6AG1732-0AA00-7AA0

**6AG1732-0AA00-7AA0** 

**Data sheet** 

SIPLUS PS DC/DC 24 V/2 A 

*** spare part *** SIPLUS PS DC/DC 24V/2A based on 6EP1732-0AA00 with conformal coating, 0...+70 °C, SITOP Power 2 A, DC/DC stabilized power supply input: 48/60/110 V DC output: 24 V DC/2 A 

## **General information** 

|SIPLUS PS DC/DC 24 V/2 A<br>*** spare part *** SIPLUS PS DC/DC 24V/2A based on 6EP1732-0AA00 with<br>conformal coating, 0...+70 °C, SITOP Power 2 A, DC/DC stabilized power supply<br>input: 48/60/110 V DC output: 24 V DC/2 A<br>**General information**<br>manufacturer's article number of the basic version used for<br>SIPLUS product versions<br>6EP1732-0AA00<br>**input**<br>type of thepower supplynetwork<br>DC voltage<br>supplyvoltage at DC<br>48 ... 110 V<br>input voltage at DC<br>38 ... 121 V<br>wide range input<br>Yes<br>overvoltage overload capability<br>-<br>buffering time for rated value of the output current in the event of<br>power failure minimum<br>5 ms<br>operatingcondition of the mains buffering<br>at Vin = 48 V<br>input current<br>● at rated input voltage 48 V<br>1.2 A<br>● at rated input voltage 110 V<br>0.5 A<br>current limitation of inrush current at 25 °C maximum<br>33 A<br>fuseprotection type<br>T 2.5 A(not accessible)<br>fuse protection type in the feeder<br>Recommended miniature circuit breaker: 10 to 25 A characteristic B or 6 to 25<br>A characteristic C, suitable for DC<br>**output**<br>voltage curve at output<br>Controlled, isolated DC voltage<br>output voltage at DC rated value<br>24 V<br>output voltage<br>● at output 1 at DC rated value<br>24 V<br>output voltage adjustable<br>Yes; viapotentiometer<br>adjustable output voltage<br>23.5 ... 26.5 V<br>relative overall tolerance of the voltage<br>1 %<br>relative controlprecision of the output voltage<br>● on slow fluctuation of input voltage<br>0.1 %<br>● on slow fluctuation of ohm loading<br>0.4 %<br>residual ripple<br>● maximum<br>100 mV<br>voltagepeak<br>● maximum<br>300 mV<br>displayversion for normal operation<br>Green LED for 24 V OK<br>behavior of the output voltage when switchingon<br>Overshoot of Vout on startupmax. 25 V<br>response delaymaximum<br>3 s<br>voltage increase time of the output voltage<br>● typical<br>30 ms<br>a<br>SIEMENg=<br>SITOP<br>Peiwas<br>bests<br>YY<br>ivy<br>"<br>Figure similar|SIPLUS PS DC/DC 24 V/2 A<br>*** spare part *** SIPLUS PS DC/DC 24V/2A based on 6EP1732-0AA00 with<br>conformal coating, 0...+70 °C, SITOP Power 2 A, DC/DC stabilized power supply<br>input: 48/60/110 V DC output: 24 V DC/2 A||
|---|---|---|
||Controlled, isolated DC voltage||
||24 V||
||||
||24 V||
||Yes; viapotentiometer||
||23.5 ... 26.5 V||
||1 %||
||||
||0.1 %||
||0.4 %||
||||
||100 mV||
||||
||300 mV||
||Green LED for 24 V OK||
||Overshoot of Vout on startupmax. 25 V||
||3 s||
||||
||30 ms||



6AG17320AA007AA0 Page 1/4 

Subject to change without notice © Copyright Siemens 

5/19/2026 

|output current||
|---|---|
|● rated value|2 A|
|● rated range|0 ... 2 A|
|supplied activepower typical|48 W|
|bridgingof equipment|Yes|
|number of parallel-switched equipment resources for increasing<br>the power|2|
|**efficiency**||
|efficiencyinpercent|84 %|
|power loss[W]||
|● at rated output voltage for rated value of the output<br>current typical|9 W|
|**closed-loop control**||
|relative control precision of the output voltage with rapid<br>fluctuation of the input voltage by+/- 15% typical|0.3 %|
|relative control precision of the output voltage load step of<br>resistive load 50/100/50 % typical|0.8 %|
|settingtime||
|● load step50 to 100% typical|2.5 ms|
|● load step 100 to 50% typical|2.5 ms|
|**protection and monitoring**||
|design of the overvoltageprotection|Yes, suppressor diode at output|
|propertyof the output short-circuitproof|Yes|
|design of short-circuitprotection|Electronic shutdown, automatic restart|
|response value current limitation|2.1 ... 3 A|
|enduringshort circuit current RMS value||
|● maximum|2 A|
|**safety**||
|galvanic isolation between input and output|Yes|
|galvanic isolation|Safetyextra low output voltage Vout accordingto EN 60950-1|
|operatingresourceprotection class|Class I|
|leakage current||
|● maximum|3.5 mA|
|● typical|0.7 mA|
|protection class IP|IP20|
|**EMC**||
|standard||
|● for emitted interference|EN 55022 Class B|
|● for mains harmonics limitation|not applicable|
|● for interference immunity|EN 61000-6-2|
|**standards, specifications, approvals**||
|certificate of suitability||
|● CE marking|Yes|
|MTBF at 40 °C|1 580 078 h|
|**ambient conditions**||
|ambient temperature||
|● in horizontal mounting position duringoperation|0 ... 70 °C; with natural convection|
|● duringtransport|-40 ... +85 °C|
|● duringstorage|-40 ... +85 °C|
|installation altitude at height above sea level maximum|6 000 m|
|ambient condition relating to ambient temperature - air pressure<br>- installation altitude|In case of operation at altitudes of 2000 - 6000 m above sea level: Output<br>power derating of -7.5 %/1000 m or reduction of the ambient temperature by 5<br>K/1000 m|
|relative humidity with condensation according to IEC 60068-2-<br>38 maximum|100 %; RH incl. condensation/frost (no commissioning if condensation is<br>present), horizontal installation|
|chemical resistance to commerciallyavailable coolinglubricants|Yes; incl. diesel and oil droplets in the air|
|resistance to biologically active substances conformity<br>accordingto EN 60721-3-3|Yes; Class 3B2 mold, fungal, sponge spores (except fauna); class 3B3 upon<br>request|
|resistance to chemically active substances conformity according<br>to EN 60721-3-3|Yes; Class 3C4 (RH < 75%) incl. salt spray acc. to EN 60068-2-52 (severity<br>level 3)|
|resistance to mechanically active substances conformity|Yes; Class 3S4 incl. sand, dust|



6AG17320AA007AA0 Page 2/4 

Subject to change without notice © Copyright Siemens 

5/19/2026 

|accordingto EN 60721-3-3||||
|---|---|---|---|
|resistance to biologically active substances conformity<br>accordingto EN 60721-3-6|Yes; Class 6B2 mold, fungal, sponge spores (except fauna)|||
|resistance to chemically active substances conformity according<br>to EN 60721-3-6|Yes; Class 6C3 (RH < 75%) incl. salt spray acc. to EN 60068-2-52 (severity<br>level 3)|||
|resistance to mechanically active substances conformity<br>accordingto EN 60721-3-6|Yes; Class 6S3 incl. sand, dust|||
|coating for equipped printed circuit board according to EN<br>61086|Yes; Class 2 for high availability|||
|type of coating protection against pollution according to EN<br>60664-3|Yes; Type 1 protection|||
|type of test of the coatingaccordingto MIL-I-46058C|Yes; Discoloration of the coatingduringservice lifepossible|||
|product conformity of the coating Qualification and Performance<br>of Electrical Insulating Compound for Printed Board Assemblies<br>accordingto IPC-CC-830A|Yes; Conformal Coating, Class A|||
|**connection method**||||
|type of electrical connection|screw terminal|||
|● at input|L+, M1, PE: 1 screw terminal each for 2 x 0.5 ... 2.5/1.5 mm² single-core/finely<br>stranded|||
|● at output|L+, M: 1 screw terminal each for 2 x 0.5 ... 2.5 mm²|||
|● for auxiliarycontacts|-|||
|**mechanical data**||||
|width × height × depth of the enclosure|80 × 135 × 120 mm|||
|installation width × mountingheight|80 mm × 235 mm|||
|required spacing||||
|● top|50 mm|||
|● bottom|50 mm|||
|● left|0 mm|||
|● right|0 mm|||
|fasteningmethod|Snaps onto DIN rail EN 60715 35x15|||
|● DIN-rail mounting|Yes|||
|● S7 rail mounting|No|||
|● wall mounting|No|||
|housingcan be lined up|Yes|||
|net weight|0.5 kg|||
|**further information internet links**||||
|internet link||||
|● to website: IndustryOnline Support|https://support.industry.siemens.com|||
|**additional information**||||
|other information|Specifications at rated input voltage and ambient temperature +25 °C (unless<br>otherwise specified)|||
|**security information**||||
|security information|Siemens provides products and solutions with industrial cybersecurity functions<br>that support the secure operation of plants, systems, machines and networks.<br>In order to protect plants, systems, machines and networks against cyber<br>threats, it is necessary to implement - and continuously maintain - a holistic,<br>state-of-the-art industrial cybersecurity concept. Siemens’ products and<br>solutions constitute one element of such a concept. Customers are responsible<br>for preventing unauthorized access to their plants, systems, machines and<br>networks. Such systems, machines and components should only be connected<br>to an enterprise network or the internet if and to the extent such a connection is<br>necessary and only when appropriate security measures (e.g. firewalls and/or<br>network segmentation) are in place. For additional information on industrial<br>cybersecurity measures that may be implemented, please visit<br>www.siemens.com/cybersecurity-industry. Siemens’ products and solutions<br>undergo continuous development to make them more secure. Siemens strongly<br>recommends that product updates are applied as soon as they are available<br>and that the latest product versions are used. Use of product versions that are<br>no longer supported, and failure to apply the latest updates may increase<br>customer’s exposure to cyber threats. To stay informed about product updates,<br>subscribe to the Siemens Industrial Cybersecurity RSS Feed under<br>https://www.siemens.com/cert.(V4.7)|||
|**Classifications**||||
|||**Version**|**Classification**|
||eClass|14|27-04-07-01|



6AG17320AA007AA0 Page 3/4 

Subject to change without notice © Copyright Siemens 

5/19/2026 

**==> picture [218 x 168] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||
|---|---|---|
|eClass|12|27-04-07-01|
|eClass|9.1|27-04-07-01|
|eClass|9|27-04-07-01|
|eClass|8|27-04-90-02|
|eClass|7.1|27-04-90-02|
|eClass|6|27-04-90-02|
|ETIM|10|EC002540|
|ETIM|9|EC002540|
|ETIM|8|EC002540|
|ETIM|7|EC002540|
|IDEA|4|4130|
|UNSPSC|15|39-12-10-04|

**----- End of picture text -----**<br>


**==> picture [148 x 70] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||
|---|---|
|Approvals Certificates|
|General Product Approval|
|Manufacturer Declara-|China RoHS|
|tion|
|ee|

**----- End of picture text -----**<br>


**last modified:** 

5/5/2026 

6AG17320AA007AA0 Page 4/4 

Subject to change without notice © Copyright Siemens 

5/19/2026