6EP1322-1LD00

**6EP1322-1LD00** 

**Data sheet** 

SITOP PSU100D/1AC/12VDC/8.3A 

********** spare part ********* PSU100D 12 V/8.3 A stabilized power supply input: 100-240 V AC output: 12 V DC/8.3 A 

## **input** 

|SITOP PSU100D/1AC/12VDC/8.3A<br>********** spare part ********* PSU100D 12 V/8.3 A stabilized power supply input:<br>100-240 V AC output: 12 V DC/8.3 A<br>**input**<br>type of thepower supplynetwork<br>1-phase AC<br>supplyvoltage at AC<br>● minimum rated value<br>100 V<br>● maximum rated value<br>240 V<br>● initial value<br>85 V<br>● full-scale value<br>264 V<br>wide range input<br>Yes<br>buffering time for rated value of the output current in the event of<br>power failure minimum<br>15 ms<br>operatingcondition of the mains buffering<br>at Vin = 115/230 V<br>line frequency<br>50/60 Hz<br>line frequency<br>47 ... 63 Hz<br>input current<br>● at rated input voltage 100 V<br>2 A<br>● at rated input voltage 240 V<br>1.1 A<br>current limitation of inrush current at 25 °C maximum<br>75 A<br>I2t value maximum<br>5.5 A²·s<br>fuseprotection type<br>internal<br>fuse protection type in the feeder<br>Recommended miniature circuit breaker: from 10 A characteristic C or from 16<br>A characteristic B<br>**output**<br>voltage curve at output<br>Controlled, isolated DC voltage<br>output voltage at DC rated value<br>12 V<br>output voltage<br>● at output 1 at DC rated value<br>12 V<br>output voltage adjustable<br>Yes; viapotentiometer<br>adjustable output voltage<br>11 ... 14 V<br>relative overall tolerance of the voltage<br>2 %<br>relative controlprecision of the output voltage<br>● on slow fluctuation of input voltage<br>0.5 %<br>● on slow fluctuation of ohm loading<br>1 %<br>residual ripple<br>● maximum<br>100 mV<br>voltagepeak<br>● maximum<br>100 mV<br>displayversion for normal operation<br>Green LED for 12 V OK<br>behavior of the output voltage when switchingon<br>Overshoot of Vout < 2 %<br>response delaymaximum<br>1 s<br>voltage increase time of the output voltage<br>a<br>MEET Poy<br>;<br>ees.<br>‘|SITOP PSU100D/1AC/12VDC/8.3A<br>********** spare part ********* PSU100D 12 V/8.3 A stabilized power supply input:<br>100-240 V AC output: 12 V DC/8.3 A||
|---|---|---|
||Controlled, isolated DC voltage||
||12 V||
||||
||12 V||
||Yes; viapotentiometer||
||11 ... 14 V||
||2 %||
||||
||0.5 %||
||1 %||
||||
||100 mV||
||||
||100 mV||
||Green LED for 12 V OK||
||Overshoot of Vout < 2 %||
||1 s||
||||



Subject to change without notice © Copyright Siemens 

6EP13221LD00 Page 1/4 

6/5/2026 

|● maximum|30 ms|
|---|---|
|output current||
|● rated value|8.3 A|
|● rated range|0 ... 8.3 A; +50 ... +70 °C: Derating2.5%/K|
|supplied activepower typical|100 W|
|bridgingof equipment|Yes|
|number of parallel-switched equipment resources for increasing<br>the power|2|
|**efficiency**||
|efficiencyinpercent|84 %|
|power loss[W]||
|● at rated output voltage for rated value of the output<br>current typical|19 W|
|**closed-loop control**||
|relative control precision of the output voltage with rapid<br>fluctuation of the input voltage by+/- 15% typical|0.5 %|
|relative control precision of the output voltage load step of<br>resistive load 50/100/50 % typical|5 %|
|**protection and monitoring**||
|design of the overvoltageprotection|< 17.6 V|
|propertyof the output short-circuitproof|Yes|
|design of short-circuitprotection|Electronic shutdown, automatic restart|
|● typical|9.9 A|
|enduringshort circuit current RMS value||
|● typical|10 A|
|**safety**||
|galvanic isolation between input and output|Yes|
|galvanic isolation|Safetyextra low output voltage Vout accordingto EN 60950-1|
|operatingresourceprotection class|Class I|
|leakage current||
|● maximum|3.5 mA|
|● typical|1 mA|
|protection class IP|IP20|
|**EMC**||
|standard||
|● for emitted interference|EN 55022 Class B|
|● for mains harmonics limitation|EN 61000-3-2|
|● for interference immunity|EN 61000-6-2|
|**standards, specifications, approvals**||
|certificate of suitability||
|● CE marking|Yes|
|● UL approval|Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus (UL<br>60950-1, CSA C22.2 No. 60950-1), File E151273|
|● EAC approval|Yes|
|● NEC Class 2|No|
|type of certification||
|● CB-certificate|Yes|
|**standards, specifications, approvals hazardous environments**||
|certificate of suitability||
|● IECEx|No|
|● ATEX|No|
|● ULhazloc approval|No|
|● FM registration|No|
|**standards, specifications, approvals marine classification**||
|shipbuildingapproval|No|
|Marine classification association||
|● American Bureau of ShippingEurope Ltd.(ABS)|No|
|● French marine classification society (BV)|No|
|● Det Norske Veritas(DNV)|No|
|● Lloyds Register of Shipping (LRS)|No|



Subject to change without notice © Copyright Siemens 

6EP13221LD00 Page 2/4 

6/5/2026 

|**standards, specifications, approvals Environmental Product Declaration**|**standards, specifications, approvals Environmental Product Declaration**|**standards, specifications, approvals Environmental Product Declaration**|**standards, specifications, approvals Environmental Product Declaration**|
|---|---|---|---|
|Environmental Product Declaration|Yes|||
|global warming potential[CO2 eq]||||
|● total|605.8 kg|||
|● duringmanufacturing|11.3 kg|||
|● duringoperation|594.2 kg|||
|● after end of life|0.17 kg|||
|**ambient conditions**||||
|ambient temperature||||
|● duringoperation|-10 ... +70 °C; with natural convection|||
|● duringtransport|-40 ... +85 °C|||
|● duringstorage|-40 ... +85 °C|||
|**connection method**||||
|type of electrical connection|screw terminal|||
|● at input|L, N, PE: 1 screw terminal each for 0.3 ... 1.3 mm² single-core/finelystranded|||
|● at output|+, -: 2 screw terminals each for 0.3 ... 1.3 mm²|||
|● for auxiliarycontacts|-|||
|**mechanical data**||||
|width × height × depth of the enclosure|97 × 158 × 38 mm|||
|required spacing||||
|● top|20 mm|||
|● bottom|0 mm|||
|● left|20 mm|||
|● right|20 mm|||
|fasteningmethod|Wall mounting|||
|● DIN-rail mounting|No|||
|● S7 rail mounting|No|||
|● wall mounting|Yes|||
|net weight|0.57 kg|||
|**further information internet links**||||
|internet link||||
|● to website: IndustryMall|https://mall.industry.siemens.com|||
|● to webpage: selection aid TIA Selection Tool|https://www.siemens.com/tstcloud|||
|● to website: CAx-Download-Manager|https://siemens.com/cax|||
|● to website: IndustryOnline Support|https://support.industry.siemens.com|||
|**additional information**||||
|other information|Specifications at rated input voltage and ambient temperature +25 °C (unless<br>otherwise specified)|||
|**security information**||||
|security information|Siemens provides products and solutions with industrial cybersecurity functions<br>that support the secure operation of plants, systems, machines and networks.<br>In order to protect plants, systems, machines and networks against cyber<br>threats, it is necessary to implement - and continuously maintain - a holistic,<br>state-of-the-art industrial cybersecurity concept. Siemens’ products and<br>solutions constitute one element of such a concept. Customers are responsible<br>for preventing unauthorized access to their plants, systems, machines and<br>networks. Such systems, machines and components should only be connected<br>to an enterprise network or the internet if and to the extent such a connection is<br>necessary and only when appropriate security measures (e.g. firewalls and/or<br>network segmentation) are in place. For additional information on industrial<br>cybersecurity measures that may be implemented, please visit<br>www.siemens.com/cybersecurity-industry. Siemens’ products and solutions<br>undergo continuous development to make them more secure. Siemens strongly<br>recommends that product updates are applied as soon as they are available<br>and that the latest product versions are used. Use of product versions that are<br>no longer supported, and failure to apply the latest updates may increase<br>customer’s exposure to cyber threats. To stay informed about product updates,<br>subscribe to the Siemens Industrial Cybersecurity RSS Feed under<br>https://www.siemens.com/cert.(V4.7)|||
|**Classifications**||||
|||**Version**|**Classification**|
||eClass<br>eClass|14<br>12|27-04-07-01<br>27-04-07-01|



Subject to change without notice © Copyright Siemens 

6EP13221LD00 Page 3/4 

6/5/2026 

||||eClass||9.1|27-04-07-01|
|---|---|---|---|---|---|---|
||||eClass||9|27-04-07-01|
||||eClass||8|27-04-90-02|
||||eClass||7.1|27-04-90-02|
||||eClass||6|27-04-90-02|
||||ETIM||10|EC002540|
||||ETIM||9|EC002540|
||||ETIM||8|EC002540|
||||ETIM||7|EC002540|
||||IDEA||4|4130|
||||UNSPSC||15|39-12-10-04|
|**Approvals Certificates**<br>Environmental Product Declaration<br>● global warming potential [CO2 eq] / during manufacturing<br>11.3 kg<br>● global warming potential [CO2 eq] / during operation<br>594.2 kg<br>● global warming potential [CO2 eq] / after end of life<br>0.17 kg<br>● global warming potential [CO2 eq] / total<br>605.8 kg<br>**Environment**<br>**General Product Approval**<br>Manufacturer Declara-<br>tion<br>Declaration of Con-<br>formity<br>~~_ ~~<br>»|||<br>€|China RoHS<br> ~~a~~<br>~~—~~<br>@|||



~~hee~~ **General Product Approval** 

**last modified:** 

5/5/2026 

Subject to change without notice © Copyright Siemens 

6EP13221LD00 Page 4/4 

6/5/2026