6AG1155-5AA00-2AC0

**6AG1155-5AA00-2AC0** 

**Data sheet** 

***spare part*** SIPLUS ET 200MP IM155-5 PN HF based on 6ES7155-5AA000AC0 with conformal coating, -40…+60 °C, PROFINET IO device interface module for ET 200MP electronic modules; up to 12 IO modules without PS; up to 30 IO modules with additional PS; integrated 2-port switch; RJ45 shared device; MRP; IRT >=0.25 ms; isochronous mode FW update; IM0...3; prioritized run-up S2 redundancy; shared device 

|***spare part*** SIPLUS ET 200MP IM155-5 PN HF based on 6ES7155-5AA00-<br>0AC0 with conformal coating, -40…+60 °C, PROFINET IO device interface module<br>for ET 200MP electronic modules; up to 12 IO modules without PS; up to 30 IO<br>modules with additional PS; integrated 2-port switch; RJ45 shared device; MRP;<br>IRT >=0.25 ms; isochronous mode FW update; IM0...3; prioritized run-up S2<br>redundancy; shared device<br>**General information**<br>Product type designation<br>IM 155-5 PN HF<br>HW functional status<br>E01<br>Firmware version<br>V1.0.0<br>Vendor identification(VendorID)<br>0x002A<br>Device identifier(DeviceID)<br>0X0312<br>based on<br>6ES7155-5AA00-0AC0<br>Product function<br>● I&M data<br>Yes; I&M0 to I&M3<br>● Isochronous mode<br>Yes<br>Engineeringwith<br>● STEP 7 TIA Portal configurable/integrated from version<br>see entryID: 109746275<br>**Supply voltage**<br>Rated value(DC)<br>24 V<br>permissible range, lower limit(DC)<br>19.2 V<br>permissible range, upper limit(DC)<br>28.8 V<br>Reversepolarity protection<br>Yes<br>Short-circuitprotection<br>Yes<br>Mains buffering<br>● Mains/voltage failure stored energytime<br>20 ms<br>**Input current**<br>Current consumption(rated value)<br>0.2 A<br>**Power**<br>Infeedpower to the backplane bus<br>14 W<br>Power consumption from the backplane bus<br>2.3 W<br>**Power loss**<br>Power loss, typ.<br>4.5 W<br>**Address area**<br>Address spaceper module<br>● Address space per module, max.<br>256 byte; per input / output<br>**Hardware configuration**<br>Systempower supplycan beplugged in to left of IM<br>Yes<br>Number ofpermissiblepower segments<br>3<br>Rack<br>● Modules per rack, max.<br>30; I/O modules<br>**Interfaces**<br>Number of PROFINET interfaces<br>1<br>**1. Interface**<br>Interface types<br>~~|~~<br>~~ee~~<br>~~I~~<br>~~___~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~ee~~<br>~~|~~|***spare part*** SIPLUS ET 200MP IM155-5 PN HF based on 6ES7155-5AA00-<br>0AC0 with conformal coating, -40…+60 °C, PROFINET IO device interface module<br>for ET 200MP electronic modules; up to 12 IO modules without PS; up to 30 IO<br>modules with additional PS; integrated 2-port switch; RJ45 shared device; MRP;<br>IRT >=0.25 ms; isochronous mode FW update; IM0...3; prioritized run-up S2<br>redundancy; shared device||
|---|---|---|



6AG11555AA002AC0 Page 1/4 

Subject to change without notice © Copyright Siemens 

5/19/2026 

|● RJ 45(Ethernet)|Yes|
|---|---|
|● Number ofports|2|
|● integrated switch|Yes|
|Protocols||
|● PROFINET IO Device|Yes|
|● Media redundancy|Yes|
|PROFINET IO Device||
|Services||
|— IRT|Yes|
|— Prioritized startup|Yes|
|— Shared device|Yes|
|— Number of IO Controllers with shared device, max.|4|
|**Interface types**||
|RJ 45(Ethernet)||
|● Transmissionprocedure|PROFINET with 100 Mbit/s full duplex(100BASE-TX)|
|● 100 Mbps|Yes|
|● Autonegotiation|Yes|
|● Autocrossing|Yes|
|**Protocols**||
|Supportsprotocol for PROFINET IO|Yes|
|PROFIsafe|No|
|PROFIBUS|No|
|EtherNet/IP|No|
|Redundancymode||
|● PROFINET system redundancy (S2)|Yes|
|Media redundancy||
|— MRP|Yes|
|— MRPD|Yes|
|Open IE communication||
|● TCP/IP|Yes|
|● SNMP|Yes|
|● LLDP|Yes|
|**Isochronous mode**||
|Equidistance|Yes|
|shortest clockpulse|125µs|
|max. cycle|4 ms|
|**Interrupts/diagnostics/status information**||
|Status indicator|Yes|
|Alarms|Yes|
|Diagnostics function|Yes|
|Diagnostics indication LED||
|● RUN LED|Yes;green LED|
|● ERROR LED|Yes; red LED|
|● MAINT LED|Yes; Yellow LED|
|● Connection displayLINK TX/RX|Yes; Yellow LED|
|**Potential separation**||
|between backplane bus and electronics|No|
|between PROFINET and all other circuits|Yes|
|between supplyand all other circuits|No|
|**Permissible potential difference**||
|between different circuits|75 V DC/60 V AC(base isolation)|
|**Isolation**||
|Isolation tested with|707 V DC(type test)|
|**Standards, approvals, certificates**||
|Network loadingclass|3|
|**Ambient conditions**||
|Ambient temperature duringoperation||
|● horizontal installation, min.|-40 °C; = Tmin (incl. condensation/frost); start-up @ -25 °C|



6AG11555AA002AC0 Page 2/4 

Subject to change without notice © Copyright Siemens 

5/19/2026 

|● horizontal installation, max.|60 °C; = Tmax|60 °C; = Tmax|60 °C; = Tmax|
|---|---|---|---|
|Altitude duringoperation relatingto sea level||||
|● Installation altitude above sea level, max.|5 000 m|||
|● Ambient air temperature-barometric pressure-altitude|Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax<br>- 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K)<br>at 658 hPa ... 540 hPa(+3 500 m ... +5 000 m)|||
|Relative humidity||||
|● With condensation, tested in accordance with IEC 60068-<br>2-38, max.|100 %; RH incl. condensation/frost (no commissioning under condensation<br>conditions)|||
|Resistance||||
|Coolants and lubricants||||
|— Resistant to commercially available coolants and<br>lubricants|Yes; Incl. diesel and oil droplets in the air|||
|Use in stationaryindustrial systems||||
|— to biologically active substances according to EN<br>60721-3-3|Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna);<br>Class 3B3 on request|||
|— to chemically active substances according to EN<br>60721-3-3|Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity<br>degree 3); *|||
|— to mechanically active substances according to EN<br>60721-3-3|Yes; Class 3S4 incl. sand, dust, *|||
|Use on ships/at sea||||
|— to biologically active substances according to EN<br>60721-3-6|Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on<br>request|||
|— to chemically active substances according to EN<br>60721-3-6|Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity<br>degree 3); *|||
|— to mechanically active substances according to EN<br>60721-3-6|Yes; Class 6S3 incl. sand, dust; *|||
|Usage in industrialprocess technology||||
|— Against chemically active substances acc. to EN<br>60654-4|Yes; Class 3 (excluding trichlorethylene)|||
|— Environmental conditions for process, measuring<br>and control systems acc. to ANSI/ISA-71.04|Yes; Level GX group A/B (excluding trichlorethylene; harmful gas<br>concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level<br>LC3(salt spray)and level LB3(oil)|||
|Remark||||
|— Note regarding classification of environmental<br>conditions acc. to EN 60721, EN 60654-4 and<br>ANSI/ISA-71.04|* The supplied plug covers must remain in place over the unused interfaces<br>during operation!|||
|Conformal coating||||
|● Coatings for printed circuit board assemblies acc. to EN<br>61086|Yes; Class 2 for high reliability|||
|● Protection against foulingacc. to EN 60664-3|Yes; Type 1protection|||
|● Militarytestingaccordingto MIL-I-46058C, Amendment 7|Yes; Discoloration of coating possible duringservice life|||
|● Qualification and Performance of Electrical Insulating<br>Compound for Printed Board Assemblies according to IPC-<br>CC-830A|Yes; Conformal coating, Class A|||
|**Dimensions**||||
|Width|35 mm|||
|Height|155 mm|||
|Depth|120 mm|||
|**Weights**||||
|Weight, approx.|350g|||
|**Classifications**||||
|||**Version**|**Classification**|
||eClass<br>eClass<br>eClass<br>eClass<br>eClass<br>eClass<br>eClass<br>ETIM<br>ETIM|14<br>12<br>9.1<br>9<br>8<br>7.1<br>6<br>10<br>9|27-24-26-08<br>27-24-26-08<br>27-24-26-08<br>27-24-26-08<br>27-24-26-08<br>27-24-26-08<br>27-24-26-08<br>EC001604<br>EC001604|



6AG11555AA002AC0 Page 3/4 

Subject to change without notice © Copyright Siemens 

5/19/2026 

ETIM 8 EC001604 ETIM 7 EC001604 IDEA 4 3564 UNSPSC 15 32-15-17-05 **Approvals / Certificates** ~~a~~ **General Product Approval** China RoHS Manufacturer Declaration ce ~~es~~ © FAL **General Product Approval EMV For use in hazardous locations** CCC-Ex 

**Maritime application** 

**last modified:** 

10/23/2025 

6AG11555AA002AC0 Page 4/4 

Subject to change without notice © Copyright Siemens 

5/19/2026