48.31.8.120.0060SPA

POWER RELAY, SPDT, 120VAC, 10A, DIN RAIL

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
Manufacturer: FINDER
Product type: Power Relays
Contact Configuration:SPDT; Coil Voltage:120VAC; Contact Current:10A; Product Range:48 Series; Relay Mounting:DIN Rail; Coil Type:Non Latching; Contact Voltag 74AH3311
SVHC: No SVHC (25-Jun-2025)
Coil Type: Non Latching
Coil Voltage: 120VAC
Product Range: 48 Series
Relay Mounting: DIN Rail
Coil Resistance: -
Contact Current: 10A
Relay Terminals: Screw
Contact Material: Silver Nickel
Contact Voltage VAC: 250V
Contact Voltage VDC: -
Contact Configuration: SPDT
Delivery and price
Units per pack	250
Price	13.95 €
Current stock	10+
Lead time	30 days
Datasheet
48 SЕRIES 

## Relay Interface Modules 8 - 10 -16 A 

Control panels : Carousel warehouses ~~@~~[.] Medical and dentistry © 

Shipyards Elevators and list s Panels for electrical distribution 

Building automation Hoists and cranes 

FINDER reserves the right to alter characteristics at any time without notice. FINDER assumes no liability for damage to persons or property, caused as a result of the incorrect use or application of its products. 

48 SERIES 

B 

## **2 CO relay interface modules, 15.8 mm wide** 

**==> picture [212 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
48.12 / 48.P2 48.32<br>**----- End of picture text -----**<br>


## **Type 48.12 and 48.P2** 

## **Ideal for safety applications** 

- 2 CO 8 A 

- Relay with forcibly guided contacts according to EN 61810-3 Type B (previously EN 50205) 

## **Type 48.32** 

## **Ideal for energy applications** 

- 2 CO 8 A 

- Breaking capacity DC inductive (L/R=40 ms) 

- 110 V = 0.5 A 

- 2 CO 8 A 

- Push-in or screw terminals 

**==> picture [35 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
• 2 CO 8 A<br>**----- End of picture text -----**<br>


   - Screw terminals 

- 220 V = 0.2 A 

- Screw terminals 

- DC coils 

- Identification label 

- UL Listing (certain relay / socket combinations) 

- 35 mm rail (EN 60715) mounting 

- Cadmium-free contact material 

**==> picture [132 x 16] intentionally omitted <==**

**----- Start of picture text -----**<br>
48.12/32 48.P2<br>Screw terminal Push-in terminal<br>**----- End of picture text -----**<br>


|||pc|ye|
|---|---|---|---|
|According to EN 61810-3 only 1 NO and 1 NC||||
|(11-14 and 21-22 or 11-12 and 21-24) shall be|(11-14 and 21-22 or 11-12 and 21-24) shall be|||
|used as forcibly guided contacts (Type 48.12/P2).||||
|For outline drawing see page 11||||
|**Contact specification**<br>Contact configuration||2 CO (DPDT)|2 CO (DPDT)|
|Rated current/Maximum peak current<br>A||8/15|8/15|
|Rated voltage/<br>Maximum switchingvoltage|V AC|250/400|250/400|
|Rated load AC1|VA|2000|2000|
|Rated load AC15 (230 V AC)|VA|500|500|
|Single phase motor rating (230 V AC)|kW|0.37|0.37|
|Breaking capacity DC1: 30/110/220 V|Breaking capacity DC1: 30/110/220 V<br>A|8/0.65/0.4|8/0.65/0.4|
|Minimum switching load|mW (V/mA)|50 (5/5)|50 (5/5)|
|Standard contact material<br>**Coil specification**<br>Nominal voltage (UN)|V DC|AgNi+Au<br>12 - 24|AgNi+Au<br>24|
|Rated power DC|W|0.7|0.7|
|Operating range|DC|(0.75…1.2)UN|(0.75…1.2)UN|
|Holding voltage|DC|0.4 UN|0.4 UN|
|Must drop-out voltage<br>**Technical data**|DC|0.1 UN|0.1 UN|
|Mechanical life DC|cycles|10 · 106|10 · 106|
|Electrical life at rated load AC1|cycles|100 · 103|100 · 103|
|Operate/release time|ms|10/4|10/4|
|Insulation between coil||||
|and contacts(1.2/50µs)<br>Dielectric strength<br>between open contacts<br>Ambient temperature range<br>Protection category<br>**Approvals relay**(according to type)|kV<br>V AC<br>°C|6(8 mm)<br>1500<br>–40…+70<br>IP 20<br>CEfl<br>®|6(8 mm)<br>1500<br>–40…+70<br>IP 20<br>®AA\is|



**3** 

48 SERIES 

## **1 CO relay interface modules,** 

**==> picture [26 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
48.P3<br>**----- End of picture text -----**<br>


**==> picture [25 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
48.31<br>**----- End of picture text -----**<br>


## **15.8 mm wide** 

## **Ideal interface for PLC and electronic systems** 

## **Type 48.P3** 

- 1 CO 10 A 

- Push-in terminals 

## **Type 48.31** 

B 

- 1 CO 10 A 

- Screw terminals 

- AC coils or DC sensitive coils 

- Supply status indication and EMC coil suppression module as standard 

- 1 CO 10 A 

- Push-in terminals 

   - 1 CO 10 A 

   - Screw terminals 

- Identification label 

- UL Listing (certain relay/socket combinations) 

- 35 mm rail (EN 60715) mounting 

- Cadmium-free contact material 

48.P3 48.31 Push-in terminal Screw terminal 

For outline drawing see page 11 

**==> picture [461 x 403] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||
|---|---|---|---|---|---|
|Contact specification|
|Contact configuration|1 CO (SPDT)|1 CO (SPDT)|
|Rated current/Maximum peak current|A|10/20|10/20|
|Rated voltage/|
|Maximum switching voltage|V AC|250/400|250/400|
|Rated load AC1|VA|2500|2500|
|Rated load AC15 (230 V AC)|VA|500|500|
|Single phase motor rating (230 V AC)|kW|0.37|0.37|
|Breaking capacity DC1: 30/110/220 V|A|10/0.3/0.12|10/0.3/0.12|
|Minimum switching load|mW (V/mA)|300 (5/5)|300 (5/5)|
|Standard contact material|AgNi|AgNi|
|Coil specification|
|Nominal voltage (UN)|V AC (50/60 Hz)|12 - 24 - 110 - 120 - 230|12 - 24 - 110 - 120 - 230|
|V DC|12 - 24 - 125|12 - 24 - 125|
|Rated power AC/sens. DC|VA (50 Hz)/W|1.2/0.5|1.2/0.5|
|Operating range|AC|(0.8…1.1)UN|(0.8…1.1)UN|
|sens. DC|(0.73…1.5)UN|(0.73…1.5)UN|
|Holding voltage|AC/DC|0.8 UN / 0.4 UN|0.8 UN / 0.4 UN|
|Must drop-out voltage|AC/DC|0.2 UN / 0.1 UN|0.2 UN / 0.1 UN|
|Technical data|
|Mechanical life|cycles|10 · 10|[6]|10 · 10|[6]|
|Electrical life at rated load AC1|cycles|200 · 10|[3]|200 · 10|[3]|
|Operate/release time|ms|7/4 (AC) - 12/12 (DC)|7/4 (AC) - 12/12 (DC)|
|Insulation between coil|
|and contacts (1.2/50 µs)|kV|6 (8 mm)|6 (8 mm)|
|Dielectric strength|
|between open contacts|V AC|1000|1000|
|Ambient temperature range|°C|–40…+70|–40…+70|
|Protection category|IP 20|IP 20|
|Approvals relay|(according to type)|

**----- End of picture text -----**<br>


**4** 

48 SERIES 

B 

**2 CO relay interface modules, 15.8 mm wide** 

**==> picture [26 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
48.P5<br>**----- End of picture text -----**<br>


**==> picture [26 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
48.52<br>**----- End of picture text -----**<br>


**Ideal interface for PLC and electronic systems** 

**Type 48.P5** 

- 2 CO 8 A 

- Push-in terminals 

**Type 48.52** 

- 2 CO 8 A 

- Screw terminals 

**==> picture [100 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
• AC coils or DC sensitive coils<br>**----- End of picture text -----**<br>


- Supply status indication and EMC coil suppression module as standard 

**==> picture [35 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
• 2 CO 8 A<br>**----- End of picture text -----**<br>


- Push-in terminals 

**==> picture [34 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
• 2 CO 8 A<br>**----- End of picture text -----**<br>


   - Screw terminals 

- Identification label 

- UL Listing (certain relay/socket combinations) 

- 35 mm rail (EN 60715) mounting 

- Cadmium-free contact material 

48.P5 48.52 Push-in terminal Screw terminal 

|For outline drawing see page 11||||||
|---|---|---|---|---|---|
|**Contact specification**<br>Contact configuration||2 CO (DPDT)|||2 CO (DPDT)|
|Rated current/Maximum peak current<br>A||8/15|||8/15|
|Rated voltage/<br>Maximum switchingvoltage|V AC|250/400|||250/400|
|Rated load AC1|VA|2000|||2000|
|Rated load AC15 (230 V AC)|VA|400|||400|
|Single phase motor rating (230 V AC)<br>kW||0.3|||0.3|
|Breaking capacity DC1: 30/110/220 V<br>A||8/0.3/0.12|||8/0.3/0.12|
|Minimum switching load|mW (V/mA)|300 (5/5)|||300 (5/5)|
|Standard contact material<br>**Coil specification**<br>Nominal voltage (UN)|V AC (50/60 Hz)|AgNi<br>12 - 24 - 110 - 120 - 230|||AgNi<br>12 - 24 - 110 - 120 - 230|
||V DC|12 - 24 - 125|||12 - 24 - 125|
|Rated power AC/sens. DC|VA (50 Hz)/W|1.2/0.5|||1.2/0.5|
|Operating range|AC|(0.8…1.1)UN|||(0.8…1.1)UN|
||sens. DC|(0.73…1.5)UN|||(0.73…1.5)UN|
|Holding voltage|AC/DC|0.8 UN/ 0.4 UN|||0.8 UN/ 0.4 UN|
|Must drop-out voltage<br>**Technical data**|AC/DC|0.2 UN/ 0.1 UN|||0.2 UN/ 0.1 UN|
|Mechanical life|cycles|10 · 106|||10 · 106|
|Electrical life at rated load AC1|cycles|100 · 103|||100 · 103|
|Operate/release time|ms|7/4 (AC) - 12/12 (DC)|||7/4 (AC) - 12/12 (DC)|
|Insulation between coil||||||
|and contacts(1.2/50µs)<br>Dielectric strength<br>between open contacts<br>Ambient temperature range<br>Protection category|kV<br>V AC<br>°C|6(8 mm)<br>1000<br>–40…+70<br>IP 20<br>ce~~@~~<br>~~Hil®~~|~~®~~|~~BRINA~~|6(8 mm)<br>1000<br>–40…+70<br>IP 20<br>®<br>J<br>~~RINA©Ais@~~|
|**Approvals relay**(according to type)||ce~~@~~<br>~~Hil®~~|~~®~~|~~BRINA~~|®<br>J<br>~~RINA©Ais@~~|



**5** 

48 SERIES 

## **1 CO relay interface modules,** 

**==> picture [26 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
48.P6<br>**----- End of picture text -----**<br>


**==> picture [25 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
48.61<br>**----- End of picture text -----**<br>


## **15.8 mm wide** 

## **Ideal interface for PLC and electronic systems** 

## **Type 48.P6** 

- 1 CO 16 A 

- Push-in terminals 

## **Type 48.61** 

B 

- 1 CO 16 A 

- Screw terminals 

- AC coils or DC sensitive coils 

- Supply status indication and EMC coil suppression module as standard 

- 1 CO 16 A 

- Push-in terminals 

   - 1 CO 16 A 

   - Screw terminals 

- Identification label 

- UL Listing (certain relay/socket combinations) 

- 35 mm rail (EN 60715) mounting 

- Cadmium-free contact material available 

## 48.P6 48.61 Push-in terminal Screw terminal 

- For currents > 10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12). 

- For currents > 10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12). 

|For outline drawing see page 11||(21 with 11, 24 with 14, 22 with 12).|(21 with 11, 24 with 14, 22 with 12).|(21 with 11, 24 with 14, 22 with 12).|(21 with 11, 24 with 14, 22 with 12).|(21 with 11, 24 with 14, 22 with 12).|
|---|---|---|---|---|---|---|
|**Contact specification**<br>Contact configuration||||1 CO (SPDT)|1 CO (SPDT)||
|Rated current/Maximum peak current<br>A||||16*/30||16*/30|
|Rated voltage/<br>Maximum switchingvoltage|V AC|||250/400|250/400||
|Rated load AC1|VA|||4000||4000|
|Rated load AC15 (230 V AC)|VA|||750||750|
|Single phase motor rating (230 V AC)|Single phase motor rating (230 V AC)<br>kW|||0.55||0.55|
|Breaking capacity DC1: 30/110/220 V<br>A||||16/0.3/0.12|16/0.3/0.12||
|Minimum switching load|mW (V/mA)|||500 (10/5)|500 (10/5)||
|Standard contact material<br>**Coil specification**<br>Nominal voltage (UN)|V AC (50/60 Hz)|12 - 24 - 110 - 120 - 230|AgCdO<br>12 - 24 - 110 - 120 - 230||AgCdO<br>12 - 24 - 110 - 120 - 230||
||V DC|||12 - 24 - 125|12 - 24 - 125||
|Rated power AC/sens. DC|VA (50 Hz)/W|||1.2/0.5||1.2/0.5|
|Operating range|AC|||(0.8…1.1)UN|(0.8…1.1)UN||
||sens. DC|||(0.8…1.5)UN|(0.8…1.5)UN||
|Holding voltage|AC/DC||0.8 UN/ 0.4 UN||0.8 U|0.8 UN/ 0.4 UN|
|Must drop-out voltage<br>**Technical data**|AC/DC||0.2 UN/ 0.1 UN||0.2 U|0.2 UN/ 0.1 UN|
|Mechanical life|cycles|||10 · 106||10 · 106|
|Electrical life at rated load AC1|cycles|||100 · 103|100 · 103||
|Operate/release time|ms|7/4 (AC) - 12/12 (DC)||7/4 (AC) - 12/12 (DC)|7/4 (AC) - 12/12 (DC)||
|Insulation between coil|||||||
|and contacts(1.2/50µs)<br>Dielectric strength<br>between open contacts<br>Ambient temperature range<br>Protection category|kV<br>V AC<br>°C|CESH@BRNASAMs|@BRNASAMs|6(8 mm)<br>1000<br>–40…+70<br>IP 20<br>@BRNASAMs<br>~~Gs~~|6(8 mm)<br>1000<br>–40…+70<br>IP 20<br>~~CEGEL@RINAMis~~||
|**Approvals relay**(according to type)||CESH@BRNASAMs|@BRNASAMs|@BRNASAMs<br>~~Gs~~|~~CEGEL@RINA~~|~~@RINAMis~~|



**6** 

48 SERIES 

B 

## **2 CO relay interface modules, 15.8 mm wide** 

**==> picture [26 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
48.P8<br>**----- End of picture text -----**<br>


## **48.62** 

**Ideal interface for PLC and electronic systems** 

## **Type 48.P8** 

- 2 CO 10 A 

- Push-in terminals 

**Type 48.62** 

- 2 CO 10 A 

- Screw terminals 

- DC sensitive coils 

- Supply status indication and EMC coil suppression module as standard 

- 2 CO 10 A 

- Push-in terminals 

**==> picture [39 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
• 2 CO 10 A<br>**----- End of picture text -----**<br>


   - Screw terminals 

- Identification label 

- UL Listing (certain relay/socket combinations) 

- 35 mm rail (EN 60715) mounting 

- Cadmium-free contact material 

48.P8 48.62 Push-in terminal Screw terminal 

|For outline drawing see page 11||||
|---|---|---|---|
|**Contact specification**<br>Contact configuration||2 CO (DPDT)<br>2 CO (DPDT)||
|Rated current/Maximum peak current<br>A||10/20<br>10/20<br>~~a~~||
|Rated voltage/<br>Maximum switchingvoltage|V AC|250/400<br>250/400||
|Rated load AC1<br>Rated load AC15 (230 V AC)|VA<br>VA|2500<br>2500<br>750<br>750<br>~~a~~<br>~~a~~||
|Single phase motor rating (230 V AC)|Single phase motor rating (230 V AC)<br>kW|0.37<br>0.37<br>~~a~~||
|Breaking capacity DC1: 30/110/220 V<br>A||10/0.6/0.25<br>10/0.6/0.25<br>~~a~~||
|Minimum switching load|mW (V/mA)|300 (5/5)<br>300 (5/5)<br>~~a~~||
|Standard contact material<br>**Coil specification**<br>Nominal voltage (UN)|V AC (50/60 Hz)|AgNi<br>—|AgNi<br>—|
||V DC|12 - 24 - 125<br>12 - 24 - 125<br>~~a~~||
|Rated power AC/sens. DC|VA (50 Hz)/W|—/0.5<br>—/0.5<br>~~a~~||
|Operating range|AC|—<br>—<br>~~a~~||
||sens. DC|(0.8…1.5)UN<br>(0.8…1.5)UN<br>~~a~~||
|Holding voltage|AC/DC|—/0.4 UN<br>—/0.4 UN<br>~~a~~||
|Must drop-out voltage<br>**Technical data**|AC/DC|—/0.1 UN<br>—/0.1 UN||
|Mechanical life|cycles|10 · 106|10 · 106|
|Electrical life at rated load AC1|cycles|100 · 103<br>100 · 103<br>~~a~~||
|Operate/release time|ms|12/12 (DC)<br>12/12 (DC)<br>~~a~~||
|Insulation between coil||||
|and contacts(1.2/50µs)<br>Dielectric strength<br>between open contacts<br>Ambient temperature range<br>Protection category|kV<br>V AC<br>°C|6(8 mm)<br>6(8 mm)<br>1000<br>1000<br>–40…+70<br>–40…+70<br>IP 20<br>IP 20<br>~~a~~<br>~~a~~<br>CEGHMOBRNACMsGS<br>CESEAL@RINAAles||
|**Approvals relay**(according to type)||CEGHMOBRNACMsGS<br>CESEAL@RINA|@RINAAles|



**7** 

48 SERIES 

## **Ordering information** 

Example:  48 series, 35 mm rail (EN 60715) mount, Push-in terminal relay interface module, 2 CO 8 A contacts, 24 V sensitive DC coil, green LED + diode, 99.02 coil indication. 

## **A B C D 4 8 . P 5 . 7 . 0 2 4 . 0 0 5 0** 

B 

**Series** 

## **Type** 

Screw terminal 

- 1 =  35 mm rail (EN 60715) mount, forcibly guided contacts relay 

- 3 =  35 mm rail (EN 60715) mount 

- 5 =  35 mm rail (EN 60715) mount 

6 =  35 mm rail (EN 60715) mount Push-in terminal P =  35 mm rail (EN 60715) mount 

## **A: Contact material** 

0 =  Standard AgNi for 48.P3/P5/P8/31/52/62 AgCdO, Standard for 48.P6/61 

- 4 =  AgSnO2, for 48.P6/P8/ 61/62 only 

- 5 =  AgNi + Au, for 48.12/P2 and 48.P3/P5/31/52 only Standard for 48.32 

## **D: Special versions** 

0 =  Standard 

7 =  Standard (for 48.12/48.P2 only) 

## **C: Options** 

- 0 =  Standard (for 48.12/48.P2 only) 

- 5 =  Standard for DC: green LED + diode (polarity +A1) 

- 6 =  Standard for AC and 48.32: green LED + Varistor 

## **B: Contact circuit** 

## **Type** 

- 0 =  CO (nPDT) 

Screw terminal 

- 1 = for  48.31, 1 pole, 10 A 

48.61, 1 pole, 16 A 

- 2 = for  48.12/48.32 (DC only), 48.52, 2 poles, 8 A 48.62 (DC only), 2 poles, 10 A 

Push-in terminal 

- 2 = for 48.P2 (DC only), 2 pole, 8 A 

- 3 = for 48.P3, 1 pole, 10 A 

- 5 = for 48.P5, 2 pole, 8 A 

- 6 = for 48.P6, 1 pole, 16 A 

- 8 = for 48.P8 (DC only), 2 pole, 10 A 

## **Coil version** 

7 =  Sensitive DC 

- 8 =  AC (50/60 Hz) 

9 = DC (for 48.12/48.P2 only) 

## **Coil voltage** 

See coil specifications 

**Selecting features and options: only combinations in the same row are possible.** Preferred selections for best availability are shown in **bold.** 

||**Type**|**Coil version**|**A**|**B**|**C**|**D**|
|---|---|---|---|---|---|---|
||48.12/48.P2|DC|**5**|**0**|**0**|**7**|
||48.32<br>48.P3/P5/31/52|DC<br>AC|**5**<br>**0**- 5|**0**<br>0|**6**<br>**6**|**0**<br>0|
||48.P3/P5/31/52|Sensitive DC|**0**- 5|0|**5**|0|
||48.P6/61|AC|**0**- 4|0|**6**|0|
||48.P6/61|Sensitive DC|**0**- 4|0|**5**|0|
||48.P8/62|Sensitive DC|**0**- 4|0|**5**|0|



## **Technical data** 

|**Technical data**||||||||||
|---|---|---|---|---|---|---|---|---|---|
|**Insulation**|||**48.12/P2/31/32/61/P3/P6 **||**48.52/P5**||**48.12/31/61/62/P3/P6/P8**||II-2020, www.findernet.com|
|Insulation according to EN 61810-1|insulation rated voltage<br>V||250||250||400|||
||rated impulse withstand voltage<br>kV||4||4||4|||
||pollution degree||3||2||2|||
||overvoltage category||III||III||III|||
|Insulation between coil and contacts (1.2/50µs)<br>kV|||6 (8 mm)|||||||
|Dielectric strength between open contacts<br>V AC|||1000; 1500 (48.12/P2/32)|||||||
|Dielectric strength between adjacent contacts<br>V AC|||2000 (48.P5/52); 2500 (48.P8/62) 3000 (48.12/P2/32)|||||||
|**Insulation between coil terminals**||||||||||
|Rated impulse voltage (surge) differential mode<br>(according to EN 61000-4-5)<br>kV (1.2/50 µs)|||2|||||||
|**Other data**||||||||||
|Bounce time: NO/NC||ms|2/5; 2/10 (48.12/P2/32)|||||||
|Vibration resistance (10…200)Hz: NO/NC||g|20/5 (for 1pole)|||15/3; 20/6 (48.12/P2/32) for 2pole||||
|Power lost to the environment|without contact current|W|0.7|||||||
||with rated current|W|1.2 (48.12/P2/31/32/P3)|||2 (48.52/P5/61/62/P6/P8)||||
|Wire striplength||mm|8|||||||
|Screw torque (only for 48.12/31/32/52/61/81)||Nm|0.5|||||||
|Min. wire size|||**Screw terminal**|||**Push-in terminal**||||
||||solid cable|stranded cable||solid cable||stranded cable||
|||mm2|0.5|0.5||0.5||0.5||
|||AWG|21|21||21||21||
|Max. wire size||mm2|**Screw terminal**|||**Push-in terminal**||||
||||solid cable|stranded cable||solid cable||stranded cable||
||||1 x 6 / 2 x 2.5|1 x 4 / 2 x 2.5||2 x 1.5 / 1 x 2.5||2 x 1.5 / 1 x 2.5||
|||AWG|1 x 10 / 2 x 14|1 x 12 / 2 x 14||2 x 16 / 1 x 14||2 x 16 / 1 x 14||



**8** 

48 SERIES 

B 

## **Contact specification** 

**F 48 - Electrical life (AC) v contact current** Types 48.P3/P6/31/61 

**==> picture [252 x 303] intentionally omitted <==**

**----- Start of picture text -----**<br>
Resistive load - cos ϕ = 1<br>Inductive load- cos ϕ  = 0.4<br>limit for 48.31<br>F 48 - Electrical life (AC) v contact current<br>Types 48.P5/52<br>Resistive load - cos ϕ = 1<br>Inductive load- cos ϕ = 0.4<br>Cycles<br>Cycles<br>**----- End of picture text -----**<br>


**==> picture [252 x 325] intentionally omitted <==**

**----- Start of picture text -----**<br>
H 48 - Maximum DC1 breaking capacity<br>Types 48.P3/P5/P6/31/52/61<br>48.P6/61 current limit<br>48.P3/31 current limit<br>48.P5/52 current limit<br>2 contacts in series<br>single contact<br>DC voltage (V)<br>H 48 - Maximum DC1 breaking capacity<br>Type 48.12/P2/32<br>DC voltage (V)<br>DC breaking current (A)<br>DC breaking current (A)<br>**----- End of picture text -----**<br>


**F 48 - Electrical life (AC) v contact current** Types 48.P8/62 

**==> picture [213 x 117] intentionally omitted <==**

**----- Start of picture text -----**<br>
Resistive load - cos ϕ  = 1<br>Inductive load AC15<br>8 12<br>Cycles<br>**----- End of picture text -----**<br>


## **F 48 - Electrical life (AC) v contact current** 

Type 48.12/P2/32 

**==> picture [214 x 108] intentionally omitted <==**

**----- Start of picture text -----**<br>
Resistive load - cos ϕ  = 1<br>Inductive load- cos ϕ  = 0.4<br>Cycles<br>**----- End of picture text -----**<br>


**H 48 - Maximum DC1 breaking capacity** Types 48.P8/62 

**==> picture [214 x 122] intentionally omitted <==**

**----- Start of picture text -----**<br>
2 contacts in series<br>single contact<br>DC voltage (V)<br>DC breaking current (A)<br>**----- End of picture text -----**<br>


- When switching a resistive load (DC1) having voltage and current values under the curve, an electrical life of ≥ 100 · 10[3] can be expected. 

- In the case of DC13 loads, the connection of a diode in parallel with the load will permit a similar electrical life as for a DC1 load. Note: the release time for the load will be increased. 

**9** 

48 SERIES 

## **Coil specifications** 

B 

## **DC coil data (0.5 W sensitive)** 

|Nominal<br>voltage<br>UN|Coil<br>code|Operating range<br>Umin*<br>Umax|Operating range<br>Umin*<br>Umax|Rated coil<br>consumption<br>Iat UN|
|---|---|---|---|---|
|V||V|V|mA|
|12|**7**.012|8.8|18|41|
|24|**7**.024|17.5|36|22.2|
|125|**7**.125|91|188|4|



- Umin = 0.8 UN for 48.61, 48.62, 48.P6, 48.P8 

## **AC coil data** 

|**AC coil data**|||||
|---|---|---|---|---|
|Nominal<br>voltage<br>UN|Coil<br>code|Operating range<br>Umin<br>Umax||Rated coil<br>consumption<br>Iat UN(50 Hz)|
|V||V|V|mA|
|12|**8**.012|9.6|13.2|90.5|
|24|**8**.024|19.2|26.4|46|
|110|**8**.110|88|121|10.1|
|120|**8**.120|96|132|11.8|
|230|**8**.230|184|253|7.0|



**DC coil data,** (0.7 W standard) -  Type 48.12/48.P2/48.32, 

(48.32 available only 24 V DC) 

|Nominal<br>voltage<br>UN|Coil<br>code|Operating range<br>Umin<br>Umax|Operating range<br>Umin<br>Umax|Resistance<br>R|Rated coil<br>consumption<br>Iat UN|
|---|---|---|---|---|---|
|V||V|V|Ω|mA|
|12|**9**.012|9|14.4|205|58.5|
|24|**9**.024|18|28.8|820|29.3|



## **R 48 - DC coil operating range v ambient temperature** 

**==> picture [191 x 104] intentionally omitted <==**

**----- Start of picture text -----**<br>
48.P3/P5/31/52<br>48.P6/P8/61/62 1<br>48.P6/P8/61/62<br>2<br>48.P3/P5/31/52<br>**----- End of picture text -----**<br>


**1 -** Max. permitted coil voltage. 

**2 -** Min. pick-up voltage with coil at ambient temperature. 

## **R 48 - AC coil operating range v ambient temperature** 

**==> picture [190 x 104] intentionally omitted <==**

**----- Start of picture text -----**<br>
1<br>2<br>**----- End of picture text -----**<br>


**1 -** Max. permitted coil voltage. 

**2 -** Min. pick-up voltage with coil at ambient temperature. 

## **R 48 -  DC coil operating range v ambient temperature Type 48.12/P2/32** 

**==> picture [215 x 129] intentionally omitted <==**

**1 -** Max. permitted coil voltage. 

**2 -** Min. pick-up voltage with coil at ambient temperature. 

**10** 

48 SERIES 

## **Combinations** 

||||**Type of socket**<br>95.05.7|**Type of socket**<br>95.05.7|**Type of socket**<br>95.05.7|**Type of relay**<br>**Module**<br>50.12<br>—|**Module**<br>**Retaining clip**<br>—<br>095.71|**Retaining clip**<br>095.71|
|---|---|---|---|---|---|---|---|---|
||||95.P5.7<br>~~ee~~|||50.12<br>—<br>~~ee~~|—<br>095.71<br>~~ee~~|095.71|
||||95.05<br>~~ee~~|||50.12<br>99.02<br>~~ee~~|99.02<br>095.01<br>~~ee~~|095.01|
|48.31|||95.03<br>~~ee~~<br>~~es~~||~~ee~~<br>~~es~~|40.31<br>99.02<br>~~ee~~<br>~~es~~|99.02<br>095.01<br>~~ee~~<br>~~es~~|095.01|
|48.31|||95.03<br>~~es~~||||||
|~~2~~|||~~9~~<br>~~es~~<br>~~es~~|~~9~~5.05<br>~~es~~<br>~~es~~|~~es~~<br>~~es~~|40.52<br>99.02<br>~~es~~<br>~~es~~|99.02<br>095.01<br>~~es~~<br>~~es~~|095.01<br>~~es~~|
|~~2~~|||~~9~~<br>~~es~~||||||
|48.61|||95.05<br>~~es~~|95.05<br>~~es~~|~~es~~|40.61<br>99.02<br>~~es~~|99.02<br>095.01<br>~~es~~|095.01<br>~~es~~|
|48.62|||95.05<br>~~rs~~|95.05<br>~~rs~~|~~rs~~|40.62<br>99.02<br>~~rs~~|99.02<br>095.01|095.01|
|48.P3|||95.P3<br>~~rs~~<br>~~es~~|95.P3<br>~~rs~~<br>~~es~~||40.31<br>99.02<br>~~rs~~<br>~~es~~|99.02<br>095.91.3<br>~~es~~|095.91.3|
||||95.P3<br>~~es~~||||||
|8.P5|||95.P5<br>~~es~~<br>~~ee~~|95.P5<br>~~es~~<br>~~ee~~|~~es~~<br>~~ee~~|40.52<br>99.02<br>~~es~~<br>~~ee~~<br>~~es~~|99.02<br>095.91.3<br>~~es~~<br>~~ee~~|095.91.3|
|48.P6|||95.P5<br>~~ee~~<br>~~es~~|95.P5<br>~~ee~~<br>~~es~~||40.61<br>99.02<br>~~ee~~<br>~~es~~<br>~~es~~|99.02<br>095.91.3<br>~~ee~~<br>~~es~~|095.91.3|
|48.P8|||95.P5<br>~~es~~<br>~~es~~|95.P5<br>~~es~~<br>~~es~~||40.62<br>99.02<br>~~es~~<br>~~es~~|99.02<br>095.91.3<br>~~es~~<br>~~es~~|095.91.3|
||||||||||



## **Outli dra gs** 

**==> picture [450 x 439] intentionally omitted <==**

**----- Start of picture text -----**<br>
64.5<br>15.8 25.9 17.5 17.5<br>_<br>|<br>EEE) | (eee Uy WY<br>32<br>Types  48.31 48.32 / 48.52 / 48.61 / 48.62  Type  48.12<br>Screw terminal  Screw terminal<br>15.8 3.6 58.1<br>| |<br>MP N RF ef fy ap<br>30.4<br>Types  48.P2  48.P3  48.P5  48.P6  48.P8<br>Push-in terminal  Push-in terminal<br>21.6<br>78.6 35.4<br>25.5<br>30.5<br>95.5 35.5<br>29.5<br>**----- End of picture text -----**<br>


**11** 

48 SERIES 

## **Accessories** 

**==> picture [495 x 498] intentionally omitted <==**

**----- Start of picture text -----**<br>
8-way jumper link  for type 48.P3/P5/P6/P8 097.58<br>Rated values 10 A - 250 V<br>097.58 c=)© ivfLE15.8 ea &LL& & @ BA dss<br>B tren 56<br>2-way jumper link  for type 48.P3/P5/P6/P8 097.52<br>Rated values 10 A - 250 V<br>097.52<br>fo> )<br>vt,<br>_ [E=d]<br>2-way jumper link  for type 48.P3/P5/P6/P8 097.42<br>Rated values 10 A - 250 V<br>f 2 46<br>097.42<br>a<br>ise)<br>_ [[es]<br>7 . 7<br>SS Marker tag holder 5.8 44  for type 48.P3/P5/P6/P8 and 48.12/31/32/52/61/62 097.00<br>097.00<br>ay<br>8-way jumper link  for screw terminal version 095.18 (blue) 095.18.0 (black)<br>Rated values 10 A - 250 V<br>095.18<br>WS 110.5 ; 5.1<br>15 15.8 15.8 15.8 15.8 15.8 15 S<br>Sheet of marker tags (CEMBRE Thermal transfer printers) , plastic,<br>48 tags, 6 x 12 mm 060.48<br>060.48<br>P E A<br>P A T E N T<br>RO N<br>U<br>E E<br>U<br>NA E POR<br>**----- End of picture text -----**<br>


**==> picture [90 x 12] intentionally omitted <==**

**----- Start of picture text -----**<br>
Packaging codes<br>**----- End of picture text -----**<br>


**How to code and identify retaining clip and packaging options for sockets.** 

Example: 

**4 8 . P 5 . 7 . 0 2 4 . 0 0 5 0 S P A A** Standard packaging **B** Blister packaging **SP** Plastic retaining clip 

**12** 

Please see general technical information
Updated at June 7, 2026
About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →
Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →
Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →