47216

AC/DC PCB Mount Power Supply (PSU), ITE, 1 Output, 10 W, 3.3 VDC, 3 A

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.

Manufacturer: MYRRA
Product type: AC / DC PCB Mount Power Supplies
No. of Outputs:1 Output; Output Power Max:10W; Output Voltage - Output 1:3.3V; Output Current - Output 1:3A; Output Voltage - Output 2:-; Output Current - Output 2:-; Output Voltage - Outpu
SVHC: No SVHC (17-Dec-2015)
Depth: 48mm
Width: 40mm
Height: 26mm
Product Range: 47000 Series
No. of Outputs: 1 Output
Output Power Max: 10W
Input Voltage VAC: 85V AC to 265V AC
Input Voltage AC Max: 265V
Input Voltage AC Min: 85V
Power Supply Output Type: Fixed
Output Current - Output 1: 3A
Output Current - Output 2: -
Output Current - Output 3: -
Output Voltage - Output 1: 3.3VDC
Output Voltage - Output 2: -
Output Voltage - Output 3: -
Power Supply Applications: ITE

Delivery and price
Units per pack	250
Price	9.0 €
Current stock	10+
Lead time	30 days

Datasheet

ONE OUTPUT 10W – Regulated 

~~OE~~ 

## **MAIN FEATURES:** 

- **10W Small Compact Size - PCB Mount** 

- **Single Output - Regulated** 

- **Output Range : 3.3VDC - 24VDC** 

- **Input Range : 85VAC - 265VAC/47 - 63Hz Or 120VDC - 370VDC** 

- **Very Low Standby Power Consumption < 0.1W** 

- **Better Energetic Efficiency : Meet Requirements Of Energy Star And EC Code Of Conduct** 

- **Encapsulated Design And Same Footprint As EI48 Transformer: Upgrade Your Application Without Redesign Of PCB** 

- ○ **Safety : IEC/EN61558-2-16,IEC/EN60950,IEC/EN60335, UL/CUL60950,CE,VDE,ENEC Mark** 

- **Materials : Uses UL 94-V0 Plastic And Resin** 

- **EMC : Conducted And Radiated Emissions Conform To EN55014 CLASS B , EN55022 CLASS B And FCC Part 15** 

   - **Immunity Conform To EN61000-3-3** , **EN61000-4-2,** 

**EN61000-4-3,EN61000-4-4** , **EN61000-4-5, EN61000-4-6,** 

**EN61000-4-8, EN61000-4-11** 

|Part<br>No|Power Rating<br>Watts|Output<br>Voltage<br>(VDC)|Output<br>Current<br>（mA）|Ambient<br>Temp.<br>(℃)|Efficiency<br>Typical|Input Range|
|---|---|---|---|---|---|---|
|47210|10<br>~~lL~~|5<br>~~lL~~|2000<br>~~lL~~|60<br>~~lL~~|>74%@230VAC<br>~~lL~~|85VAC-265VAC<br>(120VDC-370VDC)|
|47211|10<br>~~lL~~|9<br>~~lL~~|1100<br>~~lL~~|60<br>~~lL~~|>80%@230VAC<br>~~lL~~||
|47212|10<br>~~lLUhe~~|12<br>~~lLUhe~~|830<br>~~lLUhe~~|60<br>~~lLUhe~~|>82%@230VAC||
|47213|10<br>~~lLUhe~~|15<br>~~lLUhe~~|670<br>~~lLUhe~~|60<br>~~lLUhe~~|||
|47214|10<br>~~lL~~|18<br>~~lL~~|560<br>~~lL~~|60<br>~~lL~~|||
|47215|10<br>~~lL~~|24<br>~~lL~~|420<br>~~lL~~|60<br>~~lL~~|||
|47216|10|3.3|3000<br>~~tim~~|50<br>~~tim~~|>72%@230VAC<br>~~tim~~||
|Note: Other Output Voltages Are Available Upon Request|||||||



Note: Other Output Voltages Are Available Upon Request 

Revision: 3                                                                                 Page: 1 of 6 www.myrra.com The information contained in this document is subject to change without notice. 

## ONE OUTPUT 10W – Regulated 

|**Model: 10 Watt**|**Model: 10 Watt**|**Specification**|
|---|---|---|
|AC Input<br>Characteristics|Rated AC input Voltage|100~240Vac Or 140VDC-340VDC|
||AC Input Voltage Range|85~265Vac Or 120VDC-370VDC|
||AC Input Frequency Range|47Hz~63Hz|
||Rated AC Input Frequency|50/60Hz|
||Input Current|0.4A Max@85Vac~265Vac, at full load|
||Input Inrush Current|40A Max @85Vac~265Vac input, cold start, full load|
||Standby Power|0.1W Max(Meet Requirements Of Energy Star And EC<br>Code Of Conduct)|
|DC Output<br>Characteristics|Output Voltage Accuracy|± 2% (9V,12V,15V,18V,24V Types)<br>± 3% (5V Type)<br>± 4%(3.3V Type)|
||Output<br>Voltage<br>Line<br>Regulation|± 0.5%(9V,12V,15V,18V,24V Types)<br>± 1%(3.3V and 5V Types )|
||Output<br>Voltage<br>Load<br>Regulation|± 1%(9V,12V,15V,18V,24V Types)<br>± 3% (5V Type)<br>± 4%(3.3V Type)|
||Ripple & Noise|Max 150mVp-p @Rated AC input  (The measuring<br>will be terminated with a 47uF AL E-Cap and a 0.1uF<br>Cer-Cap. An oscilloscope set at 20MHz bandwidth)|
||Dynamic Response|The output voltage shall not exceed ±10% rated output<br>voltage @ 10%←→90% Load change, 1A/uS , 1KHz<br>50% duty cycle|
||Overshoot|The output voltage shall not exceed +10% rated output<br>voltage @ Power on and 85Vac~265Vac input, and DC<br>with full load|
||Undershoot|The output voltage shall not exceed -10% rated output|



Revision: 3                                                                                 Page: 2 of 6 www.myrra.com The information contained in this document is subject to change without notice. 

## ONE OUTPUT 10W – Regulated 

|||output with full load|
|---|---|---|
||Hold Up Time|5mS Min@ 100Vac ~240Vac, DC output with full load|
||Turn On Delay|3S max @ 85Vac~265Vac input and DC output with full<br>load|
||Rise Time|50ms Max @ 85Vac~265Vac input and DC output with<br>full load|
||Efficiency|See table (Meet Requirements Of Energy Star And EC<br>Code Of Conduct)|
|Protection<br>Characteristics|Over Current Protection|The power supply shall automatic protection. The<br>power supply shall auto-recovery normal operation<br>after the deformation is removed. No excessive heat,<br>odor, or plastic deformation shall occur, no safety<br>hazard|
||Output<br>Short<br>Circuit<br>Protection|The power supply shall withstand a continuous output<br>short without damage in 24 hours; The short may be<br>applied before power on, or after power on; The<br>power supply shall resume normal operation after the<br>short is removed, no excessive heat, odor, or plastic<br>deformation shall occur, no safety hazard|
||Over<br>temperature<br>protection|Thepower supplyshall shut down when the<br>junction temperature of PWM controller exceeds<br>the thermal shutdown temperature ,typically<br>140°C±10°C.|
|Environmental|Operation Temperature|-25°C ~ +Ta (see table)|
||Operation Humidity|10~ 90% RH(No Condensing) @ full load|
||Storage Temperature|-40°C~ +85°C|
||Storage Humidity|5%~95%|
||Cooling Method|Ordinary or thermostat|



Revision: 3                                                                                 Page: 3 of 6 

www.myrra.com The information contained in this document is subject to change without notice. 

## ONE OUTPUT 10W – Regulated x) es 

|Safety & EMC<br>Requirement|Dielectric Strength|Primary to Secondary: 4000Vac 5mA, 3 sec .|
|---|---|---|
||Radiation|Meeting EN55022,EN55014,FCC, part 15, Class B.<br>under 3dB margin|
||Conduction|Meeting EN55022,EN55014, FCC, part 15,Class B.<br>under 3dB margin|
||Power Clamp Radiation|Meeting EN 55014-1: 2006+A1: 2009+A2:2011|
||Lightning Surge|Meeting EN61000-4-5:2006, Level II. ±2KV|
||Electric Fast Transient|Meeting EN61000-4-4:2012,±4KV|
||Voltage Dips And<br>Interruptions|Meeting EN61000-4-11:2004|
||Voltage Fluctuation And<br>Flicker|Meeting EN61000-3-3:2013|
||Electrostatic Discharge|Meeting EN61000-4-2:2009<br>Contact Discharge ±4KV,Air Discharge ±8KV|
||RF Field Strength<br>Susceptibility|Meeting EN61000-4-3:2006+A1:2008+A2:2010|
||Conducted Susceptibility|Meeting EN61000-4-6:2014|
||Power Frequency Magnetic<br>Field Susceptibility|Meeting EN61000-4-8:2010|
||Safety Standards|Meet all requirements of<br>UL/CUL60950<br>IEC/EN60950<br>IEC/EN60335<br>IEC/EN61558-2-16<br>CE,VDE,And ENEC Mark|
|Reliability<br>Requirement|MTBF|Calculated by MIL-HDBK-217-F2<br>5V ,9V,12V,15V,18V,24V Types:<br>200K Hours Min. @230VAC input, 60deg.C<br>3.3V type:200K Hours Min. @230VAC input, 50deg.C|
||Burn-In Test|The unit shall be burned in for 2~ 5hours under 230Vac<br>input and DC with full load at an ambient temperature|



Revision: 3                                                                                 Page: 4 of 6 www.myrra.com The information contained in this document is subject to change without notice. 

## ONE OUTPUT 10W – Regulated 

|||of 30~45 degrees C|
|---|---|---|
|Mechanical|Physical Size|The units do not including PINs of input and output,<br>and dimension is<br>(L)48.0*(W)40.0*(H)26.0± 0.5mm<br>(see appearance drawing)|
||Net Weight|About 80.2 grams per product unit.|
|Guarantee|This product meet to RoHS standard||



## **SCHEMATIC** 

Revision: 3                                                                                 Page: 5 of 6 www.myrra.com The information contained in this document is subject to change without notice. 

## ONE OUTPUT 10W – Regulated 

## **DERATING GRAPH** 

## **DIMENSIONS And PINOUT** 

## **4 PINS** 

## **PRI:** 

## **Pins 1 – 5: AC Or DC Input** 

**SEC:** 

**Pin 7 : DC Output +V Pin 9 : DC Output 0V** 

**==> picture [114 x 12] intentionally omitted <==**

**----- Start of picture text -----**<br>
(View From Pins Side)<br>**----- End of picture text -----**<br>


Revision: 3                                                                                 Page: 6 of 6 www.myrra.com The information contained in this document is subject to change without notice.

Updated at June 3, 2026

About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.

Learn more →

Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.

Request a quote →

Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.

BOM Analysis service →