4-1393788-8

Signal Relays 

**AXICOM** 

## **P2 Relay V23079** 

## n **Standard telecom relay (ringing and test access)** 

## n **Slim line 15x7.5mm (.590x.295”)** 

## n **Max. switching current 5A** 

## n **2 form C bifurcated contacts (2 changeover contacts, 2 CO)** 

## n **Immersion cleanable** 

> n **High sensitivity for low power consumption 140mW/ 70mW** 

## n **Single coil version with surge voltage resistance between contact and coil: 2.5kV (2/10μs) meets the Telcordia Requirement GR-1089, 1.5kV (10/160μs) meets FCC Part 68** 

## Typical applications 

Communications equipment linecard application (ringing and test access), PABX, voice over IP, office equipment, measurement and control equipment, automotive equipment as CAN bus, keyless entry, speaker switch, medical equipment, consumer electronics, set top boxes, HiFi 

## ~~**Approvals**~~ 

|UL 508 File No. E 111441, UL 60950,||
|---|---|
|IEC/EN60950 IEC Ref. Cert. No. 327||
|Technical data of approved types on request||
|~~**Contact Data**~~||
|Contact arrangement|2 form C (CO)|
|Max. switching voltage|220VDC, 250VAC|
|Rated current|2A|
|Limiting continuous current, 85°C|2A|
|Switching Power|60W, 62.5VA|
|Contact material|AgNi, gold-covered|
|Contact style|bifurcated contact|
|Minimum switching voltage|100μV|
|Thermoelectrical potential|<10µV|
|Initial contact resistance|<50mΩ at 10mA, 20mV|
|Frequency of operation, without load|50 operations/s|
|Operate time|typ. 2ms, max. 4ms|
|Set/reset time|typ. 2ms, max. 4ms|
|Release time||
|without diode in parallel|typ. 2ms, max. 4ms|
|with diode in parallel|typ. 4ms, max. 6ms|
|Bounce time|typ. 1ms, max. 3ms|
|Electrical endurance||
|at 12V / 10mA<br>at 6V / 100mA<br>at 60V / 500mA<br>at 30V / 1000mA<br>at 30V / 2000mA<br>Contact ratings, UL<br>120VAC / 0.5A - 60VA<br>Mechanical endurance|typ. 5x107operations<br>typ. 1x107operations<br>typ. 5x105operations<br>typ. 1x106operations<br>typ. 2x105operations<br>110VDC / 0.3A - 33W<br>30VDC /  2.0A - 60W<br>120VAC / 0.5A - 60VA<br>240VAC / 0.25A-60VA<br>typ. 100x106operations|



**==> picture [189 x 171] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mechanical endurance  typ. 100x10 [6]<br>Max. DC load breaking capacity<br>ee<br>_SONI<br>100ENE<br>a<br>a a A<br>a<br>sol _| TT TTIN TT Tt tT<br>40LENO<br>sopNUT<br>20 | recommended Plime<br>10 ALL MEH<br>0,1 0,2 05 1 2 5 10 20<br>DC current [A]<br>DC voltage [VDC]<br>**----- End of picture text -----**<br>


## Z 

|~~**Coil Data**~~|~~**Coil Data**~~|||||||
|---|---|---|---|---|---|---|---|
|Magnetic system|Magnetic system|||polarized||||
|Coil voltage range||||2~~to 2~~||~~to 2~~4VDC||
|Max. coil temperature|Max. coil temperature||||125°C|||
|Thermal resistance||||< 125K/W|< 125K/W|||
|**Coil versions, monostable**||||||||
|Coil|Rated|Operate|Limiting|Release||Coil|Rated coil|
|code|voltage|voltage|Voltage|voltage||resistance|resistance<br>power|
||VDC|VDC|VDC|VDC|VDC|Ω±10%|mW|
|008|3.00|2.25|6.50|0.30|0.30|64|140|
|016|4.00|3.00|8.70|0.40|0.40|114|140|
|011|4.50|3.38|9.80|0.45|0.45|145|140|
|001|5.00|3.75|10.90|0.50|0.50|178|140|
|002|6.00|4.50|13.00|0.60|0.60|257|140|
|006|9.00|6.75|19.60|0.90|0.90|578|140|
|003|12.00|9.00|26.15|1.20|1.20|1029|140|
|005|24.00|18.00|52.30|2.40|2.40|4114|140|



All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. 

**==> picture [188 x 148] intentionally omitted <==**

**----- Start of picture text -----**<br>
2.8 140 mW<br>2.6 Umax. at 0 A<br>2.4 Umax. at 2 x 1 A<br>2.2 Umax. at 2 x 2 A<br>2<br>1.8<br>1.6<br>1.4<br>1.2<br>1 Unom. nominal coil voltage<br>0.8<br>0.6 Uop. min.<br>0.4 Urel. min.<br>0.2<br>0<br>-40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140<br>Ambient Temperature [°C]<br>Coil Voltage [U/Unom]<br>**----- End of picture text -----**<br>


Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

1 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

01-2017, Rev.0117 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

Signal Relays 

**AXICOM** 

## **P2 Relay V23079** (Continued) 

|~~**Coil Data**(continued)~~|~~**Coil Data**(continued)~~|~~**Coil Data**(continued)~~|~~**Coil Data**(continued)~~|~~**Coil Data**(continued)~~|||||||||||||||||||~~**Insulation Data**~~|~~**Standard**~~<br>~~**HDV**~~|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
||||||||||||||||||||||||Initial dielectric strength||
|**Coil versions, bistable**|||||||||||||||||||||||between open contacts|1000Vrms<br>1500Vrms|
|Coil|Rated||||Set|Set|||Limiting||Limiting||Reset|||||Coil|||Rated coil||between contact and coil|1500Vrms<br>1500Vrms|
|code|voltage||voltage||||voltage||Voltage||Voltage||voltage|||resistance<br>power|||||||between adjacent contacts|1000 Vrms<br>1500Vrms|
||VDC|VDC||VDC||VDC|||VDC||||VDC||VDC||Ω±10%||||Ω±10%<br>mW||Initial surge withstand voltage||
|**Bistable, 1 coil**|||||||||||||||||||||||according to Telcordia TR-NWT-001089 (2/10μs)||
|108|3.00|3.00|||2.25||||9.2||||-2.25||-2.25|||128|||70||between open contacts|2000V<br>2500V|
|111|4.50|4.50|||3.38||||13.85||||-3.38||-3.38|||289|||70||between contact and coil|2500V<br>2500V|
|101|5.00|5.00|||3.75||||15.33||||-3.75||-3.75|||357|||70||between adjacent contacts|2500V<br>2500V|
|102|6.00|6.00|||4.50||||18.5||||-4.50||-4.50|||514|||70||according to (10/700 μs IEC 60950)||
|106|9.00|9.00|||6.75||||27.75||||-6.75||-6.75|||1157|||70||between open contacts|2000V<br>2500V|
|103|12.00||||9.00||||37||||-9.00||-9.00|||2057|||70||between contact and coil|2500V<br>2500V|
|105|24.00||18.00||||||74||||-18.00||18.00|||8228|||70||between adjacent contacts|2500V<br>2500V|
|**Bistable, 2 coil**|||||||||||||||||||||||Initial insulation resistance at 500 Vdc|Initial insulation resistance at 500 Vdc<br>> 109Ω|
|219|2.00|2.00|||1.50||||4.33||||1.50||1.50|||28||28|140||Capacitance||
|218|2.40|2.40|||1.80||||5.2||||1.80|||||41||41|140||between open contacts|max. 1pF|
|208|3.00|3.00|||2.25||||6.5||||2.25||2.25|||64||64|140||between contact and coil|max. 2pF|
|211|4.50|4.50|||3.38||||9.8||||3.38||3.38|||145|||140||between adjacent contacts|max. 1.5pF|
|201|5.00|5.00|||3.75||||10.9||||3.75||3.75|||178|||140||Clearance /creepage||
|202|6.00|6.00|||4.50||||13||||4.50||4.50|||257|||140||according to IEC / EN 60950|1.3/2.5mm|
|206|9.00|9.00|||6.75||||19.6||||6.75||6.75|||578|||140||||
|203|12.00||||9.00||||26.15||||9.00||9.00|||1029|||140||||
|205|24.00||18.00||||||52.3||||18.00||18.00|||4114|||140||~~**Other Data**~~||
|All figures are given for coil without pre-energization, at ambient temperature +23°C.||||All figures are given for coil without pre-energization, at ambient temperature +23°C.|||||||||All figures are given for coil without pre-energization, at ambient temperature +23°C.|||All figures are given for coil without pre-energization, at ambient temperature +23°C.|||||All figures are given for coil without pre-energization, at ambient temperature +23°C.||Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content||
|Other coil voltages on request.|||||||||||||||||||||||refer to the Product Compliance Support Center at||
||3.4||||||||||||||||70 mW||70 mW||||www.te.com/customersupport/rohssupportcenter||
|Coil Voltage [U/Unom]|0.4<br>0.6<br>0.8<br>1<br>1.2<br>1.4<br>1.6<br>1.8<br>2<br>2.2<br>2.4<br>2.6<br>2.8<br>3<br>3.2<br>Unom.nominal coil voltage||||||nominal coil voltage||||||Uop. min.<br>Umax.at 0 A<br>Umax.at 2 x 2 A<br>Umax.at 2 x 1 A||||||at 0 A<br>at 2 x 2 A<br>at 2 x 1 A||||Ambient temperature<br>-40 to +85°C<br>Category of environmental protection<br>IEC 61810<br>RT III - wash tight<br>Vibration resistance (functional)<br>35g, 10 to 1000Hz<br>Shock resistance (functional)<br>IEC 60068-2-27  (half sine)<br>100g<br>Terminal type<br>PCB-THT,<br>SMT long and short terminals<br>Weight<br>max. 2.8 g<br>Resistance to soldering heat  THT<br>IEC 60068-2-20<br>265°C/10s<br>Moisture sensitive level, JEDEC J-Std-020D<br>MSL3||
||0.2||||||||||||||||||||||related only to SMT relays||
||0||||||||||||||||||||||packed in orginal dry-packs||
||-40<br>-30<br>-20<br>-10<br>0<br>10<br>Ambient Temperature [°C]||||||20<br>30<br>40<br>50<br>60<br>Ambient Temperature [°C]||||||70<br>80<br>90 100 110 120 130 140<br>Ambient Temperature [°C]||||||||||Ultrasonic cleaning<br>Packaging/unit|not recommended|
|**Coil versions, high dielectric version, monostable, overmolded**|||||||||**Coil versions, high dielectric version, monostable, overmolded**||**Coil versions, high dielectric version, monostable, overmolded**||||||**Coil versions, high dielectric version, monostable, overmolded**|**Coil versions, high dielectric version, monostable, overmolded**|||||THT|box/2000 pcs.|
|Coil|Rated||Operate||||Operate||Limiting|Limiting|Limiting||Release|||Release||Coil|||Rated coil||SMT|reel/2000 pcs. or 2500 pcs.|



**==> picture [253 x 409] intentionally omitted <==**

**----- Start of picture text -----**<br>
3.4 70 mW<br>3.2<br>3 Umax. at 0 A<br>2.8 Umax. at 2 x 1 A<br>2.6 Umax. at 2 x 2 A<br>2.4<br>2.2<br>2<br>1.8<br>1.6<br>1.4<br>1.2<br>1 Unom. nominal coil voltage<br>0.8<br>0.6 Uop. min.<br>0.4<br>0.2<br>0<br>-40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140<br>Ambient Temperature [°C]<br>Coil versions, high dielectric version, monostable, overmolded<br> Coil  Rated  Operate  Limiting  Release  Coil  Rated coil<br> code  voltage  voltage  Voltage  Voltage  res istance  power<br>VDC  VDC  VDC  VDC  Ω±10%  mW<br> 008  3.00  2.25  6.1  0.30  45  200<br> 001  5.00  3.75  10.1  0.50  125  200<br> 002  6.00  4.50  12.1  0.60  180  200<br> 006  9.00  6.75  18.2  0.90  405  200<br> 003  12.00  9.00  24.2  1.20  720  200<br>All figures are given for coil without pre-energization, at ambient temperature +23°C.<br>Other coil voltages on request.<br>200 mW<br>2.8<br>2.6 Umax. at 0 A<br>2.4 Umax. at 2 x 1 A<br>Umax. at 2 x 2 A<br>2.2<br>2<br>1.8<br>1.6<br>1.4<br>1.2<br>1 Unom. nominal coil voltage<br>0.8<br>0.6 Uop. min.<br>0.4 Urel. min.<br>0.2<br>0<br>-40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140<br>Ambient Temperature [°C]<br>Coil Voltage [U/Unom]<br>Coil Voltage [U/Unom]<br>**----- End of picture text -----**<br>


Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

2 

Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ secterms of the disclaimer and all chapters of tion, application notes and all specifications the ‘Definitions’ section, available at are subject to change. http://relays.te.com/definitions 

01-2017, Rev. 0117 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

**AXICOM** 

## Signal Relays 

**==> picture [119 x 11] intentionally omitted <==**

**----- Start of picture text -----**<br>
P2 Relay V23079  (Continued)<br>**----- End of picture text -----**<br>


## **Terminal assignment** 

TOP view on component side of PCB 

Monostable version 

**==> picture [365 x 80] intentionally omitted <==**

**----- Start of picture text -----**<br>
Bistable version, 1-coil Bistable version, 2-coils<br>Contacts are shown in reset<br>a ly [] a 1) [)_f) condition.<br>Both coils can be used as<br>$0: 78i 5C13 - : :20 + 1385 either set or reset coils.<br>+] - "113.45 + f-" 11346] 7 5 4] - Contact position might change<br>during transportation and must<br>L i) J L 1} TT be reset before use.<br>**----- End of picture text -----**<br>


## **PCB layout** 

TOP view on component side of PCB 

**==> picture [40 x 70] intentionally omitted <==**

**----- Start of picture text -----**<br>
THT version<br>Oririentationi<br>PtNeat<br>of (Hi<br>**----- End of picture text -----**<br>


**==> picture [248 x 91] intentionally omitted <==**

**----- Start of picture text -----**<br>
SMT, long terminals SMT, short terminals<br>5 x 2,54 5 x 2.54<br>;M2 idee ti al?ahs i112 AA<br>fh) Bae or Hypa<br>0,9  ±0,1<br>**----- End of picture text -----**<br>


## **Dimensions** 

**==> picture [45 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
Standard coil<br>**----- End of picture text -----**<br>


**==> picture [116 x 254] intentionally omitted <==**

**----- Start of picture text -----**<br>
THT version<br>14.5±0.1 7.2±0.1<br>0.5±0.05<br>Overmolded coil, high dielectric version<br>THT version<br>14.6±0.1 7.2±0.1<br>f<br>0.5±0.05<br>el.<br>0.55-0.15 .8±0.1<br>9<br>3.25-0.25<br>0.45<br>9.5±0.1<br>3.25-0.25<br>**----- End of picture text -----**<br>


Overmolded coil, high dielectric version 

SMT, long terminals SMT, short terminals 

SMT, long terminals 

SMT, short terminals 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

3 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

01-2017, Rev.0117 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

Signal Relays 

**AXICOM** 

## **P2 Relay V23079** (Continued) 

## **Processing** 

**==> picture [241 x 288] intentionally omitted <==**

**----- Start of picture text -----**<br>
300 Recommended soldering conditions<br>Vapour phase soldering 20 to 40s full line: typical<br>woof 240°C Ee dotted line: process limits<br>200 Stitt,<br>180°C<br>150 130°C forced cooling “s<br>external preheating<br>100 100°C .<br>50 Vapour phase soldering temperature/time profile<br>(lead and housing peak temp.)<br>Do<br>Oo 50 100 150 200 Time [s] 250<br>Recommended reflow soldering profile<br>250 Infrared soldering —<br>temperature/time profile<br>(lead and housing peak temp.)<br>7180 UZ memcos\<br>max. 6<br>150 | 60s 7<br>max. 3 °C/s<br>25<br>Time [s] 250<br>Temperature [°C]<br>Temperature [°C]<br>**----- End of picture text -----**<br>


**Packing** 

## Reel dimensions 

01-2017, Rev. 0117 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

4 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

**AXICOM** 

## Signal Relays 

## **P2 Relay V23079** (Continued) 

**==> picture [526 x 610] intentionally omitted <==**

**----- Start of picture text -----**<br>
\ 1 > isto. A YjY NEW<br>11.5401 P= FFI. im (7.9)<br>LJ= LlaInggala/ | ] —_j l 2a) Zz jini oe ieesi 7 =aT<br>oe 4) (fa) fo , — a CTY AW OW WA VA ee Wy | Ges<br>° geH lt | ee| SE FA iq 03 all I | lif Nie |e | al<br>es Saa gpae Fy aul 4.75402 s4se04 ; Hlea | a All|4\\ | {ll| | lai \al| Y {ll | 4|||<br> ———/ nl P| y ATI WIZE Wt a<br>/ | 4 asai2 4.1202 =<br>: 1 / WALZ j Lal Te wees<br>[+—— 1620.45 ——+| ioe ~ Z|Y - = +0.<br>roztec transportnich otvoru 1.5<br>er—--L- 4±0.1 —_- B . | (8)2±0.1 wo— -- (48)1.5 0.1 aale. ( 1.5) _ distance of transport holes4x10=40±0.2mm4x11=44±0.2mm4x12=48±0.2mmB-B 1.5 NEW<br>r o © O ood,0c) 00 0 0 B-B { A-A<br>| ! !<br>' ‘ij2- iino- eeZon 1, 1 4±0.2 Ht ob || A<br>oe<br>' B ||| 16±0.15 | | | j. 1.5 0.1 1.2DWN ' 1.2 [+0.2]  0 [+0.2]  0 i a 30.3.2012 ai i ro ! ns>L 10±0.212±0.2 -~ es ~ 12.2±0.2 -L ~<br>Zdenek Curda<br>3 =)3] ©XZ. Y o 4 3 2+0.1 B B A A<br>= +0,1 | 2+0. °<br>e VEe‘I éo:; p4 Ee f o 2 mx? i 2 fo)<br>f © pee r e d ro) 4) 7) fA<br>(a p ) ]& ey} NS|| eySt | 7 4 H f<br>3 ae N — —— — oN ] Y 4 Y<br>i y [tA ol , HY {<br>H Lhe ebereerrernrey<br>Erb | — i" 10:20.2 #0.<br>|<br>i“xzeeeeEA T T | (fo)<br>ga l &<br>o N<br>B 16<br>' 4±0.1 et B 2±0.1 ~¢ 1.5 0.1 roztec trandistance of4x10=40±04x11=44±04x12=48±0 mmmm q NEW A-A<br>4 O10 0 6 6 6 B-B }|] o = 77<br>te, i fa |<br>Lt -f UW . t 1 H TH I<br>A<br>O- t 4±0.2 \\ | WV / tl<br>Q- hh HE | yy Hy / /<br>; 1 ! i ry H tpeext<br>A f i LOLLY)Sf ] eetESS |<br>1 1.2 [+0.2]  0 T 8±0.2 mea<br>|| 0aL 1.5 0.1 | 9±0.2 9.1±0.2 _<br>B 12±0.15<br>7 A A<br>P a Ker B B - B<br>S | No_440,1|2+0.1 4°<br>a % q max. ©<br>Yl 2 4 Tape and reel for SMT 4<br>ese ce : la d =<br>——} iw ——| © p e e —) 1 zs — |<br>xs - }—FZZZZ (a } KY fyza——<br>] |q Woo ath, al | : | i |<br>x al J o|. fF o Y H ¥ H 1<br>| ¥i q + 4 4 Y Y<br>bj ee | Od j—4_- 3 Y HY j<br>Low Lit / ee oe ee ee<br>e e n> !<br>12 exeWNyw2—'Nco) 9 8+0.2<br>max. 3°<br>max. R0.<br>max. R0.3<br>max. 3°<br>max. R0.3<br>max. 3°<br>max. 3°<br>max. 3°<br>max. 3°<br>max. R0.3<br>max. R0.3<br>max. 3°<br>max. 3°<br>max. 3°<br>1.75±0.1<br>(3.6) 1.9±0.2 0.6<br>24±0.3 11.5±0.1 2.2±0.22.2±0.2 4.4±0.2 +0.310.4 0<br>15.4±0.2 15.4±0.2<br>1.3±0.2<br>1.3±0.2<br>1.9±0.2<br>(3.6)<br>0.4<br>10.4<br>1.75±0.1 0.6<br>(3.6) 1.9±0.2 4.5±0.2<br>11.5±0.1 2.2±0.2 +0.3  0<br>10.9<br>24±0.3<br>15.4±0.2<br>.3±0.21<br>(3.6) 1.9±0.2<br>0.4<br>10.4<br>15.5<br>**----- End of picture text -----**<br>


01-2017, Rev.0117 www.te.com 

© 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

5 

Signal Relays 

**AXICOM** 

## **P2 Relay V23079** (Continued) 

|**Product code structure**|**Product code structure**|||Typical product code|Typical product code|**V23079**|**A**|**1**|**001**|**B**|**301**|
|---|---|---|---|---|---|---|---|---|---|---|---|
|**Type**||||||||||||
|**V23079**Signal Relay P2 Series||||||||||||
|**Version**||||||||||||
|**A**|THT, monostable|**D**|SMT, monostable, long term.|**G**|SMT, monostable, short term.||SMT, monostable, short term.|||||
|**B**|THT, latching, 2 coils|**E**|SMT, latching, 2 coils long term.|SMT, latching, 2 coils long term.<br>**H**|SMT, latching, 2 coils short term.|||||||
|**C**|THT, latching, 1 coil|**F**|SMT, latching, 1 coil long term.|**J**|SMT, latching, 1 coil short term.|||||||
|**Coil design**||||||||||||
|**1**|Standard coil (not for high dielectric version)|||||||||||
|**2**|Overmolded coil|||||||||||
|**Coil**||||||||||||
|Coil code: please refer to coil versions table|Coil code: please refer to coil versions table||Coil code: please refer to coil versions table|||||||||
|**Version**||||||||||||
|**B**|Standard version|||||||||||
|**X**|High dielectric version|||||||||||
|**Contacts**for standard versions||||||||||||
|**301**|**301**<br>2 form C contacts (2 CO), AgNi +Au|||||||||||
|**201**|**201**<br>2 form C contacts (2 CO), AgPd +Au; on request only|||||||||||



|V23079-A1006-B301<br>V23079-A1005-B301<br>V23079-A2008-B301<br>V23079-A2011-B301<br>V23079-A2001-B301<br>V23079-A2002-B301<br>V23079-A2006-B301<br>V23079-A2003-B301<br>V23079-B1218-B301<br>V23079-B1208-B301<br>V23079-B1211-B301<br>V23079-B1201-B301<br>V23079-B1202-B301<br>V23079-B1206-B301<br>V23079-B1203-B301<br>V23079-B1205-B301<br>V23079-B2219-B301<br>V23079-B2218-B301<br>V23079-B2208-B301<br>V23079-B2201-B301<br>V23079-C1108-B301<br>V23079-C1111-B301<br>V23079-C1101-B301<br>V23079-C1102-B301<br>V23079-C1106-B301<br>V23079-C1103-B301<br>V23079-C1105-B301||**Coil design**|**Coil type**|**Coil voltage**<br>9VDC|2-1393788-0<br>1-1393788-6<br>6-1419120-6<br>3-1393789-9<br>3-1393789-5<br>3-1393789-6<br>3-1393789-8<br>3-1393789-7<br>1422002-8<br>4-1393788-1<br>4-1393788-2<br>3-1393788-3<br>3-1393788-5<br>3-1393788-9<br>3-1393788-6<br>3-1393788-7<br>1-1422002-2<br>1-1422002-1<br>1-1422002-0<br>1422002-9<br>5-1393788-3<br>5-1393788-4<br>4-1393788-5<br>4-1393788-7<br>5-1393788-1<br>4-1393788-8<br>5-1393788-0|
|---|---|---|---|---|---|
|||||24VDC||
|||Overmolded||3VDC||
|||||4.5VDC||
|||||5VDC||
|||||6VDC||
|||||9VDC||
|||||12VDC||
|||Standard|Bistable, 2 coils|2.4VDC||
|||||3VDC||
|||||4.5VDC||
|||||5VDC||
|||||6VDC||
|||||9VDC||
|||||12VDC||
|||||24VDC||
|||Overmolded||2VDC||
|||||2.4VDC||
|||||3VDC||
|||||5VDC||
|||Standard|Bistable, 1 coils|3VDC||
|||||4.5VDC||
|||||5VDC||
|||||6VDC||
|||||9VDC||
|||||12VDC||
|||||24VDC||



6 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

01-2017, Rev. 0117 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

Signal Relays 

**AXICOM** 

## **P2 Relay V23079** (Continued) 

|V23079-D1006-B301<br>V23079-D1005-B301<br>V23079-D2008-B301<br>V23079-D2011-B301<br>V23079-D2001-B301<br>V23079-D2002-B301<br>V23079-D2006-B301<br>V23079-D2003-B301<br>V23079-E1219-B301<br>V23079-E1218-B301<br>V23079-E1208-B301<br>V23079-E1211-B301<br>V23079-E1201-B301<br>V23079-E1202-B301<br>V23079-E1206-B301<br>V23079-E1203-B301<br>V23079-E1205-B301<br>V23079-E2219-B301<br>V23079-E2201-B301<br>V23079-E2208-B301<br>V23079-E2218-B301<br>V23079-F1108-B301<br>V23079-F1111-B301<br>V23079-F1101-B301<br>V23079-F1102-B301<br>V23079-F1106-B301<br>V23079-F1103-B301<br>V23079-F1105-B301<br>V23079-G1005-B301<br>V23079-G2008-B301<br>V23079-G2016-B301<br>V23079-G2011-B301<br>V23079-G2001-B301<br>V23079-G2002-B301<br>V23079-G2006-B301<br>V23079-G2003-B301<br>V23079-H1208-B301<br>V23079-H1211-B301<br>V23079-H1201-B301<br>V23079-H1202-B301<br>V23079-H1206-B301<br>V23079-H1203-B301<br>V23079-H1205-B301<br>V23079-J1108-B301<br>V23079-J1111-B301<br>V23079-J1101-B301<br>V23079-J1102-B301<br>V23079-J1103-B301<br>V23079-J1105-B301<br>V23079-G2008-X079<br>V23079-G2001-X071<br>V23079-G2002-X072<br>V23079-G2006-X073<br>V23079-G2003-X074<br>V23079-A2003-X074<br>V23079-A2008-X079||**Coil design**|**Coil type**<br>~~J~~<br>~~Jo~~<br>~~Po~~<br>~~jp~~<br>~~Jd~~<br>~~Po~~<br>~~po~~<br>~~Po~~|**Coil voltage**<br>9VDC<br>~~J~~|5-1393788-9<br>5-1393788-8<br>4-1393789-7<br>4-1393789-8<br>4-1393789-3<br>4-1393789-4<br>4-1393789-6<br>4-1393789-5<br>1-1422007-0<br>1422007-5<br>7-1393788-1<br>7-1393788-2<br>6-1393788-8<br>1393789-5<br>1393789-9<br>6-1393788-9<br>7-1393788-0<br>1422007-6<br>1422007-7<br>1422007-8<br>1422007-9<br>7-1393788-5<br>1-1393789-4<br>7-1393788-3<br>1-1393789-0<br>1-1393789-2<br>7-1393788-4<br>1-1393789-1<br>7-1393788-8<br>5-1393789-4<br>1393790-5<br>5-1393789-5<br>4-1393789-9<br>5-1393789-0<br>5-1393789-3<br>5-1393789-1<br>2-1393789-4<br>8-1393788-4<br>2-1393789-0<br>2-1393789-1<br>2-1393789-3<br>8-1393788-3<br>2-1393789-2<br>2-1393789-9<br>3-1393789-0<br>2-1393789-5<br>2-1393789-6<br>2-1393789-7<br>2-1393789-8<br>1422006-5<br>1422006-1<br>1422006-2<br>1422006-3<br>1422006-4<br>1422025-7<br>1-1422025-1|
|---|---|---|---|---|---|
|||||24VDC<br>~~J~~<br>~~Jo~~||
|||Overmolded||3VDC<br>~~Jo~~<br>~~Po~~||
|||||4.5VDC<br>~~Po~~<br>~~jp~~||
|||||5VDC<br>~~jp~~<br>~~Jd~~||
|||||6VDC<br>~~Jd~~<br>~~Po~~||
|||||9VDC<br>~~Po~~<br>~~po~~||
|||||12VDC<br>~~po~~<br>~~Po~~||
|||Standard|Bistable, 2 coils<br>~~Po~~<br>~~Po~~<br>~~po~~<br>~~Jo~~<br>~~po~~<br>~~|Sd~~<br>~~Jo~~<br>~~po~~<br>~~po~~<br>~~Jo~~<br>~~po~~<br>~~|Cd~~<br>~~Jo~~<br>~~po~~|2VDC<br>~~Po~~<br>~~Po~~||
|||||2.4VDC<br>~~Po~~<br>~~po~~||
|||||3VDC<br>~~po~~<br>~~Jo~~||
|||||4.5VDC<br>~~Jo~~<br>~~po~~<br>~~|~~||
|||||5VDC<br>~~po~~<br>~~|Sd~~||
|||||6VDC<br>~~|Sd~~<br>~~Jo~~||
|||||9VDC<br>~~Jo~~<br>~~po~~||
|||||12VDC<br>~~po~~<br>~~po~~||
|||||24VDC<br>~~po~~<br>~~Jo~~||
|||Overmolded||2VDC<br>~~Jo~~<br>~~po~~<br>~~|~~||
|||||5VDC<br>~~po~~<br>~~|Cd~~||
|||||3VDC<br>~~|Cd~~<br>~~Jo~~||
|||||2.4VDC<br>~~Jo~~<br>~~po~~||
|||Standard|Bistable, 1 coil<br>~~po~~<br>~~fo~~<br>~~po~~<br>~~Jo~~<br>~~po~~<br>~~jpJo~~<br>~~Po~~|3VDC<br>~~po~~<br>~~fo~~||
|||||4.5VDC<br>~~fo~~<br>~~po~~||
|||||5VDC<br>~~po~~<br>~~Jo~~||
|||||6VDC<br>~~Jo~~<br>~~po~~<br>~~jp~~||
|||||9VDC<br>~~po~~<br>~~jp~~||
|||||12VDC<br>~~jpJo~~||
|||||24VDC<br>~~Jo~~<br>~~Po~~||
||SMT, short pins||Monostable<br>~~po~~<br>~~Jo~~<br>~~po~~<br>~~jpJo~~<br>~~Po~~<br>~~po~~<br>~~po~~|24VDC<br>~~po~~||
|||Overmolded||3VDC<br>~~po~~<br>~~Jo~~||
|||||4VDC<br>~~Jo~~<br>~~po~~<br>~~jp~~||
|||||4.5VDC<br>~~jp~~||
|||||5VDC<br>~~jpJo~~||
|||||6VDC<br>~~Jo~~<br>~~Po~~||
|||||9VDC<br>~~po~~||
|||||12VDC<br>~~po~~<br>~~po~~||
|||Standard|Bistable, 2 coils<br>~~po~~<br>~~Po~~<br>~~jpJo~~<br>~~Po~~<br>~~po~~<br>~~Jo~~<br>~~Po~~|3VDC<br>~~po~~<br>~~Po~~<br>~~jp~~||
|||||4.5VDC<br>~~jp~~||
|||||5VDC<br>~~jpJo~~||
|||||6VDC<br>~~Jo~~<br>~~Po~~||
|||||9VDC<br>~~po~~||
|||||12VDC<br>~~po~~<br>~~Jo~~||
|||||24VDC<br>~~Jo~~<br>~~Po~~||
||||Bistable, 1 coil<br>~~|~~<br>~~Jo~~<br>~~Po~~<br>~~po~~<br>~~Jo~~<br>~~Po~~|3VDC<br>~~|~~||
|||||4.5VDC<br>~~|~~<br>~~Jo~~||
|||||5VDC<br>~~Jo~~<br>~~Po~~||
|||||6VDC<br>~~po~~||
|||||12VDC<br>~~po~~<br>~~Jo~~||
|||||24VDC<br>~~Jo~~<br>~~Po~~||
|||High dielectric<br>Overmolded|Monostable<br>~~|~~<br>~~Jo~~<br>~~Po~~<br>~~po~~<br>~~Jo~~<br>~~po~~<br>~~po~~|3VDC<br>~~|~~||
|||||5VDC<br>~~|~~<br>~~Jo~~||
|||||6VDC<br>~~Jo~~<br>~~Po~~||
|||||9VDC<br>~~po~~||
|||||12VDC<br>~~po~~<br>~~Jo~~||
|||||12VDC<br>~~Jo~~<br>~~po~~||
|||||3VDC<br>~~po~~||



7 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

01-2017, Rev.0117 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions