Image not available
Illustrative purposes only
55000005-002
SENSOR HARDWARE-ACCESSORIES FIBER
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: HONEYWELL / PARTNER STOCK
- Product type:
- SVHC: To Be Advised
| Delivery and price | |
|---|---|
| Units per pack | 3 |
| Price | 371.58 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
940 Series
## **Ultrasonic Sensors** Compact 18 mm Diameter Digital
## **FEATURES**
e Sensing distance up to 1,5 meters e IP 67 sealing High power transducer e 18 mm diameter housing e High output current e Microprocessor controlled
## **ORDER GUIDE**
|**ORDER GUIDE**|||||
|---|---|---|---|---|
|**Sensor**<br>**Package**<br>**Style**|**Sensing**<br>**Range***<br>**mm (in.)**|**Digital**<br>**Output**|**Termination**|**Catalog**<br>**Listing**|
|18 mm dia.<br>PBTB Plastic|200 - 1500<br>(7.87 - 59.05)|PNP, N.O.|Cable|940-F4Y-2D-001-180E|
|||NPN, N.O.|Cable|940-F4Y-2D-002-180E|
|||PNP, N.O.|Connector cable|940-F4X-2D-001-180E|
|||NPN, N.O.|Connector cable|940-F4X-2D-002-180E|
||150 - 700<br>(5.9 - 27.5)|PNP, N.O.|Cable|940-F4Y-2D-001-300E|
|||NPN, N.O.|Cable|940-F4Y-2D-002-300E|
|||PNP, N.O.|Connector cable|940-F4X-2D-001-300E|
|||NPN, N.O.|Connector cable|940-F4X-2D-002-300E|
* Standard target is 120 mm square of mild steel perpendicular to ultrasonic beam.
## **SPECIFICATIONS**
|**Catalog Listings**|**940-F4Y-2D-001-180E**<br>**940-F4Y-2D-002-180E**<br>**940-F4X-2D-001-180E**<br>**940-F4X-2D-002-180E**|**940-F4Y-2D-001-300E**<br>**940-F4Y-2D-002-300E**<br>**940-F4X-2D-001-300E**<br>**940-F4X-2D-002-300E**|
|---|---|---|
|Max. Sensing Distance|1500 mm (59.05 in.)|700 mm (27.5 in.)|
|Min. Sensing Distance|200 mm (7.87 in.)|150 mm (5.91 in.)|
|Beam Angle|8°|8°|
|**POWER SUPPLY**|||
|Supply Voltage|19 - 30 VDC||
|Supply Current|<25 mA without load|<35 mA without load|
|Circuit Protection|Reverse polarity||
|**OUTPUT CHARACTERISTICS**|||
|Load Current|0 - 500 mA||
|Switching Frequency|8 Hz|25 Hz|
|Hysteresis|2% of setpoint|2.5% of setpoint|
|Repeatability|±1 mm||
|Setpoint Adjustment|4-turn potentiometer||
|Circuit Protection|Short circuit||
|**ENVIRONMENTAL**|||
|Operating Temperature|–15 to 70°C (5 to 158°F)||
|Storage Temperature|–25 to 85°C (–13 to 185°F)||
|Sealing|IP 67||
|**SPECIAL FEATURES**|||
|Hold Input|Stops transmission and reception when input is connected to 0 VDC. Last output will be stored until input is disconnected||
|Synchronization Input|Avoids mutual interference from several sensors by interconnecting the hold input from each sensor.||
|LED Indicator|Illuminates when sensor detects target||
**B82** Honeywell e MICRO SWITCH Sensing and Control e 1-800-537-6945 USA e+ 1-815-235-6847 International e 1-800-737-3360 Canada
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
940 Series
## **Ultrasonic Sensors**
## Compact 18 mm Diameter Digital **WIRING DIAGRAM**
## **940-F4X/Y-20-001/2-300E Versions only**
**4-pin DC Micro (M12 x 1)** Pin Color 1 BRN 2 PINK 3 BLU 4 BLK
*Normal operation with no connection
**MOUNTING DIMENSIONS** (For reference only) 940-F4X/Y-20-001/2-180E 940-F4X/Y-2D-001/2-300E
## **ACCESSORIES**
|**ACCESSORIES**|||
|---|---|---|
||**Catalog Listing**|**Feature**|
|Mounting clamp|43178389-018|Allows mounting to a flat surface|
|Beam deflector|43192871-003|Allows right angle mounting (Approx. dim. 50 x 170 mm)|
|Focusing beam deflector|43192871-004|Reduces beam angle by approximately 1/2 (Approx. dim.<br>35 x 52 mm)|
|Straight connector w/o cable|66195044-001|Connector has screw terminals for wiring connection|
|Right angle connector w/o cable|66195045-001|Connector has screw terminals for wiring connection|
|24 VDC Power supply, Relay output, 110 VAC input|FF-MADB24RB|See page B102 for more information|
|24 VDC POwer supply, On/Off delay, 110 VAC input|FF-MADC24RB|See page B102 for more information|
Honeywell MICRO SWITCH Sensing and Control 1-800-537-6945 USA 1-815-235-6847 International 1-800-737-3360 Canada
**B83**
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
**Ultrasonic Sensors** 30 mm Diameter Analog
940 Series
## **FEATURES**
Measuring range up to 2000 mm (78.74 in.)
High repeatability
## **ORDER GUIDE**
|**ORDER GUIDE**|||||
|---|---|---|---|---|
|**Sensor**<br>**Package**<br>**Style**|**Sensing**<br>**Range***<br>**mm (in.)**|**Analog**<br>**Output**|**Termi-**<br>**nation**|**Catalog**<br>**Listing**|
|30 mm dia.<br>Stainless Steel|300 - 2000<br>(11.81 - 78.74)|1.5 - 10 V|Cable<br>~~ee~~|940-A4Y-AD-1C0-130E<br>~~ee~~|
||150 - 1200<br>(5.90 - 47.24)|1.25 - 10 V|Cable<br>~~ee~~|940-A4Y-AD-1C0<br>~~ee~~|
||||Connector<br>~~ee ~~|940-A4V-AD-1C0<br> ~~ee~~|
||||||
* Standard target is 120 mm square of mild steel perpendicular to ultrasonic beam.
## **SPECIFICATIONS**
|**SPECIFICATIONS**|||||
|---|---|---|---|---|
|**Catalog Listings**<br>~~po~~|**940-A4Y-AD-1C0-130E**<br>~~po~~<br>~~————E~~||**940-A4Y-AD-1C0**<br>**940-A4V-AD-1C0**<br>~~————E~~||
|~~po~~|Max. Range<br>~~po~~|Max. Rate<br>~~po~~<br>~~————E~~|Max. Range<br>~~————E~~|Max. Rate<br>~~————E~~|
|Max. Sensing Distance<br>~~po~~<br>~~ee~~|2000 mm (78.74 in.)<br>~~po~~<br>~~ee~~|1000 mm (39.37 in.)<br>~~po~~<br>~~————E~~<br>~~ee~~|1200 mm (47.2 in.)<br>~~————E~~|600 mm (23.6 in.)<br>~~————E~~|
|Min. Sensing Distance<br>~~po~~<br>~~ee~~|300 mm (11.8 in.)<br>~~po~~<br>~~————E~~<br>~~ee~~||150 mm (5.91 in.)<br>~~————E~~||
|Beam Angle<br>~~po~~<br>~~ee~~<br>~~Po~~|8°<br>~~po~~<br>~~————E~~<br>~~ee~~||10°<br>~~————E~~||
|**POWER SUPPLY**<br>~~a~~|||||
|Supply Voltage<br>~~a~~|19 - 30 VDC||||
|Supply Current<br>~~a~~<br>~~a~~<br>~~a~~|<20 mA without load<br>||||
|Circuit Protection<br>~~a~~<br>~~a~~|Reverse polarity<br>||||
|**OUTPUT CHARACTERISTICS**<br>~~aCe~~|||||
|Load Current<br>~~Ce~~<br>~~a~~|10 mA max.<br>~~Ce~~<br>||||
|Switching Frequency<br>~~en~~|6 Hz<br>~~en~~||11 Hz||
|Repeatability<br>~~en~~<br>~~Po~~|±2 mm<br>~~en~~||±1 mm||
|Linearity<br>~~a~~|<0.2%||||
|Output Adjustment<br>~~a~~|4 Turn Potentiometer||||
|Output Mode<br>~~a~~<br>~~a~~|Max. Range or Max. Rate selected by wiring terminal connection<br>||||
|Circuit Protection<br>~~aOe~~|Short Circuit<br>~~Oe~~||||
|**ENVIRONMENTAL**<br>~~Oe~~<br>~~ee~~<br>~~ee~~|~~Oe~~<br>~~ee~~||||
|Operating Temperature<br>~~ee~~<br>~~ee~~|0 to 50°C (32 to 122°F)<br>~~ee~~||||
|Storage Temperature<br>~~ee~~<br>~~a~~|0 to 70°C (32 to 158°F)<br>||||
|Sealing<br>~~ee~~|IP 65<br>~~ee~~||||
|**SPECIAL FEATURES**<br>~~a~~|||||
|Hold Input<br>~~a~~|Stops transmission and reception of sensor when input is connected to 0 VDC. Analog output would be zero.||||
|Synchronization Input<br>~~a~~<br>~~a~~|Avoids mutual interference from several ultrasonic sensors (external synchronization unit required; see Accessories)||||
|LED Indicator<br>~~a~~<br>~~a~~|Illuminates when sensor detects a target||||
**B84** Honeywell , MICRO SWITCH Sensing and Control e 1-800-537-6945 USA @+ 1-815-235-6847 International ° 1-800-737-3360 Canada
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
-
## **Ultrasonic Sensors** 30 mm Diameter Analog **WIRING DIAGRAM**
## **CONNECTOR VERSION ONLY**
## 940 Series
Pin Color 1 BRN 2 WHT 3 BLU 4 BLK 5 GRAY
*Normal operation with connection +19-30 VDC
## **MOUNTING DIMENSIONS** (For reference only) **940-A4V-AD-1C0**
**940-A4Y-AD-1C0-130E 940-A4Y-AD-1C0**
|**ACCESSORIES**<br>mm<br>a<br>a<br>~~-»|ar~~<br>~~sw36~~|mm||<br>+<br>4,0<br>7<br>~~0.16~~<br>~~SW36~~|
|---|---|---|
|~~-»|ar~~<br>~~sw36~~|**Catalog Listing**|**Feature**<br>~~0.16~~<br>~~SW36~~|
|Mounting clamp, 30 mm sensor<br>~~-»|ar~~<br>~~sw36~~|43178389-030|Allows mounting to a flat surface<br>~~0.16~~<br>~~SW36~~|
|Beam deflector|43192871-001|Allows right angle mounting (Approx. dim. 50 x 170 mm)|
|Focusing beam deflector|43192871-002|Reduces beam angle by approximately 1/2|
|Compact deflector|66195116-001|Allows right angle mounting (Approx. dim. 35 x 52 mm)|
|2 meter cable, Straight connector|RKT5-612/2M|Used for wiring to connector version|
|5 meter cable, Straight connector|RKT5-612/5M|Used for wiring to connector version|
|2 meter cable, Right angle connector|RKWT5-612/2M|Used for wiring to connector version|
|5 meter cable, Right angle connector|RKWT5-612/5M|Used for wiring to connector version|
|Synchronization unit|55000001|Controls up to 100 sensors|
## **ACCESSORIES**
Honeywell MICRO SWITCH Sensing and Control 1-800-537-6945 USA 1-815-235-6847 International 1-800-737-3360 Canada
**B85**
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
942 Series
## **Ultrasonic Sensors** Compact 30 mm Diameter Analog and Digital, RS232/RS485 Interface
## **FEATURES**
ee Programmable 0 - 10 VDC/4 - 20 mA output e RS232 or RS485 interface e Two N.O. PNP outputs or one N.O. PNP/one N.C. PNP output
## **ORDER GUIDE**
|**SPECIFICATIONS**||||
|---|---|---|---|
|**Catalog Listings**|**942-A4N-2D-1C1-130E**<br>**942-A4N-2D-1D1-130E**<br>**942-A4N-2D-1E1-130E**<br>**942-A4N-2D-1F1-130E**|**942-A4N-2D-1C1-220S**<br>**942-A4N-2D-1D1-220S**<br>**942-A4N-2D-1E1-220S**<br>**942-A4N-2D-1F1-220S**|**942-A4N-2D-1C1-300E**|
|Max. Sensing Distance|3000 mm (118 in.)|1500 mm (59.1 in.)|600 mm (23.6 in.)|
|Min. Sensing Distance|300 mm (11.8 in.)|150 mm (5.91 in.)|100 mm (3.94 in.)|
|Beam Angle|8°|10°|8°|
|**POWER SUPPLY**||||
|Supply Voltage|19 - 30 VDC|||
|Supply Current|<30 mA without load|||
|Circuit Protection|Reverse Polarity|||
|**OUTPUT CHARACTERISTICS (DIGITAL)**||||
|Load Current|0 - 100 mA|||
|Hysteresis|Programmable (0 - 255 mm)|||
|Switching Frequency|Programmable 5-30 Hz|Programmable 5-30 Hz|Programmable 5-50 Hz|
|Repeatability|±2 mm or±0.4% of reading|||
|Setpoint Adjust|Programmable within sensing range|||
|Circuit Protection|Short circuit|||
|**OUTPUT CHARACTERISTICS (ANALOG)**||||
|Switching Frequency|Programmable 5-30 Hz|Programmable 5-30 Hz|Programmable 5-50 Hz|
|Repeatability|±2 mm or±0.4% of reading|||
|Linearity|3 mm or±0.5%|||
|Output Adjust|Programmable|||
|Circuit Protection|Short circuit|||
|**ENVIRONMENTAL**||||
|Operating Temperature|–15 to 70°C (5 to 150°F|||
|Storage Temperature|–25 to 85°C (–13 to 185°F)|||
|Sealing|IP 65|||
|**SPECIAL FEATURES**||||
|Hold Input|Stops transmission and reception when input is connected to 0 VDC. Analog output would be zero.|||
|Synchronization input|Avoids mutual interference from several sensors by interconnecting the Hold input from each sensor.|||
|LED Indicator|Illuminates when sensor detects target|||
|Programmable Parameters|Analog Output: Span, Offset, Positive or Negative slope<br>Digital Output: Hysteresis, N.O./N.C.|||
* Standard target is 120 mm square of mild steel perpendicular to ultrasonic beam.
## **SPECIFICATIONS**
**B86** Honeywell e MICRO SWITCH Sensing and Control e 1-800-537-6945 USA @+ 1-815-235-6847 International e 1-800-737-3360 Canada
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
**Ultrasonic Sensors**
942 Series
## Compact 30 mm Diameter Analog and Digital, RS232/RS485 Interface **WIRING DIAGRAM**
*Normal operation with no connection
## **MOUNTING DIMENSIONS** (For reference only)
## **ACCESSORIES**
|**ACCESSORIES**|||
|---|---|---|
||**Catalog Listing**|**Features**|
|Mounting clamp|43178389-030|Allows mounting to flat surface|
|Beam deflector|43192871-001|Allows right angle mounting (approx. dim. 50 x 170 mm)|
|Focusing beam deflector|43192871-002|Reduces beam angle by approximately 50%|
|Compact deflector|66195116-001|Allows right angle mounting (approx. dim. 35 x 52 mm)|
|Programming adapter|55000005-002|Allows sensor programming via RS232 interface|
|RS232/RS485 converter|55000003-001|Converts RS232 interface to RS485 interface|
|24 VDC Power supply, relay output, 110 VAC input|FF-MADB24RB|See page B102 more information|
|24 VDC Power supply, On/Off delay, 110 VAC input|FF-MADC24RB|See page B102 more information|
|Software package (disk, manual, cable+ 1 sub min D9<br>connector)|55195101-101|Allows programming of sensor|
|Software package (disk, manual, cable+ 2 sub min D9<br>connectors)|55195101-102|Allows programming of sensor|
|Straight connector|66195126-001|Used for wiring to connector|
|2 meter cable with straight connector|55195126-001|Used for wiring to connector|
Honeywell e MICRO SWITCH Sensing and Control e 1-800-537-6945 USA e+ 1-815-235-6847 International e 1-800-737-3360 Canada
**B87**
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
942 Series
## **Ultrasonic Sensors**
## 2-Piece 30 mm Diameter Precision Switching, Analog, Digital BCD, Hexadecimal Outputs **FEATURES**
**Background suppression** Compensated over 0 to 50 ° C Sensor sealed to IP 65 (32 to 120 ° F) Amplifier sealed to IP 54 Amplifier provides analog, digital DIN rail mounting switching, BCD or hexadecimal outputs
## **ORDER GUIDE**
|**ORDER GUIDE**||||||
|---|---|---|---|---|---|
|**Sensor**<br>**Package**<br>**Style**<br>~~ae~~|**Sensing**<br>**Range***<br>**mm(in.)**<br>~~ae~~<br>~~ee~~|**Digital**<br>**Output****<br>~~ae~~<br>~~ee~~|**Multiplex**<br>**Digital**<br>**Output**<br>~~ae~~<br>~~ee~~|**Analog**<br>**Output**<br>~~ae~~|**Catalog**<br>**Listing*****|
|30 mm (1.18 in.)<br>Stainless steel sensor head<br>272g (9.6 oz)<br>I|150 - 1500<br>(5.9 - 59.0)<br>~~ee ~~|Two PNP<br>N.O. or N.C.<br> ~~ee ~~|BCD/HEX<br> ~~ee~~|0 - 10 VDC<br>4 - 20 mA|942-M3A-2D-1G1-220S<br>*Standard target: 120 mm thick<br>square of mild steel perpendicular to<br>ultrasonic beam.<br>**N.O./N.C. output selectable<br>***Includes stainless steel sensor<br>head, cable, straight connector and<br>amplifier.|
## **SPECIFICATIONS**
|**SPECIFICATIONS**||
|---|---|
|Max. SensingDistance|1500 mm(59.1 in.)|
|Min. SensingDistance|150 mm(5.91 in.)|
|Beam Angle|10°/5°|
|**POWER SUPPLY**||
|SupplyVoltage|19-30 VDC|
|SupplyCurrent|<130 mA without load|
|Circuit Protection|Reversepolarity|
|**OUTPUT CHARACTERISTICS(DIGITAL)**||
|Load Current|0-100 mA|
|Hysteresis|±1% of setpoint|
|SwitchingFrequency|8 Hz|
|Repeatability|±1 mm or 0.2% of reading|
|Setpoint Adjustment|Digital switches|
|Output Adjustment|Beam angle 10°w/max. sensitivityor beam angle 5°w/min. sensitivity|
|Circuit Protection|Short circuit|
|**OUTPUT CHRACTERISTICS(MULTIPLEX DIGITAL)**||
|Resolution|1 mm|
|Information Output|Bit Parallel/Word Serial|
|Setpoint Adjustment|Beam angle 10°w/max. sensitivityor beam angle 5°w/min. sensitivity|
|**OUTPUT CHARACTERISTICS(ANALOG)**||
|SwitchingFrequency|8 Hz|
|Repeatability|±1 mm or 0.2% of reading|
|Linearity|±2 mm or 0.3%|
|Output Range Adjustment|Digital switches|
|Output Adjustment|Beam angle 10°w/max. sensitivityor beam angle 5°w/min. sensitivity|
|Min. Load Resistance(VDC)|1000 Ohms(0-10 VDC output)|
|Max. Load Resistance(mA)|250 Ohms(4-20 mA output)|
|Slope of Output|Positive or Negative via switch|
|**ENVIRONMENTAL**||
|OperatingTemperature|Sensor head: 0 to 70°C(32 to 158°F)/Amplifier: 0 to 50°C(32 to 122°F)|
|Storage Temperature|Sensor head/Amplifier: –25 to 85°C(–13 to 185°F)|
|Sealing|Sensor Head: IP 65/Amplifier: IP 54|
|**SPECIAL FEATURES**||
|LED Indicators|RED - Under Range/ RED - Over Range: illumination dependent on analog range chosen and target<br>position with respect to sensor<br>YELLOW - Setpoint: illuminates when target reaches setpoint 1 or setpoint 2|
|Hold Input|Stops transmission and reception when input is connected to 0 VDC. Last output stored until input is disconnected|
|Synchronization Input|Avoids mutual interference from several sensors byinterconnectingthe hold input from each sensor|
**B88** Honeywell MICRO SWITCH Sensing and Control 1-800-537-6945 USA 1-815-235-6847 International 1-800-737-3360 Canada
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
942 Series
## **Ultrasonic Sensors** 2-Piece 30 mm Diameter Precision Switching, Analog, Digital BCD, Hexadecimal Outputs
**==> picture [524 x 313] intentionally omitted <==**
**----- Start of picture text -----**<br>
WIRING DIAGRAM PWS External supply terminals MOUNTING DIMENSIONS (For reference only)<br>1 19-30 V 19-30 V supply<br>Sensor Evaluation Power 2Sensor headGND Sensor head terminals0 V line 97,0<br>1 BN 3 3 19-30 V +Vs supply voltage ,<br>head 24V-electronics24V + suooly unit 4 GND 0 V line — 216 | 3.82<br>5 STA Signal transmit<br>command<br>( feeSTA 6 STO Stop signal, echo ms0reex 1,5 —-+—- it<br>received<br>Px Teen 7 SEN Receive sensitivity mane4H<br>JB YW BirenSEN PLC 8 TEM Temperature sensor SW36<br>ro77 Hippel? RM CO Transmit control<br>942-ASM-2D-KXXXX ft ff! 9 GND 0 V line<br>10 HLD Transmit inhibit,<br>tol. GN r. | 47kQ synchronize -—[e[o[o}) ala{o[olo|| 75,0f<br>Outputs Switching outputs<br>11 GND 0 V line<br>7775. Typ. input or PLC a L rs 2.95<br>12 ORA No echo, out of range<br>teenBN OUtDUT CUCU eneG5 SP192 13 URA Under range, target tooclose [HoneywelUg NBERJ | rR<br>au B rownur e en a,jo.:' OIorate 14 SP1 Switching output 1 aSs3.94 295<br>15 SP2 Switching output 2<br>GY Grey ae enol} — 43 [<br>PK Pink . Analog out Analog outputs I<br>YWWH YeltowWhite rene y 16 PLC 1617 VGND V out, 0-10 V0 V line ¢ 10,010.9<br>} ‘ 18 I Current out, 4-20 mA 81,0<br>fe vad? + Digital out Multiplexed digital 28 2.40<br>outputs<br>23 10 [3] 1000 decade strobe<br>" vd i. 24 10 [2] 100 decade strobe a<br>‘9! GND ai 335<br>25 10 [1] 10 decade strobe<br>26 10 [0] 1 decade strobe<br>De. 27 2 [3] 8 BCD/HEX<br>28 2 [2] 4 BCD/HEX<br>29 2 [1] 2 BCD/HEX<br>30 2 [0] 1 BCD/HEX<br>Proximity<br>**----- End of picture text -----**<br>
## **ACCESSORIES**
|**ACCESSORIES**|||
|---|---|---|
||**Catalog Listing**|**Features**|
|Mounting clamp|43178389-030|Allows mounting to flat surface|
|Beam deflector|43192871-001|Allows right angle mounting (approx. dim. 50 x 170 mm)|
|Focusing beam deflector|43192871-002|Reduces beam angle by approximately 50%|
|Compact deflector|66195116-001|Allows right angle mounting (approx. dim. 35 x 52 mm)|
## **REPLACEMENT LISTINGS**
|**REPLACEMENT LISTINGS**||
|---|---|
|Sensor Head|942A4M-2D-K220S|
|Amplifier|942-M0A-2D-1G1-220S|
|Straight Connector (cable not included)|66195074-001|
## **942 SERIES ULTRASONIC CROSS REFERENCE**
|**Obsolete Listing**|**Replacement Listing**|**Comments**|
|---|---|---|
|942-M88<br>942-M88-LF|942-M96|Sensor head, includes<br>connector|
|942-M3A-2D-1G1|942-M0A-2D-1G1-220S|Amplifier|
Honeywell e MICRO SWITCH Sensing and Control e 1-800-537-6945 USA e+ 1-815-235-6847 International e 1-800-737-3360 Canada
**B89**
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
HRTS Series
## **Temperature Sensors** Platinum RTDs
## **FEATURES**
Resistance interchangeable Accurate Linear
Fast Laser trimmed Bolt, cement-on or strap-on models
## **TYPICAL APPLICATIONS**
_~e
e HVAC – room, duct and refrigerant equipment
e OEM assemblies e Electronic assemblies – semiconductor protection, temperature compensation e Process control – temperature regulation
## **ORDER GUIDE**
|**ORDER GUIDE**|||||
|---|---|---|---|---|
|**HRTS-5760-B**|Miniature, ceramic body, 28 ga TFE Teflon insulated leads (2-wire only)||||
|**HRTS-61**<br>~~MR~~|Bolt-on, nickel plated copper alloy body, 24 ga fiberglass insulated leads,<br>SST braid, TFE overwrap, spiral armor<br>~~MR~~<br>~~Bo ee0~~||||
|**-T**<br>100 ,0.00385 / /°C,3-wire leads,DIN specification<br>**-U**<br>1000 , 0.00375 / /°C, 2-wire leads<br>**-0**<br>±0.2% Resistance Trim (Standard)<br>**-1**<br>±0.1% Resistance Trim (Optional)<br>**-12**<br>Standard length, HRTS-5760-B<br>**-24**<br>Standard length, HRTS-61<br>~~MR~~<br>~~Bo ee 0~~<br>~~3~~<br>~~a~~<br>~~ee~~<br>~~a~~<br>~~ee~~<br>~~a~~|**-T**<br>~~MR~~|100 ,0.00385 / /°C,3-wire leads,DIN specification<br>~~Bo ee0~~|||
||**-U**<br>~~MR~~<br>~~3~~|1000 , 0.00375 / /°C, 2-wire leads<br>~~Bo ee 0~~<br>~~a~~<br>~~ee~~|||
|||**-0**<br>~~a~~<br>~~a~~|±0.2% Resistance Trim (Standard)<br>~~ee~~<br>~~ee~~||
|||**-1**<br>~~a~~<br>~~a~~|±0.1% Resistance Trim (Optional)<br>~~ee~~<br>~~ee~~||
||||**-12**<br>~~a~~|Standard length, HRTS-5760-B<br>~~ee~~|
||||**-24**|Standard length, HRTS-61|
The HRTS is designed to measure surface temperatures from −200 ° to +480 ° C (−320 ° to +900 ° F) in printed circuit, temperature probe, or other applications.
HRTS surface temperature sensors are fully assembled elements, ready to use, without the need for fragile splices to extension leads.
A thin layer of platinum is deposited on an alumina substrate and laser trimmed to a resistance interchangeability of ±0.2% with ±0.5 ° C accuracy or ±0.1% with ±0.3 ° C accuracy. The sensor chip is then glassed, wired and potted or ceramic fired to result in a cylindrical alumina package with either Teflon or fiber glass insulated lead wires.
**Fig. 1: Wheatstone Bridge 2-Wire Interface**
**Fig. 2: Linear Output Voltage**
## **MOUNTING DIMENSIONS** (for reference only)
**HRTS-5760-B**
## **HRTS-61**
**Fig. 3: Adjustable Point (Comparator) Interface**
Honeywell e MICRO SWITCH Sensing and Control e 1-800-537-6945 USA a 1-815-235-6847 International . 1-800-737-3360 Canada
**93**
HRTS Series
## **Temperature Sensors** Platinum RTDs
## **FUNCTIONAL BEHAVIOR**
## **ACCURACY VS TEMPERATURE**
|**FUNCTIONAL BEHAVIOR**|**FUNCTIONAL BEHAVIOR**|**FUNCTIONAL BEHAVIOR**||**ACCURACY VS TEMPERATURE**|
|---|---|---|---|---|
|RT<br>R0(1+AT+BT2−100CT3+CT4)||||HRTS platinum RTDs are available in two base resistance trim|
|RT<br>Resistance ( ) at temperature T (°C)<br>=<br>QO||||tolerances:±0.2% or±0.1%. The corresponding resistance|
|R0<br>Resistance ( <br>=|) at 0<br>QO|) at 0°C||interchangeability and temperature accuracy for these toler-|
|T<br>Temperature in<br>A<br>+<br>100<br>=a<br>asé|Temperature in|Temperature in°C<br>B<br>−<br>1002<br>=<br>asé|CT<0<br>−<br>1004<br>=<br>aB|ances are:<br>**Tolerance**<br>**Standard**±**0.2%**<br>**Optional**±**0.1%**<br>~~_—[]jS——~~|
|||||Temperature<br>± R*<br>± T<br>± R*<br>± T<br>A<br>A<br>A<br>A|
|||||(°C)<br>( )<br>(°C)<br>( )<br>(°C)<br>QO<br>10)|
|**CONSTANTS**||||−200<br>6.8<br>1.6<br>5.1<br>1.2|
|**Alpha,**<br>(°C-1)<br>Qa||0.00375|0.003850|−100<br>2.9<br>0.8<br>2.4<br>0.6<br>~~ee~~<br>~~eeeeeeeeeEeEeEeEeEEE~~|
|||±0.000029|±0.000010|0<br>2.0<br>0.5<br>1.0<br>0.3|
|**Delta,**<br>(°C)<br>1.605±0.009<br>1.4999±0.007<br>**Beta,**<br>(°C)<br>0.16<br>0.10863<br>**A**(°C-1)<br>3.81×10-3<br>3.908×10-3<br>100<br>2.9<br>0.8<br>2.2<br>0.6<br>200<br>5.6<br>1.6<br>4.3<br>1.2<br>300<br>8.2<br>2.4<br>6.2<br>1.8<br>~~Aa<a~~|||||
|**B**(°C-2)||−6.02×10-7|−5.775×10-7|400<br>11.0<br>3.2<br>8.3<br>2.5|
|**C**(°C-4)||−6.0×10-12|−4.183×10-12|500<br>12.5<br>4.0<br>9.6<br>3.0|
|Both<br>0 and C<br>B =|0 and C<br>=|0 for T>0°C||600<br>15.1<br>4.8<br>10.4<br>3.3<br>*1000<br>RTD. Divide R by 10 for 100<br>RTD.<br>~~a~~<br>a)<br>a<br>rn)|
## **RESISTANCE VS TEMPERATURE CURVE**
## **CAUTION**
## PRODUCT DAMAGE
The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation, take normal ESD precautions when handling this product.
## **SPECIFICATIONS**
|**SPECIFICATIONS**||
|---|---|
|Sensor Type|Thin film platinum RTD:|
||Ro<br>1000<br>@ 0°C; alpha<br>0.00375 / /°C|
||Ro<br>100<br>@ 0°C; alpha<br>0.00385 / /°C<br>=<br>10)<br>=<br>Loe)|
|Temperature Range|HRTS-5760-B:−200°to+260°C (−320°to+500°F)|
||HRTS-61:<br>−75°to+425°C(−100°to+800°F)|
|Temperature Accuracy|±0.5°C or 0.8% of temperature @ 0.2% RoTrim|
||±0.3°C or 0.6% of temperature @ 0.1% RoTrim Optional|
|Time Constant, 1/e|HRTS-5760-B: Typically 0.6 sec. on metal surfaces|
||HRTS-61: Typically20 sec. On metal surfaces|
|Operating Current|2 mA max. for self-heating errors of 1°C|
||1 mA recommended|
|Self-Heating|0.3 mW/°C|
|Lead Material|Nickel coated stranded copper, Teflon or Fiberglass insulated|
**94** Honeywell e MICRO SWITCH Sensing and Control e 1-800-537-6945 USA e+ 1-815-235-6847 International e 1-800-737-3360 Canada Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
**Ultrasonic Sensors** Precision Digital 18 mm Diameter
945 Series
## **FEATURES**
**Background suppression** e Temperature compensation over 0 to Sealed to IP 65 50 ° C (32 to 122 ° F) Fixed or adjustable setpoint control e Inhibit/synchronization input e Stainless steel or plastic housings
## **ORDER GUIDE**
**Sensor Sensing Package Range* Output Catalog Style mm (in.) Setpoint Type Listing** 18 mm dia. 100 - 500 Fixed @ 400 mm (15.75 in.) ± 20 mm** PNP, N.O. 945-F4Y-AD-001 Plastic (3.9 - 19.68) ~~es~~ NPN, N.O. 945-F4Y-AD-002 100 - 200 Fixed @ 200 mm (7.87 in.) ± 20 mm** PNP, N.O. 945-N4Y-AD-001 (3.9 - 7.87) NPN, N.O. 945-N4Y-AD-002 200 - 500 Setpoint adjustment within sensing range PNP, N.O. 945-F4Y-AD-001-180E (7.87 - 19.68) 70 - 180 Setpoint adjustment within sensing range PNP, N.O. 945-F4Y-AD-001-300E 90,7 g ~~» (3.2 oz.) (2.76 - 7.09) ~~ee~~ 18 mm dia. 100 - 500 Setpoint adjustment within sensing range PNP, N.O. 945-L4Y-AD-001 Stainless Steel ~~ep~~ (3.9 - 19.68) ~~es~~ NPN, N.O. 945-L4Y-AD-002 100 - 200 Setpoint adjustment within sensing range PNP, N.O. 945-S4Y-AD-001 (3.9 - 7.87) NPN, N.O. 945-S4Y-AD-002 136 g (4.8 oz.) * Standard target is 120 mm square of mild steel perpendicular to ultrasonic beam. **External setpoint adjustment wiring possible. **SPECIFICATIONS SENSING CHARACTERISTICS Catalog Listings 945-F4Y-AD-001 945-N4Y-AD-001 945-F4Y-AD-001-180E 945-F4Y-AD-001-300E 945-F4Y-AD-002 945-N4Y-AD-002 945-L4Y-AD-001 945-S4Y-AD-001 945-L4Y-AD-002 945-S4Y-AD-002** Max. Sensing Distance 500 mm (19.66 in.) 200 mm (7.87 in.) 500 mm (19.66 in.) 180 mm (7.09 in.) Min. Sensing Distance 100 mm (3.9 in.) 100 mm (3.9 in.) 200 mm (7.87 in.) 70 mm (2.76 in.) Beam Angle 10 ° 10 ° 8 ° 8 ° ~~—_}—___~~ **POWER SUPPLY** Supply Voltage 19 - 30 VDC ~~—~~ Supply Current ~~Coa~~ <30 mA without load ~~[ooo]~~ <25 mA without load Circuit Protection ~~OO~~ Reverse polarity **OUTPUT CHARACTERISTICS** Load Current 0 - 100 mA Hysteresis ~~CoES~~ 10 mm Switching Frequency 30 Hz 60 Hz 25 Hz ~~ee~~ 60 Hz Repeatability ~~eC~~ ± 0.5 mm or 0.3% or reading ±0.2 mm or 0.2% or reading Setpoint Adjustment (Fixed or External Circuit) or 4 Turn Potentiometer Circuit Protection ~~**O** T~~ Short Circuit ~~T~~ **ENVIRONMENTAL** Operating Temperature 0 to 50 ° C (32 to 122 ° F) Storage Temperature ~~TT~~ 0 to 70 ° C (32 to 150 ° F) Sealing ~~TT~~ IP 65 ~~—~~ **SPECIAL FEATURES** Hold Input Stops transmission and reception when input is connected to 0 VDC. Last output will be stored until input is disconnected ~~eS~~ Synchronization Input ~~TT~~ Avoids mutual interference from several sensors. (External synchronization unit is required. See Accessories) ~~fe~~ LED Indicator Illuminates when sensor detects target **B90** Honeywell e MICRO SWITCH Sensing and Control ; 1-800-537-6945 USA - 1-815-235-6847 International | 1-800-737-3360 Canada Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
945 Series
## **Ultrasonic Sensors** Precision Digital 18 mm Diameter
## **WIRING DIAGRAMS 945-F/N Series**
## **945-L/S Series**
*Normal operation with no connection
*Normal operation with no connection
## **MOUNTING DIMENSIONS** (For reference only) **945-F/N Series plastic Housing**
## **945-L/S Series Stainless Steel Housing**
## **ACCESSORIES**
|**ACCESSORIES**|||
|---|---|---|
||**Catalog Listing**|**Features**|
|24 VDC Power supply, relay output, 110 VAC input|FF-MADB24RB|See page B102 for more information|
|24 VDC Power supply, ON/OFF delay, 110 VAC input|FF-MADC24RB|See page B102 for more information|
|Synchronization unit|55000001|Controls up to 100 sensors|
|Mounting clamp, 18 mm housing|43178389-018|Allows mounting to a flat surface|
|Beam deflector|43192871-003|Allows right angle mounting (approx. dim. 50 x 170 mm)|
|Focusing beam deflector|43192871-004|Reduces beam angle byapproximately50%|
Honeywell e MICRO SWITCH Sensing and Control e 1-800-537-6945 USA @+ 1-815-235-6847 International e 1-800-737-3360 Canada
**B91**
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
**Ultrasonic Sensors** Precision Analog 18 mm Diameter
945 Series
## **FEATURES**
ee **Background suppression** Temperature compensation over 0 to e Sealed to IP 65 50 ° C (32 to 122 ° F) e Adjustable sensitivity e Inhibit/synchronization input e Stainless steel or plastic housings
## **ORDER GUIDE**
|**ORDER GUIDE**||||
|---|---|---|---|
|**Sensor**<br>**Package**<br>**Style**|**Sensing**<br>**Range***<br>**mm (in.)**|**Analog**<br>**Output**|**Catalog**<br>**Listing**|
|18 mm dia.<br>Plastic<br>90,7 g (3.2 oz.)|150 - 600<br>(5.9 - 23.6)|1.5 - 6 V|945-F4Y-AD-1C0-180E|
||60 - 200<br>(2.36 - 7.87)|1.8 - 6 V|945-F4Y-AD-1C0-300E|
|18 mm dia.<br>Stainless Steel<br>136 g (4.8 oz.)<br>A<br>(<br>/<br>:<br>)|100 - 600<br>(3.9 - 23.6)<br>A<br>(<br>/<br>:<br>)|1 - 6 V<br>A<br>(<br>/<br>:<br>)|945-L4Y-AD-1C0<br>A<br>(<br>/<br>:<br>)|
|18 mm dia. Plastic with<br>Stainless Steel or Plastic External<br>Head|150 - 600<br>(5.9 - 23.6)|1.5 - 6 V|945-E3Y-AD-1C0-180E<br>(M18 x 1 stainless steel sensor<br>head)|
||30 - 150<br>(1.18 - 5.9)|0.9 - 4.5 V|945-G3Y-AD-1C0-300E<br>(M12 x 1 plastic sensor head)|
|||||
## **SPECIFICATIONS**
|**SPECIFICATIONS**||||||
|---|---|---|---|---|---|
|**Catalog Listings**|**945-F4Y-AD-1C0-180E**<br>~~a~~|**945-F4Y-AD-1C0-300E**<br>~~a~~|**945-L4Y-AD-1C0**<br>~~a~~|**945-E3Y-AD-1C0-180E**<br>~~a~~|**945-G3Y-AD-1C0-300E**<br>~~a~~|
|Max. SensingDistance <br>~~a~~|600 mm(23.6 in.)<br>~~a~~|200 mm(7.87 in.)<br>~~a~~|600 mm(23.6 in.)<br>~~a~~|600 mm(23.6 in.)<br>~~a~~|150 mm(5.9 in.)<br>~~a~~|
|Min. SensingDistance|150 mm(5.9 in.)|60 mm(2.36 in.)|100 mm(3.9 in.)|150 mm(5.9 in.)|30 mm(1.18 in.)|
|Beam Angle|8°|8°|10°|8°|8°|
|**POWER SUPPLY**<br>~~——~~||||||
|SupplyVoltage|19 - 30 VDC|||||
|SupplyCurrent|<20 mA without load|||||
|Circuit Protection<br>~~OO~~|Reversepolarity<br>~~OO~~|||||
|**OUTPUT CHARACTERISTICS**<br>~~OO~~||||||
|Load Current<br>~~OO~~|10 mA max.<br>~~OO~~|||||
|SwitchingFrequency<br>~~TT~~|10 Hz<br>~~TT~~|20 Hz|10 Hz|10 Hz|20Hz|
|Repeatability<br>~~TT~~<br>~~TTT~~|<±0.3% of reading<br>~~TT~~<br>~~TTToo————~~|||||
|Linearity<br>~~TT~~<br>~~TTT~~|<0.2%<br>~~TT~~<br>~~TTToo————~~|||||
|Output Adjustment<br>~~TTT~~|4 turn potentiometer<br>~~TTT oo————~~|||||
|Circuit Protection|Short Circuit|||||
|**ENVIRONMENTAL**<br>~~OT~~||||||
|Operating<br>Temperature<br>~~CT~~|0 to 50°C(32 to 122°F)<br>~~oO~~|||||
|Storage Temperature<br>~~CT~~|0 to 70°C(32 to 158°F)<br>~~oO~~|||||
|Sealing<br>~~CT~~|IP 65<br>~~oO~~|||||
|**SPECIAL FEATURES**<br>~~**T**Tooue,AN-7vNN"}~~||||||
|Hold Input<br>~~**T**~~|Stops transmission and reception of sensor when input is connected to 0 VDC. Analogoutput would be zero VDC<br>~~**T**Tooue,AN-7vNN"}~~|||||
|Synchronous Input<br>~~**T**~~|Avoids mutual interference from several ultrasonic sensors(external synchronization unit is required;see accessories)<br>~~**T**T ooue,AN-7vNN"}~~<br>~~o~~|||||
|LED Indicator|Illuminates when sensor detects a target|||||
**B92** Honeywell e MICRO SWITCH Sensing and Control e 1-800-537-6945 USA e+ 1-815-235-6847 International e 1-800-737-3360 Canada
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
**Ultrasonic Sensors** Precision Analog 18 mm Diameter
945 Series
## **WIRING DIAGRAMS 945-F/L, 945-E/G Series**
*Normal operation with connection to 19-30 VDC
**MOUNTING DIMENSIONS** (For reference only) **945-F/L Series Housing**
## **945-E/G Series with External Head**
|**945-F/L Series Housing**<br>**945-E/G Series with External Head**<br>i|**945-F/L Series Housing**<br>**945-E/G Series with External Head**<br>i|**945-E/G Series with External Head**<br>220.6sox19eo-|**945-E/G Series with External Head**<br>220.6sox19eo-||
|---|---|---|---|---|
|i<br>ae.||220.6 sox19 eo-<br> @ Wm;||Proximity<br> -|
|**ACCESSORIES**|||||
||**Catalog Listing**||**Features**||
|Synchronization unit|55000001||Controls up to 100 sensors||
|Mounting clamp, 18 mm housing|43178389-018||Allows mounting to flat surface||
|Beam deflector|43192871-003||Allows right angle mounting (approx. dim. 50 x 170 mm)||
|Focusing beam deflector|43192871-004||Reduces beam angle by approximately 50%||
## **ACCESSORIES**
Honeywell MICRO SWITCH Sensing and Control 1-800-537-6945 USA 1-815-235-6847 International 1-800-737-3360 Canada
**B93**
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
## 94X Series
## (942-O4N-2D-1A1/1A2-80E, 943-O4V-2D-001/002/1C0/1D0-80E, 947-O4V-2D-1C0/1D0-80E) Ultrasonic Distance Sensors
## **DESCRIPTION**
This collection of ultrasonic devices offers enhanced sensing range capability in a square plastic housing. Available sensor types include programmable, Teach-In, and analogue and fixed output versions.
## **FEATURES**
- Non contact distance sensing for use in non invasive measurement
- Reduced sensitivity to light intensity/reflectivity/opacity of target for enhanced flexibility and certainty of measurement
## **POTENTIAL APPLICATIONS**
- Level measurement
- Presence/absence detection
- Distance measurement
- Detects over much longer distance than other detection methods reducing the need for close proximity to the target
- Extremely long sensing distance (up to 6 m [19.65 ft]) reducing the need for close proximity measurement which can be critical for some applications
## 943 Series (942-O4N-2D-1A1/1A2-80E, 943-O4V-2D-001/002/1C0/1D0-80E, 947-O4V-2D-1C0/1D0-80E)
## **Specifications**
|**Specifications**|||||||||
|---|---|---|---|---|---|---|---|---|
|Parameter|942-O4N-2D-<br>1A1-80E|942-O4N-2D-<br>1A2-80E|943-O4V-2D-<br>001-80E|943-O4V-2D-<br>002-80E|943-O4V-2D-<br>1C0-80E|943-O4V-2D-<br>1D0-80E|947-O4V-2D-<br>1C0-80E|947-O4V-2D-<br>1D0-80E|
|Max. sensingdistance|6000 mm[236.22 in]||||||5000 mm[196.85 in]||
|Min.sensing distance|600mm[23.62 in]||||||500mm[19.69in]||
|Expected response time 90%<br>of final value|250 ms/prog||–||700 ms||400 ms||
|Beam angle|8º||||||10º||
|Switchingfrequency|7 Hz/prog||0.5 Hz||7 Hz/prog||||
|Linearityerror|<0.3%||–||<0.5 %||||
|Hysteresis|prog||~1%||–||||
|Repeatability of measured<br>distance|0.2%||–||0.2%±2 mm [0.08 in]||0.2%||
|Temperature range|-15 °C to 70 °C[-5 °F to 158 °F]||||||||
|Temperature compensation|yes||||||–||
|Operatingvoltage|15 Vdc to 30 Vdc||12 Vdc to 30 Vdc||15Vdcto 30Vdc||24 Vdc ±20%||
|Expected current consumption|100 mA||<80 mA||<35 mA||<40 mA||
|Analogue output|0 V to 10 V/4 mA to 20 mA||–||0 V to 10 V|4 mA to 20 mA|0 V to 10 V|4 mA to 20 mA|
|Analogue output selection by<br>load|load >2 kOhm Uout<br>load<500 Ohm Iout||–||||||
|Switchingoutputs|2 PNP NO/NC|2 NPN NO/NC|2 PNP NO/NC|2 NPN NO/NC|–||||
|Expected output current|100 mA max.||500 mA max.||–||||
|Adjustment|programming||Teach-In||||–||
|Alignment LED<br>Status switching output 1<br>Status switchingoutput 2|green (1)<br>yellow (2)<br>yellow(3)||||–||||
|Control input<br>Inhibit connect to:<br>Synchronisation connect to:<br>Enable connect to:|Pin 6→0 V<br>Pin 6↔Pin 6<br>Pin 6→NC||–||||Pin 2→0 V<br>Pin 2↔Pin 2<br>Pin 2→NC||
|Interface|RS232||–||||||
|Plastic housing|PBPT||||||||
|Sealing*|IP65||||||||
|Connector|8pin M16x0.75||5pin M12x1||||||
*Attention! Do not expose sensor head to hot water >50 °C or steam vapour.
## **Accessories: 942-O4N-2D-1A1/1A2-80E**
|**Catalog Listing**|**Description **|
|---|---|
|66195126-001|Matingconnector straight|
|55000005-002|Programmingadaptor|
|55000010-001|Softwareprogrammingadaptor and PCconnection cable|
|55000018-001|Programmingcable|
## **Accessories: 943-O4V-2D-001/002-80E, 943-O4V-2D-1C0/1D0-80E, 947-O4V-2D-1C0/1D0-80E**
|**Catalog Listing**|**Description**|
|---|---|
|66195044-001|Mating connectorstraight|
|66195045-001|Matingconnector angled|
|66195214-001|Straight cable/connector 2 m|
|66195216-001|Right-angle cable/connector 2 m|
www.honeywell.com/sensing
2
## Ultrasonic Distance Sensors
**Mounting Dimensions (For reference only. mm/[in])**
## **942-O4N-2D-1A1/1A2-80E**
**==> picture [149 x 17] intentionally omitted <==**
**----- Start of picture text -----**<br>
943-O4V-2D-001/002/1C0/1D0-80E,<br>947-O4V-2D-1C0/1D0-80E<br>**----- End of picture text -----**<br>
## **Wiring**
## **P42-O4N-2D-1A1/1A2-80E**
## **943-O4V-2D-001-80E**
View to solder pins of connector
**==> picture [443 x 242] intentionally omitted <==**
**----- Start of picture text -----**<br>
KI Pin 1 !! +24 Vdc<br>Pin 5 l<br>Pin 1: + 24 Vdc ! Teach-In<br>2 Pin 2: GND Pin 4 ! Switching output SP1 4 3<br>5 4<br>3 8 1 Pin 3: U/I Pin 4: SP1 Pin 2 ! Switching output SP2 R 1 5 2<br>7 6<br>Pin 5: SP2 ll R H (2)<br>Pin 6: Hld/Sync Pin 3 | 0 V<br>Pin 7: RxD<br>Pin 8: TxD<br>943-O4V-2D-1C0/1D0-80E<br>Pin 1 ! +24 Vdc<br>!<br>Pin 2 \ Switching output 2 Load i Pin 1 +24 V<br>| Load 4 3<br>Pin 4 Switching output 1g output 1 output 1put 1ut 1 4 3 Pin 4 Analogue 5<br>| 1 2<br>5<br>Pin 5 I Teach-In 1 2 | Pin 5 Teach-In<br>] Pin 3 dh 0 V/GND<br>| . ————<br>**----- End of picture text -----**<br>
## **943-O4V-2D-002-80E**
**==> picture [487 x 235] intentionally omitted <==**
**----- Start of picture text -----**<br>
Pin 1 ! +24 Vdc<br>!<br>Pin 2 \ Switching output 2 Load i Pin 1 +24 V<br>| Load 4 3<br>Pin 4 Switching output 1g output 1 output 1put 1ut 1 4 3 Pin 4 Analogue 5<br>| 1 2<br>5<br>Pin 5 I Teach-In 1 2 | Pin 5 Teach-In<br>] Pin 3 dh 0 V/GND<br>| . ————<br>es Pin 3 0 V<br>947-O4V-2D-1C0-80E 947-O4V-2D-1D0-80E<br>KI Pin 1 |l +24 Vdc<br>10 V 20 mA<br>Pin 4 I<br>b! Analogue output<br>1!ot-----—~ ~~ \ 4 3<br>Pin 2 |I., EnableSynchronisation \ 1 2 0 V 4 mA 500 mm 5000 mm<br>Inhibit | 500 mm 5000 mm<br>| !<br>rn ree<br>Pin 3 | 0 V<br>**----- End of picture text -----**<br>
## **947-O4V-2D-1C0/1D0-80E**
Honeywell Sensing and Control
3
## **Detection Range**
**942-O4N-2D-1A1/1A2-80E, 943-04V-2D-001/002/1C0/1D0-80E**
## **947-04V-2D-1C0/1D0-80E**
**==> picture [191 x 102] intentionally omitted <==**
**----- Start of picture text -----**<br>
+1000<br>mm<br>-1000<br> 0 600 6000<br>mm<br>Enhanced detection of a target 100 mm² x 100 mm²<br>Possible detection of a large target<br>**----- End of picture text -----**<br>
**==> picture [180 x 94] intentionally omitted <==**
**----- Start of picture text -----**<br>
+600<br>mm<br>-600<br> 0 500 5000<br>mm<br>Enhanced detection of a target 100 mm² x 100 mm²<br>Possible detection of a large target<br>**----- End of picture text -----**<br>
## **[WARNING ]**
## **PERSONAL INJURY**
DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury.
**Failure to comply with these instructions could result in death or serious injury.**
## **WARNING**
## **MISUSE OF DOCUMENTATION**
- The information presented in this product sheet is for reference only. Do not use this document as a product installation guide.
- Complete installation, operation, and maintenance information is provided in the instructions supplied with each product.
**Failure to comply with these instructions could result in death or serious injury.**
## **WARRANTY/REMEDY**
Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. **The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.**
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
## **SALES AND SERVICE**
Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or:
**E-mail:** info.sc@honeywell.com
**Internet:** www.honeywell.com/sensing
## **Phone and Fax:**
Asia Pacific +65 6355-2828 +65 6445-3033 Fax Europe +44 (0) 1698 481481 +44 (0) 1698 481676 Fax Latin America +1-305-805-8188 +1-305-883-8257 Fax USA/Canada +1-800-537-6945 +1-815-235-6847 +1-815-235-6545 Fax
## **Automation and Control Solutions**
Sensing and Control Honeywell 1985 Douglas Drive North Minneapolis, MN 55422 www.honeywell.com/sensing
004451-1-EN IL50 GLO Printed in USA February 2006 Copyright © 2006 Honeywell International Inc. All rights reserved.
## 943 Series Ultrasonic Distance Sensors ~~:~~
The new 943 series industrial sensors are the latest addition to our product range. They have improved scanning ranges, remote teach in of the switching or analog outputs, as well as new advanced features, such as window and hysteresis modes.
## _**M30**_
## _**CONNECTOR**_
**==> picture [160 x 102] intentionally omitted <==**
**----- Start of picture text -----**<br>
5,0 11,2<br>CABLE<br>123,5 ±0,5<br>5,0 90 ±0,5 2000 ± 100<br>V<_ --<br>M30 x 1,5<br>M30 x 1,5<br>**----- End of picture text -----**<br>
## _**M18**_
**==> picture [32 x 62] intentionally omitted <==**
**----- Start of picture text -----**<br>
CONNECTOR<br>3,5<br>CABLE<br>**----- End of picture text -----**<br>
_**M18/M30 Termination:**_ Connector M12 x 1 Cable Preleaded 2 m
## **! WARNING**
## **MISUSE OF DOCUMENTATION**
- The information presented in this product sheet (or catalogue) is for reference only. DO NOT USE this document as product installation information.
- Complete installation, operation and maintenance information is provided in the instructions supplied with each product.
- **Failure to comply with these instructions could result in death or serious injury.**
## _**OPTIONS AND ORDER GUIDE**_
## _**Analogue voltage output 0-10 V and 4-20 mA**_
## _**2 switching outputs PNP NO and NPN NO**_
_**Beam angle:**_ 8° _**Supply voltage:**_ 15 to 30 V _**Sealing:**_ IP67
_**Beam angle:**_ 8° _**Supply voltage:**_ 12 to 30 V _**Sealing:**_ IP67
## _**M30**_
## _**M30**_
|**_M30_**|**_M30_**|
|---|---|
|**_Housing:_**<br>M30 x 1,5 mm plastic (PBTB)||
|**_Max. sensing distance:_**|3500 mm|
|**_Min. sensing distance:_**|300 mm|
|**_Response time:_**<br>**_Repeatability:_**|400 ms<br>0,2 % or ±2 mm|
|**_OUTPUT_**<br>**_TERMINATION_**|**_REFERENCE_**|
|0-10 V<br>Connector|943-T4V-2D-1C0-130E|
|0-10 V<br>Cable|943-T4Y-2D-1C0-130E|
|4-10 mA<br>Connector<br>4-20 mA<br>Cable|943-T4V-2D-1D0-130E<br>943-T4Y-2D-1D0-130E|
|**_M30_**|**_M30_**|
|---|---|
|**_Housing:_**<br>M30 x 1,5 mm plastic (PBTB)||
|**_Max. sensing distance:_**|3500 mm|
|**_Min. sensing distance:_**|300 mm|
|**_Switching frequency:_**<br>**_Repeatability:_**|1.0 Hz<br>0,2 % or 2 mm|
|**_OUTPUT_**<br>**_TERMINATION_**|**_REFERENCE_**|
|PNP, 2 NO/NC<br>Connector|943-T4V-2D-001-130E|
|PNP, 2 NO/NC<br>Cable|943-T4Y-2D-001-130E|
|NPN, 2 NO/NC<br>Connector<br>NPN, 2 NO/NC<br>Cable|943-T4V-2D-002-130E<br>943-T4Y-2D-002-130E|
## _**M18**_
## _**M18**_
|**_M18_**|**_M18_**|**_M18_**|**_M18_**|
|---|---|---|---|
|**_Housing:_**<br>M18 x 1,0 mm plastic (PBTB)||**_Housing:_**<br>M18 x 1,0 mm plastic (PBTB)||
|**_Max. sensing distance:_**|2000 mm|**_Max. sensing distance:_**|2000 mm|
|**_Min. sensing distance:_**<br>**_Switching frequency:_**|200 mm<br>1.2 Hz|**_Min. sensing distance:_**<br>**_Switching frequency:_**|200 mm<br>250 ms|
|**_Repeatability:_**|0,2 % or 2 mm|**_Repeatability:_**|0,2 % or ±2 mm|
|**_OUTPUT_**<br>**_TERMINATION_**|**_REFERENCE_**|**_OUTPUT_**<br>**_TERMINATION_**|**_REFERENCE_**|
|PNP, 2 NO/NC<br>Connector|943-F4V-2D-001-180E|0-10 V<br>Connector|943-F4V-2D-1C0-180E|
|PNP, 2 NO/NC<br>Cable|943-F4Y-2D-001-180E|0-10 V<br>Cable|943-F4Y-2D-1C0-180E|
|NPN, 2 NO/NC<br>Connector|943-F4V-2D-002-180E|4-10 mA<br>Connector|943-F4V-2D-1D0-180E|
|NPN, 2 NO/NC<br>Cable|943-F4Y-2D-002-180E|4-20 mA<br>Cable|943-F4Y-2D-1D0-180E|
|**_Max. sensing distance:_**|800 mm|**_Max. sensing distance:_**|800 mm|
|**_Min. sensing distance:_**<br>**_Switching frequency:_**<br>**_Repeatability:_**<br>**_OUTPUT_**<br>**_TERMINATION_**|100 mm<br>4.7 Hz<br>0,2 % or 1 mm<br>**_REFERENCE_**|**_Min. sensing distance:_**<br>**_Switching frequency:_**<br>**_Repeatability:_**<br>**_OUTPUT_**<br>**_TERMINATION_**|100 mm<br>100 ms<br>0,2 % or ±1 mm<br>**_REFERENCE_**|
|PNP, 2 NO/NC<br>Connector|943-F4V-2D-001-300E|0-10 V<br>Connector|943-F4V-2D-1C0-300E|
|PNP, 2 NO/NC<br>Cable|943-F4Y-2D-001-300E|0-10 V<br>Cable|943-F4Y-2D-1C0-300E|
|NPN, 2 NO/NC<br>Connector|943-F4V-2D-002-300E|4-10 mA<br>Connector|943-F4V-2D-1D0-300E|
|NPN, 2 NO/NC<br>Cable|943-F4Y-2D-002-300E|4-20 mA<br>Cable|943-F4Y-2D-1D0-300E|
|**_Max. sensing distance:_**<br>**_Min. sensing distance:_**|500 mm<br>60 mm|**_Max. sensing distance:_**<br>**_Min. sensing distance:_**|500 mm<br>60 mm|
|**_Switching frequency:_**|4.7 Hz|**_Switching frequency:_**|100 ms|
|**_Repeatability:_**|0,2 % or 1 mm|**_Repeatability:_**|0,2 % or ±1 mm|
|**_OUTPUT_**<br>**_TERMINATION_**<br>PNP, 2 NO/NC<br>Connector|**_REFERENCE_**<br>943-F4V-2D-001-330E|**_OUTPUT_**<br>**_TERMINATION_**<br>0-10 V<br>Connector|**_REFERENCE_**<br>943-F4V-2D-1C0-330E|
|PNP, 2 NO/NC<br>Cable<br>NPN, 2 NO/NC<br>Connector|943-F4Y-2D-001-330E<br>943-F4V-2D-002-330E|0-10 V<br>Cable<br>4-10 mA<br>Connector|943-F4Y-2D-1C0-330E<br>943-F4V-2D-1D0-330E|
|NPN, 2 NO/NC<br>Cable|943-F4Y-2D-002-330E|4-20 mA<br>Cable|943-F4Y-2D-1D0-330E|
## **! WARNING**
## **PERSONAL INJURY**
DO NOT USE these products as safety or emergency stop devices, or in any other application where failure of the product could result in personal injury.
**Failure to comply with these instructions could result in death or serious injury.**
## Sensing and Control
## _**Warranty/Remedy**_
Honeywell warrants goods of its manufacture as being free of defective material and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. _**The foregoing is Buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose.**_
## _**Sales and Service**_
Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorised Distributor, contact your local sales office or:
INTERNET: www.honeywell.com/sensing E-mail: info.sc@honeywell.com
While we provide application assistance, personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
## _**NORTH AMERICA**_
## _**ASIA PACIFIC**_
## _**EUROPE**_
## _**South Korea**_
## _**Spain**_
## _**Italy**_
## _**Control Products**_
## _**Austria**_
_**USA/Canada**_ Honeywell S.p.A. Honeywell S.A. Honeywell Phone: +(39) 02 92146 450/456 Phone: +(34) 91 313 6100 Sensing and Control FAX: +(39) 02 92146 490 FAX: +(34) 91 313 6129 Phone: 1-800-537-6945 1-815-235-6847 _**The Netherlands Sweden**_ FAX: 1-815-235-6545 Honeywell B.V. Honeywell AB E-mail: Phone: +(31) 20 565 69 11 Phone: +(46) 8 775 55 00 info.sc@honeywell.com FAX: +(31) 20 565 66 00 FAX: +(46) 8 775 56 00 _**Norway Switzerland LATIN AMERICA**_
Honeywell Korea Co Ltd Phone: +(822) 799-6167 FAX: +(822) 792-9013
Honeywell Austria GmbH Phone: +(43) 1 727 80 366/246 FAX: +(43) 1 727 80 337
_**Asia Pacific Headquarters**_ Phone: +(65) 6355-2828 FAX: +(65) 6445-3033
_**Malaysia**_
_**Australia**_
## _**Belgium**_
Honeywell Limited Honeywell Engineering Sdn Bhd Phone: +(61) 2-9370-4500 Phone: +(60-3) 7958-4988 FAX: +(61) 2-9370-4525 FAX: +(60-3) 7958-8922 Toll Free 1300-36-39-36 Toll Free Fax: 1300-36-04-70 _**New Zealand**_
Honeywell SA/NV Phone: +(32) 2 728 2522 FAX: +(32) 2 728 2502
Toll Free Fax: 1300-36-04-70 _**New Zealand Bulgaria Norway Switzerland LATIN AMERICA**_ Honeywell Limited Honeywell EOOD Honeywell A/S Honeywell AG _**China – PRC - Beijing**_ Phone: +(64-9) 623-5050 Phone: +(359) 2 979 00 23 Phone: +(47) 66 76 20 00 Phone: +(41) 1 855 24 40 Honeywell China Inc. FAX: +(64-9) 623-5060 FAX: +(359) 2 979 00 24 FAX: +(47) 66 76 20 90 FAX: +(41) 1 855 24 45 _**Honeywell Latin America**_ Phone: +(86-10) 8458-3280 Toll Free (0800) 202-088 _**Headquarters**_ FAX: +(86-10) 8458-3102 _**Czech Republic Poland Turkey**_ Phone: 1-305-805-8188 _**Philippines**_ Honeywell spol. s.r.o. Honeywell Sp. zo.o Honeywell Turkey A.S. FAX: 1-305-883-8257 _**China – PRC - Shanghai**_ Honeywell Systems Phone: +(420) 242 442 111 Phone: +(48) 606 09 64 Phone: +(90) 216 5756620 Honeywell China Inc. (Philippines) Inc. FAX: +(420) 242 442 182 FAX: +(48) 606 09 01 FAX: +(90) 216 5756637 _**Argentina**_ Phone: (86-21) 6237-0237 Phone: +(63-2) 636-1661/1662 Honeywell S.A.I.C. FAX: (86-21) 6237-1237 FAX: +(63-2) 638-4013 _**Denmark Portugal Ukraine**_ Phone: +(54-11) 4383-3627 Honeywell A/S Honeywell Portugal Lda Honeywell FAX: +(54-11) 4325-6470 _**China - Hong Kong S.A.R. Singapore**_ Phone: +(45) 39 55 55 55 Phone: +(351 21) 424 50 00 Phone: +(380) 44 201 44 74 Honeywell Ltd. Honeywell South East Asia FAX: +(45) 39 55 55 58 FAX: +(351 21) 424 50 99 FAX: +(380) 44 201 44 75 _**Brazil**_ Phone: +(852) 2953-6412 Phone: +(65) 6355-2828 Honeywell Do Brasil & Cia FAX: +(852) 2953-6767 FAX: +(65) 6445-3033 _**Finland Romania United Kingdom**_ Phone: +(55-11) 4166-1900 Honeywell OY Honeywell Bucharest Honeywell Control Systems FAX: +(55-11) 4166-1901 _**Indonesia Thailand**_ Phone: +(358) 9 3480101 Phone: +(40) 21 231 64 37/38 Ltd Honeywell Indonesia Pte Ltd. Honeywell Systems (Thailand) FAX: +(358) 9 34801375 FAX: +(40) 21 231 6439 Phone: +(44) 1698 481481 _**Chile**_ Phone: +(62) 21-535-8833 Ltd. FAX: +(44) 1698 481676 Honeywell Chile, S.A. FAX: +(62) 21-5367 1008 Phone: +(662) 693-3099 _**France Commonwealth of**_ Phone: +(56-2) 425-8400 FAX: +(662) 693-3085 Honeywell SA _**Independent States (CIS) Mediterranean & African**_ FAX: +(56-2) 425-8410 _**India**_ Phone: +(33) 1 60 19 80 40 Z.A.O. Honeywell _**Distributors**_ TATA Honeywell Ltd. _**Taiwan R.O.C.**_ FAX: +(33) 1 60 19 81 73 Phone: +(7 095) 796 98 36 Honeywell SpA _**Mexico**_ Phone: +(91) 20 6870 445/446 Honeywell Taiwan Ltd. FAX: +(7 095) 797 99 06 Phone: +(39) 2 921 46 232 Honeywell S.A. de C.V. FAX: +(91) 20 681 2243/ 687 5992 Phone: +(886-2) 2245-1000 _**Germany**_ FAX: +(39) 2 921 46 233 Phone: +(52) 55 5081-0200 FAX: +(886-2) 2245-3241 Honeywell AG _**Slovak Republic**_ FAX: +(52) 55 5081-0202 _**Japan**_ Phone: +(49) 69 8064 444 Honeywell s.r.o. _**Middle East Headquarters**_ Honeywell Inc FAX: +(49) 69 8064 442 Phone: +(421 2) 58 247 403 Honeywell Middle East Ltd. _**Puerto Rico, Caribbean**_ Phone: +(81) 3 5440 1425 FAX: +(421 2) 58 247 415 Phone: +(9712) 443 2119 Honeywell Inc. FAX: +(81) 3 5440 1368 _**Hungary**_ FAX +(9712) 443 2536 Phone: +(787) 792-7075 Honeywell Kft. _**South Africa (Republic of)**_ FAX: +(787) 792-0053 Phone: +(361) 451 43 00 Honeywell Southern Africa FAX: +(361) 451 43 43 Honeywell S.A. Pty. Ltd _**Venezuela**_ Phone: +(27) 11 695 8000 Honeywell C.A. FAX +(27) 11 805 1504 Phone: +(58-212) 273-0511 FAX: +(58-212) 273-0599
This publication does not constitute a contract between Honeywell and its customers. The contents may be changed at any time without notice. It is the customer’s responsibility to ensure safe installation and operation of the products. Detailed mounting drawings of all products illustrated are available on request. Copyright 2004 Honeywell International Inc. All Rights Reserved.
**Sensing and Control www.honeywell.com/sensing** Honeywell Control Systems Ltd Newhouse Industrial Estate Motherwell, Lanarkshire ML1 5SB Scotland, UK 100464-EN Issue 1 02/04 UK07 GLO
## 943 Series (943F4V/F4Y-2D001/002/1C0/1D0-360E) Ultrasonic Distance Sensors
## **DESCRIPTION**
The new 943-F4V (connector) and 943-F4Y (cable) Series industrial sensors are the latest additions to our range of ultrasonic distance sensors. They offer improved scanning ranges and remote Teach-In of the switching or analog outputs, in addition to new, advanced features, such as Window and Hysteresis modes. The devices are Teach-In compatible and have an M18 plastic housing.
## **FEATURES**
- Non contact distance sensing for use in non invasive measurement
- Reduced sensitivity to light intensity/reflectivity/opacity of target for enhanced flexibility and certainty of measurement
- Detects over much longer distance than other detection methods reducing the need for close proximity to the target
## **POTENTIAL APPLICATIONS**
- Reel diameter measurement
- Tank level measurement
- Presence/absence of an object
- Loop control
- Product height measurement
- Tire manufacturing
- Presence absence, tank fill level and diameter measurement provides an extremely robust and flexible measurement method
- Short distance (in ultrasonic terms) for enhanced accuracy, repeatability (material independent) measurement to 30 mm [1.18 in].
-
## **943 Series (943-F4V/F4Y-2D-001/002/1C0/1D0-360E)**
## **Specifications**
|**Specifications**|||||||||
|---|---|---|---|---|---|---|---|---|
|**Parameter**|**943-F4V-2D-**<br>**001-360E**|**943-F4V-2D-**<br>**002-360E**|**943-F4V-2D-**<br>**1C0-360E**|**943-F4V-2D-**<br>**1D0-360E**|**943-F4Y-2D-**<br>**001-360E**|**943-F4Y-2D-**<br>**002-360E**|**943-F4Y-2D-**<br>**1C0-360E**|**943-F4Y-2D-**<br>**1D0-360E**|
|Max.sensing distance|400mm[15.75in]||||||||
|Min.sensing distance|30mm[1.18in]||||||||
|Expected response<br>time 90% of final value|–||60 ms||–||60 ms||
|Beamangle|8º||||||||
|Switchingfrequency|15Hz||–||15Hz||–||
|Linearity error|–||<0.5%||–||<0.5%||
|Hysteresis|1%||–||1%||–||
|Repeatability of<br>measured distance|±1 mm [0.039 in] ±0.2%||||||||
|Temperaturerange|-15°C to70°C [-5°Fto158°F]||||||||
|Temperature<br>compensation|yes||||||||
|Operatingvoltage|12 Vdc to30Vdc||15Vdc to30Vdc||12 Vdc to30Vdc||15Vdc to30Vdc||
|Possiblemin.supply|–||12 Vdc||–||12 Vdc||
|Expected current<br>consumption|<80 mA||<40 mA||<80 mA||<40 mA||
|Output|2X PNP NO/NC|2X NPN NO/NC|0 V to 10 V|4 mA to 20 mA|2X PNP NO/NC|2X NPN NO/NC|0 V to 10 V|4 mA to 20 mA|
|Expected output<br>current|500 mA max.||–||500 mA max.||–||
|Adjustment set point|Teach-In||–||Teach-In||–||
|Teach-In input|pin5||||pink wire||||
|Sensitivity<br>Teach-In: P1/P2<br>determines output<br>position|–||Teach-In||–||Teach-In||
|Plastichousing|PBPT M18x1||||||||
|Sealing*|IP65||||||||
|Connector|M12x1||||–||||
|Cable connection|–||||2 m[6.56 ft]||||
*Attention! Do not expose sensor head to hot water >50 °C or steam vapour.
## **Accessories: 943-F4V-2D-001/002/1CO/1DO-360E**
|**Catalog Listing**|**Description**|
|---|---|
|66195044-001|Mating connectorstraight|
|66195045-001|Mating connector angled|
|66195214-001|Straight cable/connector 2 m|
|66195216-001|Right-angle cable/connector 2 m|
|43178389-018|Mounting clamp|
|43192871-003|Beamdeflector|
|43192871-004|Focusingbeam deflector|
## **Accessories: 943-F4Y-2D-001/002/1CO/1DO-360E**
|**Catalog Listing**|**Description **|
|---|---|
|43178389-018|Mounting clamp|
|43192871-003|Beamdeflector|
|43192871-004|Focusingbeam deflector|
2 www.honeywell.com/sensing
## Ultrasonic Distance Sensors
**Mounting Dimensions Continued (For reference only. mm/[in])**
**==> picture [150 x 8] intentionally omitted <==**
**----- Start of picture text -----**<br>
943-F4V-2D-001/002/1C0/1D0-360E<br>**----- End of picture text -----**<br>
**943-F4Y-2D-001/002/1C0/1D0-360E**
## **Wiring**
**==> picture [461 x 239] intentionally omitted <==**
**----- Start of picture text -----**<br>
943-F4V-2D-001-360E 943-F4V-2D-002-360E<br>Pin 1 +24 Vdc Pin 1 +24 Vdc<br>Pin 5 R R<br>Teach-In 4 3<br>Pin 4 Switching output SP1<br>5<br>Pin 4 Switching output SP1 4 3 1 2<br>5 Pin 2 Switching output SP2<br>Pin 2 Switching output SP2 1 2<br>R<br>Pin 5<br>Teach-In<br>R<br>Pin 3 0 V Pin 3 0 V<br>943-F4V-2D-1C0/1D0-360E 943-F4Y-2D-001/002-360E<br>Pin 1 +24 V Brown +24 Vdc<br>4 3<br>R R<br>Pin 4 Analogue 5 Black SP1<br>1 2<br>Pin 5 Teach-In<br>Grey SP2<br>Pin 3 0 V/GND<br>Pink Teach-In<br>Blue 0 V<br>**----- End of picture text -----**<br>
**==> picture [194 x 87] intentionally omitted <==**
**----- Start of picture text -----**<br>
943-F4Y-2D-1C0/1D0-360E<br>Brown +24 V<br>Black Analogue<br>Pink Teach-In<br>Blue 0 V/GND<br>**----- End of picture text -----**<br>
**==> picture [202 x 103] intentionally omitted <==**
**----- Start of picture text -----**<br>
Detection Range<br>+130<br>mm<br>-130<br> 0 30 400<br>mm<br>Enhanced detection of a target 100 mm² x 100 mm²<br>Possible detection of a large target<br>**----- End of picture text -----**<br>
Honeywell Sensing and Control
3
## **[WARNING ]**
## **PERSONAL INJURY**
DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury.
**Failure to comply with these instructions could result in death or serious injury.**
## **WARRANTY/REMEDY**
Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. **The**
**foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.**
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
## **WARNING**
## **MISUSE OF DOCUMENTATION**
- The information presented in this product sheet is for reference only. Do not use this document as a product installation guide.
- Complete installation, operation, and maintenance information is provided in the instructions supplied with each product.
**Failure to comply with these instructions could result in death or serious injury.**
## **SALES AND SERVICE**
Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or:
**E-mail:** info.sc@honeywell.com
**Internet:** www.honeywell.com/sensing
## **Phone and Fax:**
Asia Pacific +65 6355-2828 +65 6445-3033 Fax Europe +44 (0) 1698 481481 +44 (0) 1698 481676 Fax Latin America +1-305-805-8188
+1-305-883-8257 Fax USA/Canada +1-800-537-6945 +1-815-235-6847 +1-815-235-6545 Fax
## **Automation and Control Solutions**
Sensing and Control Honeywell 1985 Douglas Drive North Minneapolis, MN 61032 www.honeywell.com/sensing
004452-1-1-EN IL50 GLO Printed in USA February 2006 Copyright © 2006 Honeywell International Inc. All rights reserved.
## 943 Series (943-G4V2G-001/002-400E) Ultrasonic Distance Sensors
## **DESCRIPTION**
The new 943-G4V series industrial sensors are the latest addition to our range of ultrasonic distance sensors. They offer improved scanning ranges and remote Teach-In of the switching or analogue outputs, in addition to new, advanced features, such as Window and Hysteresis modes. The devices are Teach-In compatible and have an M12 stainless steel housing for the 943 G4V.
## **FEATURES**
- Non contact distance sensing for use in non invasive measurement
- Reduced sensitivity to light intensity/reflectivity/opacity of target for enhanced flexibility and certainty of measurement
- Detects over much longer distance than other detection methods reducing the need for close proximity to the target
## **POTENTIAL APPLICATIONS**
- Reel diameter measurement
- Tank level measurement
- Presence/absence of an object
- Loop control
- Product height measurement
- Tire manufacturing
- Short distance (in ultrasonic terms) for accuracy, repeatability (material independent) measurement to 25 mm [0.98 in].
## **943 Series (943-G4V-2G-001/002-400E)**
## **Specifications**
|**Specificationspecificationsecifications**|||
|---|---|---|
|**Parameter**|**943-G4V-2G-001-400E **|**943-G4V-2G-002-400E **|
|Max. sensingdistance|250mm[9.84 in]||
|Min.sensing distance|25mm[0.98in]||
|Switchingfrequency|30Hz||
|Hysteresis|1%||
|Beam angle|8°||
|Repeatability|0,3mm[0.012 in]||
|Temperature range|-20°Cto 70°C [-4 °F to 158°F]||
|Operatingvoltage|10Vdc to 30Vdc||
|Expected current consumption|<100mA||
|Output|PNP NO/NC|NPN NO/NC|
|Expected output current|100mA max.||
|Adjustment set point|Teach-In||
|Stainless steel housing|M12x1||
|Sealing*|IP65||
|Connector|M12x1||
*Attention! Do not expose sensor head to hot water >50 °C or water vapour.
**Accessories**
|**Catalog Listing**<br>66195044-001<br>66195045-001<br>~~——~~|**Description **<br>Matingconnector straight<br>Matingconnector angled|
|---|---|
**Mounting Dimensions (For reference only. mm/[in])**
2 www.honeywell.com/sensing
## Ultrasonic Distance Sensors
## **Wiring**
**==> picture [282 x 168] intentionally omitted <==**
**----- Start of picture text -----**<br>
Pin 1<br>+24 V<br>R<br>4 3<br>Pin 4<br>1 2<br>Pin 2<br>Teach-In<br>Pin 3<br>0 V<br>**----- End of picture text -----**<br>
## **Detection Range**
**==> picture [220 x 116] intentionally omitted <==**
**----- Start of picture text -----**<br>
+15<br>mm<br>- 15<br> 0 25 200<br>mm<br>Enhanced detection of a target 100 mm² x 100 mm²<br>Possible detection of a large target<br>**----- End of picture text -----**<br>
Honeywell Sensing and Control 3
## **[WARNING ]**
## **PERSONAL INJURY**
DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury.
**Failure to comply with these instructions could result in death or serious injury.**
## **WARRANTY/REMEDY**
Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. **The**
**foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.**
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
## **WARNING**
## **MISUSE OF DOCUMENTATION**
- The information presented in this product sheet is for reference only. Do not use this document as a product installation guide.
- Complete installation, operation, and maintenance information is provided in the instructions supplied with each product.
**Failure to comply with these instructions could result in death or serious injury.**
## **SALES AND SERVICE**
Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or:
**E-mail:** info.sc@honeywell.com
**Internet:** www.honeywell.com/sensing
## **Phone and Fax:**
Asia Pacific +65 6355-2828 +65 6445-3033 Fax Europe +44 (0) 1698 481481 +44 (0) 1698 481676 Fax Latin America +1-305-805-8188
+1-305-883-8257 Fax USA/Canada +1-800-537-6945 +1-815-235-6847 +1-815-235-6545 Fax
## **Automation and Control Solutions**
Sensing and Control Honeywell 1985 Douglas Drive North Minneapolis, MN 55422 www.honeywell.com/sensing
004449-1-EN IL50 GLO Printed in USA February 2006 Copyright © 2006 Honeywell International Inc. All rights reserved.
## 943 Series (943-K4U2G-001/002/1C0-400E) Ultrasonic Distance Sensors
## **DESCRIPTION**
The new 943-K4U series industrial sensors are the latest addition to our range of ultrasonic distance sensors. They offer improved scanning ranges and remote Teach-In of the switching or analogue outputs, in addition to new, advanced features, such as Window and Hysteresis modes. The devices are Teach-In compatible and have a plastic housing.
## **FEATURES**
- Non contact distance sensing for use in non invasive measurement
- Reduced sensitivity to light intensity/reflectivity/opacity of target for enhanced flexibility and certainty of measurement
- Detects over much longer distance than other detection methods reducing the need for close proximity to the target
## **POTENTIAL APPLICATIONS**
- Level measurement in small containers/test tubes
- Small object detection in narrow environments
- Presence detection
- Winding/unwinding control
- Height/thickness measurement
- Parts counting
- Presence absence, tank fill level and diameter measurement provide an extremely robust and flexible measurement method
- Miniature form factor device fits into the smallest mounting positions
- Two mounting methods provide flexibility of mounting options to suit the application
|**Parameter**<br>~~es~~<br>~~===~~|**943-K4U-2G-001-400E **<br>~~es~~<br>~~===~~|**943-K4U-2G-002-400E **<br>~~es~~<br>~~===~~|**943-K4U-2G-1C0-400E**<br>~~es~~<br>~~===~~|
|---|---|---|---|
|Max. sensingdistance<br>~~===~~|250mm[9.84 in]<br>~~===~~|||
|Min. sensingdistance<br>~~===~~<br>~~rn~~|25mm[0.98in]<br>~~===~~<br>~~rn~~|||
|Switchingfrequency<br>~~===~~<br>~~rs~~|25Hz<br>~~===~~<br>~~rs~~||–<br>~~===~~<br>~~rs~~|
|Linearityerror<br>~~===~~<br>~~rs~~|–<br>~~===~~<br>~~rs~~||<0.3%<br>~~===~~<br>~~rs~~|
|Hysteresis<br>~~===~~<br>~~en~~|2%<br>~~===~~<br>~~en~~||–<br>~~===~~<br>~~en~~|
|Repeatability of measured distance<br>~~===~~|-<br>~~===~~||±0.2 mm [0.008 in]<br>±0.2%<br>~~===~~|
|Beam angle<br>~~===~~<br>~~rs~~|8°<br>~~===~~<br>~~rs~~|||
|Temperature range<br>~~===~~<br>~~rs~~<br>~~a~~|-25°Cto 70°C [-13°F to 158°F]<br>~~===~~<br>~~rs~~<br>|||
|Temperature compensation<br>~~===~~<br>~~a~~|yes<br>~~===~~<br>|||
|Operatingvoltage<br>~~===~~<br>~~ats~~|10Vdc to30Vdc<br>~~===~~<br>~~ts~~||12 Vdc to30Vdc<br>~~===~~<br>~~ts~~|
|Expected current consumption<br>~~===~~<br>~~rn~~|<100mA<br>~~===~~<br>~~rn~~<br>~~rs~~|||
|Output<br>~~===~~<br>~~re~~|PNP NO/NC<br>~~===~~<br>~~re~~<br>~~rs~~|NPN NO/NC<br>~~===~~<br>~~re~~|0V to 10V<br>~~===~~<br>~~re~~|
|Expected output current<br>~~===~~<br>~~rn~~<br>~~Ce~~|100mA max.<br>~~===~~<br>~~rs~~<br>~~rn~~<br>||–<br>~~===~~<br>~~rn~~<br>|
|Adjustment setpoint<br>~~===~~<br>~~Ce~~|Teach-In<br>~~===~~<br>||–<br>~~===~~<br>|
|Adjustment<br>~~===~~<br>~~Ceen~~|–<br>~~===~~<br>~~en~~||Teach-In<br>~~===~~<br>~~en~~|
|Housingmaterial<br>~~===~~<br>~~rn~~|plastic<br>~~===~~<br>~~rn~~|||
|Sealing*<br>~~===~~<br>~~rs~~|IP67<br>~~===~~<br>~~rs~~|||
|Connector<br>~~===~~<br>~~en~~|M8<br>~~===~~<br>~~en~~|||
2 www.honeywell.com/sensing
## Ultrasonic Distance Sensors
## **Wiring**
**==> picture [498 x 315] intentionally omitted <==**
**----- Start of picture text -----**<br>
943-K4U-2G-001-400E 943-K4U-2G-002-400E 943-K4U-2G-1C0-400E<br>Pin 1 Pin 1 +24 V Pin 1 +24 V<br>+24 V 2 4 2 4<br>2 4<br>R R<br>1 3 1 3<br>Pin 2 1 3 Pin 4 Pin 4<br>Teach-In<br>Pin 4 Pin 2 Teach-In Pin 2 Teach-In<br>Switching output<br>Pin 3 R Pin 3 0 V Pin 3 0 V<br>0 V<br>io | oh | 3H<br>etection Rangeion Rangeon Rangen Rangeangengege<br>+15<br>mm<br>- 15<br> 0 25 250<br>mm<br>Enhanced detection of a target 100 mm² x 100 mm²<br>| |<br>Possible detection of a large target<br>**----- End of picture text -----**<br>
## **Detection Rangeion Rangeon Rangen Rangeangengege**
Honeywell Sensing and Control 3
## **[WARNING ]**
## **PERSONAL INJURY**
DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury.
**Failure to comply with these instructions could result in death or serious injury.**
## **WARRANTY/REMEDY**
Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. **The**
**foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.**
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
## **WARNING**
## **MISUSE OF DOCUMENTATION**
- The information presented in this product sheet is for reference only. Do not use this document as a product installation guide.
- Complete installation, operation, and maintenance information is provided in the instructions supplied with each product.
**Failure to comply with these instructions could result in death or serious injury.**
## **SALES AND SERVICE**
Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or:
**E-mail:** info.sc@honeywell.com
**Internet:** www.honeywell.com/sensing
## **Phone and Fax:**
Asia Pacific +65 6355-2828 +65 6445-3033 Fax Europe +44 (0) 1698 481481 +44 (0) 1698 481676 Fax Latin America +1-305-805-8188
+1-305-883-8257 Fax USA/Canada +1-800-537-6945 +1-815-235-6847 +1-815-235-6545 Fax
## **Automation and Control Solutions**
Sensing and Control Honeywell 1985 Douglas Drive North Minneapolis, MN 55422 www.honeywell.com/sensing
004450-1-EN IL50 GLO Printed in USA February 2006 Copyright © 2006 Honeywell International Inc. All rights reserved.
## 948 Series (948-ISY2D-001/002/003/004-
## 180E) ee Ultrasonic Distance Sensors
## **DESCRIPTION**
The 948 Series is one of the smallest ultrasonic scan through devices in the world. Its small, rectangular, IP67-rated plastic housing makes it easy to install in limited space applications. The sensor consists of two parts, a transmitter and a receiver. It is especially suited for food and beverage applications, in particular bottle counting.
## **FEATURES**
- Thru-scan detection regardless of the object material for enhanced detection
- Non contact distance sensing for use in non invasive measurement
## **POTENTIAL APPLICATIONS**
- Food and beverage machinery and equipment
- Rapid presence/absence detection: bottle counting
- Loop control
- Reduced sensitivity to light intensity/reflectivity/opacity of target for enhanced flexibility and certainty of measurement
- Detects over much longer distance than other detection methods reducing the need for close proximity to the target
- Presence absence, tank fill level and diameter measurement provides an extremely robust and flexible measurement method
## **948 Series (948-ISY-2D-001/002/003/004-180E)**
## **Specifications**
|**Specifications**|||||
|---|---|---|---|---|
|**Parameter**|**948-ISY-2D-001-180E **|**948-ISY-2D-002-180E **|**948-ISY-2D-003-180E **|**948-ISY-2D-004-180E **|
|Sensing distance|1100 mm [3.61 ft]||||
|Response time on/off|3ms||||
|Beam angle|15º||||
|Output|NOPNP|NONPN|NCPNP|NCNPN|
|Expected output current|500mA||||
|Switching frequency|150 Hz||||
|Temperaturerange|-15°C to 60°C [-5°Fto140°F]||||
|Operating voltage|18 Vdc to 30 Vdc||||
|Expected current<br>consumption|<40 mA||||
|Housing|plastic||||
|Sealing|IP67||||
|Cable connection|2 m[6.56 ft]||||
Sensor consists of 2 parts: 1 transmitter and 1 receiver.
With flat targets best results may be achieved with an angle 30° object-ultrasonic beam.
2 www.honeywell.com/sensing
## Ultrasonic Distance Sensors
**Mounting Dimensions (For reference only. mm/[in])**
**Transmitter** Brown: Vdc I [97]50 > | — [78.74]2000 Blue: 0 V (i © i _| [0.94] a—— L ar7 15 [0.59] **Receiver** Brown: Vdc kK 50 2000 Blue: 0 V Black: O/P
Honeywell Sensing and Control 3
## **[WARNING ]**
## **PERSONAL INJURY**
DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury.
**Failure to comply with these instructions could result in death or serious injury.**
## **WARRANTY/REMEDY**
Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. **The**
**foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.**
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
## **WARNING**
## **MISUSE OF DOCUMENTATION**
- The information presented in this product sheet is for reference only. Do not use this document as a product installation guide.
- Complete installation, operation, and maintenance information is provided in the instructions supplied with each product.
**Failure to comply with these instructions could result in death or serious injury.**
## **SALES AND SERVICE**
Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or:
**E-mail:** info.sc@honeywell.com
**Internet:** www.honeywell.com/sensing
## **Phone and Fax:**
Asia Pacific +65 6355-2828 +65 6445-3033 Fax Europe +44 (0) 1698 481481 +44 (0) 1698 481676 Fax Latin America +1-305-805-8188
+1-305-883-8257 Fax USA/Canada +1-800-537-6945 +1-815-235-6847 +1-815-235-6545 Fax
## **Automation and Control Solutions**
Sensing and Control Honeywell 1985 Douglas Drive North Minneapolis, MN 55422 www.honeywell.com/sensing
004448-1-EN IL50 GLO Printed in USA February 2006 Copyright © 2006 Honeywell International Inc. All rights reserved.
Updated at June 9, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →