6EP1334-1LD00

**6EP1334-1LD00** 

**Data sheet** 

||SITOP PSU100D/1AC/24VDC/12.5A<br>********** spare part ********* PSU100D 24 V/12.5 A stabilized power supply input:<br>100-240 V AC output: 24 V DC/12.5 A|
|---|---|
|**input**<br>~~|~~||
|type of thepower supplynetwork<br>~~|~~|1-phase AC<br>~~|~~|
|supplyvoltage at AC||
|● minimum rated value|100 V|
|● maximum rated value|240 V|
|● initial value|85 V|
|● full-scale value|264 V|
|wide range input|Yes|
|buffering time for rated value of the output current in the event of<br>power failure minimum|15 ms|
|operatingcondition of the mains buffering|at Vin = 115/230 V|
|line frequency|50/60 Hz|
|line frequency|47 ... 63 Hz|
|input current||
|● at rated input voltage 100 V|4 A|
|● at rated input voltage 240 V|2 A|
|current limitation of inrush current at 25 °C maximum|60 A|
|I2t value maximum|1.1 A²·s|
|fuseprotection type|internal|
|fuse protection type in the feeder|Recommended miniature circuit breaker: from 10 A characteristic C or from 16<br>A characteristic B|
|**output**<br>~~|~~||
|voltage curve at output<br>~~|~~|Controlled, isolated DC voltage<br>~~|~~|
|output voltage at DC rated value|24 V|
|output voltage||
|● at output 1 at DC rated value|24 V|
|output voltage adjustable|Yes; viapotentiometer|
|adjustable output voltage|22 ... 28 V|
|relative overall tolerance of the voltage|2 %|
|relative controlprecision of the output voltage||
|● on slow fluctuation of input voltage|0.5 %|
|● on slow fluctuation of ohm loading|0.5 %|
|residual ripple||
|● maximum|100 mV|
|voltagepeak||
|● maximum|100 mV|
|displayversion for normal operation|Green LED for 24 V OK|
|type of signal at output|-|
|behavior of the output voltage when switchingon|Overshoot of Vout < 2 %|
|response delaymaximum|1 s|
|voltage increase time of the output voltage||
|● maximum|30 ms|
|output current||
|● rated value|12.5 A|
|● rated range|0 ... 12.5 A; +50 ... +70 °C: Derating2.5%/K|
|supplied activepower typical|300 W|
|bridgingof equipment|Yes|
|number of parallel-switched equipment resources for increasing<br>the power|2|



Subject to change without notice © Copyright Siemens 

6EP13341LD00 Page 1/4 

5/19/2026 

|**efficiency**|**efficiency**|
|---|---|
|efficiencyinpercent|86 %|
|power loss[W]||
|● at rated output voltage for rated value of the output<br>current typical|48 W|
|**closed-loop control**||
|relative control precision of the output voltage with rapid<br>fluctuation of the input voltage by+/- 15% typical|0.5 %|
|relative control precision of the output voltage load step of<br>resistive load 50/100/50 % typical|5 %|
|**protection and monitoring**||
|design of the overvoltageprotection|< 35 V|
|propertyof the output short-circuitproof|Yes|
|design of short-circuitprotection|Electronic shutdown, automatic restart|
|● typical|15 A|
|enduringshort circuit current RMS value||
|● typical|15 A|
|**safety**||
|galvanic isolation between input and output|Yes|
|galvanic isolation|Safetyextra low output voltage Vout accordingto EN 60950-1|
|operatingresourceprotection class|Class I|
|leakage current||
|● maximum|3.5 mA|
|● typical|1 mA|
|protection class IP|IP20|
|**EMC**||
|standard||
|● for emitted interference|EN 55022 Class B|
|● for mains harmonics limitation|EN 61000-3-2|
|● for interference immunity|EN 61000-6-2|
|**standards, specifications, approvals**||
|certificate of suitability||
|● CE marking|Yes|
|● UL approval|Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus (UL<br>60950-1, CSA C22.2 No. 60950-1), File E151273|
|● EAC approval|Yes|
|● NEC Class 2|No|
|type of certification||
|● CB-certificate|Yes|
|**standards, specifications, approvals hazardous environments**||
|certificate of suitability||
|● IECEx|No|
|● ATEX|No|
|● ULhazloc approval|No|
|● FM registration|No|
|**standards, specifications, approvals marine classification**||
|shipbuildingapproval|No|
|Marine classification association||
|● American Bureau of ShippingEurope Ltd.(ABS)|No|
|● French marine classification society (BV)|No|
|● Det Norske Veritas(DNV)|No|
|● Lloyds Register of Shipping (LRS)|No|
|**standards, specifications, approvals Environmental Product Declaration**||
|Environmental Product Declaration|Yes|
|global warming potential[CO2 eq]||
|● total|1 517.8 kg|
|● duringmanufacturing|16 kg|
|● duringoperation|1 501.3 kg|
|● after end of life|0.24 kg|



Subject to change without notice © Copyright Siemens 

6EP13341LD00 Page 2/4 

5/19/2026 

|**ambient conditions**||||
|---|---|---|---|
|ambient temperature||||
|● duringoperation|-10 ... +70 °C; with forced convection(ventilator)|||
|● duringtransport|-40 ... +85 °C|||
|● duringstorage|-40 ... +85 °C|||
|**connection method**||||
|type of electrical connection|screw terminal|||
|● at input|L, N, PE: 1 screw terminal each for 0.5 ... 1.3 mm² single-core/finelystranded|||
|● at output|+, -: 2 screw terminals each for 0.5 ... 1.3 mm²|||
|● for auxiliarycontacts|-|||
|**mechanical data**||||
|width × height × depth of the enclosure|105 × 199 × 41 mm|||
|required spacing||||
|● top|20 mm|||
|● bottom|0 mm|||
|● left|20 mm|||
|● right|20 mm|||
|fasteningmethod|Wall mounting|||
|● DIN-rail mounting|No|||
|● S7 rail mounting|No|||
|● wall mounting|Yes|||
|net weight|0.81 kg|||
|**further information internet links**||||
|internet link||||
|● to website: IndustryMall|https://mall.industry.siemens.com|||
|● to webpage: selection aid TIA Selection Tool|https://www.siemens.com/tstcloud|||
|● to website: CAx-Download-Manager|https://siemens.com/cax|||
|● to website: IndustryOnline Support|https://support.industry.siemens.com|||
|**additional information**||||
|other information|Specifications at rated input voltage and ambient temperature +25 °C (unless<br>otherwise specified)|||
|**security information**||||
|security information|Siemens provides products and solutions with industrial cybersecurity functions<br>that support the secure operation of plants, systems, machines and networks.<br>In order to protect plants, systems, machines and networks against cyber<br>threats, it is necessary to implement - and continuously maintain - a holistic,<br>state-of-the-art industrial cybersecurity concept. Siemens’ products and<br>solutions constitute one element of such a concept. Customers are responsible<br>for preventing unauthorized access to their plants, systems, machines and<br>networks. Such systems, machines and components should only be connected<br>to an enterprise network or the internet if and to the extent such a connection is<br>necessary and only when appropriate security measures (e.g. firewalls and/or<br>network segmentation) are in place. For additional information on industrial<br>cybersecurity measures that may be implemented, please visit<br>www.siemens.com/cybersecurity-industry. Siemens’ products and solutions<br>undergo continuous development to make them more secure. Siemens strongly<br>recommends that product updates are applied as soon as they are available<br>and that the latest product versions are used. Use of product versions that are<br>no longer supported, and failure to apply the latest updates may increase<br>customer’s exposure to cyber threats. To stay informed about product updates,<br>subscribe to the Siemens Industrial Cybersecurity RSS Feed under<br>https://www.siemens.com/cert.(V4.7)|||
|**Classifications**||||
|||**Version**|**Classification**|
||eClass<br>eClass<br>eClass<br>eClass<br>eClass<br>eClass<br>eClass<br>ETIM|14<br>12<br>9.1<br>9<br>8<br>7.1<br>6<br>10|27-04-07-01<br>27-04-07-01<br>27-04-07-01<br>27-04-07-01<br>27-04-90-02<br>27-04-90-02<br>27-04-90-02<br>EC002540|



|**ambient conditions**||||
|---|---|---|---|
|ambient temperature||||
|● duringoperation|-10 ... +70 °C; with forced convection(ventilator)|||
|● duringtransport|-40 ... +85 °C|||
|● duringstorage|-40 ... +85 °C|||
|**connection method**||||
|type of electrical connection|screw terminal|||
|● at input|L, N, PE: 1 screw terminal each for 0.5 ... 1.3 mm² single-core/finelystranded|||
|● at output|+, -: 2 screw terminals each for 0.5 ... 1.3 mm²|||
|● for auxiliarycontacts|-|||
|**mechanical data**||||
|width × height × depth of the enclosure|105 × 199 × 41 mm|||
|required spacing||||
|● top|20 mm|||
|● bottom|0 mm|||
|● left|20 mm|||
|● right|20 mm|||
|fasteningmethod|Wall mounting|||
|● DIN-rail mounting|No|||
|● S7 rail mounting|No|||
|● wall mounting|Yes|||
|net weight|0.81 kg|||
|**further information internet links**||||
|internet link||||
|● to website: IndustryMall|https://mall.industry.siemens.com|||
|● to webpage: selection aid TIA Selection Tool|https://www.siemens.com/tstcloud|||
|● to website: CAx-Download-Manager|https://siemens.com/cax|||
|● to website: IndustryOnline Support|https://support.industry.siemens.com|||
|**additional information**||||
|other information|Specifications at rated input voltage and ambient temperature +25 °C (unless<br>otherwise specified)|||
|**security information**||||
|security information|Siemens provides products and solutions with industrial cybersecurity functions<br>that support the secure operation of plants, systems, machines and networks.<br>In order to protect plants, systems, machines and networks against cyber<br>threats, it is necessary to implement - and continuously maintain - a holistic,<br>state-of-the-art industrial cybersecurity concept. Siemens’ products and<br>solutions constitute one element of such a concept. Customers are responsible<br>for preventing unauthorized access to their plants, systems, machines and<br>networks. Such systems, machines and components should only be connected<br>to an enterprise network or the internet if and to the extent such a connection is<br>necessary and only when appropriate security measures (e.g. firewalls and/or<br>network segmentation) are in place. For additional information on industrial<br>cybersecurity measures that may be implemented, please visit<br>www.siemens.com/cybersecurity-industry. Siemens’ products and solutions<br>undergo continuous development to make them more secure. Siemens strongly<br>recommends that product updates are applied as soon as they are available<br>and that the latest product versions are used. Use of product versions that are<br>no longer supported, and failure to apply the latest updates may increase<br>customer’s exposure to cyber threats. To stay informed about product updates,<br>subscribe to the Siemens Industrial Cybersecurity RSS Feed under<br>https://www.siemens.com/cert.(V4.7)|||
|**Classifications**||||
|||**Version**|**Classification**|
||eClass<br>eClass<br>eClass<br>eClass<br>eClass<br>eClass<br>eClass<br>ETIM|14<br>12<br>9.1<br>9<br>8<br>7.1<br>6<br>10|27-04-07-01<br>27-04-07-01<br>27-04-07-01<br>27-04-07-01<br>27-04-90-02<br>27-04-90-02<br>27-04-90-02<br>EC002540|



||**Version**|**Classification**|
|---|---|---|
|eClass|14|27-04-07-01|
|eClass|12|27-04-07-01|
|eClass|9.1|27-04-07-01|
|eClass|9|27-04-07-01|
|eClass|8|27-04-90-02|
|eClass|7.1|27-04-90-02|
|eClass|6|27-04-90-02|
|ETIM|10|EC002540|



Subject to change without notice © Copyright Siemens 

6EP13341LD00 Page 3/4 

5/19/2026 

ETIM 9 EC002540 ETIM 8 EC002540 ETIM 7 EC002540 IDEA 4 4130 UNSPSC 15 39-12-10-04 

**Approvals Certificates** ~~a~~ Environmental Product Declaration 

● global warming potential [CO2 eq] / during manufacturing 16 kg ● global warming potential [CO2 eq] / during operation 1501.3 kg ● global warming potential [CO2 eq] / after end of life 0.24 kg ● global warming potential [CO2 eq] / total 1517.8 kg 

**Environment General Product Approval** 

Manufacturer DeclaraDeclaration of ConChina RoHS tion formity ~~S~~ € 

**last modified:** 

3/26/2026 

Subject to change without notice © Copyright Siemens 

6EP13341LD00 Page 4/4 

5/19/2026