6AG1960-1AA06-7XA0

**6AG1960-1AA06-7XA0** 

**Data sheet** 

SIPLUS S7-400 sync module near based on 6ES7960-1AA06-0XA0 with conformal coating, -25…+70 °C, synchronization module V6 for patch cable up to 10 m 

||SIPLUS S7-400 sync module near based on 6ES7960-1AA06-0XA0 with conformal<br>coating, -25…+70 °C, synchronization module V6 for patch cable up to 10 m|
|---|---|
|**General information**<br>~~I~~||
|based on<br>~~I~~<br>~~Se~~|6ES7960-1AA06-0XA0<br>~~I~~<br>~~Se~~|
|**Input current**<br>~~Se~~||
|Current consumption, max.<br>~~Se~~|220 mA<br>~~Se~~|
|**Power loss**<br>~~ee~~||
|Power loss, typ.<br>~~ee~~|0.77 W<br>~~ee~~|
|**Ambient conditions**<br>~~ee~~||
|Ambient temperature duringoperation<br>~~ee~~||
|● min.|-25 °C; = Tmin|
|● max.<br>~~ee~~|70 °C; = Tmax;@60°C for UL/ATEX/FM use<br>~~ee~~|
|Altitude duringoperation relatingto sea level<br>~~ee~~||
|● Installation altitude above sea level, max.|5 000 m|
|● Ambient air temperature-barometric pressure-altitude<br>~~a~~|Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax<br>- 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K)<br>at 658 hPa ... 540 hPa(+3 500 m ... +5 000 m)<br>~~a~~|
|Relative humidity<br>~~a~~||
|● With condensation, tested in accordance with IEC 60068-<br>2-38, max.<br>~~a~~|100 %; RH incl. condensation/frost (no commissioning under condensation<br>conditions)<br>~~a~~|
|Resistance<br>~~a~~||
|Use in stationaryindustrial systems||
|— to biologically active substances according to EN<br>60721-3-3|Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna);<br>Class 3B3 on request|
|— to chemically active substances according to EN<br>60721-3-3|Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity<br>degree 3); *|
|— to mechanically active substances according to EN<br>60721-3-3|Yes; Class 3S4 incl. sand, dust, *|
|Use on ships/at sea||
|— to biologically active substances according to EN<br>60721-3-6|Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on<br>request|
|— to chemically active substances according to EN<br>60721-3-6|Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity<br>degree 3); *|
|— to mechanically active substances according to EN<br>60721-3-6|Yes; Class 6S3 incl. sand, dust; *|
|Usage in industrialprocess technology||
|— Against chemically active substances acc. to EN<br>60654-4|Yes; Class 3 (excluding trichlorethylene)|
|— Environmental conditions for process, measuring<br>and control systems acc. to ANSI/ISA-71.04|Yes; Level GX group A/B (excluding trichlorethylene; harmful gas<br>concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level<br>LC3(salt spray)and level LB3(oil)|
|Remark||
|— Note regarding classification of environmental<br>conditions acc. to EN 60721, EN 60654-4 and<br>ANSI/ISA-71.04|* The supplied plug covers must remain in place over the unused interfaces<br>during operation!|



6AG19601AA067XA0 Page 1/2 

Subject to change without notice © Copyright Siemens 

5/19/2026 

~~a~~ Conformal coating ● Coatings for printed circuit board assemblies acc. to EN Yes; Class 2 for high reliability 61086 ● Protection against fouling acc. to EN 60664-3 Yes; Type 1 protection ● Military testing according to MIL-I-46058C, Amendment 7 Yes; Discoloration of coating possible during service life ● Qualification and Performance of Electrical Insulating Yes; Conformal coating, Class A Compound for Printed Board Assemblies according to IPCCC-830A ~~a~~ **Dimensions** Width 13 mm ~~CO~~ Height 14 mm Depth 58 mm **Weights** Weight, approx. 14 g ~~a~~ **Classifications** 

||**Version**|**Classification**|
|---|---|---|
|eClass|14|27-24-22-08|
|eClass|12|27-24-22-08|
|eClass|9.1|27-24-22-08|
|eClass|9|27-24-22-08|
|eClass|8|27-24-22-08|
|eClass|7.1|27-24-22-08|
|eClass|6|27-24-22-08|
|ETIM|10|EC001423|
|ETIM|9|EC001423|
|ETIM|8|EC001423|
|ETIM|7|EC001423|
|IDEA|4|3564|
|UNSPSC|15|32-15-17-05|



~~a~~ **Approvals / Certificates General Product Approval** Manufacturer DeclaraChina RoHS China RoHS ~~—~~ tion Ce eS E ~~L~~ **General Product ApEMV For use in hazardous locations proval** UK ~~—~~ CCC-Ex 

**last modified:** 

5/29/2024 

6AG19601AA067XA0 Page 2/2 

Subject to change without notice © Copyright Siemens 

5/19/2026