60.13.9.012.0040

**60 SЕRIES** 

General purpose relays 6 - 10 A 

Shipyards 

Hoists and cranes Road / tunnel lighting Burners, boilers and furnaces Wood-processing machines Panels for electrical distribution Control panels Control systems 

FINDER reserves the right to alter characteristics at any time without notice. FINDER assumes no liability for damage to persons or property, caused as a result of the incorrect use or application of its products. 

**60 SERIES** 

**A** 

- **Plug-in mount 60.12 10 A General purpose relay Type 60.12 -** 2 pole, 10 A 

- **Type 60.13 -** 3 pole, 10 A 

- • 2 & 3 pole changeover contacts • Cadmium Free contacts (preferred version) • AC coils & DC coils WN) • UL Listing (certain relay/socket combinations) • Contact material options • 2 pole, 10 A • Lockable test button with mechanical flag • 8 pin plug-in indicator (preferred version) 

- • 90 series sockets • Coil EMC suppression • Timer accessories 86 series • European Patent 

**==> picture [96 x 139] intentionally omitted <==**

**----- Start of picture text -----**<br>
60.13<br>rai<br>• 3 pole, 10 A<br>• 11 pin plug-in<br>**----- End of picture text -----**<br>


_For UL ratings see: “General technical information” page_ V 

||For outline drawing see page 8|||
|---|---|---|---|
||**Contact specification**<br>Contact configuration||2 CO (DPDT)<br>3 CO (3PDT)|
||Rated current/Maximum peak current<br>A||10/20<br>10/20<br>~~es~~|
||Rated voltage/<br>Maximum switchingvoltage|V AC|250/400<br>250/400|
||Rated load AC1|VA|2500<br>2500<br>~~es~~|
||Rated load AC15 (230 V AC)|VA|500<br>500<br>~~es~~|
||Single phase motor rating (230 V AC)|Single phase motor rating (230 V AC)<br>kW|0.37<br>0.37<br>~~es~~|
||Breaking capacity DC1: 30/110/220 V<br>A||10/0.4/0.15<br>10/0.4/0.15<br>~~es~~|
||Minimum switching load|mW (V/mA)|500 (10/5)<br>500 (10/5)<br>~~es~~|
||Standard contact material<br>**Coil specification**||AgNi<br>AgNi|
||Nominal voltage (UN)|V AC (50/60 Hz)|6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240 - 400|
|||V DC|6 - 12 - 24 - 48 - 60 - 110 -125 - 220<br>~~|~~|
||Rated power AC/DC|VA (50 Hz)/W|2.2/1.3<br>2.2/1.3<br>~~ee~~|
||Operating range|AC|(0.8…1.1)UN<br>(0.8…1.1)UN<br>~~es~~|
|||DC|(0.8…1.1)UN<br>(0.8…1.1)UN<br>~~es~~|
||Holding voltage<br>Must drop-out voltage<br>**Technical data**|AC/DC<br>AC/DC|0.8 UN/ 0.5 UN<br>0.8 UN/ 0.5 UN<br>0.2 UN/ 0.1 UN<br>0.2 UN/ 0.1 UN<br>~~es~~|
||Mechanical life AC/DC|cycles|20 · 106/ 50 · 106<br>20 · 106/ 50 · 106|
||Electrical life at rated load AC1|cycles|200 · 103<br>200 · 103<br>~~es~~|
||Operate/release time|ms|11/4<br>11/4<br>~~es~~|
||Insulation between coil|||
|I-2018，www.findernet.com|and contacts(1.2/50μs)<br>Dielectric strength<br>between open contacts<br>Ambient temperature range<br>Environmental protection<br>**Approvals**(according to type)|kV<br>V AC<br>°C|4<br>3.6<br>1000<br>1000<br>–40…+70<br>–40…+70<br>RT I<br>RT I<br>~~es~~<br>~~ee~~<br>~~CE @ GEA@~~<br>~~RINA cAXus~~|



**3** 

**60 SERIES** 

## **Plug-in mount - 6 A** 

**==> picture [55 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
60.12 - 52xx<br>**----- End of picture text -----**<br>


## **60.13 - 52xx** 

## **Bifurcated contacts for low level switching** 

## **Type 60.12 - 52xx** 

- **A -** 2 pole, 6 A 

## **Type  60.13 - 52xx** 

- 3 pole, 6 A 

- 2 & 3 pole changeover contacts 

- Cadmium Free contacts 

- (Gold plated Silver Nickel) 

- AC coils & DC coils 

- Lockable test button with mechanical flag indicator (preferred version) 

- 90 series sockets 

- 2 pole, 6 A 

- Bifurcated contacts with AgNi + Au 

- 8 pin plug-in 

   - 3 pole, 6 A 

   - Bifurcated contacts with AgNi + Au 

   - 11 pin plug-in 

- Coil EMC suppression 

- Timer accessories 86 series 

- European Patent 

## _For UL ratings see:_ 

_“General technical information” page_ V 

For outline drawing see page 8 

|For outline drawing see page 8||||
|---|---|---|---|
|**Contact specification**<br>Contact configuration||2 CO (DPDT)<br>3 CO (3PDT)||
|Rated current/Maximum peak current<br>A||6/10<br>6/10<br>~~es~~||
|Rated voltage/<br>Maximum switchingvoltage|V AC|250/400<br>250/400||
|Rated load AC1<br>VA<br>Rated load AC15 (230 V AC)<br>VA<br>Single phase motor rating (230 V AC)<br>kW<br>Breaking capacity DC1: 30/110/220 V<br>A||1500<br>1500<br>250<br>250<br>0.185<br>0.185<br>6/0.3/0.12<br>6/0.3/0.12<br>~~es~~<br>~~es~~<br>~~es~~<br>~~es~~||
|Minimum switching load|mW (V/mA)|50 (5/5)<br>50 (5/5)<br>~~es~~||
|Standard contact material<br>**Coil specification**||AgNi + Au<br>AgNi + Au||
|Nominal voltage (UN)|V AC (50/60 Hz)|6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240 - 400||
||V DC|6 - 12 - 24 - 48 - 60 - 110 -125 - 220<br>~~a~~||
|Rated power AC/DC|VA (50 Hz)/W|2.2/1.3<br>2.2/1.3<br>~~es~~||
|Operating range|AC|(0.8…1.1)UN<br>(0.8…1.1)UN<br>~~es~~||
||DC|(0.8…1.1)UN<br>(0.8…1.1)UN<br>~~es~~||
|Holding voltage|AC/DC|0.8 UN/ 0.5 UN<br>0.8 UN/ 0.5 UN||
|Must drop-out voltage<br>**Technical data**|AC/DC|0.2 UN/ 0.1 UN<br>0.2 UN/ 0.1 UN||
|Mechanical life AC/DC|cycles|20 · 106/ 50 · 106<br>20 · 106/ 50 · 106||
|Electrical life at rated load AC1|cycles|250 · 103<br>250 · 103<br>~~RQ~~||
|Operate/release time|ms|11/4<br>11/4<br>~~es~~||
|Insulation between coil||||
|and contacts(1.2/50μs)<br>Dielectric strength<br>between open contacts<br>Ambient temperature range<br>Environmental protection<br>**Approvals**(according to type)|kV<br>V AC<br>°C|4<br>3.6<br>1000<br>1000<br>–40…+70<br>–40…+70<br>RT I<br>RT I<br>~~es~~<br>~~es~~<br>~~CE © SEA©~~<br>~~RINA  cAXus~~|I-2018，www.findernet.com|



**4** 

**60 SERIES** 

**A** 

> **Flange mount - General purpose relay 10 A 60.62 60.63 Type 60.62 -** 2 pole, 10 A **Type 60.63 -** 3 pole, 10 A • Faston 187, (4.8 x 0.8 mm) • 2 & 3 pole changeover contacts • AC coils & DC coils • Cadmium Free contacts • Contacts material options • 2 pole, 10 A power contacts • 3 pole, 10 A power contacts • Flange mount • Flange mount • Faston 187 • Faston 187 

||_For ULratings see:_|||
|---|---|---|---|
||_“General technical information” page_V|||
||For outline drawing see page 8|||
||**Contact specification**<br>Contact configuration||2 CO (DPDT)<br>3 CO(3PDT)|
||Rated current/Maximum peak current<br>A<br>Rated voltage/<br>Maximum switchingvoltage<br>V AC||~~1~~0/20<br>10/20<br>250/400<br>250/400<br>~~|~~<br>~~ee~~|
||Rated load AC1|VA|2500<br>2500<br>~~es~~|
||Rated load AC15 (230 V AC)|VA|500<br>500<br>~~es~~|
||Single phase motor rating (230 V AC)|Single phase motor rating (230 V AC)<br>kW|0.37<br>0.37<br>~~es~~|
||Breaking capacity DC1: 30/110/220 V<br>A||10/0.4/0.15<br>10/0.4/0.15|
||Minimum switching load|mW (V/mA)|500 (10/5)<br>500 (10/5)<br>~~es~~|
||Standard contact material<br>**Coil specification**||AgNi<br>AgNi|
||Nominal voltage (UN)|V AC (50/60 Hz)|6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240 - 400|
|||V DC|6 - 12 - 24 - 48 - 60 - 110 -125 - 220|
||Rated power AC/DC<br>Operating range|VA (50 Hz)/W<br>AC|2.2/1.3<br>2.2/1.3<br>(0.8…1.1)UN<br>(0.8…1.1)UN<br>~~es~~<br>~~es~~|
|||DC|(0.8…1.1)UN<br>(0.8…1.1)UN<br>~~es~~|
||Holding voltage|AC/DC|0.8 UN/ 0.5 UN<br>0.8 UN/ 0.5 UN<br>~~es~~|
||Must drop-out voltage<br>**Technical data**|AC/DC|0.2 UN/ 0.1 UN<br>0.2 UN/ 0.1 UN|
||Mechanical life AC/DC|cycles|20 · 106/ 50 · 106<br>20 · 106/ 50 · 106|
||Electrical life at rated load AC1|cycles|200 · 103<br>200 · 103<br>~~es~~|
||Operate/release time|ms|11/4<br>11/4<br>~~es~~|
||Insulation between coil<br>and contacts(1.2/50μs)|kV|4<br>3.6<br>~~ee~~|
|I-2018，www.findernet.com|Dielectric strength<br>between open contacts<br>Ambient temperature range<br>Environmental protection<br>**Approvals**(according to type)|V AC<br>°C|1000<br>1000<br>–40…+70<br>–40…+70<br>RT I<br>RT I<br>Z<br>~~ee~~<br>~~es~~<br>~~Rs~~<br>CE @ SEA~~®~~<br>~~RINA. cAXus~~|



**5** 

**60 SERIES** 

**A** 

## **Ordering information** 

Example:  60 series plug-in relay, 3 CO (3PDT), 12 V DC coil, test button and mechanical indicator. 

## **A B C D 6 0 . 1 3 . 9 . 0 1 2 . 0 0 4 0** 

## **0** 

## **Series** 

## **Type** 

- 1 =  8/11 pin plug-in 

- 6 =  Faston 187 (4.8 x 0.8 mm) with flange mount 

## **No. of poles** 

2 = 2 pole 

- 3 = 3 pole 

## **Coil version** 

4 = Current sensing (60.12/13 only) 

- 8 = AC (50/60 Hz) 

- 9 = DC 

## **Coil voltage** 

See coil specifications 

## **A: Contact material** 

- 0 = Standard 

5 = AgNi + Au 

## **B: Contact circuit** 

- 0 = CO (nPDT) 

- 2 =  Bifurcated contacts 

   - 60.12/13 - 6 A only 

## **D: Special versions** 

- 0 = Standard 

## **C: Options** 

- 0 =  None 

- 2 =  Mechanical indicator 

- 3 =  LED (AC) 

- 4 =  Lockable test button + mechanical indicator 

- 5* =  Lockable test button + LED (AC) 

- 54* =  Lockable test button + LED (AC) + mechanical indicator 

- 6* =  LED + diode (DC, polarity positive to pin 2) 

- 7* =  Lockable test button + LED + diode 

   - (DC, polarity positive to pin 2) 

- 74* =  Lockable test button + LED + 

   - diode (DC, polarity positive to pin 2) + mechanical indicator 

- Options not available for 220 V DC and 400 V AC versions. 

|**Type**<br>~~aes~~|**Coil version**<br>~~es es~~|**A**<br>~~es~~|**B**|**C**|**D**|
|---|---|---|---|---|---|
|60.12/13<br>~~a es~~<br>~~es~~<br>~~es~~<br>~~aGe~~<br>~~rs~~<br>~~es~~<br>~~es~~<br>~~es~~<br>~~a~~|AC<br>~~es es~~<br>~~es~~|**0**<br>~~es~~<br>~~ee ee~~|**0**<br>~~ee~~|0 - 2 - 3 -**4**- 5|**0**|
||AC<br>~~es es~~<br>~~es~~<br>~~es~~|0<br>~~es~~<br>~~ee ee~~<br>~~ee ee~~|0<br>~~ee~~<br>~~ee ee~~|54|/|
||AC<br>~~es~~<br>~~es~~|5<br>~~ee ee~~<br>~~ee ee~~|0 - 2<br>~~ee~~<br>~~ee ee~~|0 - 2 - 3 - 4 - 5|0|
||AC<br>~~es~~<br>~~a~~|5<br>~~ee ee~~<br>|0 - 2<br>~~ee ee~~<br>|54<br>|/<br>|
||DC<br>~~aGe~~<br>~~rs~~|**0**<br>~~Ge~~<br>~~es~~|**0**<br>~~Ge~~<br>~~es~~|0 - 2 -**4**- 6 - 7<br>~~Ge~~<br>~~es~~|**0**<br>~~Ge~~<br>~~es~~|
||DC<br>~~Ge~~<br>~~rs~~<br>~~es es~~|0<br>~~Ge~~<br>~~es~~<br>~~es~~|0<br>~~Ge~~<br>~~es~~|74<br>~~Ge~~<br>~~es~~|/<br>~~Ge~~<br>~~es~~|
||DC<br>~~rs~~<br>~~es es~~<br>~~es ee~~|5<br>~~es~~<br>~~es~~<br>~~ee~~|0 - 2<br>~~es~~<br>~~ee~~|0 - 2 - 4 - 6 - 7<br>~~es~~<br>~~ee~~|0<br>~~es~~<br>~~ee~~|
||DC<br>~~es es~~<br>~~es ee~~<br>~~es~~|5<br>~~es~~<br>~~ee~~<br>~~es ee~~|0 - 2<br>~~ee~~<br>~~ee~~|74<br>~~ee~~|/<br>~~ee~~|
||current sensing<br>~~es ee~~<br>~~es~~|0<br>~~ee ~~<br>~~es ee~~|0<br> ~~ee~~<br>~~ee~~|4<br>~~ee~~|0<br>~~ee~~|
|60.62/63<br>~~es~~<br>~~a~~|AC-DC<br>~~es~~|**0**- 5<br>~~es ee~~|**0**<br>~~ee~~|**0**|**0**|



**Descriptions: Options and Special versions** 

**C: Option 3, 5, 54** LED (AC) 

**C: Option 6, 7, 74** LED + diode (DC, polarity positive to pin 2) 

**==> picture [136 x 81] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 3<br>FA LY Po<br>— ey | — ae<br>4 a Poe.<br>2<br>**----- End of picture text -----**<br>


**Lockable test button and mechanical flag indicator (0040, 0050, 0054, 0070, 0074)** 

The dual-purpose Finder test button can be used in two ways: 

Case 1) The plastic pip (located directly above the test button) remains intact. In this case, when the test button is pushed, the contacts operate. When the test button is released the contacts return to their former state. 

Case 2) The plastic pip is broken-off (using an appropriate cutting tool). In this case, (in addition to the above function), when the test button is pushed and rotated, the contacts are latched in the operating state, and remain so until the test button is rotated back to its former position. In both cases ensure that the test button actuation is swift and decisive. 

**6** 

**60 SERIES** 

## **Technical data** 

**==> picture [512 x 318] intentionally omitted <==**

**----- Start of picture text -----**<br>
Insulation according to EN 61810-1 2 pole 3 pole<br>Nominal voltage of supply system   V AC 230/400 230/400<br>Rated insulation voltage   V AC 250 400 250 400<br>Pollution degree 3 2 3 2<br>Insulation between coil and contact set<br>Type of insulation Basic Basic<br>Overvoltage category III III<br>Rated impulse voltage   kV (1.2/50 μs) 4 3.6<br>Dielectric strength   V AC 2000 2000<br>Insulation between adjacent contacts<br>Type of insulation Basic Basic<br>Overvoltage category III III<br>Rated impulse voltage   kV (1.2/50 μs) 4 3.6<br>Dielectric strength   V AC 2000 2000<br>Insulation between open contacts<br>Type of disconnection Micro-disconnection Micro-disconnection<br>Dielectric strength   V AC/kV (1.2/50 μs) 1000/1.5 1000/1.5<br>Insulation between coil terminals<br>Rated impulse voltage (surge) differential mode<br>(according to EN 61000-4-5)  kV(1.2/50 µs) 4<br>Other data<br>Bounce time: NO/NC   ms 1/4<br>Vibration resistance (5…55)Hz: NO/NC   g 22/22<br>Shock resistance   g 20<br>Power lost to the environment without contact current   W 1.3 1.3<br>with rated current   W 2.7 (60.12, 60.62) 3.4 (60.13, 60.63)<br>**----- End of picture text -----**<br>


**A** 

## **Contact specification** 

## **F 60 - Electrical life (AC) v contact current** 

**==> picture [216 x 109] intentionally omitted <==**

**----- Start of picture text -----**<br>
Resistive load - cosφ = 1<br>Inductive load - cosφ = 0.4<br>Cycles<br>**----- End of picture text -----**<br>


## **H 60 - Maximum DC1 breaking capacity** 

**==> picture [217 x 126] intentionally omitted <==**

**----- Start of picture text -----**<br>
contacts in series<br>DC voltage (V)<br>DC breaking current (A)<br>**----- End of picture text -----**<br>


- When switching a resistive load (DC1) having voltage and current values under the curve, an electrical life of ≥ 100 · 10[3] can be expected. 

- In the case of DC13 loads, the connection of a diode in parallel with the load will permit a similar electrical life as for a DC1 load. Note: the release time for the load will be increased. 

## **Coil specifications** 

|Nominal<br>voltage<br>UN|Coil code|Operating range<br>Umin<br>Umax|Operating range<br>Umin<br>Umax|Resistance<br>R|
|---|---|---|---|---|
|V||V|V|Ω|
|6|**9**.006|4.8|6.6|28|
|12|**9**.012|9.6|13.2|110|
|24|**9**.024|19.2|26.4|445|
|48|**9**.048|38.4|52.8|1770|
|60|**9**.060|48|66|2760|
|110|**9**.110|88|121|9420|
|125|**9**.125|100|138|12000|
|220|**9**.220|176|242|37300|



## **AC coil data** 

**==> picture [253 x 50] intentionally omitted <==**

**----- Start of picture text -----**<br>
Nominal  Coil code Operating range Resistance Rated coil<br>voltage absorption<br>UN Umin Umax R I at UN (50 Hz)<br>V V V Ω mA<br>**----- End of picture text -----**<br>


||**ta**|||||
|---|---|---|---|---|---|
||Coil code<br>|Operating range<br>Umin<br>Umax<br>V<br>V<br><br>||Resistance<br>R<br>Ω<br>|Rated coil<br>absorption<br>Iat UN(50 Hz)<br>mA<br>|
|6<br>12<br>24<br>48<br>60<br>110<br>120<br>230<br>240<br>400|**8**.006|4.8|6.6|4.6|367|
||**8**.012|9.6|13.2|19|183|
||**8**.024|19.2|26.4|74|90|
||**8**.048|38.4|52.8|290|47|
||**8**.060|48|66|450|37|
||**8**.110|88|121|1600|20|
||**8**.120|96|132|1940|18.6|
||**8**.230|184|253|7250|10.5|
||**8**.240|192|264|8500|9.2|
||**8**.400|320|440|19800|6|



**7** 

**60 SERIES** 

**A** 

## **Coil specifications R 60 - DC coil operating range v ambient temperature** 

**==> picture [239 x 118] intentionally omitted <==**

**1 -** Max. permitted coil voltage. **2 -** Min. pick-up voltage with coil at ambient temperature. 

## **R 60 - AC coil operating range v ambient temperature** 

**==> picture [240 x 119] intentionally omitted <==**

**1 -** Max. permitted coil voltage. 

**==> picture [192 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
2 -   Min. pick-up voltage with coil at ambient temperature.<br>**----- End of picture text -----**<br>


## **Current sensing version** 

## **Current sensing DC coil data** 

**==> picture [254 x 16] intentionally omitted <==**

**----- Start of picture text -----**<br>
Coil code Imin (A) IN (A) Imax (A) R (Ω)<br>**----- End of picture text -----**<br>


**==> picture [98 x 88] intentionally omitted <==**

Typical application with current sensing relays. An open circuit filiment of lamp L1 is detected by the current sensing relay coil (K1) which causes the back-up safety lamp L2 to be energised, and indication of failure at the control panel via lamp S1. 

Example: navigation light. L1 = Light L2 = Safety light S1= Control light K1 = Relay 

|Coil code|Imin(A)|IN(A)<br>Ima|x(A)<br>R (Ω)|
|---|---|---|---|
|4202|1.7|2.0<br>|2.4<br>0.15|
|4182|1.5|1.8<br>|2.2<br>0.19|
|4162|1.4|1.6<br>|1.9<br>0.24|
|4142|1.2|1.4<br>|1.7<br>0.31|
|4122|1.0|1.2<br>|1.4<br>0.42|
|4102|0.85|1.0<br>|1.2<br>0.61|
|4092|0.8|0.9<br>|1.1<br>0.75|
|4062|0.5|0.6<br>|0.7<br>1.70|
|4032|0.25|0.3<br>|0.4<br>6.70|
|4012|0.085|0.1<br>|0.15<br>61|



## **Current sensing AC coil data** 

**==> picture [254 x 16] intentionally omitted <==**

**----- Start of picture text -----**<br>
Coil code Imin (A) IN (A) Imax (A) R (Ω)<br>**----- End of picture text -----**<br>


|Coil code|Imin(A)|IN(A)<br>Ima|x(A)<br>R (Ω)|
|---|---|---|---|
|4251|2.1|2.5<br>|3.0<br>0.05|
|4181|1.5|1.8<br>|2.2<br>0.10|
|4161|1.4|1.6<br>|1.9<br>0.12|
|4121|1.0|1.2<br>|1.4<br>0.22|
|4101|0.85|1.0<br>|1.2<br>0.32|
|4051|0.42|0.5<br>|0.6<br>1.28|
|4041|0.34|0.4<br>|0.5<br>2.00|
|4031|0.25|0.3<br>|0.4<br>3.57|
|4021|0.17|0.2<br>|0.25<br>8.0|
|4011|0.085|0.1<br>|0.15<br>32.1|



Other types of current sensing relays are available on request. 

## **Outline drawings** 

Type 60.12/60.12 - 52xx 

**==> picture [72 x 59] intentionally omitted <==**

Type 60.13/60.13 - 52xx 

**==> picture [71 x 58] intentionally omitted <==**

**==> picture [37 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Type 60.62<br>**----- End of picture text -----**<br>


**==> picture [79 x 51] intentionally omitted <==**

**==> picture [37 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Type 60.63<br>**----- End of picture text -----**<br>


**==> picture [80 x 51] intentionally omitted <==**

**8** 

**60** 

**SERIES** 

**Accessories** 

**==> picture [520 x 664] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||||
|---|---|---|---|---|---|---|---|
|Module|Socket|Relay|Description|Mounting|Accessories|
|es|99.02|90.02|60.12|Screw terminal (Box clamp) socket|Panel or 35 mm rail|-  Coil indication and EMC|A|
|90.03|60.13|Double A1 terminal|(EN 60715) mount|suppression modules|
|-  Jumper link|
|-  Timer modules|
|-  Metal retaining clip|
|90.03|
|See page 10|vo|
|Module|Socket|Relay|Description|Mounting|Accessories|
|99.01|90.20|60.12|Screw terminal (Box clamp) socket|Panel or 35 mm rail|-  Coil indication and EMC|
|90.21|60.13|(EN 60715) mount|suppression modules|
|-  Metal retaining clip|
|i|90.21|
|See page 11|
|Module|Socket|Relay|Description|Mounting|Accessories|
|—|90.82.3|60.12|Screw terminal (Box clamp) socket|Panel or 35 mm rail|-  Metal retaining clip|
|—|90.83.3|60.13|(EN 60715) mount|
|(§)|
|ee|90.83.3|
|See page 12|
|Module|Socket|Relay|Description|Mounting|Accessories|
|—|90.22|60.12|Screw terminal (Box clamp) socket|Panel or 35 mm rail|-  Metal retaining clip|
|—|90.23|60.13|(EN 60715) mount|
|§)|
|g|e|90.23|
|See page 12|
|Module|Socket|Relay|Description|Mounting|Accessories|
|—|90.26|60.12|Screw terminal (Plate clamp) socket|Panel or 35 mm rail|-  Metal retaining clip|
|—|90.27|60.13|(EN 60715) mount|
|e|(SE|90.26|
|See page 13|
|Module|Socket|Relay|Description|Mounting|Accessories|
|—|90.12|60.12|Flange mount solder socket|M3 screw fixing|—|
|—|90.13|60.13|
|CO|
|90.12|
|See page 13|
|Module|Socket|Relay|Description|Mounting|Accessories|
|—|90.14|60.12|PCB socket|PCB|—|
|—|90.14.1|60.12|
|90.15|
|See page 14|—|90.15|60.13|
|—|90.15.1|60.13|
|le|=|—|
|Sheet of marker tags (CEMBRE Thermal transfer printers)|for relay types 60.12 and 60.13,|
|060.48|
|plastic, 48 tags, 6 x 12 mm|

**----- End of picture text -----**<br>


**060.48** 

**9** 

**60 SERIES** 

**A** 

**==> picture [483 x 235] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||
|---|---|---|---|---|---|
|Screw terminal (Box clamp) socket|90.02|90.02.0|90.03|90.03.0|
|panel or 35 mm rail (EN 60715) mount|Blue|Black|Blue|Black|
|For relay type|60.12|60.13|
|Accessories|
|Metal retaining clip|090.33|
|6-way|jumper link|090.06|
|90.03|
|Identification tag|090.00.2|
|Approvals|
|(according to type):|Modules (see table below)|99.02|
|CE|@|EA|®@|Timer modules (see table below)|86.00, 86.30|
|Technical data|
|CAlus|Rated values|10 A - 250 V|
|Dielectric strength|2 kV AC|
|e@)us|Certain relay/socket combinations|Protection category|IP 20|
|Ambient temperature|°C|–40…+70|
|)|Screw torque|Nm|0.6|
|Wire strip length|mm|10|
|Max. wire size for 90.02 and 90.03 sockets|solid wire|stranded wire|
|mm|[2]|1 x 6 / 2 x 2.5|1 x 4 / 2 x 2.5|
|AWG|1 x 10 / 2 x 14|1 x 12 / 2 x 14|

**----- End of picture text -----**<br>


**6-way jumper link** for 90.02 and 90.03 sockets 090.06 (blue) 090.06.0 (black) Rated values 10 A - 250 V Approvals (according to type): TA **090.06** @ FAL SANs ~~om~~ **86 series timer modules** Multi-voltage: (12…240)V AC/DC; Multi-functions: AI, DI, SW, BE, CE, DE, EE, FE; (0.05 s…100 h) 86.00.0.240.0000 **86.00** aL (12…24)V AC/DC; Bi-function: AI, DI; (0.05 s…100 h) ~~49.5 15 23 15 23 15~~ 86.30.0.024.0000 ~~49.5 | 128 ||~~ (110…125)V AC; Bi-function: AI, DI; (0.05 s…100 h) 86.30.8.120.0000 (230…240)V AC; Bi-function: AI, DI; (0.05 s…100 h) 86.30.8.240.0000 Approvals (according to type): **99.02 coil indication and EMC suppression modules** for 90.02 and 90.03 sockets **86.30** Co Diode (+A1, standard polarity) ~~C€ FAL Adis~~ (6…220)V DC 99.02.3.000.00 LED (6…24)V DC/AC 99.02.0.024.59 LED (28…60)V DC/AC 99.02.0.060.59 LED (110…240)V DC/AC 99.02.0.230.59 LED + Diode (+A1, standard polarity) (6…24)V DC 99.02.9.024.99 LED + Diode (+A1, standard polarity) (28…60)V DC 99.02.9.060.99 **99.02** LED + Diode (+A1, standard polarity) (110…220)V DC 99.02.9.220.99 Approvals LED + Varistor (6…24)V DC/AC 99.02.0.024.98 (according to type): LED + Varistor (28…60)V DC/AC 99.02.0.060.98 EAL cANus LED + Varistor (110…240)V DC/AC 99.02.0.230.98 RC circuit (6…24)V DC/AC 99.02.0.024.09 DC Modules with nonRC circuit (28…60)V DC/AC 99.02.0.060.09 standard polarity (+A2) on RC circuit (110…240)V DC/AC 99.02.0.230.09 request. Residual current by-pass (110…240)V AC 99.02.8.230.07 E 

**10** 

**60 SERIES** 

**90.21** Approvals (according to type): 

|**Screw terminal (Box clamp) socket**<br>panel or 35 mm rail (EN 60715) mount<br>For relay type<br>**Accessories**<br>Metal retaining clip<br>pplied with socket -packagingcode SMA)|**90.20**<br>**Blue**<br>**90.20.0**<br>**Black**<br>**90.21**<br>**Blue**<br>**90.21.0**<br>**Black**<br>60.12<br>60.13<br>090.33|**90.20**<br>**Blue**<br>**90.20.0**<br>**Black**<br>**90.21**<br>**Blue**<br>**90.21.0**<br>**Black**<br>60.12<br>60.13<br>090.33|
|---|---|---|
|Modules (see table below)<br>**Technical data**<br>Rated values|99.01<br>10 A - 250 V||
|Dielectric strength|2 kV AC||
|Protection category|IP 20||
|Ambient temperature<br>Screw torque|°C –40…+70||
|Screw torque<br>Nm|Nm 0.5||
|Wire striplength<br>mm|mm 10||
|Max. wire size for 90.20 and 90.21 sockets<br>mm<br>AWG|solid wire<br>stranded wire<br>mm2<br>1 x 6 / 2 x 2.5<br>1 x 6 / 2 x 2.5|stranded wire|
|||1 x 6 / 2 x 2.5|
||AWG<br>1 x 10 / 2 x 14<br>1 x 10 / 2 x 14|1 x 10 / 2 x 14|



**A** 

**==> picture [191 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
90.20 90.21<br>**----- End of picture text -----**<br>


## **99.01 coil indication and EMC suppression modules** for 90.20 and 90.21 sockets 

## **99.01** 

Approvals (according to type): 

*  Modules in Black housing are available on request. 

Green LED is standard. Red LED available on request. 

||**Blue***|
|---|---|
|Diode (+A1, standard polarity)<br>(6…220)V DC|99.01.3.000.00|
|Diode (+A2, non-standard polarity)<br>(6…220)V DC|99.01.2.000.00|
|(6…24)V DC/AC|99.01.0.024.59|
|(28…60)V DC/AC|99.01.0.060.59|
|(110…240)V DC/AC|99.01.0.230.59|
|LED + Diode (+A1, standard polarity)<br>(6…24)V DC|99.01.9.024.99|
|LED + Diode (+A1, standard polarity)<br>(28…60)V DC|99.01.9.060.99|
|LED + Diode (+A1, standard polarity)<br>(110…220)V DC|99.01.9.220.99|
|LED + Diode (+A2, non-standard polarity)<br>(6…24)V DC|99.01.9.024.79|
|LED + Diode (+A2, non-standard polarity)<br>(28…60)V DC|99.01.9.060.79|
|LED + Diode (+A2, non-standard polarity)<br>(110…220)V DC|99.01.9.220.79|
|LED + Varistor<br>(6…24)V DC/AC|99.01.0.024.98|
|LED + Varistor<br>(28…60)V DC/AC|99.01.0.060.98|
|LED + Varistor<br>(110…240)V DC/AC|99.01.0.230.98|
|RC circuit<br>(6…24)V DC/AC|99.01.0.024.09|
|RC circuit<br>(28…60)V DC/AC|99.01.0.060.09|
|RC circuit<br>(110…240)V DC/AC|99.01.0.230.09|
|Residual current by-pass<br>(110…240)V AC|99.01.8.230.07|



**11** 

**60 SERIES** 

**A** 

**==> picture [488 x 541] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|Screw terminal (Box clamp) socket|90.82.3|90.82.30|90.83.3|90.83.30|
|panel or 35 mm rail (EN 60715) mount|Blue|Black|Blue|Black|
|For relay type|60.12|60.13|
|Accessories|
|Metal retaining clip|090.33|
|Technical data|
|90.83.3|Rated values|10 A - 250 V|
|Approvals|
|Dielectric strength|2 kV AC|
|(according to type):|
|C€|@|FAL|Adis®|Protection cateAmbient temperature  gory|°C|IP 20–40…+70|
|Screw torque|Nm|0.8|
|Max. wire size for 90.82.3 and 90.83.3 sockets|solid wire|stranded wire|
|mm|[2]|1 x 6 / 2 x 4|1 x 6 / 2 x 4|
|AWG|1 x 10 / 2 x 14|1 x 10 / 2 x 14|
|NO|NC|NC|NO|
|1|Q|©|i|NC|NO|fa]|NC|i|5|i|a|
|NC|
|o|O|12|o|
|©|lO|SO)64|CO|TDoC) oft|8|ie|
|S|g|
|oo"|||my|Yt||],|Og?|q|sr|
|I|I|I|||
|COIL COM COM COIL|Les|||COI|L|COMCOM|C|OIL|||o|e|s|||4|——ro7|
|38|38|
|90.82.3|90.83.3|
|Screw terminal (Box clamp) socket|90.22|90.23|
|panel or 35 mm rail (EN 60715) mount|Blue|Blue|
|For relay type|60.12|60.13|
|Accessories|
|Metal retaining clip|
|(supplied with socket - packaging code SMA)|090.33|
|90.23|Technical data|
|Approvals|Rated values|10 A - 250 V|
|(according to type):|Dielectric strength|2 kV AC|
|C€|@|FAL|AXis|Protection category|IP 20|
|Ambient temperature|°C|–40…+70|
|Screw torque|Nm|0.5|
|Wire strip length|mm|7|
|Max. wire size for 90.22 and 90.23 sockets|solid wire|stranded wire|
|mm|[2]|1 x 6 / 2 x 2.5|1 x 6 / 2 x 2.5|
|AWG|1 x 10 / 2 x 14|1 x 10 / 2 x 14|

**----- End of picture text -----**<br>


**==> picture [241 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
90.22 90.23<br>**----- End of picture text -----**<br>


**12** 

**60 SERIES** 

**Screw terminal (Box clamp) socket 90.26 90.26.0 90.27 90.27.0** panel or 35 mm rail (EN 60715) mount **Blue Black Blue Black** For relay type 60.12 60.13 **Accessories** Metal retaining clip (supplied with socket - packaging code SMA) 090.33 **90.26 Technical data** Approvals (according to type): Rated values 10 A - 250 V C€ @ HAL @ Dielectric strength 2 kV AC ® Protection category IP 20 cus Ambient temperature °C –40…+70 Screw torque Nm 0.8 Wire strip length mm 10 Max. wire size for 90.26 and 90.27 sockets solid wire stranded wire mm[2] 1 x 4 / 2 x 2.5 1 x 4 / 2 x 2.5 AWG 1 x 12 / 2 x 14 1 x 12 / 2 x 14 NO NC NC NO 33 20 NC NOCOM NC 35 ~~haa~~ La (oxo) ~~q~~ hao | hi © GouP22 g© ©Ee+— Gia ale ~~a~~ ite}SofiaA | ~~w0~~ No ~~S~~ le ~~leje~~ le}S~) «fA COILCOMCOMCOIL ~~La~~ 1,23 ~~, COIL COM~~ COM COIL ~~43~~ 31 90.26 90.27 

**Flange mount solder socket** mount with M3 screw **90.12 (black) 90.13 (black)** For relay type 60.12 60.13 **Technical data** Rated values 10 A - 250 V Dielectric strength 2 kV AC Ambient temperature °C –40…+70 

**==> picture [75 x 30] intentionally omitted <==**

**----- Start of picture text -----**<br>
90.12<br>Approvals<br>(according to type):<br>**----- End of picture text -----**<br>


**==> picture [10 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
A<br>**----- End of picture text -----**<br>


**==> picture [88 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
90.12 90.13<br>**----- End of picture text -----**<br>


**13** 

**60 SERIES** 

**==> picture [482 x 287] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|PCB socket|Blue|90.14 (Ø 20.5 mm)|90.15 (Ø 22 mm)|
|Blue|90.14.1 (Ø 17.5 mm)|90.15.1 (Ø 19 mm)|
|For relay type|60.12|60.13|
|90.15|
|A|Technical data|
|Approvals|
|Rated values|10 A - 250 V|
|(according to type):|
|Dielectric strength|2 kV AC|
|Ambient temperature|°C|–40…+70|
|pele,|0|%,|Pe|P|eg|s|0|S0\|(SPS|+|
|90.14|90.14.1|90.15|90.15.1|90.14|90.15|
|Takis|TARE|
|tol|lol.|
|90.14|90.15|

**----- End of picture text -----**<br>


## **Packaging codes** 

**How to code and identify retaining clip and packaging options for sockets.** 

Example: **9 0 . 2 1 S M A A** Standard packaging Ln Ee ~~7~~ **SM** Metal retaining clip **9 0 . 2 1** Without retaining clip ~~ee~~ 

Please see general technical information 

**14**