BV)|Yes|
|● Det Norske Veritas(DNV)|Yes|
|● Lloyds Register of Shipping (LRS)|No|
|**standards, specifications, approvals Environmental Product Declaration**||
|Environmental Product Declaration|Yes|
|global warming potential[CO2 eq]||
|● total|474.8 kg|
|● duringmanufacturing|9.4 kg|
|● duringoperation|465 kg|
|● after end of life|0.35 kg|
|**ambient conditions**||
|ambient temperature||
|● duringoperation|-30 ... +70 °C; with natural convection|
|● duringtransport|-40 ... +85 °C|
|● duringstorage|-40 ... +85 °C|
|environmental categoryaccordingto IEC 60721|Climate class 3K3, 5 ... 95% no condensation|
|**connection method**||
|type of electrical connection|push-in terminals|
|● at input|L, N, PE: 1push-in terminal each for 0.2 ... 2.5 mm² single-core/finelystranded|
|● at output|+, -: 2push-in terminals each for 0.2 ... 2.5 mm²|
|● for auxiliarycontacts|Signalingcontact: 2push-in terminals for 0.2 ... 2.5 mm²|
|● for signalingcontact|2push-in terminals for 0.2 ... 2.5 mm²|
|removable terminal at input|Yes|
|removable terminal at output|Yes|
|**mechanical data**||
|width × height × depth of the enclosure|160 × 117 × 74 mm|
|installation width × mountingheight|160 mm × 174 mm|
|required spacing||
|● top|50 mm|
|● bottom|50 mm|
|● left|0 mm|
|● right|0 mm|
|fasteningmethod|Snaps onto DIN rail EN 60715 35x7.5/15|
|● DIN-rail mounting|Yes|
|● S7 rail mounting|No|
|● wall mounting|No|
|housingcan be lined up|Yes|
|net weight|0.5 kg|
|**accessories**||
|electrical accessories|Redundancymodule, buffer module, selectivitymodule, DC UPS|
|**further information internet links**||
|internet link||
|● to website: Industry Mall|https://mall.industry.siemens.com|



Subject to change without notice © Copyright Siemens 

6EP71336AB000BN0 Page 3/5 

5/17/2026 

|● to webpage: selection aid TIA Selection Tool|https://www.siemens.com/tstcloud|
|---|---|
|● to webpage:power supplies|https://siemens.com/sitop|
|● to website: CAx-Download-Manager|https://siemens.com/cax|
|● to website: IndustryOnline Support|https://support.industry.siemens.com|
|**additional information**<br>~~SS~~||
|other information|Specifications at rated input voltage and ambient temperature +25 °C (unless|
||otherwise specified)|
|**security information**<br>~~ee~~||
|security information|Siemens provides products and solutions with industrial cybersecurity functions|
||that support the secure operation of plants, systems, machines and networks.|
||In order to protect plants, systems, machines and networks against cyber|
||threats, it is necessary to implement - and continuously maintain - a holistic,|
||state-of-the-art industrial cybersecurity concept. Siemens’ products and|
||solutions constitute one element of such a concept. Customers are responsible|
||for preventing unauthorized access to their plants, systems, machines and|
||networks. Such systems, machines and components should only be connected|
||to an enterprise network or the internet if and to the extent such a connection is|
||necessary and only when appropriate security measures (e.g. firewalls and/or|
||network segmentation) are in place. For additional information on industrial|
||cybersecurity measures that may be implemented, please visit|
||www.siemens.com/cybersecurity-industry. Siemens’ products and solutions|
||undergo continuous development to make them more secure. Siemens strongly|
||recommends that product updates are applied as soon as they are available|
||and that the latest product versions are used. Use of product versions that are|
||no longer supported, and failure to apply the latest updates may increase|
||customer’s exposure to cyber threats. To stay informed about product updates,|
||subscribe to the Siemens Industrial Cybersecurity RSS Feed under|
||https://www.siemens.com/cert.(V4.7)|



## **Classifications** 

||||||||**Version**|**Classification**|
|---|---|---|---|---|---|---|---|---|
|||||eClass|||14|27-04-07-01|
|||||eClass|||12|27-04-07-01|
|||||eClass|||9.1|27-04-07-01|
|||||eClass|||9|27-04-07-01|
|||||eClass|||8|27-04-90-02|
|||||eClass|||7.1|27-04-90-02|
|||||eClass|||6|27-04-90-02|
|||||ETIM|||10|EC002540|
|||||ETIM|||9|EC002540|
|||||ETIM|||8|EC002540|
|||||ETIM|||7|EC002540|
|||||IDEA|||4|4130|
|||||UNSPSC|||15|39-12-10-04|
|**Approvals Certificates**|||||||||
|Environmental Product Declaration|Environmental Product Declaration||||||||
|● global warming potential [CO2 eq] / during manufacturing|||9.4 kg||||||
|● global warming potential [CO2 eq] / during operation|||465 kg||||||
|● global warming potential [CO2 eq] / after end of life|||0.35 kg||||||
|● global warming potential [CO2 eq] / total|||474.8 kg||||||
|**Environment**|**General Product Approval**|||||||**For use in hazard-**<br>**ous locations**|
|bh<br>EPD|CB<br>co|Manufacturer Declara-<br>tion||C€||China RoHS<br>~~a~~|||ECEx|
|**For use in hazardous locations**|**For use in hazardous locations**|||||**Maritime application**|||



Subject to change without notice © Copyright Siemens 

6EP71336AB000BN0 Page 4/5 

5/17/2026 

Miscellaneous CCC ~~—~~ -Ex 

**last modified:** 5/5/2026 

Subject to change without notice © Copyright Siemens 

6EP71336AB000BN0 Page 5/5 

5/17/2026