6EP3436-8MB00-2CY0

**6EP3436-8MB00-2CY0** 

**Data sheet** 

SITOP PSU8600/3AC/24VDC/20A/4X5A PN 

SITOP PSU8600 3AC 20 A/4x5 A PN stabilized power supply input: 400-500 V 3 AC output: 24 V DC/20 A/4x 5 A with PN/IE connection web server integrated OPC UA server integrated 

||SITOP PSU8600/3AC/24VDC/20A/4X5A PN<br>SITOP PSU8600 3AC 20 A/4x5 A PN stabilized power supply input: 400-500 V 3<br>AC output: 24 V DC/20 A/4x 5 A with PN/IE connection web server integrated OPC<br>UA server integrated|
|---|---|
|**General information**||
|Technical Product Detail Page|https://i.siemens.com/1P6EP3436-8MB00-2CY0|
|**input**||
|type of thepower supplynetwork|3-phase AC|
|supplyvoltage at AC||
|● minimum rated value|400 V|
|● maximum rated value|500 V|
|● initial value|320 V|
|● full-scale value|575 V|
|supplyvoltage at AC|Derating320 ... 360 and 530 ... 575 V|
|wide range input|Yes|
|buffering time for rated value of the output current in the event of<br>power failure minimum|15 ms|
|operating condition of the mains buffering|at Vin = 400 V; Prioritized supply of Output 1 in case of power failure selectable<br>via DIP switch|
|line frequency|50/60 Hz|
|line frequency|47 ... 63 Hz|
|input current||
|● at rated input voltage 400 V|1.4 A|
|● at rated input voltage 500 V|1.1 A|
|current limitation of inrush current at 25 °C maximum|14 A|
|I2t value maximum|1.2 A²·s|
|fuseprotection type|none|
|fuse protection type in the feeder|Required: 3-pole connected miniature circuit breaker 6 ... 16 A characteristic C<br>or circuit breaker 3RV2011-1DA10(setting3 A)or 3RV2711-1DD10(UL 489)|
|**output**||
|voltage curve at output|Controlled, isolated DC voltage|
|number of outputs|4|
|output voltage at DC rated value|24 V|
|output voltage||
|● at output 1 at DC rated value|24 V|
|● at output 2 at DC rated value|24 V|
|● at output 3 at DC rated value|24 V|
|● at output 4 at DC rated value|24 V|
|output voltage adjustable|Yes; viapotentiometer or IE/PN interface|
|adjustable output voltage|4 ... 28 V; Derating > 24 V: 4%/V; max. 120 W per output, max. 480 W overall<br>system|
|relative overall tolerance of the voltage|3 %|
|relative controlprecision of the output voltage||
|● on slow fluctuation of input voltage|0.2 %|



6EP34368MB002CY0 Page 1/5 

Subject to change without notice © Copyright Siemens 

6/3/2026 

|● on slow fluctuation of ohm loading|0.1 %|
|---|---|
|residual ripple||
|● maximum|100 mV|
|voltagepeak||
|● maximum|200 mV|
|display version for normal operation|3-color LED for operating state device; LED for operating mode manual/remote;<br>4 LEDs for communication PROFINET; 3-color LED per output for operating<br>state output; LEDgreen forparallel operation Output 1 and 2 / 3 and 4|
|type of signal at output|Relay contact (changeover contact, contact current capacity DC 60 V/0.3 A) for<br>"Operatingstate OK"|
|behavior of the output voltage when switchingon|No overshoot of Vout(soft start)|
|response delaymaximum|1 s; Without on-delayof the outputs|
|type of outputs connection|simultaneous switch-on of all outputs after device power-up or delay time of 25<br>ms, 100 ms, or "load-optimized" for sequential switch-on of the outputs via DIP<br>switch configurable|
|voltage increase time of the output voltage||
|● maximum|500 ms|
|output current||
|● rated value|20 A|
|●per output|5 A|
|● at output 1 rated value|5 A|
|● at output 2 rated value|5 A|
|● at output 3 rated value|5 A|
|● at output 4 rated value|5 A|
|● rated range|0 ... 20 A; +50 ... +60 °C: Derating 2.5%/K; no derating in connection with<br>expansion module CNX8600 and total load of the outputs at the basic device<br>max. 240 W|
|supplied activepower typical|480 W|
|parallel switching of outputs|Yes; Parallel circuit Output 1 with 2 or Output 3 with 4 can be selected via DIP<br>switch|
|bridgingof equipment|No|
|**efficiency**||
|efficiencyinpercent|93 %|
|power loss[W]||
|● at rated output voltage for rated value of the output<br>current typical|34 W|
|● duringno-load operation maximum|12 W|
|**closed-loop control**||
|relative control precision of the output voltage with rapid<br>fluctuation of the input voltage by+/- 15% typical|0.1 %|
|relative control precision of the output voltage load step of<br>resistive load 50/100/50 % typical|0.4 %|
|settingtime||
|● maximum|10 ms|
|**protection and monitoring**||
|design of the overvoltageprotection|max. 35 V(max. 500 ms)|
|propertyof the output short-circuitproof|Yes|
|design of short-circuit protection|electronic overload cut-off; optionally constant current operation can be<br>selected for Output 4 via DIP switches|
|adjustable current response value current of the current-<br>dependent overload release|0.5 ... 5 A|
|type of response value setting|viapotentiometer or IE/PN interface|
|switchingcharacteristic||
|● of the excess current|Ia >1.0...<1.5 x Ia threshold for 5 s permissible; Ia limit (= 1.5 x Ia threshold) for<br>200 mspermissible|
|● of the current limitation|Ia limit (= 1.5 x Ia threshold) permissible for 5 s, afterwards Ia threshold<br>continuous|
|overcurrent overload capability||
|● in normal operation|Total system overloadable 150% Ia rated to 5 s/min|
|display version for overload and short circuit|3-color LED for operating state device; 3-color LED per output for operating<br>state output|
|design of the reset device/resettingmechanism|via sensorper output or IE/PN interface|
|remote reset function|non-isolated 24 V input (signal level "high" at > 15 V)|



6EP34368MB002CY0 Page 2/5 

Subject to change without notice © Copyright Siemens 

6/3/2026 

||**interfaces**|**interfaces**||
|---|---|---|---|
||product function communication function|Yes||
||design of the interface|Ethernet/PROFINET||
||● design of the interface PROFINETprotocol|Yes||
||protocol is supported|||
||● OPC UA|Yes||
||**safety**|||
||galvanic isolation between input and output|Yes||
||galvanic isolation|Output voltage: SELV, ES1(IEC 62368-1), DVC As(IEC 61204-7)||
||operatingresourceprotection class|Class I||
||leakage current|||
||● maximum|3.5 mA||
||protection class IP|IP20||
||**EMC**|||
||standard|||
||● for emitted interference|EN 55022 Class B||
||● for mains harmonics limitation|EN 61000-3-2||
||● for interference immunity|EN 61000-6-2||
||**standards, specifications, approvals**|||
||certificate of suitability|||
||● CE marking|Yes||
||● UL approval|Yes; cULus-Listed(UL 508, CSA C22.2 No. 107.1), File E197259||
||● EAC approval|Yes||
||● NEC Class 2|No||
||● SEMI F47|Yes||
||type of certification|||
||● BIS|Yes; R-41188271||
||● CB-certificate|Yes||
||MTBF at 40 °C|243 178 h||
||**standards, specifications, approvals hazardous environments**|||
||certificate of suitability|||
||● IECEx|No||
||● ATEX|No||
||● ULhazloc approval|No||
||● FM registration|No||
||**standards, specifications, approvals marine classification**|||
||shipbuildingapproval|Yes||
||Marine classification association|||
||● American Bureau of ShippingEurope Ltd.(ABS)|Yes||
||● French marine classification society (BV)|No||
||● Det Norske Veritas(DNV)|Yes||
||● Lloyds Register of Shipping (LRS)|No||
||**standards, specifications, approvals Environmental Product Declaration**|||
||Environmental Product Declaration|Yes||
||global warming potential[CO2 eq]|||
||● total|909.7 kg||
||● duringmanufacturing|47.8 kg||
||● duringoperation|861 kg||
||● after end of life|0.4 kg||
||**ambient conditions**|||
||ambient temperature|||
||● duringoperation|-25 ... +60 °C; with natural convection||
||● duringtransport|-40 ... +85 °C||
||● duringstorage|-40 ... +85 °C||
||environmental categoryaccordingto IEC 60721|Climate class 3K3, 5 ... 95% no condensation||
||**connection method**|||
||type of electrical connection|Plug-in terminals with screwed connection||
||● at input|L1, L2, L3, PE: Plug-in terminal with 1 screwed connection each for 0.2 ... 4<br>mm² single-wire / fine stranded||



6EP34368MB002CY0 Page 3/5 

Subject to change without notice © Copyright Siemens 

6/3/2026 

|● at output|1, 2, 3, 4: Two plug-in terminals (1, 2 and 3, 4) with 2 screwed connections<br>each for 0.2 ... 2.5 mm²; 0 V: Plug-in terminal with 3 screwed connections for<br>0.2 ... 4 mm²|1, 2, 3, 4: Two plug-in terminals (1, 2 and 3, 4) with 2 screwed connections<br>each for 0.2 ... 2.5 mm²; 0 V: Plug-in terminal with 3 screwed connections for<br>0.2 ... 4 mm²|1, 2, 3, 4: Two plug-in terminals (1, 2 and 3, 4) with 2 screwed connections<br>each for 0.2 ... 2.5 mm²; 0 V: Plug-in terminal with 3 screwed connections for<br>0.2 ... 4 mm²|
|---|---|---|---|
|● for auxiliary contacts|RST (Reset): Plug-in terminal (together with alarm signal) with 1 screwed<br>connection for 0.2 ... 1.5 mm²|||
|● for signaling contact|11, 12, 14 (alarm signal): Plug-in terminal (together with Reset) with 1 screwed<br>connection each for 0.2 ... 1.5 mm²|||
|removable terminal at input|Yes|||
|removable terminal at output|Yes|||
|design of the interface for communication|PROFINET/Ethernet: two RJ45 sockets(2-port switch)|||
|suitabilityfor interaction modular system|Yes|||
|**mechanical data**||||
|width × height × depth of the enclosure|100 × 125 × 150 mm|||
|installation width × mountingheight|100 mm × 225 mm|||
|required spacing||||
|● top|50 mm|||
|● bottom|50 mm|||
|● left|0 mm|||
|● right|0 mm|||
|fasteningmethod|Snaps onto DIN rail EN 60715 35x15|||
|● DIN-rail mounting|Yes|||
|● S7 rail mounting|No|||
|● wall mounting|No|||
|housingcan be lined up|Yes|||
|net weight|2 kg|||
|**accessories**||||
|electrical accessories|Expansion modules CNX8600, buffer modules BUF8600, module UPS8600|||
|mechanical accessories|Device identification label 20 mm × 7 mm, TI-grey3RT2900-1SB20|||
|**further information internet links**||||
|internet link||||
|● to website: IndustryMall|https://mall.industry.siemens.com|||
|● to webpage: selection aid TIA Selection Tool|https://www.siemens.com/tstcloud|||
|● to webpage:power supplies|https://siemens.com/sitop|||
|● to website: CAx-Download-Manager|https://siemens.com/cax|||
|● to website: IndustryOnline Support|https://support.industry.siemens.com|||
|**additional information**||||
|other information|Specifications at rated input voltage and ambient temperature +25 °C (unless<br>otherwise specified)|||
|**security information**||||
|security information|Siemens provides products and solutions with industrial cybersecurity functions<br>that support the secure operation of plants, systems, machines and networks.<br>In order to protect plants, systems, machines and networks against cyber<br>threats, it is necessary to implement - and continuously maintain - a holistic,<br>state-of-the-art industrial cybersecurity concept. Siemens’ products and<br>solutions constitute one element of such a concept. Customers are responsible<br>for preventing unauthorized access to their plants, systems, machines and<br>networks. Such systems, machines and components should only be connected<br>to an enterprise network or the internet if and to the extent such a connection is<br>necessary and only when appropriate security measures (e.g. firewalls and/or<br>network segmentation) are in place. For additional information on industrial<br>cybersecurity measures that may be implemented, please visit<br>www.siemens.com/cybersecurity-industry. Siemens’ products and solutions<br>undergo continuous development to make them more secure. Siemens strongly<br>recommends that product updates are applied as soon as they are available<br>and that the latest product versions are used. Use of product versions that are<br>no longer supported, and failure to apply the latest updates may increase<br>customer’s exposure to cyber threats. To stay informed about product updates,<br>subscribe to the Siemens Industrial Cybersecurity RSS Feed under<br>https://www.siemens.com/cert.(V4.7)|||
|**Classifications**||||
|||**Version**|**Classification**|
||eClass<br>eClass<br>eClass|14<br>12<br>9.1|27-04-07-01<br>27-04-07-01<br>27-04-07-01|



6EP34368MB002CY0 Page 4/5 

Subject to change without notice © Copyright Siemens 

6/3/2026 

eClass 9 27-04-07-01 eClass 8 27-04-90-02 eClass 7.1 27-04-90-02 eClass 6 27-04-90-02 ETIM 10 EC002540 ETIM 9 EC002540 ETIM 8 EC002540 ETIM 7 EC002540 IDEA 4 4130 UNSPSC 15 39-12-10-04 **Approvals Certificates** ~~ee~~ Environmental Product Declaration ● global warming potential [CO2 eq] / during manufacturing 47.8 kg ● global warming potential [CO2 eq] / during operation 861 kg ● global warming potential [CO2 eq] / after end of life 0.4 kg ● global warming potential [CO2 eq] / total 909.7 kg **Environment General Product Approval** Manufacturer DeclaraDeclaration of Con- ~~:~~ tion formity : EPD CB cA C€“- **General Product Approval Maritime application** China RoHS BIS CRS 

## **Industrial Communication** 

## PROFINET 

**last modified:** 

5/5/2026 

6EP34368MB002CY0 Page 5/5 

Subject to change without notice © Copyright Siemens 

6/3/2026