4130-G211-K4M1 70A

**High Performance Thermal Circuit Breaker 4130-...** 

**1** 

## **Description** 

Single pole high performance thermal circuit breaker, with push-toreset tease free, trip-free snap action mechanism (R-type TO CBE to EN 60934). Designed for threadneck panel mounting and for applications with a high fault current switching requirement. Approved to CBE standard EN 60934 (IEC 60934). 

## **Typical applications** 

Motors, transformers, solenoids, battery chargers, power supplies, appliances, machinery, extra low voltage systems. 

**4130-...** 

## **Ordering information** 

## **Type No.** 

**4130** single pole thermal circuit breaker **Mounting G** threadneck panel mounting **Threadneck design 2** M 12x1, knurled nut (bulk shipped) **4** M 12x1, hex nut and knurled nut (bulk shipped) **Number of poles 1** single pole, thermally protected **Actuator configuration 1** black push button **Terminal design K4** terminal M6x8 screw and washer bulk shipped **Characteristic curve M1** medium delay **Current ratings 20... 70 A** ~~=~~ **4130 - G  2 1  1 - K4 M1 - 20 A** ordering example **Standard current ratings and typical internal resistance values Current Internal Current Internal rating (A) resistance (** Ω **) rating (A) resistance (** Ω **)** 20 < 0.02 40 < 0.01 25 < 0.02 50 < 0.01 30 < 0.02 60 < 0.01 ~~————~~ 35 < 0.02 70 < 0.01 **Approvals Authority Voltage ratings Current ratings** VDE (EN 60934) AC 240 V; DC 50 V 20...70 A UL AC 240 V; DC 50 V 20...70 A 

## **Technical data** 

Voltage rating AC 240 V; DC 50 V Current rating range 20... 70 A 

Typical life                        300 operations at 2 x IN (DC 50 V) 500 operations at 2 x IN (DC 28 V) Ambient temperature -30...+60 °C  (-22...+140 °F) Insulation co-ordination rated impulse pollution (IEC 60664) withstand voltage degree 2.5 kV 2 (reinforced insulation in the mounting area) 

**==> picture [234 x 241] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||
|---|---|---|
|Dielectric strength|
|operating area|test voltage|
|AC 3,000 V|
|Insulation resistance           > 100 M|Ω|(DC 500 V)|
|Interrupting capacity Icn|800 A|
|Interrupting capacity|
|(UL 1077)|IN|UN|
|20...70 A|AC 240 V|1,000 A|
|20...60 A|AC 120 V|3,500 A|
|70 A|AC 120 V|2,000 A|
|20...50 A|DC   50 V|3,500 A|
|60...70 A|DC   50 V|2,000 A|
|Degree of protection|operating area IP40|
|(IEC 60529/DIN 40050)|terminal area IP00|
|Vibration                           8 g (57-500 Hz) ±0.61 mm (10-57 Hz)|
|to IEC 60068-2-6, test Fc|
|10 frequency cycles/axis|
|Shock                               25 g (11 ms)|
|to IEC 60068-27, test Ea|
|Corrosion|96 hours at 5 % salt mist,|
|to IEC 60068-2-11, test Ka|
|Humidity                            240 hours at 95 % RH|
|to IEC 60068-2-3, test Ca|
|Mass                                approx. 55 g|

**----- End of picture text -----**<br>


Issue G 

101 

Germany (0 91 87) 10-0  -  USA (847) 827-7600  -  UK (01296) 420336 - www.e-t-a.com 

**1** 

## **High Performance Thermal Circuit Breaker 4130-...** 

## **Typical time/current characteristics** 

## **Dimensions** 

**==> picture [499 x 545] intentionally omitted <==**

**----- Start of picture text -----**<br>
tightening torque max. 1.5 Nm 10000   60  ° C<br>M12x1 ø6.6   23  ° C<br>black .260<br>-30  ° C<br>1000<br>100<br>10<br>I 2<br>13.5 12 1<br>.531 .472<br>max. 3.5 22.3 screw M6x8 with washer 17<br>max .138 .878 tightening torque max. 2.5 Nm .669<br>0,1<br>D-shaped threadneck mounting hole 0,8 1 2 3 4 5 6 8 10 20 40<br>... times rated current<br>The time/current characteristic curve depends on the ambient temperature<br>prevailing. In order to eliminate nuisance tripping, please multiply the circuit<br>breaker current ratings by the derating factor shown below. See also<br>32 11.5 -0.1 section 9 – Technical information.<br>1.26 .453 -.004 Ambient temperature °F   -22 -4 +14 +32   +73.4 +104 +122<br>°C   -30 -20 -10  0 +23 +40 +50<br>Derating factor  0.68 0.76 0.84 0.92 1 1.08 1.16  1.24<br>Intstallation drawing Accessories<br>Hex nut with splash cover, black Water splash cover,<br>X 201 296 01 without O ring  (IP64) transparent with knurled<br>operating area<br>X 200 801 03 with O ring  (IP66) nut and O ring  (IP64)<br>Hex nut with splash cover, X 210 663 01<br>transparent<br>X 200 801 08 with O ring  (IP66)<br>M12x1 M12x1<br>I 2<br>Separate hardware Knurled nut<br>Hex nut Y 300 116 02 Y 302 065 01<br>mounting area<br>30 6 M12x1 M12x1 3.2<br>1.18 .236 .126<br>OFF ON<br>0.5 ± .020 ± 0.5 ± .020 ±<br>23.8 .937 17.2 .677 10.3 .406<br>0.60.2 ± .024.008 ±<br>50 1.97<br>64 2.52<br>Trip time in seconds<br>LINE<br>-0.1 -.004<br>12.2 .480<br>18 .709<br>5<br>.197<br>LINE<br>**----- End of picture text -----**<br>


The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section 9 – Technical information. Ambient temperature °F   -22 -4 +14 +32   +73.4 +104 +122 +140 °C   -30 -20 -10 0 +23 +40 +50 +60 Derating factor 0.68 0.76 0.84 0.92 1 1.08 1.16  1.24 

**==> picture [215 x 207] intentionally omitted <==**

**----- Start of picture text -----**<br>
Hex nut with splash cover, black Water splash cover,<br>X 201 296 01 without O ring  (IP64) transparent with knurled<br>X 200 801 03 with O ring  (IP66) nut and O ring  (IP64)<br>Hex nut with splash cover, X 210 663 01<br>transparent<br>X 200 801 08 with O ring  (IP66)<br>M12x1 M12x1<br>Separate hardware Knurled nut<br>Hex nut Y 300 116 02 Y 302 065 01<br>M12x1 M12x1 3.2<br>.126<br>SW14 2.5 ø17 0.5 x 45 °<br>.551 .098 .669 .020 x 45 °<br>**----- End of picture text -----**<br>


## **Internal connection diagram** 

**==> picture [249 x 114] intentionally omitted <==**

**----- Start of picture text -----**<br>
line  1<br>2<br>**----- End of picture text -----**<br>


This is a metric design and millimeter dimensions take precedence ~~(~~[mm ] inch ~~)~~ 

All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.Product markings may not be exactly as the ordering codes. Errors and omissions excepted. 

Issue G 

102 

�[Germany (0 91 87) 10-0  -  USA (847) 827-7600  -  UK (01296) 420336 - www.e-t-a.com]