4-1419104-0

General Purpose Relays Power Relays 

**Potter & Brumfield** 

## **T9A Series, DC Coil 30A PCB or Panel Mount Relay** 

> n **30A switching in 1 form A (NO) and 20A in 1 form C (CO)** 

> n **Plastic sealed case available** 

> n **Meets UL 508 and 873 spacing - 3.18mm through air, 6.36mm over surface** 

> n **Option for load connections via 0.250”” (6.35mm) Q.C. terminals** 

> n **UL class F insulation system standard** 

Typical applications HVAC,  Appliances, Industrial Controls 

**==> picture [32 x 14] intentionally omitted <==**

**----- Start of picture text -----**<br>
Z<br>**----- End of picture text -----**<br>


## ~~**Approvals**~~ UL E58304 

|~~**Approvals**~~<br>UL E58304|||||
|---|---|---|---|---|
|Technical data of approved types on request|Technical data of approved types on request|Technical data of approved types on request|||
|~~**Contact Data**~~|||||
|Contact arrangement|1 form A (NO), 1 form B (NC), 1 form C (CO)||||
|Rated voltage|||277VAC||
|Max. switching voltage|||277VAC||
|Rated current||30A|15A|20A/10A|
|Limiting continuous current||30A|||
|Contact material|||AgSnOInO, AgCdO||
|Min. recommended contact load|Min. recommended contact load|1A, 5VDC or 12VAC||1A, 5VDC or 12VAC|
|Initial contact resistance||75 mΩ at 1A at 5VDC or 12VAC|||
|Frequency of operation, with/without load||Frequency of operation, with/without load|360/3600hr||
|Operate/release time max., including bounce||Operate/release time max., including bounce|Operate/release time max., including bounce<br>15/15ms||



|**Contact ratings**1) (continued)|**Contact ratings**1) (continued)||
|---|---|---|
|Type|Load|Cycles|
|**UL 508/873**|||
|AgSnOInO, 1W coil|AgSnOInO, 1W coil||
|NO|30A, 240VAC, general purpose|100x103|
|NO|80LRA/30FLA, 240VAC|30x103|
|NC|10A, 250VAC, resistive|50x103|
|AgCdO, 900mW coil|||
|NO|30A, 240VAC, general purpose|100x103|
|NO|18A, 240VAC, resistive, 105°C|100x103|
|NC|15A, 240VAC, resistive|6x103|
|NO|30LRA/15FLA, 240VAC|100x103|
|NO|50LRA/16FLA, 120VAC|100x103|
|NO|30LRA/11FLA, 120VAC|200x103|



|Initial contact resistance<br>75 mΩ at 1A at 5VDC or 12VAC<br>Frequency of operation, with/without load<br>360/3600hr<br>Operate/release time max., including bounce<br>15/15ms|Initial contact resistance<br>75 mΩ at 1A at 5VDC or 12VAC<br>Frequency of operation, with/without load<br>360/3600hr<br>Operate/release time max., including bounce<br>15/15ms|75 mΩ at 1A at 5VDC or 12VAC<br>360/3600hr|NO<br>NO<br>NC<br>NO|30A, 240VAC, general purpose<br>18A, 240VAC, resistive, 105°C<br>15A, 240VAC, resistive<br>30LRA/15FLA, 240VAC|30A, 240VAC, general purpose<br>18A, 240VAC, resistive, 105°C<br>15A, 240VAC, resistive<br>30LRA/15FLA, 240VAC|30A, 240VAC, general purpose<br>18A, 240VAC, resistive, 105°C<br>15A, 240VAC, resistive<br>30LRA/15FLA, 240VAC|30A, 240VAC, general purpose<br>18A, 240VAC, resistive, 105°C|100x103<br>100x103<br>6x103<br>100x103|
|---|---|---|---|---|---|---|---|---|
|**Contact ratings**1)|||NO|50LRA/16FLA, 120VAC||||100x103|
|Type|Load|Cycles|NO|30LRA/11FLA, 120VAC||||200x103|
|**Factory**|||1) Contact ratings at 25°C (unless otherwise noteed) with relay properly vented. Remove|||1) Contact ratings at 25°C (unless otherwise noteed) with relay properly vented. Remove|||
|AgCdO, 1W coil|AgCdO, 1W coil||vent nib after soldering and cleaning.||vent nib after soldering and cleaning.||||
|NO|30A, 240VAC, general purpose|100x103|||||||
|NO|25A, 240VAC, resistive|100x103|Mechanical endurance|Mechanical endurance||||10x106ops.|
|CO|20A/10A, 240VAC, general purpose|100x103|||||||
|CO|20A/10A, 240VAC, resistive|100x103|||||||
|CO|20A/10A, 28VDC, resistive|100x103|~~**Coil Data**~~|~~**Coil Data**~~|||||
|**UL 508/873**|||Coil voltage range|Coil voltage range|||5 to 110VDC||
|AgCdO, 1W coil|AgCdO, 1W coil||Max. coil power|||110% of nominal|||
|NO|30A, 240VAC, general purpose|100x103|Max. coil temperature||||155°C||
|NC|15A, 240VAC, general purpose|100x103|Coil insulation system according UL|||Coil insulation system according UL|Class F||
|CO|20A/10A, 240VAC, general purpose|100x103|**Coil versions, DC coil**||||||
|NC|20A, 240VAC, resistive|6x103|Coil|Rated|Operate|Release|Release<br>Coil|Rated coil|
|CO|16.75A/13.4A, 240VAC, resistive|6x103|code|voltage|voltage|voltage|resistance|power|
|NO|80LRA/30FLA, 240VAC|30x103||VDC|VDC|VDC|Ω±10%|W|
|NC|30LRA/12FLA, 240VAC|30x103|Code D (1W) coil||||||
|CO|53.6LRA/20FLA / 20LRA/8FLA, 240VAC|30x103|5|5|3.75|0.5|25|1|
|NO|98LRA/22FLA, 120VAC|100x103|6|6|4.5|0.6|36|1|
|NO|2HP, 240VAC|1x103|9|9|6.75|0.9|81|1|
|NC|1/2HP, 240VAC|1x103|12|12|9|1.2|144|1|
|NO|1HP, 125VAC|1x103|15|15|11.25|1.5|225|1|
|NC|1/4HP, 125VAC|1x103|18|18|13.5|1.8|324|1|
|NO|10A, 277VAC, ballast|6x103|24|24|18|2.4|576|1|
|NC|3A, 277VAC, ballast|6x103|48|48|36|4.8|2304|1|
|NO|8.3A, 120VAC, tungsten|6x103|110|110|82.5|11|12100|1|
|NO|5.4A, 277VAC, tungsten|6x103|Code L (900mW) coil||||||
|NO|470VA, 120VAC, pilot duty|30x103|5|5|3.75|0.5|27|.9|
|NO|20A, 28VDC, resistive|100x103|6|6|4.5|0.6|40|.9|
|NC|10A, 28VDC, resistive|100x103|9|9|6.75|0.9|97|.9|
|AgCdO - Enhanced Version Only, 1W coil|||12|12|9|1.2|155|.9|
|NO|21A, 250VAC, resistive|250x103|15|15|11.25|1.5|256|.9|
|NO|25A, 277VAC, resistive|100x103|18|18|13.5|1.8|380|.9|
|AgCdO, 1W coil (“H” type)|AgCdO, 1W coil (“H” type)||24|24|18|2.4|660|.9|
|NO|25A, 240VAC, resistive, 105°C                                 6x10|C                                 6x103|48|48|36|4.8|2560|.9|
|1)  Contact ratings at 25°C (unless otherwise noteed) with relay properly vented. Remove|||110|110|82.5|11|13450|.9|



- 1)  Contact ratings at 25°C (unless otherwise noteed) with relay properly vented. Remove vent nib after soldering and cleaning. 

All figures are given for coil without preenergization, at ambient temperature +23°C. 

> 1 ~~reece~~ eee e ~~erence~~ 03-2025, Rev. 0125 Datasheets and product specification www.te.com 

~~eee ee~~ Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ secterms of the disclaimer and all chapters of tion, application notes and all specifications the ‘Definitions’ section, available at are subject to change. http://relays.te.com/definitions 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

© 2025 Tyco Electronics Corporation, a TE Connectivity Plc. company 

General Purpose Relays Power Relays 

**Potter & Brumfield** 

## **T9A Series, DC Coil 30A PCB or Panel Mount Relay** (Continued) 

## ~~**Coil Data** (continued)~~ 

## **Ambient temperature vs. coil voltage – 1W coil** 

Data below are average values and should be verified in application. Tests were conducted within a 2’ (.6 m) cube (still air); at nominal coil power @ 25°C; with normally open contact loaded; and with 4’ (1.22 m) long, #10 AWG load wires. P.C. board relays were mounted to a 30A, single side P.C. board. Coil rise test conducted with a 30A PC board to maintain 20°C max. rize at 30°C. The relay connections and wiring must be designed with an adequate cross section to ensure proper current fow and heat dissipation. 

## ~~**Insulation Data**~~ 

|Initial dielectric strength||
|---|---|
|between open contacts|1500Vrms|
|between contact and coil|2500Vrms|
|Initial surge withstand voltage||
|between contact and coil|6kV|
|Initial insulation resistance||
|between insulated elements|1x109Ω|
|Clearance/creepage||
|between contact and coil|3.18mm clearance/6.3638mm|



**==> picture [521 x 351] intentionally omitted <==**

**----- Start of picture text -----**<br>
140<br>120 eeeee<br>Other Data<br>100 SS Se Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content<br>80 I refer to the Product Compliance Support Center at<br>60 Oo SSS 10A0A Ambient temperature www.te.com/customersupport/rohssupportcenter<br>20A DC coil  -55ºC to 85ºC  [3)]<br>40<br>eses 105°C models available<br>Wash-Tight Relay, Vented  [(2] , 30A<br>20 Load Connections Via Q.C. Terminals, Category of environmental protection<br>060 PEE PC Mount80 100 120 140 160 180 IEC 61810   RT0 - open, RTI - dust protected,   RTII - fux proof, RTIII - wash tight<br>Applied Coil Voltage (% of Rated Voltage) Pf = Vibration resistance (functional)  1.65mm max excursions, 10-55 Hz<br>140 Shock resistance (functional)  10g for 11msec<br>Shock resistance (destructive)  100g<br>120 a Terminal type   pcb-tht and pcb-tht + quick connect<br>Weight  26g  mounting code 1<br>100 SS<br>33g mounting codes 2 and 5<br>0A<br>80 SS 10A20A Resistance to soldering heat  THTIEC 60068-2-20  250°C<br>60 Dust Protected Relay,Flange Mount 30A Packaging/unit                     tray/50 pcs., bundle/250 pcs., box/500 pcs.<br>4060 e 80 100 | TT 120 e 140 160 180 I 3)  Operating ambient temperature must consider “Must Operate Voltage Change Over  Temperature,” Contact Temperature Rise, Coil Temperature Rise (If coil is not allowed to<br>Applied Coil Voltage (% of Rated Voltage) cool) and Maximum Coil Temperature. Specification ambient considers 20A load with<br>coil cooled to ambient.<br>140<br>120<br>ee<br>100 S=_<br>80 SS<br>60<br>SS 0A<br>10A<br>40 NN<br>20A<br>20 Wash-Tight Relay, Vented  [(2]<br>PC Terminals For Coil & Contacts 30A<br>0 S STr<br>60 80 100 120 140 160 180<br>Applied Coil Voltage (% of Rated Voltage)<br>2) Remove knock-off nib after cleaning process for optimum life of wash-tight relays.<br>Max. Alowable<br> Ambient Temp. (C)<br>Max. Alowable<br> Ambient Temp. (C)<br>Max. Alowable<br>Ambient Temp. (C)<br>**----- End of picture text -----**<br>


## **Dimensions** 

T9AS/V – Mounting and termination code 2 

**==> picture [249 x 120] intentionally omitted <==**

**----- Start of picture text -----**<br>
 .250 x .032    QUICK<br>.130  .020<br>     (6.35 x .81) CONNECT (3.30  .51) | je<br>Ø .03<br>(.80)<br>2 PLACES<br>.045 x .045<br>1.280 MAX. (1.14 x 1.14)<br>ei (32.51)<br>.032 x .062<br>_—— (.81 x 1.57)<br>= n<br>1.080 MAX. 1.100 MAX.<br>rr (27.43) (27.94)<br>COM<br>NO<br>NC<br>**----- End of picture text -----**<br>


Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

T9AP – Mounting and termination code 5 

**==> picture [240 x 150] intentionally omitted <==**

**----- Start of picture text -----**<br>
.187 x .020 1.080 MAX.<br> (4.75 x .508)QUICK k= (27.43) — <— 1.100 MAX.(27.94)<br>  CONNECT<br> .250 x .032<br>(6.35 x .81)<br>QUICK<br>CONNECT 1.980 MAX.<br>(50.29)<br>EE] 1.713 ± .010 |<br>(43.51 ± .25) 1.280 MAX.<br>IN (32.51)<br>=<br>=) |<br>==<br>Ay<br>AS .071 (1.80) RAD. FOR #6 SCREW<br>Note:  Recommended mounting screw torque is 4.0-5.0 lbs.in when #6 screw is used.<br>COM<br>NO<br>NC<br>**----- End of picture text -----**<br>


Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ secterms of the disclaimer and all chapters of tion, application notes and all specifications the ‘Definitions’ section, available at are subject to change. http://relays.te.com/definitions 

2 

03-2025, Rev. 0125 www.te.com © 2025 Tyco Electronics Corporation, a TE Connectivity Plc. company 

General Purpose Relays Power Relays 

**Potter & Brumfield** 

## **T9A Series, DC Coil 30A PCB or Panel Mount Relay** (Continued) 

## **Dimensions** 

**==> picture [253 x 127] intentionally omitted <==**

**----- Start of picture text -----**<br>
T9AS/V - Mounting and termination code 1<br>.805 MAX.<br>(20.4) .130 + .016        – .010 .212 MAX.(5.38) .032 x .062<br>3.30 + .41 (.8 x 1.6)<br>(           –.25) TERMINALS<br>.50 .10 MAX.<br>.69 (12.8) (2.54)<br>(17.6)<br>|<br>1.280 MAX.<br>(32.51) \<br>.045 x .045<br>(1.14 x 1.14)<br>_ 1.08 MAX.(27.43) .016(.43) I TERMINALSØ (.80).03 TERMINAL<br>**----- End of picture text -----**<br>


**Terminal assignment** Bottom view on pins 

|1 Form A<br>1 Form B<br>aS|1 Form C|
|---|---|



**PCB layout** Bottom view on pins 

**Notes:** 

1) General tolerance **Diagram Dimensions Tolerance** <1mm ±0.1 1~3mm ±0.2 >3mm ±0.3 ~~DT~~ 2) Dimensions of the pins after tin soldering for PCB type a) +0.2 for the widht and thickness 

b) +0.5 for the lenght 

T9AS/V - Mounting and termination code 2 T9AS/V - Mounting and termination code 1 

> .140 MAX. .212 MAX. 

> (3.56) fle .250 MAX.(6.35) : .081 ± .005 DIA. (2.06 ± .13) 7ee (5.38) .081 ± .005 DIA. (2.06 ± .13) .300 .100 (7.62).300 (2.54).100 .078 ± .003 DIA. (1.98 ± .08) Only necessary terminals are present on single throw models. (7.62) (2.54) .078 ± .003 DIA. (1.98 ± .08) Only necessary terminals are present on single throw models. Consequently, some holes will .600 Consequently, some holes will (15.24).600 (12.7).500 .043 ± .003 DIA. (1.09 ± .08) be unnecessary for single throw models. (15.24) (12.7).500 .043 ± .003 DIA. (1.09 ± .08) be unnecessary for single throw models. .150 .150 (3.81) (3.81) .550 .550 (13.97) (13.97) .700 sai (17.78).700 seq (17.78) **Product code structure** Typical product code **T9A S 5 D 2 2 -12 Type T9A** Power PCB or panel mount relay T9A **Enclosure P** Dust protected plastic case (requires mounting code 5) **S** Wash-tight plastic case with knock off nib[1)] (requires mounting code 1 or 2) **V** Flux-proof plastic case (requires mounting code 1 or 2) **Contact arrangement 1** 1 form A (1 NO) **2** 1 form B (1 NC) **5** 1 form C (1 CO) ~~—_f~~ **Coil Input D** DC voltage, 1W **L** DC voltage, 900mW **H**[2)] DC voltage, 1W (+0/-10 percent coil resistance) **Mounting and termination 1** PCB mounting; PCB terminals for coil and contacts (only available with enclosure code N, S or V) **2** PCB mounting; PCB term. for coil and contacts; 6.35mm (.250in) QC for contacts (only available with enclosure code N, S or V) **5** Flanged mounting; 4.75mm (.187) QC for coil; 6.35mm (.250in) QC for contacts (only available with enclosure code P) **Contact material 2** AgCdO **4** AgSnOInO **7** AgCdO (Enhanced version) **Coil voltage** Coil code: please refer to coil versions table 

1) “With knock off nib” , a sperate PN and description will be provided for code 1, please contact TE for details. 2) “H” type coil is only available in mounting termination options 2 & 5. 

www.te.com 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ secterms of the disclaimer and all chapters of tion, application notes and all specifications the ‘Definitions’ section, available at are subject to change. http://relays.te.com/definitions 

3 

03-2025, Rev. 0125 

© 2025 Tyco Electronics Corporation, a TE Connectivity Plc. company 

General Purpose Relays Power Relays 

**Potter & Brumfield** 

## **T9A Series, DC Coil 30A PCB or Panel Mount Relay** (Continued) 

|T9AP1D52-12<br>T9AP1D52-24<br>T9AP1D52-48<br>T9AP1D54-24<br>T9AP5D52-12<br>T9AP5D52-24<br>T9AP5D52-48<br>T9AP5D54-12<br>T9AP5D54-24<br>T9AS1D12-5<br>T9AS1D12-9<br>T9AS1D12-12<br>T9AS1D12-15<br>T9AS1D12-18<br>T9AS1D12-24<br>T9AS1D12-48<br>T9AS1D12-110<br>T9AS1D14-9<br>T9AS1D14-12<br>T9AS1D14-24<br>T9AS1D22-5<br>T9AS1D22-12<br>T9AS1D22-24<br>T9AS1D22-48<br>T9AS1D22-110<br>T9AS1L12-12<br>T9AS1L12-24<br>T9AS1L14-24<br>T9AS1L22-18<br>T9AS2L22-24<br>T9AS5D12-5<br>T9AS5D12-12<br>T9AS5D12-18<br>T9AS5D12-24<br>T9AS5D12-48<br>T9AS5D12-110<br>T9AS5D22-5<br>T9AS5D22-12<br>T9AS5D22-24<br>T9AS5D22-110<br>T9AS5L12-12<br>T9AS5L22-18<br>T9AS5L22-24<br>T9AS5L22-48<br>T9AV1D12-12<br>T9AV1D12-18<br>T9AV1D22-18<br>T9AV1D22-24<br>T9AV1D22-48<br>T9AV1L12-12<br>T9AV1L22-24<br>T9AV2D22-24<br>T9AV5D12-24<br>T9AV5D22-18<br>T9AV5D22-24|Unsealed, plastic dust cover 1 form A, 1 NO|Unsealed, plastic dust cover 1 form A, 1 NO|1W|Flanged mount, QC|AgCdO|12VDC<br>~~Ld~~|6-1419102-0<br>6-1419102-3<br>5-1419102-8<br>7-1423091-3<br>5-1419102-4<br>5-1419102-2<br>6-1419102-4<br>7-1423091-4<br>7-1423091-5<br>2-1393210-0<br>2-1393210-2<br>1-1393210-3<br>1-1393210-4<br>1-1393210-5<br>1-1393210-8<br>1-1393210-9<br>1-1393210-2<br>2-2071229-5<br>5-1423091-7<br>6-1423091-3<br>2-1419104-3<br>1-1419104-7<br>2-1419104-1<br>2-1419104-2<br>1-1419104-6<br>2-1393210-4<br>2-1393210-5<br>2-2071229-7<br>2-1419104-6<br>1423794-1<br>3-1393210-9<br>3-1393210-3<br>3-1393210-4<br>3-1393210-7<br>3-1393210-8<br>3-1393210-2<br>3-1419104-9<br>3-1419104-3<br>3-1419104-6<br>3-1419104-2<br>4-1393210-1<br>4-1419104-0<br>4-1419104-1<br>9-1419136-6<br>4-1393210-3<br>5-1393210-2<br>4-1419148-8<br>5-1419148-0<br>2-1423091-3<br>1-1423091-8<br>4-1419104-2<br>1419137-1<br>4-1393210-8<br>5-1419148-2<br>1419137-2|
|---|---|---|---|---|---|---|---|
|||||||24VDC<br>~~Ld~~<br>~~|~~||
|||||||48VDC<br>~~|~~<br>~~|~~||
||||||AgSnOInO<br>~~ee~~|24VDC<br>~~|~~<br>~~ee~~||
|||1 form C, 1 CO|||AgCdO<br>~~ee~~<br>~~|~~|12VDC<br>~~ee~~<br>~~|~~||
|||||||24VDC<br>~~|~~<br>~~[|~~<br>~~|~~||
|||||||48VDC<br>~~[|~~<br>~~|sd~~||
||||||AgSnOInO<br>~~|~~<br>~~_——~~<br>~~|~~|12VDC<br>~~|sd~~<br>~~——~~<br>~~|~~||
|||||||24VDC<br>~~——~~<br>~~|id~~||
||Wash tight, knock off nib<br>~~|~~|1 form A, 1 NO<br>~~|~~||pcb terminals|AgCdO<br>~~_——~~<br>~~|~~<br>~~|~~<br>~~|~~<br>~~||~~<br>~~|~~|5VDC<br>~~——~~<br>~~|id~~<br>~~|~~<br>~~|~~||
|||||||9VDC<br>~~|~~<br>~~|~~||
|||||||12VDC<br>~~||~~<br>~~|~~||
|||||||15VDC<br>~~|~~<br>~~|~~||
|||||||18VDC<br>~~||~~<br>~~||~~||
|||||||24VDC<br>~~|~~<br>~~||~~||
|||||||48VDC<br>~~||sd~~<br>~~|~~||
|||||||110VDC<br>~~||~~<br>~~|~~||
||||||AgSnOInO<br>~~|~~<br>~~|~~|9VDC<br>~~|[|~~<br>~~|~~||
|||||||12VDC<br>~~[|~~<br>~~|sd~~||
|||||||24VDC<br>~~|sd~~<br>~~[|~~||
|||||pcb + QC|AgCdO<br>~~|~~<br>~~|~~<br>~~|~~|5VDC<br>~~[|~~<br>~~|~~||
|||||||12VDC<br>~~|~~<br>~~|~~<br>~~|~~||
|||||||24VDC<br>~~|~~<br>~~|~~||
|||||||48VDC<br>~~||~~<br>~~|~~||
|||||||110VDC<br>~~|~~<br>~~|~~||
||||900mW|pcb terminals||12VDC<br>~~||~~<br>~~|~~||
|||||||24VDC<br>~~|~~||
||||||AgSnOInO<br>~~|~~<br>~~ee~~|24VDC<br>~~|~~<br>~~ee~~||
|||||pcb + QC<br>~~|~~|AgCdO<br>~~ee~~<br>~~|~~<br>~~|~~|18VDC<br>~~ee~~<br>~~—~~||
|||1 form B,1 NC<br>~~|~~||||24VDC<br>~~—~~<br>~~[|~~<br>~~|~~||
|||1 form C, 1 CO<br>~~|~~|1W|pcb terminals<br>~~|~~||5VDC<br>~~—~~<br>~~[|~~<br>~~|sd~~||
|||||||12VDC<br>~~|~~<br>~~|~~<br>~~|~~||
|||||||18VDC<br>~~|~~<br>~~|sd~~||
|||||||24VDC<br>~~|~~<br>~~|~~||
|||||||48VDC<br>~~|~~<br>~~—~~||
|||||||110VDC<br>~~—~~||
|||||pcb + QC|AgCdO<br>~~|~~|||
|||||||12VDC<br>24VDC<br>110VDC<br>12VDC<br>18VDC<br>24VDC<br>48VDC<br>12VDC<br>~~—~~<br>~~—~~||
||||900mW|pcbterminals||||
|||||pcb + QC||||
||Vented, flux tight<br>~~|~~<br>~~LR~~|1 form A, 1 NO<br>~~|~~<br>~~LR~~|1W<br>~~LR~~|pcb terminals<br>~~LR~~||||
|||||||18VDC<br>~~—~~||
|||||pcb + QC<br>~~LR~~||||
|||||||24VDC<br>48VDC<br>12VDC<br>~~—~~||
||||900mW<br>~~LR~~|pcbterminals<br>~~LR~~||||
|||||pcb + QC<br>~~al~~<br>~~|~~<br>~~LR~~||24VDC<br>~~—~~<br>~~—~~||
|||1 form B,1NC<br>~~|~~<br>~~LR~~|1W<br>~~|~~<br>~~LR~~|||||
|||1 form C, 1CO<br>~~|~~<br>~~LR~~||pcbterminals<br>~~al~~<br>~~|~~<br>~~LR~~||||
|||||pcb + QC<br>~~al~~<br>~~|~~<br>~~LR~~||18VDC<br>~~—~~<br>~~—~~<br>~~|~~||
|||||||24VDC<br>~~—~~<br>~~|~~||



4 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

03-2025, Rev. 0125 www.te.com © 2025 Tyco Electronics Corporation, a TE Connectivity Plc. company 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions