Image not available
Illustrative purposes only
6AG1900-0AB10-7AA0
Data Storage Medium, Removable, 256 Mbyte, IP20, SIPLUS Series
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: SIEMENS
- Product type:
- SVHC: To Be Advised
| Delivery and price | |
|---|---|
| Units per pack | 1 |
| Price | 239.25 € |
| Current stock | 10+ |
| Lead time | 30 days |
**6AG1900-0AB10-7AA0** **Data sheet** SIPLUS C-Plug based on 6GK1900-0AB10 with conformal coating, -40…+75 °C, removable data storage medium for simple device replacement in case of fault, for recording configuration or engineering and application data, can be used in the following SIMATIC NET products with C-Plug slot: SCALANCE XC-200, XP-200, XM-400, XR-500, M-800 S615 and W-700 |SEMEN?<br>6Gk7090-008"|SIPLUS C-Plug based on 6GK1900-0AB10 with conformal coating, -40…+75 °C,<br>removable data storage medium for simple device replacement in case of fault, for<br>recording configuration or engineering and application data, can be used in the<br>following SIMATIC NET products with C-Plug slot: SCALANCE XC-200, XP-200,<br>XM-400, XR-500, M-800 S615 and W-700| |---|---| |**General information**|| |Product type designation|C-Plug| |based on|6GK1900-0AB10| |**Memory**<br>~~|~~|| |Total memorycapacity<br>~~|~~|256 Mbyte<br>~~|~~| |**Degree and class of protection**<br>~~|~~|| |IP degree of protection<br>~~|~~|IP20<br>~~|~~| |**Ambient conditions**|| |Ambient temperature duringoperation|| |● min.|-40 °C; = Tmin(incl. condensation/frost)| |● max.<br>~~a~~|75 °C; = Tmax<br>~~a~~| |Altitude duringoperation relatingto sea level<br>~~a~~|| |● Installation altitude above sea level, max.|5 000 m| |● Ambient air temperature-barometric pressure-altitude<br>~~i~~|Tmin ... Tmax at 1 080 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax<br>- 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax - 20 K)<br>at 658 hPa ... 540 hPa(+3 500 m ... +5 000 m)<br>~~i~~<br>~~___~~| |Relative humidity<br>~~i~~<br>~~___~~|| |● Operation, max.|100 %; RH incl. condensation/frost permitted (no commissioning in bedewed<br>state)<br>~~___~~| |● With condensation, tested in accordance with IEC 60068-<br>2-38, max.<br>~~a~~|100 %; RH incl. condensation/frost permitted (no commissioning in bedewed<br>state)<br>~~a~~| |Resistance<br>~~a~~|| |Coolants and lubricants|| |— Resistant to commercially available coolants and<br>lubricants|Yes; Incl. diesel and oil droplets in the air| |Use in stationaryindustrial systems|| |— to biologically active substances according to EN<br>60721-3-3|Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna);<br>Class 3B3 on request| |— to chemically active substances according to EN<br>60721-3-3|Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity<br>degree 3); *| |— to mechanically active substances according to EN<br>60721-3-3|Yes; Class 3S4 incl. sand, dust, *| |Use on ships/at sea|| |— to biologically active substances according to EN<br>60721-3-6|Yes; Class 6B2 mold, fungal and dry rot spores (excluding fauna)| |— to chemically active substances according to EN<br>60721-3-6|Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity<br>degree 3); *| |— to mechanically active substances according to EN<br>60721-3-6|Yes; Class 6S3 incl. sand, dust; *| |Remark|| |— Note regarding classification of environmental|* The supplied plug covers must remain in place over the unused interfaces| 6AG19000AB107AA0 Page 1/2 Subject to change without notice © Copyright Siemens 5/22/2026 conditions acc. to EN 60721, EN 60654-4 and during operation! ANSI/ISA-71.04 ~~rr~~ Conformal coating ● Coatings for printed circuit board assemblies acc. to EN Yes; Class 2 for high reliability 61086 ● Protection against fouling acc. to EN 60664-3 Yes; Type 1 protection ● Electronic equipment on rolling stock acc. to EN 50155 Yes; Class PC2 protective coating acc. to EN 50155:2017 ● Military testing according to MIL-I-46058C, Amendment 7 Yes; Discoloration of coating possible during service life ● Qualification and Performance of Electrical Insulating Yes; Conformal coating, Class A Compound for Printed Board Assemblies according to IPCCC-830A **Dimensions** ~~a~~ Width 24.3 mm ~~CO~~ Height 17 mm Depth 8.1 mm **Weights** Weight, approx. 0.5 g ~~a~~ **Classifications** ||**Version**|**Classification**| |---|---|---| |eClass|14|27-24-22-12| |eClass|12|27-24-22-12| |eClass|9.1|27-24-22-12| |eClass|9|27-24-22-12| |eClass|8|27-24-22-12| |eClass|7.1|27-24-22-12| |eClass|6|27-24-22-12| |ETIM|10|EC000192| |ETIM|9|EC000192| |ETIM|8|EC000192| |ETIM|7|EC000192| |IDEA|4|6458| |UNSPSC|15|43-20-14-02| ~~a~~ **Approvals / Certificates General Product Approval** Manufacturer DeclaraChina RoHS China RoHS tion ~~~—~~ UR c ~~e~~ ERE **General Product Approval EMV** Cc UKeg @ **last modified:** 5/29/2024 6AG19000AB107AA0 Page 2/2 Subject to change without notice © Copyright Siemens 5/22/2026
Updated at March 31, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →