5.0SMDJ33CA/TR13
TVS DIODE, BIDIR, 5KW, DO-214AB
- Manufacturer: YAGEO
- Product type: TVS Diodes
- Product Range:5.0SMDJ Series; TVS Polarity:Bidirectional; Reverse Standoff Voltage:33V; Clamping Voltage Max:53.3V; Diode Case Style:DO-214AB (SMC); No. of Pins:2Pins; 60AK9725
- No. of Pins: 2Pins
- TVS Polarity: Bidirectional
- Product Range: 5.0SMDJ Series
- Qualification: -
- Diode Mounting: Surface Mount
- Diode Case Style: DO-214AB (SMC)
- Clamping Voltage Max: 53.3V
- Reverse Standoff Voltage: 33V
- Maximum Breakdown Voltage: 40.6V
- Minimum Breakdown Voltage: 36.7V
- Operating Temperature Max: 150°C
- Peak Pulse Power Dissipation: 5kW
| Delivery and price | |
|---|---|
| Units per pack | 500 |
| Price | 0.299 € |
| Current stock | 1000+ |
| Lead time | 30 days |
DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 5.0SMDJ series **RoHS compliant & Halogen free** Of Circuit Protection Product Specification 2 8 Transient Voltage Suppressors 5.0SMDJ ## **Transient Voltage Suppressors (TVS) Data Sheet** ## **Features** ■ For surface mounted applications in order to optimize board space - Low profile package - Built-in strain relief - Glass passivated junction - Low inductance - Excellent clamping capability - 5000W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% - Fast response time - Typical IR less than 2μA - High Temperature soldering: 260 ℃ /10 seconds at terminals - Plastic package has underwriters laboratory flammability 94V-0 - Meets MSL level 1, per J-STD-020 - Safety certification: UL: E244458 - IEC61000-4-2 ESD 30KV Air, 30KV contact compliance ## **Mechanical Data** - Case: JEDEC DO-214AB. Molded plastic over glass passivated junction - Terminal: Tin plated, solderable per MIL-STD-750, Method 2026 - Polarity: Color band denotes cathode except bi-directional models - Standard Packaging: 16mm tape (EIA STD RS-481) - Weight: 0.30g ## **Applications** - I/O interface ■ AC/DC power supply - ■ Low frequency signal transmission line (RS232, RS485, etc.) ## **Maximum Ratings and Characteristics** Ratings at 25 ℃ ambient temperature unless otherwise specified. |Rating|Symbol|Value|Units| |---|---|---|---| |Peak pulse power dissipation at 10/1000μs waveform<br>(Note1,Note2,Fig.1)|PPPM|Minimum 5000|Watts| |Peak pulse current of at 10/1000μs waveform (Note 1, Fig.3)|IPPM|See Table|Amps| |Steady state power dissipation at TA=50℃(Fig.5)|PM(AV)|6.5|Watts| |Peak forward surge current, 8.3ms single half sine-wave<br>superimposed on rated load, (JEDEC Method) (Note3,Fig.6)|IFSM|300|Amps| |Operating junction and Storage Temperature Range.|TJ,TSTG|-55 to +150|℃| |Typical thermal resistance junction to lead|RθJL|15|℃/W| |Typical thermal resistance junction to ambient|RθJA|75|℃/W| Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25 ℃ per Fig.2. 2. Mounted on 8.0mm×8.0mm copper pads to each terminal. 3. 8.3ms single half sine-wave, or equivalent square wave, duty cycle=4 pulses per minutes maximum. Q©O@O— Jun. 14, 2022 V.4 www.yageo.com Circuit Protection > Product Specification 3 8 Transient Voltage Suppressors 5.0SMDJ ## **Dimensions (SMC/DO-214AB)** |Product:<br>Pad:||||Cathode|Cathode|Cathode|D1<br>D<br>Band<br>H1<br>T1<br>H<br>3.20mm<br>1.75mm|D1<br>D<br>Band<br>H1<br>T1<br>H<br>3.20mm<br>1.75mm|Symbol|Millimeters|Millimeters|Inches|Inches| |---|---|---|---|---|---|---|---|---|---|---|---|---|---| |||||||||||Min.|Max.|Min.|Max.| ||||||||||L|6.60|7.11|0.260|0.280| ||||||||||D|5.59|6.22|0.220|0.245| |||||L|||||D1|2.90|3.20|0.114|0.126| ||||||||||||||| ||||||||||T|7.75|8.13|0.305|0.320| ||||||||||||||| ||||||||||||||| ||||||||||T1|0.76|1.52|0.030|0.060| ||||d|T<br>|||T1||||||| ||1.75mm||||||||d|-|0.203|-|0.008| ||||||||||H|2.20|2.80|0.087|0.110| ||||||||||H1|2.06|2.62|0.079|0.103| |||.75mm||4.69mm|||||||||| ## **Electrical Characteristics (TA=25** ℃ **)** |Part Number|Part Number|Device<br>Marking<br>Code|Device<br>Marking<br>Code|Reverse<br>Stand-Off<br>Voltage|Breakdown<br>Voltage<br>@IT|Test<br>Current|Maximum<br>Clamping<br>Voltage<br>@IPP|Peak<br>Pulse<br>Current|Reverse<br>Leakage<br>@VRWM| |---|---|---|---|---|---|---|---|---|---| |Unidirectional|Bidirectional|UNI|BI|VRWM(V)|VBR(V)|IT(mA)|VC(V)|IPP(A)|IR(μA)| |5.0SMDJ11A|5.0SMDJ11CA|5PEN|5BEN|11.0|12.20~13.50|10|18.2|275.00|800| |5.0SMDJ12A|5.0SMDJ12CA|5PEP|5BEP|12.0|13.30~14.70|10|19.9|252.00|800| |5.0SMDJ13A|5.0SMDJ13CA|5PEQ|5BEQ|13.0|14.40~15.90|10|21.5|233.00|500| |5.0SMDJ14A|5.0SMDJ14CA|5PER|5BER|14.0|15.60~17.20|10|23.2|216.00|200| |5.0SMDJ15A|5.0SMDJ15CA|5PES|5BES|15.0|16.70~18.50|1|24.4|205.00|100| |5.0SMDJ16A|5.0SMDJ16CA|5PET|5BET|16.0|17.80~19.70|1|26.0|193.00|50| |5.0SMDJ17A|5.0SMDJ17CA|5PEU|5BEU|17.0|18.90~20.90|1|27.6|181.00|20| |5.0SMDJ18A|5.0SMDJ18CA|5PEV|5BEV|18.0|20.00~22.10|1|29.2|172.00|10| |5.0SMDJ20A|5.0SMDJ20CA|5PEW|5BEW|20.0|22.20~24.50|1|32.4|155.00|5| |5.0SMDJ22A|5.0SMDJ22CA|5PEX|5BEX|22.0|24.40~26.90|1|35.5|141.00|5| |5.0SMDJ24A|5.0SMDJ24CA|5PEZ|5BEZ|24.0|26.70~29.50|1|38.9|129.00|2| |5.0SMDJ26A|5.0SMDJ26CA|5PFE|5BFE|26.0|28.90~31.90|1|42.1|119.00|2| www.yageo.com Jun. 14, 2022 V.4 Circuit Protection > Product Specification 4 8 ## Transient Voltage Suppressors ## 5.0SMDJ |Part Number|Part Number|Device<br>Marking<br>Code|Device<br>Marking<br>Code|Reverse<br>Stand-Off<br>Voltage|Breakdown<br>Voltage<br>@IT|Test<br>Current|Maximum<br>Clamping<br>Voltage<br>@IPP|Peak<br>Pulse<br>Current|Reverse<br>Leakage<br>@VRWM| |---|---|---|---|---|---|---|---|---|---| |Unidirectional|Bidirectional|UNI|BI|VRWM(V)|VBR(V)|IT(mA)|VC(V)|IPP(A)|IR(μA)| |5.0SMDJ28A|5.0SMDJ28CA|5PFG|5BFG|28.0|31.10~34.40|1|45.4|110.00|2| |5.0SMDJ30A|5.0SMDJ30CA|5PFK|5BFK|30.0|33.30~36.80|1|48.4|103.00|2| |5.0SMDJ33A|5.0SMDJ33CA|5PFM|5BFM|33.0|36.70~40.60|1|53.3|93.90|2| |5.0SMDJ36A|5.0SMDJ36CA|5PFP|5BFP|36.0|40.00~44.20|1|58.1|86.10|2| |5.0SMDJ40A|5.0SMDJ40CA|5PFR|5BFR|40.0|44.40~49.10|1|64.5|77.60|2| |5.0SMDJ43A|5.0SMDJ43CA|5PFT|5BFT|43.0|47.80~52.80|1|69.4|72.10|2| |5.0SMDJ45A|5.0SMDJ45CA|5PFV|5BFV|45.0|50.00~55.30|1|72.7|68.80|2| |5.0SMDJ48A|5.0SMDJ48CA|5PFX|5BFX|48.0|53.30~58.90|1|77.4|64.70|2| |5.0SMDJ51A|5.0SMDJ51CA|5PFZ|5BFZ|51.0|56.70~62.70|1|82.4|60.70|2| |5.0SMDJ54A|5.0SMDJ54CA|5PGE|5BGE|54.0|60.00~66.30|1|87.1|57.50|2| |5.0SMDJ58A|5.0SMDJ58CA|5PGG|5BGG|58.0|64.40~71.20|1|93.6|53.50|2| |5.0SMDJ60A|5.0SMDJ60CA|5PGK|5BGK|60.0|66.70~73.70|1|96.8|51.70|2| |5.0SMDJ64A|5.0SMDJ64CA|5PGM|5BGM|64.0|71.10~78.60|1|103.0|48.60|2| |5.0SMDJ70A|5.0SMDJ70CA|5PGP|5BGP|70.0|77.80~86.00|1|113.0|44.30|2| |5.0SMDJ75A|5.0SMDJ75CA|5PGR|5BGR|75.0|83.30~92.10|1|121.0|41.40|2| |5.0SMDJ78A|5.0SMDJ78CA|5PGT|5BGT|78.0|86.70~95.80|1|126.0|39.70|2| |5.0SMDJ85A|5.0SMDJ85CA|5PGV|5BGV|85.0|94.40~104.00|1|137.0|36.50|2| |5.0SMDJ90A|5.0SMDJ90CA|5PGX|5BGX|90.0|100.00~111.00|1|146.0|34.30|2| |5.0SMDJ100A|5.0SMDJ100CA|5PGZ|5BGZ|100.0|111.00~123.00|1|162.0|30.90|2| |5.0SMDJ110A|5.0SMDJ110CA|5PHE|5BHE|110.0|122.00~135.00|1|177.0|28.30|2| |5.0SMDJ120A|5.0SMDJ120CA|5PHG|5BHG|120.0|133.00~147.00|1|193.0|26.00|2| |5.0SMDJ130A|5.0SMDJ130CA|5PHK|5BHK|130.0|144.00~159.00|1|209.0|24.00|2| |5.0SMDJ150A|5.0SMDJ150CA|5PHM|5BHM|150.0|167.00~185.00|1|243.0|20.60|2| |5.0SMDJ160A|5.0SMDJ160CA|5PHP|5BHP|160.0|178.00~197.00|1|259.0|19.30|2| |5.0SMDJ170A|5.0SMDJ170CA|5PHR|5BHR|170.0|189.00~209.00|1|275.0|18.20|2| |5.0SMDJ180A|5.0SMDJ180CA|5HHT|5BHT|180.0|201.00~222.00|1|292.0|17.1|2| |5.0SMDJ190A|5.0SMDJ190CA|5HHV|5BHU|190.0|211.00~243.00|1|308.0|16.2|2| |5.0SMDJ200A|5.0SMDJ200CA|5HHX|5BHV|200.0|224.00~247.00|1|324.0|15.4|2| |5.0SMDJ210A|5.0SMDJ210CA|5HHZ|5BHW|210.0|237.00~269.00|1|340.0|14.7|2| |5.0SMDJ220A|5.0SMDJ220CA|5HIE|5BHX|220.0|246.00~272.00|1|356.0|14.0|2| |5.0SMDJ250A|5.0SMDJ250CA|5HIG|5BHZ|250.0|279.00~309.00|1|405.0|12.3|2| www.yageo.com Jun. 14, 2022 V.4 Circuit Protection > Product Specification 5 8 Transient Voltage Suppressors 5.0SMDJ ## **Ratings and Characteristic Curves (TA=25** ℃ **unless otherwise noted)** Figure 1. Peak Pulse Power Rating Curve Figure 2. Pulse Derating Curve **==> picture [216 x 166] intentionally omitted <==** **----- Start of picture text -----**<br> 1000<br>100<br>10<br>1<br>0.31×0.31″(8.0×8.0mm)<br>Copper Pad Area<br>0.1<br>0.1 1 10 100 1000<br>td-Pulse Width (µs)<br>- Peak Pulse Power (kW)<br>PPM<br>P<br>**----- End of picture text -----**<br> **==> picture [222 x 178] intentionally omitted <==** **----- Start of picture text -----**<br> 100<br>80<br>60<br>40<br>20<br>0<br>0 25 50 75 100 125 150 175<br>TA-Ambient Temperature ( ℃ )<br>)<br>PP<br>) or Current (I<br>PP<br>Derating in Percentage %<br>Peak Pulse Power (P<br>**----- End of picture text -----**<br> Figure 3. Pulse Waveform Figure 4. Typical Junction Capacitance **==> picture [250 x 429] intentionally omitted <==** **----- Start of picture text -----**<br> 150<br>tr=10µs TJ=25 ℃<br>Pulse Width(td) is defined as<br>the point where the peak<br>current decays to 50% of IPPM<br>100 Peak Value IPPM<br>Half Value I PPM (I PPM /2)<br>50<br>10/1000µs Waveform<br>as defined by R.E.A<br>0 t d<br>0 1.0 2.0 3.0 4.0<br>t-Time (ms)<br>Figure 5. Steady State Power Dissipation Derating<br>Curve<br>7<br>6<br>5<br>4<br>3<br>2<br>1<br>0<br>0 25 50 75 100 125 150 175<br>TA-Ambient Temperature ( ℃ )<br>RSM<br>- Peak Pulse Current, %I<br>IPPM<br>, Steady State Power Dissipation (W)<br>M(AV)<br>P<br>**----- End of picture text -----**<br> **==> picture [215 x 170] intentionally omitted <==** **----- Start of picture text -----**<br> 100000<br>Uni-directional<br>10000<br>1000<br>Bi-directional<br>100<br>10<br>Measured at<br>1MHz, 100mV, 0V bias<br>1<br>1 10 100 1000<br>VRWM-Reverse Stand-Off Voltage (V)<br>Cj (pF)<br>**----- End of picture text -----**<br> ## Figure 6. Maximum Non-Repetitive Forward Surge Current Uni-Directional Only **==> picture [221 x 176] intentionally omitted <==** **----- Start of picture text -----**<br> 350<br>300<br>250<br>200<br>150<br>100<br>50<br>0<br>1 10 100<br>Number of Cycles at 60Hz<br>- Peak Forward Surve Current (A)<br>IFSM<br>**----- End of picture text -----**<br> www.yageo.com Jun. 14, 2022 V.4 Circuit Protection > Product Specification 6 8 Transient Voltage Suppressors 5.0SMDJ ## **Recommended Soldering Conditions** Reflow Soldering |**Recommended Soldering Conditions**|**Recommended Soldering Conditions**|**Recommended Soldering Conditions**|**Recommended Soldering Conditions**|**Recommended Soldering Conditions**|**Recommended Soldering Conditions**|**Recommended Soldering Conditions**|**Recommended Soldering Conditions**|**Recommended Soldering Conditions**|**Recommended Soldering Conditions**|**Recommended Soldering Conditions**| |---|---|---|---|---|---|---|---|---|---|---| |Reflow Soldering||||||||||| |TP<br>TL<br>25<br>Temperature|||||tP|||||| |||TS max|||Ramp-up<br>Ramp<br>tL|||||| |||||||||||| |||||||||||| |||TS min||||||||| |||||||||Ramp||-down| ||||tS<br>Preheat|||||||| |||||||||||| ||||t 25℃to Peak|||||||| ||||||Time|||||| |||||||||||| |Recommended Conditions<br>Profile Feature<br>Average ramp-up rate (TLto TP)<br>Preheat<br>-Temperature Min (TS min)<br>-Temperature Max (TS max)<br>-Time (min to max) (tS)<br>TS maxto TL<br>-Ramp-upRate<br>Time maintained above:<br>-Temperature (TL)<br>-Time(tL)<br>Peak Temperature (TP)<br>Time within 5℃of actual Peak Temperature (tP)<br>Ramp-down Rate<br>Time 25℃to Peak Temperature|||||||Pb-Free Assembly<br>3℃/second max.<br>150℃<br>200℃<br>60-180 seconds<br>3℃/second max.<br>217℃<br>60-150 seconds<br>260℃<br>20-40 seconds<br>6℃/second max.<br>8 minutes max.|||| ||Profile Feature||||||Pb-Free Assembly|||| ||Average ramp-up rate (TLto TP)||||||3℃/second max.|||| ||Preheat<br>-Temperature Min (TS min)<br>-Temperature Max (TS max)<br>-Time (min to max) (tS)||||||150℃<br>200℃<br>60-180 seconds|||| ||TS maxto TL<br>-Ramp-upRate||||||3℃/second max.|||| ||Time maintained above:<br>-Temperature (TL)<br>-Time(tL)||||||217℃<br>60-150 seconds|||| ||Peak Temperature (TP)||||||260℃|||| ||Time within 5℃of actual Peak Temperature (tP)||||||20-40 seconds|||| ||Ramp-down Rate||||||6℃/second max.|||| ||Time 25℃to Peak Temperature||||||8 minutes max.|||| |||||||||||| www.yageo.com Jun. 14, 2022 V.4 Circuit Protection > Product Specification 7 8 Transient Voltage Suppressors 5.0SMDJ ## **Marking Code** **==> picture [436 x 102] intentionally omitted <==** **----- Start of picture text -----**<br> Cathode Band<br>YXXX YXXX<br>5PEN 5BEN<br>| a |<br>Logo Intermal Control Code Logo Intermal Control Code<br>Marking Code Marking Code<br>**----- End of picture text -----**<br> ## **Part Number Code** **5.0SMDJ XXX C A / XXXX Package Code** TR7:7 inch reel package TR13:13 inch reel package **5% VBR Voltage Tolerance Bidirectional VRWM Voltage Series Code** ## **Ordering Code for Different Package** 7 inch reel package: Add suffix “/TR7 ” at the end of the part number, such as 5.0SMDJXXXCA/TR7 13 inch reel package: Add suffix “/TR13 ” at the end of the part number, such as 5.0SMDJXXXCA/TR13. www.yageo.com Jun. 14, 2022 V.4 Circuit Protection > Product Specification 8 8 Transient Voltage Suppressors 5.0SMDJ ## **Packaging** |**Packaging**||| |---|---|---| |Tape<br>P0<br>P1<br>P2<br>D0<br>E<br>F<br>W<br>T<br>B0<br>K0<br>B<br>B<br>SECTION B-B<br>A<br>A<br>A0<br>SECTION A-A<br>D1<br>~~—-~~<br>~~Ama ~~<br>~~By~~~~**B**BS~~<br>~~na~~ ~~aba)Ba~~<br>~~aan ee~~<br>i<br>~~I-~~<br>~~4H~~|Symbol<br>~~a~~|Dimension (mm)<br>~~a~~| ||W<br>~~a~~<br>~~es~~|16.00±0.20<br>~~a~~<br>~~es~~| ||P0<br>~~es~~<br>~~|~~|4.00±0.10<br>~~es~~<br>~~|~~| ||P1<br>~~|~~<br>~~es~~|8.00±0.10<br>~~|~~<br>~~es~~| ||P2<br>~~|~~<br>~~es~~<br>~~**e**e~~|2.00±0.10<br>~~|~~<br>~~es~~<br>~~**e**e~~| ||D0<br>~~es~~<br>~~**e**e~~|Φ1.5±0.10<br>~~es~~<br>~~**e**e~~| ||D1<br> ~~es~~<br>~~**e**e~~<br>~~ee~~|Φ1.5±0.10<br>~~es~~<br>~~**e**e~~<br>~~eee~~| ||E<br>~~**e**e ~~<br>~~ee~~|1.75±0.10<br> ~~**e**e~~<br>~~eee~~| ||F<br>~~ee~~|7.50±0.10<br>~~eee~~| ||A0<br>~~ee~~<br>~~es~~|6.27±0.10<br>~~eee~~<br>~~es~~| ||B0<br>~~ee ~~<br>~~es~~<br>~~es~~|8.30±0.10<br> ~~eee~~<br>~~es~~<br>~~es~~| ||K0<br>~~es~~<br>~~es~~|3.15±0.15<br>~~es~~<br>~~es~~| ||T<br>~~es~~<br>~~es~~<br>~~ee~~|0.30±0.05<br>~~es~~<br>~~es~~<br>~~ee~~| |7” Reel<br>D2<br>D3<br>D4<br>W1<br>~~4H~~<br>|<br>~~l~~<br>~~BC~~|D2<br>~~es~~<br>~~ee~~<br>~~ee~~|Φ178.0±2.0<br>~~es~~<br>~~ee~~<br>~~ee~~| ||D3<br>~~ee~~<br>~~ee~~<br>~~ee~~|Φ50.0Min.<br>~~ee~~<br>~~ee~~<br>~~eee~~| ||D4<br>~~ee~~<br>~~ee~~<br>~~ee~~|Φ13.0±0.5<br>~~ee~~<br>~~ee~~<br>~~eee~~| ||W1<br>~~ee ~~<br>~~ee~~<br>~~a~~<br>~~BC~~|20.0±2.0<br> ~~ee~~<br>~~eee~~<br>~~a~~| ||Quantity: 500PCS<br>~~a~~<br>~~BC~~|| |13” Reel<br>~~BC~~<br>Ton|D5<br>~~BC~~<br>~~——~~|Φ330.0±2.0<br>~~——~~| ||D6<br>~~——~~|Φ13.5±0.5<br>~~——~~| ||H<br>~~——~~|2.5±1.0<br>~~——~~| ||W2|20.0±2.0| ||Quantity: 3000PCS|| www.yageo.com Jun. 14, 2022 V.4
Updated at June 4, 2026
Founded in 1977, Yageo Corporation is a premier global provider of passive component solutions. Through strategic acquisitions of industry leaders such as Pulse Electronics, BrightKing, and KEMET, the company has built a comprehensive product portfolio and established a commanding presence across the electronics industry, particularly in capacitors, resistors, and circuit protection technologies. Our extensive range of Yageo components is heavily focused on their advanced circuit protection solutions. We carry a comprehensive selection of transient voltage suppression (TVS) devices, featuring hundreds of TVS diodes and varistors engineered to safeguard sensitive electronics from destructive voltage transients. This core offering is complemented by a robust lineup of gas discharge tubes (GDTs) designed for reliable overvoltage protection in demanding environments. Beyond voltage suppression, we supply a variety of Yageo's specialized thermistor products, including resettable fuses, inrush current limiting (ICL) NTC thermistors, and precision temperature sensing components. Rounding out our selection are high-performance Yageo RF and single-band chip antennas, providing reliable, space-efficient connectivity for modern wireless applications.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →