6EP1333-4BA00

**6EP1333-4BA00** 

**Data sheet** 

SIMATIC PM 1507/1AC/24VDC/8A 

SIMATIC PM 1507 24 V/8 A stabilized power supply for SIMATIC S7-1500 input: 120/230 V AC output: 24 V DC/8 A without Ex approval 

||SIMATIC PM 1507/1AC/24VDC/8A<br>SIMATIC PM 1507 24 V/8 A stabilized power supply for SIMATIC S7-1500 input:<br>120/230 V AC output: 24 V DC/8 A without Ex approval|
|---|---|
|**General information**<br>~~ee~~||
|Technical Product Detail Page<br>~~ee~~<br>~~|~~|https://i.siemens.com/1P6EP1333-4BA00<br>~~ee~~<br>~~|~~|
|**input**<br>~~|~~||
|type of thepower supplynetwork<br>~~|~~|1-phase AC<br>~~|~~|
|supplyvoltage at AC|Automatic range selection|
|supplyvoltage|120 V/230 V|
|input voltage 1 at AC|85 ... 132 V|
|input voltage 2 at AC|170 ... 264 V|
|wide range input|No|
|overvoltage overload capability|2.3 × Vin rated, 1.3 ms|
|buffering time for rated value of the output current in the event of<br>power failure minimum|20 ms|
|operatingcondition of the mains buffering|at Vin = 93/187 V|
|line frequency|50/60 Hz|
|line frequency|45 ... 65 Hz|
|input current||
|● at rated input voltage 120 V|3.7 A|
|● at rated input voltage 230 V|1.7 A|
|current limitation of inrush current at 25 °C maximum|62 A|
|duration of inrush current limitingat 25 °C||
|● maximum|3 ms|
|I2t value maximum|12 A²·s|
|fuseprotection type|T 6.3 A/250 V(not accessible)|
|fuse protection type in the feeder|Recommended miniature circuit breaker: 16 A characteristic B or 10 A<br>characteristic C|
|**output**<br>~~ee~~||
|voltage curve at output<br>~~ee~~|Controlled, isolated DC voltage<br>~~ee~~|
|output voltage at DC rated value|24 V|
|output voltage||
|● at output 1 at DC rated value|24 V|
|output voltage adjustable|No|
|relative overall tolerance of the voltage|1 %|
|relative controlprecision of the output voltage||
|● on slow fluctuation of input voltage|0.1 %|
|● on slow fluctuation of ohm loading|0.1 %|
|residual ripple||
|● maximum|50 mV|
|voltagepeak||
|● maximum|150 mV|



Subject to change without notice © Copyright Siemens 

6EP13334BA00 Page 1/5 

5/17/2026 

||displayversion for normal operation|LEDgreen for 24 V OK; LED red for error; LEDyellow for stand-by||
|---|---|---|---|
||behavior of the output voltage when switchingon|No overshoot of Vout(soft start)||
||response delaymaximum|1.5 s||
||voltage increase time of the output voltage|||
||● typical|10 ms||
||output current|||
||● rated value|8 A||
||● rated range|0 ... 8 A||
||supplied activepower typical|192 W||
||short-term overload current|||
||● on short-circuitingduringthe start-uptypical|35 A||
||● at short-circuit duringoperation typical|35 A||
||duration of overloadingcapabilityfor excess current|||
||● on short-circuitingduringthe start-up|70 ms||
||● at short-circuit duringoperation|70 ms||
||bridgingof equipment|Yes||
||number of parallel-switched equipment resources for increasing<br>the power|2||
||**efficiency**|||
||efficiencyinpercent|90 %||
||power loss[W]|||
||● at rated output voltage for rated value of the output<br>current typical|21 W||
||**closed-loop control**|||
||relative control precision of the output voltage with rapid<br>fluctuation of the input voltage by+/- 15% typical|0.1 %||
||relative control precision of the output voltage load step of<br>resistive load 50/100/50 % typical|2 %||
||relative control precision of the output voltage at load step of<br>resistive load 10/90/10 % typical|3 %||
||settingtime|||
||● load step10 to 90% typical|5 ms||
||● load step90 to 10% typical|5 ms||
||● maximum|5 ms||
||**protection and monitoring**|||
||design of the overvoltageprotection|Additional control loop, limitation(closed loopcontrol)at < 28.8 V||
||propertyof the output short-circuitproof|Yes||
||design of short-circuitprotection|Electronic shutdown, automatic restart||
||response value current limitation|8.4 ... 9.6 A||
||● typical|9 A||
||**safety**|||
||galvanic isolation between input and output|Yes||
||galvanic isolation|Output voltage: SELV, ES1(IEC 62368-1), DVC As(IEC 61204-7)||
||operatingresourceprotection class|Class I||
||leakage current|||
||● maximum|3.5 mA||
||● typical|1.3 mA||
||protection class IP|IP20||
||**EMC**|||
||standard|||
||● for emitted interference|EN 55022 Class B||
||● for mains harmonics limitation|EN 61000-3-2||
||● for interference immunity|EN 61000-6-2||
||**standards, specifications, approvals**|||
||certificate of suitability|||
||● CE marking|Yes||
||● UL approval|Yes; cULus-Listed(UL 508, CSA C22.2 No. 142), File E143289||
||● UKCA marking|Yes||
||● EAC approval|Yes||
||● Regulatory Compliance Mark (RCM)|Yes||



Subject to change without notice © Copyright Siemens 

6EP13334BA00 Page 2/5 

5/17/2026 

|● NEC Class 2|No|
|---|---|
|type of certification||
|● BIS|Yes; R-41183539|
|● CB-certificate|Yes|
|MTBF at 40 °C|1 362 918 h|
|**standards, specifications, approvals hazardous environments**||
|certificate of suitability||
|● IECEx|No|
|● ATEX|No|
|● ULhazloc approval|No|
|● UKEX|No|
|● CCC for hazardous zone accordingto GB standard|No|
|● FM registration|No|
|**standards, specifications, approvals marine classification**||
|shipbuildingapproval|Yes|
|Marine classification association||
|● American Bureau of ShippingEurope Ltd.(ABS)|Yes|
|● French marine classification society (BV)|Yes|
|● Det Norske Veritas(DNV)|Yes|
|● Lloyds Register of Shipping (LRS)|No|
|**standards, specifications, approvals Environmental Product Declaration**||
|Environmental Product Declaration|Yes|
|global warming potential[CO2 eq]||
|● total|589.1 kg|
|● duringmanufacturing|14 kg|
|● duringoperation|574.3 kg|
|● after end of life|0.51 kg|
|**ambient conditions**||
|ambient temperature||
|● duringoperation|0 ... 60 °C; with natural convection|
|● in horizontal mounting position duringoperation|0 ... 60 °C|
|● in vertical mounting position duringoperation|0 ... 40 °C|
|● duringtransport|-40 ... +85 °C|
|● duringstorage|-40 ... +85 °C|
|environmental categoryaccordingto IEC 60721|Climate class 3K3, 5 ... 95% no condensation|
|**connection method**||
|type of electrical connection|Screw-/springclampconnection|
|● at input|L, N, PE: 1 screw terminal each for 0.5 ... 2.5 mm²|
|● at output|L+, M: 2 spring-loaded terminals each for 0.5 to 2.5 mm²|
|removable terminal at input|Yes|
|removable terminal at output|Yes|
|**mechanical data**||
|width × height × depth of the enclosure|75 × 147 × 129 mm|
|installation width × mountingheight|75 mm × 205 mm|
|required spacing||
|● top|40 mm|
|● bottom|40 mm|
|● left|0 mm|
|● right|0 mm|
|fasteningmethod|Can be mounted onto S7-1500 rail|
|● DIN-rail mounting|No|
|● S7 rail mounting|Yes|
|● wall mounting|No|
|housingcan be lined up|Yes|
|net weight|0.74 kg|
|**further information internet links**||
|internet link||
|● to website: Industry Mall|https://mall.industry.siemens.com|



Subject to change without notice © Copyright Siemens 

6EP13334BA00 Page 3/5 

5/17/2026 

||● to webpage: selection aid TIA Selection Tool|https://www.siemens.com/tstcloud|
|---|---|---|
||● to webpage:power supplies|https://siemens.com/sitop|
||● to website: CAx-Download-Manager|https://siemens.com/cax|
||● to website: IndustryOnline Support|https://support.industry.siemens.com|
||identification link|Yes; acc. to IEC 61406-1:2022|
|**additional information**<br>~~rr~~|||
||other information|Specifications at rated input voltage and ambient temperature +25 °C (unless|
|||otherwise specified)|
|**security information**<br>security information<br>~~a~~||Siemens provides products and solutions with industrial cybersecurity functions|
|||that support the secure operation of plants, systems, machines and networks.|
|||In order to protect plants, systems, machines and networks against cyber|
|||threats, it is necessary to implement - and continuously maintain - a holistic,|
|||state-of-the-art industrial cybersecurity concept. Siemens’ products and|
|||solutions constitute one element of such a concept. Customers are responsible|
|||for preventing unauthorized access to their plants, systems, machines and|
|||networks. Such systems, machines and components should only be connected|
|||to an enterprise network or the internet if and to the extent such a connection is|
|||necessary and only when appropriate security measures (e.g. firewalls and/or|
|||network segmentation) are in place. For additional information on industrial|
|||cybersecurity measures that may be implemented, please visit|
|||www.siemens.com/cybersecurity-industry. Siemens’ products and solutions|
|||undergo continuous development to make them more secure. Siemens strongly|
|||recommends that product updates are applied as soon as they are available|
|||and that the latest product versions are used. Use of product versions that are|
|||no longer supported, and failure to apply the latest updates may increase|
|||customer’s exposure to cyber threats. To stay informed about product updates,|
|||subscribe to the Siemens Industrial Cybersecurity RSS Feed under|
|||https://www.siemens.com/cert.(V4.7)|



## **Classifications** 

||**Version**|**Classification**|
|---|---|---|
|eClass|14|27-04-07-01|
|eClass|12|27-04-07-01|
|eClass|9.1|27-04-07-01|
|eClass|9|27-04-07-01|
|eClass|8|27-04-90-02|
|eClass|7.1|27-04-90-02|
|eClass|6|27-04-90-02|
|ETIM|10|EC002540|
|ETIM|9|EC002540|
|ETIM|8|EC002540|
|ETIM|7|EC002540|
|IDEA|4|4130|
|UNSPSC|15|39-12-10-04|



**Approvals Certificates** ~~EE~~ Environmental Product Declaration 

● global warming potential [CO2 eq] / during manufacturing 14 kg ● global warming potential [CO2 eq] / during operation 574.3 kg ● global warming potential [CO2 eq] / after end of life 0.51 kg ● global warming potential [CO2 eq] / total 589.1 kg **Environment General Product Approval** 

Manufacturer Declaration ~~———~~ 

**General Product Approval** 

**For use in hazardous locations** 

Subject to change without notice © Copyright Siemens 

6EP13334BA00 Page 4/5 

5/17/2026 

**==> picture [412 x 260] intentionally omitted <==**

**----- Start of picture text -----**<br>
China RoHS en () Miscellaneous BIS CRS Miscellaneous<br>UL<br>For use in hazardous locations Maritime application<br>®  — FM CCC-Ex @® ®<br>ATEX UL<br>Maritime application<br>LES<br>last modified: 5/5/2026 G<br>**----- End of picture text -----**<br>


Subject to change without notice © Copyright Siemens 

6EP13334BA00 Page 5/5 

5/17/2026