3RHP6040E

## **Crydom** 

_See full Datasheet below..._ 

## **BUY NOW** 

## **BUY NOW** 

masterelectronics.com & onlinecomponents.com are **authorized** e-commerce distributors of electronic components. 

## **3RHP Series AC Control** 

- 100K-cycle UL508 Endurance Rating for Enhanced Reliability 

- 40 and 50A output 

it 12 &F ——_— i } = , • Voltage ratings to 600 VAC • Lifetime 2 million operations at full load ne, • LED input status indicator m ad vias • Wire, lug or quick connect termination • Industry Standard DP contactor mounting ute ed **PRODUCT SELECTION (by control voltage and output rating) Control Voltage 40A 280 VAC 50A 280 VAC 40A 600 VAC 50A 600 VAC** 20-26 VAC 3RHP2840E 3RHP2850E 3RHP6040E 3RHP6050E 100-130 VAC 3RHP2840F 3RHP2850F 3RHP6040F 3RHP6050F 208-240 VAC 3RHP2840G 3RHP2850G 3RHP6040G 3RHP6050G **OUTPUT SPECIFICATIONS (voltage) Description 280 VAC 600 VAC** Operating Voltage (47-63Hz) [Vrms] 24-280 48-600 Maximum Off-State Leakage Current per channel 0.05 mA @ 240 VAC 0.06 mA @ 480 VAC **OUTPUT SPECIFICATIONS (current) Description 40A 50A** Maximum Load Current per phase @ 40°C [Arms] (1) 40A Resistive 50A Resistive Power terminals 1/4" Quick Connect and 10x32 binder 1/4" Quick Connect and box lugs head screws Wire Size 8-14 AWG 6-14 AWG **INPUT SPECIFICATIONS Description SUFIX E SUFIX F SUFIX G** Coil Voltage [50/60 Hz] 20-26 VAC 100-130 VAC 208-240 VAC Min. Turn-On Voltage 20 VAC 100 VAC 208 VAC Min. Turn-Off Voltage 12 VAC 24 VAC 48 VAC Coil Power Consumption, inrush. 56 VA @ 24 VAC 56 VA @ 120 VAC 56 VA @ 220 VAC Coil Power Consumption, sealed. 6.6 VA @ 24 VAC 6.6 VA @ 120 VAC 6.6 VA @ 220 VAC **GENERAL SPECIFICATIONS Description Parameters** Dielectric Strength, Input to Output 4000 Vrms Dielectric Strength, Input/Output to ground 2500 Vrms Contacts (2) Three Normally Open Ambient Operating Temperature Range (3) -20 to 65 °C Ambient Storage Temperature Range -40 to 100 °C Max. Turn-On Time 50/60 Hz 20 ms / 16.6 ms Max. Turn-Off Time 50/60Hz 40 ms / 32 ms Maximum Number of Operations 30 per Minute Lifetime Number of Operations @ Rated Current (4) > 2 Million Weight (typical) 1.19 lbs (540 g) Screw Torque (input/Output) 40A 4.4-5 in lb (0.5-0.6 Nm) / 15-18 in lb (1.7-2.1 Nm) Screw Torque (input/Output) 50A 4.4-5 in lb (0.5-0.6 Nm) / 20-25 in lb (2.2-2.9 Nm) **GENERAL NOTES** 

- (1) See Derating curves for additional operating conditions. 

(2) The RHP includes a Solid State Relay, therefore electrical isolation is not provided. 

(3) The RHP includes over temperature protection for the solid state relay. (4) 40°C ambient temperature, 30 operations/min, maximum voltage control. 

**==> picture [524 x 559] intentionally omitted <==**

**----- Start of picture text -----**<br>
MECHANICAL SPECIFICATIONS<br>(Tolerances:+ 0.02 in / 0.5 mm)<br>—— 3585in(91.06mm] ——<br>Input status LED —| |— 0.210in [5.33mm]}<br>indicator ~ Input ‘Control<br>= =a Te F] a<br>elie: . - ile — tu U0<br>=| Ong QPS RBE a \, 2.505in (63.68mm] iS<br>AC Load Ec| -| |3;anGrai) 2) q G~]. 2.:000in{50.80mm]<br>Terminals NG:| Rae | <2)e) AC Line U ait<br>Se '==24 Terminals 4,<br>| 2.290in [58.17mm] 3,250in (82.55mm]<br>Connector applicable ___<br>only to DC control i. a Clamp block terminals pS 1<br>versions | for 50 Amp output {|__<br>CI h | verse oi Too<br>MW(o_| oo , io= ; Il‘millmr) l my)imilimel | [almy) 4.219in (107.16mm]<br>| | : (AC4.172in Input{105.98(105.98mm my) (DC Input version,  only)<br>[54.53mm]<br>2.147in B 2.606in 86.19mm] | |<br>iz|_U 3.835in [97.41mm] _|LH| st®=$[]|AC [Ji}]  Line/Load Terminalsof<br>#10-24 screws or .25in x .032in Dual Fast-On<br>(Box lugs available on 50 Amps version only)<br>g Input/Control Terminals<br>#8-32 screws or .25in x .032in Fast-On<br>THERMAL DERATE INFORMATION<br>SRHPXX40XX 3RHPXXSOXX<br>45 a<br>br bt]<br>FS 40 ww<br>2 E<br>ae g 8<br><= 35 - | Power lead size & Power lead size<br>= —+— AWG HE i | ——AWG#E<br>5 —E-AWG #5 Fa —E-AWG#8<br>oO 32- 5 8<br>3 o<br>Ss Safe Operating Area 3<br>pa s a1 4<br>25 - Sale Operating Arez<br>al +<br>20. : : . 2<br>25 35 45 55 65 75 25 35 ae 55 65 5<br>Ambient Temperature, °C Ambient Tomperaturs, °C<br>Obsolete<br>**----- End of picture text -----**<br>


**TYPICAL ELECTRICAL CONNECTIONS** Typical Electrical Connection for 3 Phase Applications® Optional Electrical Connections for Single Phase Applications (For output voltage options 24, 28, 60) (For output voltage options 12, 24, 28, 60) 3 Phase AC AC InpuiConto Voltage ‘ehawewwune Operating Voltage ES ENERO) IL3 5L3 ; 613. 5L3=NC “ 6T3=NC 3L2 ©© i.2© +I9«Is 472 Leed30 Single120/240 Phase VAC in go 1S B82a: ale| oR )ILt = = Neutra oo (D5,DC D12,InputiContro! 024 input versions)Voltage ‘al (D5,DC 012,InputfContro!pu 024 input versions)Vottage , DO NOT apply any AC voltage to DC contactor coil connections DO NOT apply any AC voltage to DC contactor coil1 connections" IL1 = Rated current Optional Electrical Connections for Single Phase Applications© Optional Electrical Connections for Single Phase Applications® (For output voltage options 12, 24, 28, 60) (For output voltage options 12, 24, 28, 60) AC InputiContro! Voltage AC Input/Contro! Voltage (E, F, G input versions) Line 513 {E,F, G input, versions) 13 Line 5L3 is a113 120/240 VAC la | fy S Be His Single Phase 3L2 Se ‘4 R2 120/240 VAC eo o* ‘|s RQ Operating Voltage Ss" ‘fs Single Phase F NC * Operating Voltage i DO NOT apply any AC voltage to DC contactor(D5,DC coil012, D24InputfControl connectionsinput versions)Voltage Neutral sediianie betai sel VotageVoremRs) IL1 = (IL2 + IL3) s Rated current DO NOT apply any AC voltage to DC contactor coil connections —_ 2 < Rated current ©©© InMatchTheapplications singeVL phaseto voltageswitching supplysuffixes voltagetwo single28 must& phase60 befor optionswiredloadsto(R1 termina 1L1E, andF & GR2)and where and 12 312& the24 for for combined properoptions singeloadDX. current phase exceeds operation. IL2 + IL3IL3 $ > Rated Rated current current the contactor's rating (40 or 50 Amps) the retum/neutral lead must not be wired through the contactor (see above drawing). Caution: Risk of overheating. Do not allow any single phase connection to exceed the current rating of the relay. Failureto follow these instructions may result in equipment damage. **AGENCY APPROVALS** UL/cUL UL508, E116950 Rev.063011 EN60950-1-2006 

**ACCESSORIES** Accessories - | = i i a , eee ge all $3 i a eget F . el 7. im ee DIN rail bracket Auxiliary contact ee,| ne 3 | | : Part Number DMB3 HACt = Bb eaewes i |e Description DIN Rail mounting adaptor kit Includes one normally open & one Mounted auxiliary contact normally closed contact, each rated @ 5 Amps rms, 600 VAC, Note: 3RHP accommodates one or two 50/60 Hz 2.5 in Quick Connect HAC1 auxiliary contacts Mounted DIN rail bracket 

**==> picture [514 x 499] intentionally omitted <==**

**----- Start of picture text -----**<br>
EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELL'ESPLOSI EXPLOSAO<br>OR ARC FLASH. x Descanectar » Eteindre EXPLOSION. ONE. * Desconectar<br>« Disconnect all todas los toutes les « Stellen Sie « Spenga tutta 0 equipamento<br>power before suministros de sources jeglichen l'alimentazion de toda a<br>installing or energia a este d'énergie de Strom ab, der e che fornisce energia antes<br>working with equipo antes cet appareil dieses Gerat questa de instalar ou<br>this equipment. de trabajar avant de versorgt, bevor apparecchiatu trabalhar com<br>* ; con este equipo. travailler Sie an dem ra prima del este equipamen<br>Verify 2 Gaseses dessus de cet Gerat Arbeiten lavorare a questa to<br>connections « Verificar todas ; durchfiihren i<br>and replace all las conexiones apparel I * Vor der APPATECCHIAK Ta e Verificar todas<br>covers before y colocar todas « Vérifier tous Inbetriebnahinie e Verificare tutti as conexées e<br>turning on las tapas antes connections, et alle Anschllisse i collegamenti recolocar todas<br>power. de energizer remettre tous diberpriifen und e sostituire as tampas ;<br>. el equipo. couverts en alle Gehauseteile tutte le coperture antes de religar<br>Failure to follow olace avant de montieren: prima della 0 equipamento<br>these di El inettre sous. rotazione<br>instructions incumplimiento sull'alimentazi one /<br>result in death da seine De non-suivi de Gu ues<br>or serious injury. Instrucciones: ces instructions Unterlassung L'omissione di Gy : ns ce ee<br>puede provocar provoquera la dieser seguire queste po ic S noite<br>la muérta o mort ou des Anweisungen istruz joni OU lesGes Series:<br>lesiones serias. lésions sérieuses kénnen zum provochera la<br>sérieuses. Tode oder zu morte o di<br>schweren lesioni serie<br>Verletzungen<br>filhren.<br>A WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA/ AVISO<br>RISK OF MATERIAL DAMAGE AND HOT RISQUE DE DOMMAGE MATERIEL ET DE GEFAHR VON MATERIALSCHADEN UND<br>ENCLOSURE SURCHAUFFE DU BOITIER GEHAUSEERHITZUNG<br>+ The product's side panels may be hot, allow *Les panneaux latéraux du produit peuvent étre * Die Seitenwande kénnen hei sein. Lassen Sie<br>the product to cool before touching. chauds. Laisser le produit refroidir avant de le das Produkt abkihlen, bevor Sie es berihren.<br>+ Follow proper mounting instructions including | toucher. ; * Beachten Sie die Montageanweisungen,<br>torque values. * Respecter les consignes de montage, et « Fihren Sie keine Flissigkeiten oder<br>* Do not allow liquids or foreign objects to enter notamment les couples de serrage. Fremdk6rper in das Produkt ein.<br>this: product. * Nei pas laissera hel péneétrerAcs de liquides ni de corps<br>étrangers a l'intérieur du produit.<br>: ; ; ._ | Le non-respect de cette directive peut entrainer, Die Nichtbeachtung dieser Anweisung kann<br>Failure to follow these int gerei can result in| ges |ésions corporelles graves ou des Kérperverletzung oder Materialschéden<br>serious injury, or equipment damage. dommages matériels. zur Folge haben.<br>RIESGO DE DANOS MATERIALES Y DE : RISCO DE DANO MATERIAL E DE AQUECIMENTO<br>SOBRECALENTAMIENTO DE LA UNIDAD Spal DI DANNI MATERIALI E D'INVOLUCRO<br>* Os paineéis laterais do produto podem estar<br>* Los paneles laterales de! producto pueden *| pannelli laterali dell'apparecchio possono quentes; dé tempo ao produto para arrefecer<br>over calentes. Esperar que el producto se scottare; lasciar quindi raffreddare il prodotto antes de lhe tocar.<br>enfrie antes de tpcarlo. ; prima di toccarlo, * Siga devidamente as instrugdes de montagem.<br>7 Soliant “ie Instrucclones de montaje, yen * Seguire le istruzioni di montaggio corrette. * Nao permita a entrada de liquidos e de objectos<br>* particu ar los pares de aprelado. * Non far entrare liquidi o oggetti estranei in questo estranhos no produto.<br> No dejar que penetren liquidos 0 cuerpos apparecchio<br>Obsolete extrafos en el producto. :<br>**----- End of picture text -----**<br>


**ANNEX - ENVIROMENTAL INFORMATION** The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard $J/T11364 — 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Lead | Mercury |Cadmium | Hexavalent | Polybrominated | Polybrominated Name (Pb) | (Hg) (Cd) Chromium biphenyls diphenyl ethers (Cr (VI)) (PBB) (PBDE) Semiconductor die x | Soder | xX | O | oO | OF | oO | Oo | J AE aT as BY Ea HP aS 2 i HH Oe Fi PED FFSEAfa APPATdns MLEESHMEil SJ/T11364bp ABER - 2006, " Awa RTH BRK Pb Ha Cd Cr (VI PBB PBDE |worwee [x| x [ole| o |o [fl ooe **[** | eso [eo| oOo |