6DL1132-6HD50-0PK0

**6DL1132-6HD50-0PK0** 

**Data sheet** 

SIMATIC ET 200SP HA, Signal relay module changeover contact, RQ 4x120VDC230VAC/5A CO HA suitable for terminal block K0, color code CC40, module diagnostics 

**==> picture [511 x 458] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||
|---|---|---|
|||General information|
|Product type designation|RQ 4x120VDC-230VAC/5A CO HA|
|Firmware version|V1.0|
|● FW update possible|Yes|
|Usable terminal block|type K0 (see system manual for details)|
|Color code for module-specific color-coded label|CC40|
|ee|Product function|
|● I&M data|Yes; I&M0 to I&M3|
|I|Engineering with|__|
|● STEP 7 TIA Portal configurable/integrated from version|V16|
|● STEP 7 configurable/integrated from version|V5.6|
|● PCS 7 configurable/integrated from version|V9.0|
|● PCS neo can be configured/integrated from version|V3.0|
|● PROFINET from GSD version/GSD revision|GSDML V2.3|
|ee|Redundancy|
|● Redundancy capability|No|
|||Supply voltage|
|Rated value (DC)|24 V|
|permissible range, lower limit (DC)|19.2 V|
|permissible range, upper limit (DC)|28.8 V|
|Reverse polarity protection|Yes|
|||Input current|
|Current consumption (rated value)|50 mA; At 24 V and energized changeover coils|
|Current consumption, max.|60 mA; At 19.2 V and energized changeover coils|
|||Power loss|
|Power loss, typ.|2.8 W; At 24 V, energized changeover coils and 5 A current across each|
|changeover contact|
|Address area|
|EEEEE——|Address space per module|
|● Address space per module, max.|1 byte; + 1 byte for QI information|
|||Digital outputs|
|Number of digital outputs|4|
|I|Switching frequency|__|
|● with resistive load, max.|2 Hz|
|● with inductive load, max.|0.5 Hz|
|● on lamp load, max.|2 Hz|

**----- End of picture text -----**<br>


Subject to change without notice © Copyright Siemens 

6DL11326HD500PK0 Page 1/3 

5/15/2026 

|Relayoutputs||||
|---|---|---|---|
|● Number of relayoutputs|4|||
|● externalprotection for relayoutputs|yes; 6 A, see data in manual|||
|Switchingcapacityof contacts||||
|— with inductive load, max.|2 A; 2 A(24 V DC), 0.5 A(60 V DC), 0.1 A(120 V DC)|||
|— with resistive load, max.|5 A; 5 A(30 V DC), 5 A(230 V AC)|||
|— Switchingcurrent, min.|8 mA|||
|— Rated switchingvoltage(DC)|24 V; 24 V DC to 120 V DC|||
|— Rated switchingvoltage(AC)|230 V; 24V AC to 230V AC|||
|Cable length||||
|● shielded, max.|1 000 m|||
|● unshielded, max.|200 m|||
|**Interrupts/diagnostics/status information**||||
|Diagnostics function|Yes|||
|Substitute values connectable|Yes|||
|Alarms||||
|● Diagnostic alarm|Yes|||
|Diagnoses||||
|● Monitoringthe supplyvoltage|Yes|||
|—parameterizable|Yes|||
|Diagnostics indication LED||||
|● MAINT LED|Yes; Yellow LED|||
|● Monitoringof the supplyvoltage(PWR-LED)|Yes;green PWR LED|||
|● Channel status display|Yes;green LED|||
|● for module diagnostics|Yes;green/red DIAG LED|||
|**Potential separation**||||
|Potential separation channels||||
|● between the channels|Yes|||
|● between the channels and backplane bus|Yes|||
|● Between the channels and load voltage L+|Yes|||
|**Permissible potential difference**||||
|between different circuits|Between channels: 230 V AC(different systemphase)|||
|between channels and backplane bus/supplyvoltage|230 V AC|||
|**Isolation**||||
|tested with||||
|● between channels and backplane bus/supplyvoltage|4 200 V DC/1 min, type test|||
|● between backplane bus and supplyvoltage|1 500 V DC/1 min, type test|||
|● Between channels|1 500 V AC/1 min, type test|||
|**Ambient conditions**||||
|Ambient temperature duringoperation||||
|● horizontal installation, min.|-40 °C; No icing|||
|● horizontal installation, max.|70 °C|||
|● vertical installation, min.|-40 °C; No icing|||
|● vertical installation, max.|60 °C|||
|Altitude duringoperation relatingto sea level||||
|● Ambient air temperature-barometric pressure-altitude|3 000 m due to converter type used|||
|**Dimensions**||||
|Width|22.5 mm|||
|Height|115 mm|||
|Depth|138 mm|||
|**Weights**||||
|Weight, approx.|162g|||
|**Classifications**||||
|||**Version**|**Classification**|
||eClass<br>eClass<br>eClass|14<br>12<br>9.1|27-24-26-04<br>27-24-26-04<br>27-24-26-04|



Subject to change without notice © Copyright Siemens 

6DL11326HD500PK0 Page 2/3 

5/15/2026 

eClass 9 27-24-26-04 eClass 8 27-24-26-04 eClass 7.1 27-24-26-04 eClass 6 27-24-26-04 ETIM 10 EC001599 ETIM 9 EC001599 ETIM 8 EC001599 ETIM 7 EC001599 ~~ee~~ **Approvals / Certificates General Product Approval** ce ec Miscellaneous © & @ **General Product Approval** China RoHS Manufacturer DeclaraMiscellaneous tion c ~~r Sr~~ **For use in hazardous locations Maritime application** Declaration of Conformity ~~—~~ © © aa **Maritime application Environment** - - NK / Nippon Kaiji Ky CCS (China Classifica okai tion Society) ~~=~~ & ~~—~~ EPD sanane 

**last modified:** 

4/30/2026 

Subject to change without notice © Copyright Siemens 

6DL11326HD500PK0 Page 3/3 

5/15/2026