6AG1972-0BA12-2XA0

**6AG1972-0BA12-2XA0** 

**Data sheet** 

|**product type designation**|**PROFIBUS connector**|
|---|---|
|product description|PROFIBUS bus connector, RS 485, screw, without programming port, 90°|
||SIPLUS DP PROFIBUS plug with R - without PG - 90 degrees based on 6ES7972-|
||0BA12-0XA0 with conformal coating, -25…+70 °C, connection plug for PROFIBUS|
||up to 12 Mbps, 90° cable outlet, terminating resistor with isolating function, without|
||PG socket|



|**product type designation**|**PROFIBUS connector**|
|---|---|
|product description|PROFIBUS bus connector, RS 485, screw, without programming port, 90°|
|ot|SIPLUS DP PROFIBUS plug with R - without PG - 90 degrees based on 6ES7972-<br>0BA12-0XA0 with conformal coating, -25…+70 °C, connection plug for PROFIBUS<br>up to 12 Mbps, 90° cable outlet, terminating resistor with isolating function, without<br>PG socket|
|product brand name|SIPLUS|
|Technical Product Detail Page|https://i.siemens.com/1P6AG1972-0BA12-2XA0|
|suitabilityfor use|for connectingPROFIBUS stations to the PROFIBUS bus cable|
|**transfer rate**<br>~~ees~~||
|transfer rate / with PROFIBUS DP<br>~~ees~~|9.6 kbit/s ... 12 Mbit/s<br>~~ees~~|
|**interfaces**<br>~~ees~~||
|number of electrical connections<br>~~ees~~|~~ees~~|
|● for PROFIBUS cables|2|
|● for network components or terminal equipment|1|
|type of electrical connection||
|● for PROFIBUS cables|Screw|
|● for network components or terminal equipment|9-pin sub D connector|
|**mechanical data**<br>~~ees~~||
|design of terminatingresistor<br>~~ees~~|Resistor combination integrated and connectable via slide switch<br>~~ees~~|
|material / of the enclosure|plastic|
|lockingmechanism design|Screwedjoint|
|**design, dimensions and weights**<br>~~ees~~||
|type of cable outlet<br>~~ees~~|90 degree cable outlet<br>~~ees~~|
|width|15.8 mm|
|height|64 mm|
|depth|35.6 mm|
|net weight|10g|
|**ambient conditions**<br>~~eee~~||
|ambient temperature<br>~~eee~~|~~eee~~|
|● duringoperation|-40 ... +70 °C|
|● duringstorage|-40 ... +70 °C|
|● duringtransport|-40 ... +70 °C|
|● in horizontal mounting position / duringoperation|70 ... -40 °C|
|● duringstorage and transport|70 ... -40 °C|
|installation altitude / at height above sea level / maximum|5000 m|
|ambient condition / relating to ambient temperature - air<br>pressure - installation altitude|Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax<br>- 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K)<br>at 658 hPa ... 540 hPa(+3 500 m ... +5 000 m)|
|relative humidity||
|● with condensation / maximum|100 %; RH incl. condensation/frost permitted (no commissioning in bedewed<br>state)|
|● with condensation / according to IEC 60068-2-38 /<br>maximum|100 %; RH incl. condensation / frost (no commissioning in bedewed state),<br>horizontal installation|



6AG19720BA122XA0 Page 1/3 

Subject to change without notice © Copyright Siemens 

5/29/2026 

|resistance to biologicallyactive substances||
|---|---|
|● conformity according to EN 60721-3-3|Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna);<br>Class 3B3 on request|
|● conformity according to EN 60721-3-6|Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on<br>request|
|resistance to chemicallyactive substances||
|● conformity according to EN 60721-3-3|Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity<br>degree 3); *|
|● conformity according to EN 60721-3-6|Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity<br>degree 3); *|
|resistance to mechanicallyactive substances||
|● conformityaccordingto EN 60721-3-3|Yes; Class 3S4 incl. sand, dust, *|
|● conformityaccordingto EN 60721-3-6|Yes; Class 6S3 incl. sand, dust; *|
|environmental category / according to IEC 60721 / note|* The supplied plug covers must remain in place over the unused interfaces<br>duringoperation!|
|coating / for equipped printed circuit board / according to EN<br>61086|Yes; Class 2 for high reliability|
|type of coating||
|●protection againstpollution accordingto EN 60664-3|Yes; Type 1protection|
|● for electronic devices in railway applications according to<br>EN 50155|Yes; protective coating of the Class PC2 according to EN 50155:2020|
|type of test / of the coating/ accordingto MIL-I-46058C|Yes; Discoloration of coating possible duringservice life|
|product conformity / of the coating / Qualification and<br>Performance of Electrical Insulating Compound for Printed<br>Board Assemblies accordingto IPC-CC-830A|Yes; Conformal coating, Class A|
|protection class IP|IP20|
|**product features, product functions, product components / general**||
|product feature||
|● silicon-free|Yes|
|product component||
|● PG connection socket|No|
|● strain relief|Yes|
|**standards, specifications, approvals**||
|certificate of suitability||
|● RoHS conformity|Yes|
|resistance to air pollution / conformity according to ANSI/ISA-<br>71.04|Yes; Level GX group A/B (excluding trichlorethylene; harmful gas<br>concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level<br>LC3(salt spray)and level LB3(oil)|
|**further information / internet links**||
|internet link||
|● to website: Selectionguide for cables and connectors|https://support.industry.siemens.com/cs/ww/en/view/109766358|
|● to webpage: selection aid TIA Selection Tool|https://www.siemens.com/tstcloud|
|● to website: Industrial communication|https://www.siemens.com/simatic-net|
|● to webpage: SiePortal|https://sieportal.siemens.com|
|● to website: Image database|https://www.automation.siemens.com/bilddb|
|● to website: CAx-Download-Manager|https://www.siemens.com/cax|
|● to website: IndustryOnline Support|https://support.industry.siemens.com|
|**security information**||
|security information|Siemens provides products and solutions with industrial cybersecurity functions<br>that support the secure operation of plants, systems, machines and networks.<br>In order to protect plants, systems, machines and networks against cyber<br>threats, it is necessary to implement - and continuously maintain - a holistic,<br>state-of-the-art industrial cybersecurity concept. Siemens’ products and<br>solutions constitute one element of such a concept. Customers are responsible<br>for preventing unauthorized access to their plants, systems, machines and<br>networks. Such systems, machines and components should only be connected<br>to an enterprise network or the internet if and to the extent such a connection is<br>necessary and only when appropriate security measures (e.g. firewalls and/or<br>network segmentation) are in place. For additional information on industrial<br>cybersecurity measures that may be implemented, please visit<br>www.siemens.com/cybersecurity-industry. Siemens’ products and solutions<br>undergo continuous development to make them more secure. Siemens strongly<br>recommends that product updates are applied as soon as they are available<br>and that the latest product versions are used. Use of product versions that are<br>no longer supported, and failure to apply the latest updates may increase<br>customer’s exposure to cyber threats. To stay informed about product updates,<br>subscribe to the Siemens Industrial Cybersecurity RSS Feed under|



6AG19720BA122XA0 Page 2/3 

Subject to change without notice © Copyright Siemens 

5/29/2026 

https://www.siemens.com/cert. (V4.7) ~~eee~~ **Approvals / Certificates General Product Approval** Manufacturer DeclaraChina RoHS tion «&) cé ~~———~~ UKUK ~~—~~ @ **For use in hazardGeneral Product Approval EMV ous locations** HE ~~=~~ China RoHS KE **For use in hazardous locations** CCC-Ex €) _ **last modified:** 3/10/2026 

6AG19720BA122XA0 Page 3/3 

Subject to change without notice © Copyright Siemens 

5/29/2026