65-00-GEL30-0010

**THERM-A-GAP[™] Gels** Dispensable, Very Low Compression Force, Thermal Gap Fillers 

THERM-A-GAP[™] Gels are highly conformable, pre-cured, single-component compounds. The cross-linked gel structure provides superior long term thermal stability and reliable performance. 

## **FEATURES / BENEFITS** 

- Dispensable 

- Fully cured 

- Highly conformable at low pressures 

- No refrigeration, mixing or filler settling issues in storage 

- Single dispensable TIM can eliminate multiple pad part sizes/numbers 

- Reworkable 

## **TYPICAL APPLICATIONS** 

## **PERFORMANCE GUIDE** 

- Automotive electronic control units (ECUs) 

**==> picture [490 x 288] intentionally omitted <==**

**----- Start of picture text -----**<br>
8.0<br>units (ECUs)<br>Gel 75<br>- Engine control  =<br>- Transmission control  7.0<br>- Braking/traction control<br>•  Power conversion equipment<br>6.0<br>•  Power supplies and uninterruptible<br>power supplies<br>•  Power semiconductors 5.0 TC 50<br>•  MOSFET arrays with common   Gel 45<br>heat sinks<br>4.0 ~~ Ce<br>•  Televisions and consumer  Gel 37<br>Gel 30<br>electronics ap as<br>3.0 Gel 8010<br>Gel 25NS<br>T636<br>2.0<br>T635<br>1.0<br>T630<br>Be<br>a =<br>Consult Applications Engineering for automated<br>dispensing equipment recommendations. 10                    20                    30                    40                    50                    60<br>Flow Rate (grams/min)<br> (W/m-K)<br>Thermal Conductivity<br>**----- End of picture text -----**<br>


**Phone +1 781-935-4850  www.parker.com/chomerics** 

1 

## **THERM-A-GAP[™] Thermally Conductive Gels** 

**==> picture [490 x 313] intentionally omitted <==**

**----- Start of picture text -----**<br>
Typical Properties [†] T630 T635 T636 Test Method<br>Color White White Yellow Visual<br>Binder Silicone Silicone Silicone --<br>Flow Rate, grams/min - 30 cc taper tip, 0.130" orifice*, 90 psi (621 kPa) 10* 8 8 Chomerics<br>Specific Gravity 2.0 1.5 1.2 ASTM D792<br>Typical Minimum Bondline Thickness, in (mm) 0.004 (0.10) 0.015 (0.38) 0.015 (0.38) --<br>Thermal Conductivity, W/m-K 0.7 1.7 2.4 ASTM D5470<br>Heat Capacity, J/g-K 1.1 0.9 0.9 ASTM E1269<br>Coefficient of Thermal Expansion, ppm/K 350 400 400 ASTM E831<br>-67 to 392 -67 to 392 -67 to 392 --<br>Operating Temperature Range, °F (°C) (-55 to 200) (-55 to 200) (-55 to 200)<br>Dielectric Strength, Vac/mil (kVac/mm) 200 (8) 200 (8) 200 (8) ASTM D149<br>Volume Resistivity, ohm-cm 10 [14] 10 [14] 10 [14] ASTM D257<br>Dielectric Constant @ 1,000 kHz 5.5 4.0 4.0 ASTM D150<br>Dissipation Factor @ 1,000 kHz 0.010 0.003 0.003 Chomerics<br>Flammability Rating (See UL File E140244 for details) V-0 Not Tested V-0 UL 94<br>Chomerics<br>RoHS Compliant Yes Yes Yes Certification<br>Outgassing, % TML (% CVCM) 0.55 (0.14) Not Tested 0.49 (0.18) ASTM E595<br>Shelf Life, months from date of manufacture 18 18 18 Chomerics<br>50 to 90  50 to 90  50 to 90<br>Storage Conditions, °F (°C) @ 50% Relative Humidity (10 to 32) (10 to 32) (10 to 32) Chomerics<br>Physical<br>Thermal<br>Electrical<br>ulatory<br>g<br>Re<br>**----- End of picture text -----**<br>


† Typical properties: these are not to be construed as specifications.     * THERM-A-GAP T630 flow rate is measured in a 0.100" orifice. 

## **COMPRESSION DEFLECTION** 

**==> picture [430 x 200] intentionally omitted <==**

**----- Start of picture text -----**<br>
7<br>T630<br>6<br>5<br>Gel 75<br>4<br>3<br>Gel 37<br>2<br>1<br>0<br>0                       10                      20                      30                       40                      50                      60                      70                      80<br>Strain (%)<br>Test method:<br>• ASTM C165 Modified<br> (psi)<br>Force<br>**----- End of picture text -----**<br>


- Dispensed material and brought 0.50” diameter probe down to 0.100” height 

- Strain rate 0.025 in/min 

**Phone +1 781-935-4850  www.parker.com/chomerics** 

2 

## **THERM-A-GAP[™] Thermally Conductive Gels** 

**==> picture [507 x 329] intentionally omitted <==**

**----- Start of picture text -----**<br>
Typical Properties [†] GEL 25NS GEL 8010 GEL 30 GEL 37 Test Method<br>Color Yellow White Pink Blue Visual<br>Binder Urethane Silicone Silicone Silicone --<br>Flow Rate, grams/min - 30 cc syringe with no  tip attachment, 0.100” orifice, 90 psi (621 kPa) 15 60 20 30 Chomerics<br>Specific Gravity 2.6 2.7 3.1 3.1 ASTM D792<br>Typical Minimum Bondline Thickness, in (mm) 0.004 (0.11) 0.002 (0.05) 0.004 (0.10) 0.004 (0.10) Chomerics<br>Thermal Conductivity, W/m-K 2.5 3.0 3.5 3.7 ASTM D5470<br>Heat Capacity, J/g-K 0.96 1 1 1 ASTM E1269<br>Coefficient of Thermal Expansion, ppm/K < 300 150 150 150 ASTM E831<br>-58 to 257 -67 to 392 -67 to 392 -67 to 392<br>Operating Temperature Range, °F (°C) (-50 to 125) (-55 to 200) (-55 to 200) (-55 to 200) Chomerics<br>Dielectric Strength, Vac/mil (kVac/mm) 200 (8) 200 (8) 200 (8) 180 (7.0) ASTM D149<br>Volume Resistivity, ohm-cm 10 [14] 10 [14] 10 [14] 10 [14] ASTM D257<br>Dielectric Constant @ 1000 kHz 6.7 6.3 7.0 5.9 ASTM D150<br>Dissipation Factor @ 1000 kHz 0.018 0.002 0.002 0.012 Chomerics<br>Flammability Rating  V-0 V-0 V-0 V-0 UL 94<br>Chomerics<br>RoHS Compliant Yes Yes Yes Yes Certification<br>Outgassing, % TML (% CVCM) 0.23 (0.04) 1.33 (0.34) 0.15 (0.05) 0.18 (0.07) ASTM E595<br>Shelf Life, months from date of manufacture 12 18 18 18 Chomerics<br>Storage Conditions, °F (°C) @ 50%  Relative Humidity (10 to 32)50 to 90  (10 to 32)50 to 90  (10 to 32)50 to 90  (10 to 32)50 to 90  Chomerics<br>Physical<br>Thermal<br>Electrical<br>Regulatory<br>**----- End of picture text -----**<br>


† Typical properties: these are not to be construed as specifications. 

**Phone +1 781-935-4850  www.parker.com/chomerics** 

3 

## **THERM-A-GAP[™] Thermally Conductive Gels** 

**==> picture [441 x 329] intentionally omitted <==**

**----- Start of picture text -----**<br>
Typical Properties [†] GEL 45 TC50 GEL 75 Test Method<br>Color Black Gray White Visual<br>Binder Silicone Silicone Silicone --<br>Flow Rate, grams/min - 30 cc syringe with no  tip attachment, 0.100” orifice, 90 psi (621 kPa) 55 10 30 Chomerics<br>Specific Gravity 3.1 3.25 3.4 ASTM D792<br>Typical Minimum Bondline Thickness, in (mm) 0.0035 (0.0889) 0.006 (0.15) 0.008 (0.20) Chomerics<br>Thermal Conductivity, W/m-K 4.5 5.0 7.5 ASTM D5470<br>Heat Capacity, J/g-K 1 1 1 ASTM E1269<br>Coefficient of Thermal Expansion, ppm/K 150 150 150 ASTM E831<br>-67 to 392 -67 to 392 -67 to 392<br>Operating Temperature Range, °F (°C) (-55 to 200) (-55 to 200) (-55 to 200) Chomerics<br>Dielectric Strength, Vac/mil (kVac/mm) 200 (8) 200 (8) 220 (8.7) ASTM D149<br>Volume Resistivity, ohm-cm 10 [14] 10 [14] 10 [14] ASTM D257<br>Dielectric Constant @ 1000 kHz 7.0 6.8 7.2 ASTM D150<br>Dissipation Factor @ 1000 kHz 0.002 0.022 0.023 Chomerics<br>Flammability Rating  V-0 V-0 V-0 UL 94<br>Chomerics<br>RoHS Compliant Yes Yes Yes Certification<br>Outgassing, % TML (% CVCM) 0.15 (0.05) 0.07 (0.01) 0.18 (0.05) ASTM E595<br>Shelf Life, months from date of manufacture 18 18 9 Chomerics<br>Storage Conditions, °F (°C) @ 50%  Relative Humidity (10 to 32)50 to 90  (10 to 32)50 to 90  (10 to 32)50 to 90  Chomerics<br>Physical<br>Thermal<br>Electrical<br>Regulatory<br>**----- End of picture text -----**<br>


† Typical properties: these are not to be construed as specifications. 

**Phone +1 781-935-4850  www.parker.com/chomerics** 

4 

Ordering Information 

## **THERM-A-GAP[™] Thermally Conductive Gels** 

These materials are available in the following formats. 

> **PA R T  N U M B E R : 65 XX YYYYY ZZZZ Cartridge Type Material Type Vessel Size** 00 T630 0010 = 10 cc Luer-Lok[™] Syringe T635 0300 = 300 cc Aluminum Cartridge (Caulking Style) T636 01 = Semco Cartridge GEL25NS 0180 = 180 cc GEL8010 0240 = 240 cc GEL30 0600 = 600 cc GEL37 0960 = 960 cc GEL45 02 = Nordson EFD TC50 0030 = 30 cc GEL75 0180 = 180 cc 1P = 1 U.S. Gallon 2500 = 1 U.S. Gal. Pail 5P = 5 U.S. Gallon XXXX = 5 U.S. Gal. Pail (XXXX = Fill Volume. dependent on material, ~25 kg) 

**Ordering Information: Custom Configurations** 

Larger custom cartridges and pails available. Please contact Parker Chomerics for a pre-assigned part number for custom part sizes. 

**==> picture [410 x 149] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dispensing Equipment Options Optional Supplier Description<br>Hand-Gun Pneumatic Dispensing 300 cc cartridges Bergdahl Associates SEMCO [®]  Model 550<br>Hand-Gun Pneumatic Dispensing 180 cc (6 oz) cartridges  Bergdahl Associates Model 250A-6 oz Sealant Gun<br>www.bergdahl.com<br>Ultra 2400 Series<br>Pneumatic Shot Size Controllers<br>30 cc, 180 cc and 300 cc shot size dispensing equipment EFD Ultra 1400 Series<br>Ultra 870 Series<br>30 cc/55 cc Adapter Assembly EFD 10000D5152<br>Dispensing Sleeve to support 6 oz (180 cc) SEMCO [®]  tubes EFD 5192-6<br>www.efd-inc.com<br>**----- End of picture text -----**<br>


SEMCO is a registered trademark of PPG Aerospace 

**Phone +1 781-935-4850  www.parker.com/chomerics** 

5