6AG2333-0SB00-4AY0

**6AG2333-0SB00-4AY0** 

**Data sheet** 

SIPLUS PS PSU2600 24V5A TX RAIL 

SIPLUS PS PSU2600 24V/5A TX rail input: 110 V DC, output: 24 V DC/5 A, - 40…+70 °C, OT4 with ST1/2 (+85 °C for 10 minutes), 

## **General information** 

|4<br>a<br>ty<br>8<br>Z<br><—<br>it)a<br>_<br>Tr<br>ce<br>a<br>Ii<br>ihe|SIPLUS PS PSU2600 24V5A TX RAIL<br>SIPLUS PS PSU2600 24V/5A TX rail input: 110 V DC, output: 24 V DC/5 A, -<br>40…+70 °C, OT4 with ST1/2 (+85 °C for 10 minutes),|
|---|---|
|**General information**||
|Technical Product Detail Page|https://i.siemens.com/1P6AG2333-0SB00-4AY0|
|manufacturer's article number of the basic version used for<br>SIPLUS product versions|6EP4333-0SB00-0AY0|
|**input**||
|type of thepower supplynetwork|DC voltage|
|supplyvoltage at DC|110 V|
|input voltage at DC|77 ... 154 V|
|wide range input|Yes|
|buffering time for rated value of the output current in the event of<br>power failure minimum|20 ms|
|operatingcondition of the mains buffering|at Vin = 110 V|
|input current||
|● at rated input voltage 110 V|1.2 A|
|current limitation of inrush current at 25 °C maximum|25 A|
|fuseprotection type|internal|
|fuse protection type in the feeder|None required. Fuse protection startingfrom 6 A Char. C possible|
|**output**||
|voltage curve at output|Controlled, isolated DC voltage|
|output voltage at DC rated value|24 V|
|output voltage||
|● at output 1 at DC rated value|24 V|
|output voltage adjustable|Yes; viapotentiometer|
|adjustable output voltage|24 ... 28.8 V; max. 120 W|
|relative overall tolerance of the voltage|3 %|
|relative controlprecision of the output voltage||
|● on slow fluctuation of input voltage|0.1 %|
|● on slow fluctuation of ohm loading|0.2 %|
|residual ripple||
|● maximum|50 mV|
|voltagepeak||
|● maximum|200 mV|
|displayversion for normal operation|Green LED for 24 V OK|
|type of signal at output|Relaycontact(NO contact, rating60 V DC/ 0.3 A)for "24 V OK"|
|behavior of the output voltage when switchingon|No overshoot of Vout(soft start)|
|response delaymaximum|1.5 s|
|voltage increase time of the output voltage||
|● maximum|500 ms|
|output current||



6AG23330SB004AY0 Page 1/4 

Subject to change without notice © Copyright Siemens 

5/19/2026 

||● rated value|5 A||
|---|---|---|---|
||● rated range|0 ... 5 A; 5 A upto +60°C; 4 A upto +70°C||
||supplied activepower typical|120 W||
||constant overload current|||
||● on short-circuitingduringthe start-uptypical|6 A||
||bridgingof equipment|No||
||**efficiency**|||
||efficiencyinpercent|87 %||
||power loss[W]|||
||● at rated output voltage for rated value of the output<br>current typical|17.5 W||
||● duringno-load operation maximum|1 W||
||**closed-loop control**|||
||relative control precision of the output voltage with rapid<br>fluctuation of the input voltage by+/- 15% typical|0.1 %||
||relative control precision of the output voltage load step of<br>resistive load 50/100/50 % typical|1 %||
||settingtime|||
||● load step50 to 100% typical|0.2 ms||
||● load step100 to 50% typical|0.2 ms||
||relative control precision of the output voltage at load step of<br>resistive load 10/90/10 % typical|2 %||
||settingtime|||
||● load step10 to 90% typical|0.2 ms||
||● load step90 to 10% typical|0.2 ms||
||● maximum|10 ms||
||**protection and monitoring**|||
||design of the overvoltageprotection|< 32 V||
||propertyof the output short-circuitproof|Yes||
||design of short-circuitprotection|Shutdown andperiodic restart attempts||
||● typical|6 A||
||enduringshort circuit current RMS value|||
||● typical|6 A||
||**safety**|||
||galvanic isolation between input and output|Yes||
||galvanic isolation|Output voltage: SELV, ES1(IEC 62368-1), DVC As(IEC 61204-7)||
||operatingresourceprotection class|Class I||
||leakage current|||
||● maximum|3.5 mA||
||● typical|1.1 mA||
||protection class IP|IP20||
||**EMC**|||
||standard|||
||● for emitted interference|EN 50121-3-2||
||● for interference immunity|EN 50121-3-2||
||**standards, specifications, approvals**|||
||certificate of suitability|||
||● CE marking|Yes||
||**standards, specifications, approvals other**|||
||certificate of suitability|||
||● railwayapplication in accordance with EN 50121-3-2|Yes; EMC for rail vehicles||
||● railwayapplication in accordance with EN 50124-1|Yes; Rail vehicles - Overvoltage categoryOV2; Pollution degree PD2||
||● railwayapplication in accordance with EN 50125-1|Yes; Rail vehicles - see ambient conditions||
||● railway application in accordance with EN 50155|Yes; Rail vehicles - Temperature class OT4/ST1/ST2 max. 4 A, horizontal<br>installation, interruption class S3, switchingclass C1||
||● railwayapplication in accordance with EN 61373|Yes; Rail vehicles - vibrations and shocks: Category1 Class A/B||
||● fire protection in accordance with EN 45545-2|Yes; Rail vehicles - proof on request||
||**ambient conditions**|||
||ambient temperature|||
||● in horizontal mounting position during operation|-40 ... +70 °C; +85 °C for 10 min (OT4/ST1/ST2 acc. to EN 50155 at max. 4 A)||



6AG23330SB004AY0 Page 2/4 

Subject to change without notice © Copyright Siemens 

5/19/2026 

|● duringtransport|● duringtransport|-40 ... +85 °C|-40 ... +85 °C|-40 ... +85 °C|
|---|---|---|---|---|
|● duringstorage||-40 ... +85 °C|||
|installation altitude at height above sea level maximum||5 000 m|||
|ambient condition relating to ambient temperature - air pressure<br>- installation altitude||In case of operation at altitudes of 2000 - 5000 m above sea level: Output<br>power derating of -7.5 %/1000 m or reduction of the ambient temperature by 5<br>K/1000 m|||
|type of coating for electronic devices in railway applications<br>accordingto EN 50155||Yes; Protective coating of Class PC2 acc. to EN 50155:2017|||
|**connection method**|||||
|type of electrical connection||screw terminal|||
|● at input||Input, output and ground: 1 screw terminal each for 0.2 ... 2.5 mm² single-<br>core/finelystranded|||
|● at output||+, -: 2 screw terminals each for 0.2 ... 2.5 mm²|||
|● for auxiliarycontacts||13, 14(alarm signal): 1 screw terminal each for 0.05 ... 2.5 mm²|||
|**mechanical data**|||||
|width × height × depth of the enclosure||42 × 125 × 125 mm|||
|installation width × mountingheight||42 mm × 225 mm|||
|required spacing|||||
|● top||50 mm|||
|● bottom||50 mm|||
|● left||0 mm|||
|● right||0 mm|||
|fasteningmethod||Snaps onto DIN rail EN 60715 35x7.5/15|||
|● DIN-rail mounting||Yes|||
|● S7 rail mounting||No|||
|● wall mounting||No|||
|housingcan be lined up||Yes|||
|net weight||0.6 kg|||
|**further information internet links**|||||
|internet link|||||
|● to website: IndustryMall||https://mall.industry.siemens.com|||
|● to website: IndustryOnline Support||https://support.industry.siemens.com|||
|**additional information**|||||
|other information||Specifications at rated input voltage and ambient temperature +25 °C (unless<br>otherwise specified)|||
|**security information**|||||
|security information||Siemens provides products and solutions with industrial cybersecurity functions<br>that support the secure operation of plants, systems, machines and networks.<br>In order to protect plants, systems, machines and networks against cyber<br>threats, it is necessary to implement - and continuously maintain - a holistic,<br>state-of-the-art industrial cybersecurity concept. Siemens’ products and<br>solutions constitute one element of such a concept. Customers are responsible<br>for preventing unauthorized access to their plants, systems, machines and<br>networks. Such systems, machines and components should only be connected<br>to an enterprise network or the internet if and to the extent such a connection is<br>necessary and only when appropriate security measures (e.g. firewalls and/or<br>network segmentation) are in place. For additional information on industrial<br>cybersecurity measures that may be implemented, please visit<br>www.siemens.com/cybersecurity-industry. Siemens’ products and solutions<br>undergo continuous development to make them more secure. Siemens strongly<br>recommends that product updates are applied as soon as they are available<br>and that the latest product versions are used. Use of product versions that are<br>no longer supported, and failure to apply the latest updates may increase<br>customer’s exposure to cyber threats. To stay informed about product updates,<br>subscribe to the Siemens Industrial Cybersecurity RSS Feed under<br>https://www.siemens.com/cert.(V4.7)|||
|**Classifications**|||||
||||**Version**|**Classification**|
|||eClass<br>eClass<br>eClass<br>eClass<br>eClass<br>eClass|14<br>12<br>9.1<br>9<br>8<br>7.1|27-04-07-01<br>27-04-07-01<br>27-04-07-01<br>27-04-07-01<br>27-04-90-02<br>27-04-90-02|



|● duringtransport|● duringtransport|-40 ... +85 °C|-40 ... +85 °C|-40 ... +85 °C|
|---|---|---|---|---|
|● duringstorage||-40 ... +85 °C|||
|installation altitude at height above sea level maximum||5 000 m|||
|ambient condition relating to ambient temperature - air pressure<br>- installation altitude||In case of operation at altitudes of 2000 - 5000 m above sea level: Output<br>power derating of -7.5 %/1000 m or reduction of the ambient temperature by 5<br>K/1000 m|||
|type of coating for electronic devices in railway applications<br>accordingto EN 50155||Yes; Protective coating of Class PC2 acc. to EN 50155:2017|||
|**connection method**|||||
|type of electrical connection||screw terminal|||
|● at input||Input, output and ground: 1 screw terminal each for 0.2 ... 2.5 mm² single-<br>core/finelystranded|||
|● at output||+, -: 2 screw terminals each for 0.2 ... 2.5 mm²|||
|● for auxiliarycontacts||13, 14(alarm signal): 1 screw terminal each for 0.05 ... 2.5 mm²|||
|**mechanical data**|||||
|width × height × depth of the enclosure||42 × 125 × 125 mm|||
|installation width × mountingheight||42 mm × 225 mm|||
|required spacing|||||
|● top||50 mm|||
|● bottom||50 mm|||
|● left||0 mm|||
|● right||0 mm|||
|fasteningmethod||Snaps onto DIN rail EN 60715 35x7.5/15|||
|● DIN-rail mounting||Yes|||
|● S7 rail mounting||No|||
|● wall mounting||No|||
|housingcan be lined up||Yes|||
|net weight||0.6 kg|||
|**further information internet links**|||||
|internet link|||||
|● to website: IndustryMall||https://mall.industry.siemens.com|||
|● to website: IndustryOnline Support||https://support.industry.siemens.com|||
|**additional information**|||||
|other information||Specifications at rated input voltage and ambient temperature +25 °C (unless<br>otherwise specified)|||
|**security information**|||||
|security information||Siemens provides products and solutions with industrial cybersecurity functions<br>that support the secure operation of plants, systems, machines and networks.<br>In order to protect plants, systems, machines and networks against cyber<br>threats, it is necessary to implement - and continuously maintain - a holistic,<br>state-of-the-art industrial cybersecurity concept. Siemens’ products and<br>solutions constitute one element of such a concept. Customers are responsible<br>for preventing unauthorized access to their plants, systems, machines and<br>networks. Such systems, machines and components should only be connected<br>to an enterprise network or the internet if and to the extent such a connection is<br>necessary and only when appropriate security measures (e.g. firewalls and/or<br>network segmentation) are in place. For additional information on industrial<br>cybersecurity measures that may be implemented, please visit<br>www.siemens.com/cybersecurity-industry. Siemens’ products and solutions<br>undergo continuous development to make them more secure. Siemens strongly<br>recommends that product updates are applied as soon as they are available<br>and that the latest product versions are used. Use of product versions that are<br>no longer supported, and failure to apply the latest updates may increase<br>customer’s exposure to cyber threats. To stay informed about product updates,<br>subscribe to the Siemens Industrial Cybersecurity RSS Feed under<br>https://www.siemens.com/cert.(V4.7)|||
|**Classifications**|||||
||||**Version**|**Classification**|
|||eClass<br>eClass<br>eClass<br>eClass<br>eClass<br>eClass|14<br>12<br>9.1<br>9<br>8<br>7.1|27-04-07-01<br>27-04-07-01<br>27-04-07-01<br>27-04-07-01<br>27-04-90-02<br>27-04-90-02|



|||**Version**|**Classification**||
|---|---|---|---|---|
||eClass|14|27-04-07-01||
||eClass|12|27-04-07-01||
||eClass|9.1|27-04-07-01||
||eClass|9|27-04-07-01||
||eClass|8|27-04-90-02||
||eClass|7.1|27-04-90-02||



6AG23330SB004AY0 Page 3/4 

Subject to change without notice © Copyright Siemens 

5/19/2026 

|eClass|6|27-04-90-02|
|---|---|---|
|ETIM|10|EC002540|
|ETIM|9|EC002540|
|ETIM|8|EC002540|
|ETIM|7|EC002540|
|IDEA|4|4130|
|UNSPSC|15|39-12-10-04|



~~a~~ **Approvals Certificates General Product Approval** Manufacturer DeclaraChina RoHS tion ~~—~~ ce EAL ~~_~~ ce UK **Railway** Confirmation 

**last modified:** 

5/5/2026 

6AG23330SB004AY0 Page 4/4 

Subject to change without notice © Copyright Siemens 

5/19/2026