6AG1136-6PA00-2BC0

**6AG1136-6PA00-2BC0** 

**Data sheet** 

SIPLUS ET 200SP F-PM-E 24VDC/8A PPM based on 6ES7136-6PA00-0BC0 with conformal coating, -30…+60 °C, fail-safe power module PROFIsafe, 24 V DC safe shutdown of DQ and F-DQ up to PL D/SIL2 or PL E/SIL3 2 safe digital inputs 1 safe digital output PPM 

|SIPLUS ET 200SP F-PM-E 24VDC/8A PPM based on 6ES7136-6PA00-0BC0 with<br>conformal coating, -30…+60 °C, fail-safe power module PROFIsafe, 24 V DC safe<br>shutdown of DQ and F-DQ up to PL D/SIL2 or PL E/SIL3 2 safe digital inputs 1<br>safe digital output PPM<br>**General information**<br>Product type designation<br>F-PM-E 24 V DC/8 A PPM ST<br>based on<br>6ES7136-6PA00-0BC0<br>usable BaseUnits<br>BU type C0<br>Color code for module-specific color-coded label<br>CC52<br>Product function<br>● I&M data<br>Yes; I&M0 to I&M3<br>Engineeringwith<br>● STEP 7 TIA Portal configurable/integrated from version<br>see entryID: 109746275<br>**Supply voltage**<br>Rated value(DC)<br>24 V<br>permissible range, lower limit(DC)<br>20.4 V<br>permissible range, upper limit(DC)<br>28.8 V<br>Reverse polarityprotection<br>Yes<br>**Input current**<br>Current consumption(rated value)<br>75 mA; without load<br>Current consumption, max.<br>21 mA; From the backplane bus<br>**Output voltage**<br>Rated value(DC)<br>24 V<br>**Encoder supply**<br>Number of outputs<br>2<br>Short-circuitprotection<br>Yes; Electronic(response threshold 0.7 A to 2.1 A)<br>Output current<br>● upto 60 °C, max.<br>0.3 A<br>24 V encoder supply<br>● 24 V<br>Yes; min. L+(-1.5 V)<br>● Short-circuitprotection<br>Yes<br>● Output current, max.<br>600 mA; Total current of all encoders<br>**Power**<br>Power consumption from the backplane bus<br>70 mW<br>**Power loss**<br>Power loss, typ.<br>5 W<br>**Address area**<br>Address spaceper module<br>● Inputs<br>7 byte<br>● Outputs<br>5 byte<br>**Hardware configuration**<br>Automatic encoding<br>Yes<br>● Electronic codingelement type F<br>Yes<br>~~|~~<br>~~a~~<br>~~ee~~<br>~~|~~<br>~~Oe~~<br>~~|~~<br>~~|~~<br>~~ee~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~——=E=~~<br>~~|~~|SIPLUS ET 200SP F-PM-E 24VDC/8A PPM based on 6ES7136-6PA00-0BC0 with<br>conformal coating, -30…+60 °C, fail-safe power module PROFIsafe, 24 V DC safe<br>shutdown of DQ and F-DQ up to PL D/SIL2 or PL E/SIL3 2 safe digital inputs 1<br>safe digital output PPM||
|---|---|---|
||Yes<br>~~|~~||
||Yes||



|**Digital inputs**|**Digital inputs**|
|---|---|
|Number of digital inputs|2|
|Sourcing/sinkinginput|Yes; P-reading|
|Input characteristic curve in accordance with IEC 61131, type 1|Yes|
|Input voltage||
|● Type of input voltage|DC|
|● Rated value(DC)|24 V|
|● for signal "0"|-30 to +5 V|
|● for signal "1"|+15 to +30 V|
|Input current||
|● for signal "1", typ.|3.7 mA|
|Input delay (for rated value of input voltage)||
|for standard inputs||
|—parameterizable|Yes|
|— at "0" to "1", min.|0.4 ms|
|— at "0" to "1", max.|20 ms|
|— at "1" to "0", min.|0.4 ms|
|— at "1" to "0", max.|20 ms|
|for technological functions||
|—parameterizable|No|
|Cable length||
|● shielded, max.|1 000 m|
|● unshielded, max.|500 m|
|**Digital outputs**||
|Number of digital outputs|1|
|Digital outputs,parameterizable|Yes|
|Short-circuitprotection|Yes|
|● Response threshold, typ.|> 14.8 A|
|Open-circuit detection|Yes|
|● Response threshold, typ.|8 mA|
|Overloadprotection|Yes|
|● Response threshold, typ.|8.8 A|
|Limitation of inductive shutdown voltage to|max. 1.5 V|
|Switchingcapacityof the outputs||
|● with resistive load, max.|8 A|
|● on lampload, max.|100 W|
|Load resistance range||
|● lower limit|3 Ω|
|● upper limit|2 000 Ω|
|Output voltage||
|● for signal "1", min.|24 V; L+(-0.5 V)|
|Output current||
|● for signal "1" rated value|8 A|
|● for signal "0" residual current, max.|1.5 mA; PP-switching: max. 1.5 mA; PM-switching: max. 1 mA|
|Switchingfrequency||
|● with resistive load, max.|10 Hz; Symmetrical|
|● with inductive load, max.|0.1 Hz; accordingto IEC 60947-5-1, DC-13, symmetrical|
|● on lampload, max.|4 Hz; Symmetrical|
|Total current of the outputs||
|● Currentper channel, max.|8 A; note deratingdata in the manual|
|● Currentper module, max.|8 A; note deratingdata in the manual|
|Total current of the outputs(per module)||
|horizontal installation||
|— upto 40 °C, max.|8 A; note deratingdata in the manual|
|— upto 50 °C, max.|6 A; note deratingdata in the manual|
|— upto 60 °C, max.|4 A; note deratingdata in the manual|
|— up to 70 °C, max.|4 A; note derating information in the manual; only with configured slots to the<br>left and right of the module|
|Cable length||



6AG11366PA002BC0 Page 2/5 

Subject to change without notice © Copyright Siemens 

5/21/2026 

|● shielded, max.|1 000 m|
|---|---|
|● unshielded, max.|500 m|
|**Interrupts/diagnostics/status information**||
|Diagnostics function|Yes; See Chapter "Alarms/diagnostic messages" in the manual|
|Substitute values connectable|No|
|Alarms||
|● Diagnostic alarm|Yes|
|● Hardware interrupt|No|
|Diagnostics indication LED||
|● RUN LED|Yes;green LED|
|● ERROR LED|Yes; red LED|
|● Monitoringof the supplyvoltage(PWR-LED)|Yes;green PWR LED|
|● Channel status display|Yes;green LED|
|● for channel diagnostics|Yes; red LED|
|● for module diagnostics|Yes;green/red DIAG LED|
|**Potential separation**||
|Potential separation channels||
|● between the channels|No|
|● between the channels and backplane bus|Yes|
|● between the channels and the power supply of the<br>electronics|No|
|**Isolation**||
|Isolation tested with|707 V DC(type test)|
|**Standards, approvals, certificates**||
|Suitable for safetyfunctions|Yes|
|Ecological footprint||
|● environmentalproduct declaration|Yes|
|Global warming potential||
|—global warming potential,(total) [CO2 eq]|88.3 kg|
|— global warming potential, (during production) [CO2<br>eq]|13.1 kg|
|— global warming potential, (during operation) [CO2<br>eq]|76.6 kg|
|— global warming potential, (after end of life cycle)<br>[CO2 eq]|-1.37 kg|
|Highest safetyclass achievable in safetymode||
|● Performance level accordingto ISO 13849-1|PLe|
|● SIL acc. to IEC 61508|SIL 3|
|Probabilityof failure(for service life of 20years and repair time of 100 hours)||
|— Low demand mode: PFDavg in accordance with<br>SIL2|< 2.00E-04|
|— Low demand mode: PFDavg in accordance with<br>SIL3|< 2.00E-05|
|— High demand/continuous mode: PFH in accordance<br>with SIL2|< 1.00E-08 1/h|
|— High demand/continuous mode: PFH in accordance<br>with SIL3|< 1.00E-09 1/h|
|**Ambient conditions**||
|Ambient temperature duringoperation||
|● horizontal installation, min.|-30 °C; = Tmin(incl. condensation/frost)|
|● horizontal installation, max.|60 °C; = Tmax; +70 °C with spacing modules (6AG1193-6BN00-7BA0) or<br>configured slots to the left and right of the module|
|● vertical installation, min.|-30 °C; = Tmin|
|● vertical installation, max.|50 °C; = Tmax|
|Altitude duringoperation relatingto sea level||
|● Installation altitude above sea level, max.|4 000 m; restrictions for installation altitudes > 2 000 m, see ET 200SP system<br>manual|
|Relative humidity||
|● With condensation, tested in accordance with IEC 60068-<br>2-38, max.|100 %; RH incl. condensation / frost (no commissioning in bedewed state),<br>horizontal installation|
|Resistance||
|Coolants and lubricants||



6AG11366PA002BC0 Page 3/5 

Subject to change without notice © Copyright Siemens 

5/21/2026 

|— Resistant to commercially available coolants and<br>lubricants|— Resistant to commercially available coolants and<br>lubricants|Yes; Incl. diesel and oil droplets in the air|Yes; Incl. diesel and oil droplets in the air|Yes; Incl. diesel and oil droplets in the air|
|---|---|---|---|---|
|Use in stationaryindustrial systems|||||
|— to biologically active substances according to EN<br>60721-3-3||Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna);<br>Class 3B3 on request|||
|— to chemically active substances according to EN<br>60721-3-3||Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity<br>degree 3); *|||
|— to mechanically active substances according to EN<br>60721-3-3||Yes; Class 3S4 incl. sand, dust, *|||
|— Against mechanical environmental conditions acc.<br>to EN 60721-3-3||Yes; Class 3M8 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-<br>0AA0)|||
|Use on ships/at sea|||||
|— to biologically active substances according to EN<br>60721-3-6||Yes; Class 6B2 mold, fungal and dry rot spores (excluding fauna)|||
|— to chemically active substances according to EN<br>60721-3-6||Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity<br>degree 3); *|||
|— to mechanically active substances according to EN<br>60721-3-6||Yes; Class 6S3 incl. sand, dust; *|||
|— Against mechanical environmental conditions acc.<br>to EN 60721-3-6||Yes; Class 6M4 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-<br>0AA0)|||
|Usage in industrialprocess technology|||||
|— Against chemically active substances acc. to EN<br>60654-4||Yes; Class 3 (excluding trichlorethylene)|||
|— Environmental conditions for process, measuring<br>and control systems acc. to ANSI/ISA-71.04||Yes; Level GX group A/B (excluding trichlorethylene; harmful gas<br>concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level<br>LC3(salt spray)and level LB3(oil)|||
|Remark|||||
|— Note regarding classification of environmental<br>conditions acc. to EN 60721, EN 60654-4 and<br>ANSI/ISA-71.04||* The supplied plug covers must remain in place over the unused interfaces<br>during operation!|||
|Conformal coating|||||
|● Coatings for printed circuit board assemblies acc. to EN<br>61086||Yes; Class 2 for high reliability|||
|● Protection against foulingacc. to EN 60664-3||Yes; Type 1protection|||
|● Militarytestingaccordingto MIL-I-46058C, Amendment 7||Yes; Discoloration of coating possible duringservice life|||
|● Qualification and Performance of Electrical Insulating<br>Compound for Printed Board Assemblies according to IPC-<br>CC-830A||Yes; Conformal coating, Class A|||
|**Dimensions**|||||
|Width||20 mm|||
|Height||72 mm|||
|Depth||55 mm|||
|**Weights**|||||
|Weight, approx.||70g|||
|**Classifications**|||||
||||**Version**|**Classification**|
|||eClass<br>eClass<br>eClass<br>eClass<br>eClass<br>eClass<br>eClass<br>ETIM<br>ETIM<br>ETIM<br>ETIM<br>IDEA<br>UNSPSC|14<br>12<br>9.1<br>9<br>8<br>7.1<br>6<br>10<br>9<br>8<br>7<br>4<br>15|27-24-26-11<br>27-24-26-11<br>27-24-26-11<br>27-24-26-11<br>27-24-26-11<br>27-24-26-11<br>27-24-26-11<br>EC002583<br>EC002583<br>EC002583<br>EC002583<br>3575<br>32-15-17-06|
|**Approvals / Certificates**|||||
|**General Product Approval**|||||



|||**Version**|**Classification**||
|---|---|---|---|---|
||eClass|14|27-24-26-11||
||eClass|12|27-24-26-11||
||eClass|9.1|27-24-26-11||
||eClass|9|27-24-26-11||
||eClass|8|27-24-26-11||
||eClass|7.1|27-24-26-11||
||eClass|6|27-24-26-11||
||ETIM|10|EC002583||
||ETIM|9|EC002583||
||ETIM|8|EC002583||
||ETIM|7|EC002583||
||IDEA|4|3575||
||UNSPSC|15|32-15-17-06||



**Approvals / Certificates General Product Approval** 

6AG11366PA002BC0 Page 4/5 

Subject to change without notice © Copyright Siemens 

5/21/2026 

|Manufacturer Declara-<br>tion<br>~~—~~|C©C|UK<br>GA||China RoHS<br>~~—~~|TUEV<br>~~—~~|®|
|---|---|---|---|---|---|---|
|**General Product Approval**|||||**EMV**|**For use in hazard-**<br>**ous locations**|
|HE|China RoHS|«||E§&|&B|®|
|**For use in hazardous locations**||**Functional Saftey**|||**Maritime application**||
||CCC-Ex|TUEV||TUEV|||
||~~ei~~||||||
|**Maritime application**|||||||
|**last modified:**|||5/6/2026|;|||



6AG11366PA002BC0 Page 5/5 

Subject to change without notice © Copyright Siemens 

5/21/2026