3627453226122K

## **MINIATURE SMD POWER INDUCTOR** 

## TYPE 3627 SERIES 

## **INTRODUCTION** 

TE Connectivity (TE)’s miniature SMD power inductors are designed with special ferrite cores for increased performance and reliability. They are offered in two variations viz. 3627 for low DC Resistance and 3627*C for low DC resistance & high current capability with high impedance characteristics, which make them a good choice for using as a choke coil in DC power supply circuits. 

## FEATURES 

- Special ferrite core 

- Low DC resistance 

- High current capacity 

- High impedance characteristics 

## APPLICATIONS 

- High frequency communication products 

- Personal computers 

- Disc drives and computer peripherals 

- DC power supply circuits 

## **INDUCTANCE AND RATED CURRENT RANGES** 

|**Type**|**Inductance**<br>**Range (µH)**|**Current Range (A)**|
|---|---|---|
|3627 322515|1.00 ~ 100|1.00 ~ 0.1|
|3627 322520|1.00 ~ 560|0.445 ~ 0.04|
|3627 453226|1.00 ~ 2200|0.5 ~ 0.03|
|3627 322515C|0.47 ~ 120|3.4 ~ 0.17|
|3627 322520C|1.00 ~ 560|1.00 ~0.06|
|3627 453226C|1.00 ~ 1000|1.08 ~ 0.05|
|3627 575047C|0.12 ~ 10000|6.00 ~ 0.05|



## **CHARACTERISTICS FOR 3627 322515C** 

The current when the inductance Rated DC Current becomes 30% typical of its initial value (I sat) (Ta=25°C) Temperature Rise The actual current when the temperature Current (I rms) of coil becomes ∆ T40°C. (Ta=25°C) Operating -40~125°C temperature range 

## **CHARACTERISTICS FOR OTHER MODELS** 

The current when the inductance becomes 10% lower than its initial value Rated DC Current or the current when the temperature of coil increases ∆ T20°C. The smaller one is defined as Rated DC Current (Ta=25°C). Operating -40~125°C temperature range 

Electrical specifications at 25°C 

**MINIATURE SMD POWER INDUCTOR** 

Type 3627 Series 

## **ELECTRICAL CHARACTERISTICS: 3627 322515** 

**==> picture [526 x 18] intentionally omitted <==**

**----- Start of picture text -----**<br>
Code L (µH) Tolerance Test Condition DCR ( Ω ) Max. IDC (A) Max SRF (MHz) Min.<br>**----- End of picture text -----**<br>


|**Code**|**L (µH)**|**Tolerance**|**Test Condition**|**DCR (**Ω**) Max.**|**IDC (A) Max**|**SRF (MHz) Min.**|
|---|---|---|---|---|---|---|
||||||||
|1R0|1.0|N|1MHz, 0.1V|0.078|1.000|100|
|1R5|1.5|N|1MHz, 0.1V|0.068|1.200|100|
|2R2|2.2|M|1MHz, 0.1V|0.126|0.790|64|
|3R3|3.3|M|1MHz, 0.1V|0.180|0.700|50|
|4R7|4.7|M|1MHz, 0.1V|0.195|0.650|43|
|100|10|K|1MHz, 0.1V|0.420|0.450|26|
|150|15|K|1MHz, 0.1V|0.750|0.300|22|
|220|22|K|1MHz, 0.1V|1.000|0.250|19|
|330|33|K|1MHz, 0.1V|1.400|0.200|17|
|470|47|K|1MHz, 0.1V|2.200|0.170|13|
|680|68|K|1MHz, 0.1V|3.200|0.130|9|
|101|100|K|1MHz, 0.1V|4.500|0.100|8|



## **ELECTRICAL CHARACTERISTICS: 3627 322520** 

|**Code**|**L (µH)**|**Tolerance**|**Test Condition**|**DCR (**Ω**) Max.**|**IDC (A) Max**|
|---|---|---|---|---|---|
|1R0|1.0|M|1MHz, 0.1V|0.50|0.445|
|1R2|1.2|M|1MHz, 0.1V|0.60|0.425|
|1R5|1.5|K|1MHz, 0.1V|0.60|0.400|
|1R8|1.8|K|1MHz, 0.1V|0.70|0.390|
|2R2|2.2|K|1MHz, 0.1V|0.80|0.370|
|2R7|2.7|K|1MHz, 0.1V|0.90|0.320|
|3R3|3.3|K|1MHz, 0.1V|1.00|0.300|
|3R9|3.9|K|1MHz, 0.1V|1.10|0.290|
|4R7|4.7|K|1MHz, 0.1V|1.20|0.270|
|5R6|5.6|K|1MHz, 0.1V|1.30|0.250|
|6R8|6.8|K|1MHz, 0.1V|1.50|0.240|
|8R2|8.2|K|1MHz, 0.1V|1.60|0.225|
|100|10|J|1MHz, 0.1V|1.80|0.190|
|120|12|J|1MHz, 0.1V|2.00|0.180|
|150|15|J|1MHz, 0.1V|2.20|0.170|
|180|18|J|1MHz, 0.1V|2.50|0.165|
|220|22|J|1MHz, 0.1V|2.80|0.150|
|270|27|J|1MHz, 0.1V|3.10|0.125|
|330|33|J|1MHz, 0.1V|3.50|0.115|
|390|39|J|1MHz, 0.1V|3.90|0.110|
|470|47|J|1MHz, 0.1V|4.30|0.100|
|560|56|J|1MHz, 0.1V|4.90|0.085|
|680|68|J|1MHz, 0.1V|5.50|0.080|
|820|82|J|1MHz, 0.1V|6.20|0.070|



INDUSTRIAL / SMD POWER INDUCTOR 

2 

**MINIATURE SMD POWER INDUCTOR** 

Type 3627 Series 

## **ELECTRICAL CHARACTERISTICS: 3627 322520** 

**==> picture [526 x 19] intentionally omitted <==**

**----- Start of picture text -----**<br>
Code L (µH) Tolerance Test Condition DCR ( Ω ) Max. IDC (A) Max<br>**----- End of picture text -----**<br>


|**Code**|**L (µH)**|**Tolerance**|**Test Condition**|**DCR (**Ω**) Max.**|**IDC (A) Max**|
|---|---|---|---|---|---|
|||||||
|101|100|J|1MHz, 0.1V|7.00|0.080|
|121|120|J|1MHz, 0.1V|8.00|0.075|
|151|150|J|1MHz, 0.1V|9.30|0.070|
|181|180|J|1MHz, 0.1V|10.20|0.065|
|221|220|J|1MHz, 0.1V|11.80|0.065|
|271|270|J|1MHz, 0.1V|12.50|0.065|
|331|330|J|1MHz, 0.1V|15.00|0.065|
|391|390|J|1MHz, 0.1V|22.00|0.050|
|471|470|J|1KHz, 0.1V|25.00|0.045|
|561|560|J|1KHz, 0.1V|28.00|0.040|



## **ELECTRICAL CHARACTERISTICS: 3627 453226** 

|**Code**|**L (µH)**|**Tolerance**|**Test Condition**|**DCR (**Ω**) Max.**|**IDC (A) Max**|
|---|---|---|---|---|---|
|1R0|1.0|M|1MHz, 0.1V|0.20|0.500|
|1R2|1.2|M|1MHz, 0.1V|0.20|0.500|
|1R5|1.5|M|1MHz, 0.1V|0.30|0.500|
|1R8|1.8|M|1MHz, 0.1V|0.30|0.500|
|2R2|2.2|M|1MHz, 0.1V|0.30|0.500|
|2R7|2.7|M|1MHz, 0.1V|0.32|0.500|
|3R3|3.3|M|1MHz, 0.1V|0.35|0.500|
|3R9|3.9|M|1MHz, 0.1V|0.38|0.500|
|4R7|4.7|K|1MHz, 0.1V|0.40|0.500|
|5R6|5.6|K|1MHz, 0.1V|0.47|0.500|
|5R6-1|5.6|M|1MHz, 0.25V|0.18|1.180|
|6R8|6.8|K|1MHz, 0.1V|0.50|0.450|
|8R2|8.2|K|1MHz, 0.1V|0.56|0.450|
|100|10|J|1MHz, 0.1V|0.56|0.400|
|120|12|J|1MHz, 0.1V|0.62|0.380|
|150|15|J|1MHz, 0.1V|0.73|0.360|
|180|18|J|1MHz, 0.1V|0.82|0.340|
|220|22|J|1MHz, 0.1V|0.94|0.320|
|270|27|J|1MHz, 0.1V|1.10|0.300|
|330|33|J|1MHz, 0.1V|1.20|0.270|
|390|39|J|1MHz, 0.1V|1.40|0.240|
|470|47|J|1MHz, 0.1V|1.50|0.220|
|560|56|J|1MHz, 0.1V|1.70|0.200|
|680|68|J|1MHz, 0.1V|1.90|0.180|
|820|82|J|1MHz, 0.1V|2.20|0.170|
|101|100|J|1MHz, 0.1V|2.50|0.160|



INDUSTRIAL / SMD POWER INDUCTOR 

3 

**MINIATURE SMD POWER INDUCTOR** 

Type 3627 Series 

## **ELECTRICAL CHARACTERISTICS: 3627 453226** 

**==> picture [526 x 18] intentionally omitted <==**

**----- Start of picture text -----**<br>
Code L (µH) Tolerance Test Condition DCR ( Ω ) Max. IDC (A) Max<br>**----- End of picture text -----**<br>


|**Code**|**L (µH)**|**Tolerance**|**Test Condition**|**DCR (**Ω**) Max.**|**IDC (A) Max**|
|---|---|---|---|---|---|
|||||||
|121|120|J|1MHz, 0.1V|3.00|0.150|
|151|150|J|1MHz, 0.1V|3.70|0.130|
|181|180|J|1MHz, 0.1V|4.50|0.120|
|221|220|J|1MHz, 0.1V|5.40|0.110|
|271|270|J|1MHz, 0.1V|6.80|0.100|
|331|330|J|1MHz, 0.1V|8.20|0.095|
|391|390|J|1MHz, 0.1V|9.70|0.090|
|471|470|J|1KHz, 0.1V|11.80|0.080|
|561|560|J|1KHz, 0.1V|14.50|0.070|
|681|680|J|1KHz, 0.1V|17.00|0.065|
|821|820|J|1KHz, 0.1V|20.50|0.060|
|102|1000|J|1KHz, 0.1V|25.00|0.050|
|122|1200|J|1KHz, 0.1V|30.00|0.045|
|152|1500|J|1KHz, 0.1V|37.00|0.040|
|152-2|1500|K|1KHz, 0.1V|37.00|0.055|
|182|1800|J|1KHz, 0.1V|45.00|0.035|
|222|2200|J|1KHz, 0.1V|50.00|0.030|
|222-1*|2200|K|1KHz, 0.1V|47.00|0.078*|



*Note: For 222-1 IDC is the current at which inductance becomes 30% lower than initial value 

## **ELECTRICAL CHARACTERISTICS: 3627 322515C** 

|**Code**|**L (µH)**|**Tolerance**|**Test Condition**|**DCR (**Ω**) ±20**|**Isat (A) Max.**|**Irms (A) Max.**|**SRF (MHz) Min.**|
|---|---|---|---|---|---|---|---|
|R47|0.47|N|1MHz, 0.1V|0.030|3.40|2.55|100|
|1R0|1.0|N|1MHz, 0.1V|0.045|2.30|2.05|100|
|1R5|1.5|N|1MHz, 0.1V|0.057|1.75|1.75|70|
|2R2|2.2|N|1MHz, 0.1V|0.076|1.55|1.60|70|
|3R3|3.3|N|1MHz, 0.1V|0.120|1.25|1.20|50|
|4R7|4.7|N|1MHz, 0.1V|0.180|1.00|1.00|40|
|6R8|6.8|N|1MHz, 0.1V|0.240|0.85|0.85|40|
|100|10|M|1MHz, 0.1V|0.380|0.75|0.70|30|
|150|15|M|1MHz, 0.1V|0.570|0.60|0.52|20|
|220|22|M|1MHz, 0.1V|0.810|0.50|0.45|20|
|330|33|M|1MHz, 0.1V|1.150|0.38|0.39|13|
|470|47|M|1MHz, 0.1V|1.780|0.33|0.31|11|
|680|68|M|1MHz, 0.1V|2.280|0.28|0.275|11|
|101|100|M|1MHz, 0.1V|2.700|0.18|0.250|8|
|121|120|M|1MHz, 0.1V|4.380|0.17|0.200|8|



INDUSTRIAL / SMD POWER INDUCTOR 

4 

**MINIATURE SMD POWER INDUCTOR** 

Type 3627 Series 

## **ELECTRICAL CHARACTERISTICS: 3627 322520C** 

**==> picture [527 x 19] intentionally omitted <==**

**----- Start of picture text -----**<br>
Code L (µH) Tolerance Test Condition DCR ( Ω ) Max. IDC (A) Max.<br>**----- End of picture text -----**<br>


|**Code**|**L (µH)**|**Tolerance**|**Test Condition**|**DCR (**Ω**) Max.**|**IDC (A) Max.**|
|---|---|---|---|---|---|
|||||||
|1R0|1.0|M|1MHz, 0.1V|0.078|1.000|
|2R2|2.2|M|1MHz, 0.1V|0.126|0.790|
|3R3|3.3|M|1MHz, 0.1V|0.165|0.500|
|4R7|4.7|M|1MHz, 0.1V|0.195|0.450|
|4R7-2|4.7|M|100KHz, 0.25V|0.195|0.650|
|6R8|6.8|M|1MHz, 0.1V|0.330|0.450|
|100|10|M|1MHz, 0.1V|0.572|0.300|
|220|22|K|1MHz, 0.1V|0.923|0.250|
|470|47|K|1MHz, 0.1V|1.690|0.170|
|101|100|J|1MHz, 0.1V|4.550|0.100|
|121|120|K|1MHz, 0.1V|7.000|0.180|
|151|150|J|1MHz, 0.1V|9.100|0.080|
|221|220|J|1MHz, 0.1V|10.92|0.070|
|331|330|J|1MHz, 0.1V|13.00|0.060|
|391|390|J|1MHz, 0.1V|22.10|0.060|
|471|470|J|1MHz, 0.1V|24.70|0.060|
|561|560|J|1MHz, 0.1V|28.60|0.060|



## **ELECTRICAL CHARACTERISTICS: 3627 453226C** 

|**Code**|**L (µH)**|**Tolerance**|**Test Condition**|**DCR (**Ω**) Max.**|**IDC (A) Max.**|
|---|---|---|---|---|---|
|1R0|1.0|M|1MHz, 0.1V|0.08|1.080|
|1R5|1.5|M|1MHz, 0.1V|0.09|1.000|
|2R2|2.2|M|1MHz, 0.1V|0.11|0.900|
|3R3|3.3|M|1MHz, 0.1V|0.13|0.800|
|4R7|4.7|K|1MHz, 0.1V|0.15|0.750|
|6R8|6.8|K|1MHz, 0.1V|0.20|0.720|
|100|10|J|1MHz, 0.1V|0.24|0.650|
|150|15|J|1MHz, 0.1V|0.32|0.570|
|220|22|J|1MHz, 0.1V|0.60|0.420|
|330|33|J|1MHz, 0.1V|1.00|0.310|
|470|47|J|1MHz, 0.1V|1.10|0.280|
|680|68|J|1MHz, 0.1V|1.70|0.220|
|101|100|J|1MHz, 0.1V|2.20|0.190|
|151|150|J|1MHz, 0.1V|3.50|0.130|
|221|220|J|1MHz, 0.1V|4.00|0.110|
|331|330|J|1MHz, 0.1V|6.80|0.100|
|471|470|J|1KHz, 0.1V|8.50|0.090|
|102|1000|K|1KHz, 0.1V|25.00|0.050|



INDUSTRIAL / SMD POWER INDUCTOR 

5 

**MINIATURE SMD POWER INDUCTOR** 

Type 3627 Series 

## **ELECTRICAL CHARACTERISTICS: 3627 575047C** 

**==> picture [527 x 18] intentionally omitted <==**

**----- Start of picture text -----**<br>
Code L (µH) Tolerance Test Condition DCR ( Ω ) Max. IDC (A) Max.<br>**----- End of picture text -----**<br>


|**Code**|**L (µH)**|**Tolerance**|**Test Condition**|**DCR (**Ω**) Max.**|**IDC (A) Max.**|
|---|---|---|---|---|---|
|||||||
|R12|0.12|M|1MHz, 0.1V|0.0098|6.000|
|R27|0.27|M|1MHz, 0.1V|0.0140|5.300|
|R47|0.47|M|1MHz, 0.1V|0.0182|4.800|
|1R0|1.0|M|1MHz, 0.1V|0.0270|4.000|
|1R5|1.5|M|1MHz, 0.1V|0.0310|3.700|
|2R2|2.2|M|1MHz, 0.1V|0.0410|3.200|
|3R3|3.3|M|1MHz, 0.1V|0.0500|2.900|
|4R7|4.7|M|1MHz, 0.1V|0.0574|2.700|
|6R8|6.8|M|1MHz, 0.1V|0.1040|2.000|
|100|10|K|1MHz, 0.1V|0.1300|1.700|
|100-1|10|K|1MHz, 0.25V|0.1300|2.000|
|150|15|K|1MHz, 0.1V|0.210|1.400|
|220|22|K|1MHz, 0.1V|0.266|1.200|
|270|27|K|1MHz, 0.1V|0.300|1.000|
|330|33|K|1MHz, 0.1V|0.448|0.900|
|470|47|K|1MHz, 0.1V|0.560|0.800|
|680|68|K|1MHz, 0.1V|0.938|0.640|
|101|100|K|100KHz, 0.1V|1.204|0.560|
|151|150|K|100KHz, 0.1V|2.660|0.420|
|221|220|K|100KHz, 0.1V|3.360|0.320|
|331|330|K|100KHz, 0.1V|6.160|0.270|
|471|470|K|100KHz, 0.1V|7.560|0.240|
|681|680|K|100KHz, 0.1V|11.34|0.190|
|102|1000|K|10KHz, 0.1V|14.42|0.150|
|222|2200|K|10KHz, 0.1V|30.10|0.100|
|472|4700|K|10KHz, 0.1V|61.04|0.070|
|472-1|4700|M|100KHz, 0.25V|61.00|0.090|
|103|10000|K|10KHz, 0.1V|140.0|0.050|



## **DIMENSIONS** 

|**DIMENSIONS**|**DIMENSIONS**|||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|||||||||||||||||||**H**||
|||||||||||||||||||||
|**C**<br>**Type**<br>**A (mm)**||||||||||||||||||**J**<br>**I**<br>**PAD**||
|||||||||||||||||||**I**<br><br>**LAYOUT**||
|||||||||||||**E**||||**E**||||
|322515(C)|3.2±0.3|||||2.5±0.2|||1.55±0.3||1.05±0.3|||1.05±0.3|||2.0|1.5|1.0|
|322520(C)|3.2±0.3|||||2.5±0.2|||2.0±0.3||0.7min.|||0.7min.|||2.0|1.5|1.0|
|453226(C)|4.5±0.3|||||3.2±0.2|||2.6±0.4||1.0min.|||1.0min.|||3.0|2.0|1.2|
|575047C|5.7±0.3|||||5.0±0.3|||4.7±0.3||1.3min.|||1.7min.|||5.0|2.0|2.0|



INDUSTRIAL / SMD POWER INDUCTOR 

6 

**MINIATURE SMD POWER INDUCTOR** 

Type 3627 Series 

## **ENVIRONMENTAL SPECIFICATIONS General** 

|**Item**<br>~~cn~~<br>~~T—“CSCSCis~~|**Specification**<br>~~T—“CSCSCis~~|
|---|---|
|Shelf storage conditions<br>~~cn~~<br>~~T—“CSCSCis~~|Temperature range: 15 ~ 28°C<br>Humidity: <80% relative humidity<br>Recommended product should be used within one year from the time of delivery.<br>~~T—“CSCSCis~~|



|**Test item**<br>~~CSCC~~|**Specification**<br>~~CSCC~~|**Test conditions / methods**<br>~~CSCC~~|**Test conditions / methods**<br>~~CSCC~~|
|---|---|---|---|
|High temperature<br>Storage test<br>~~CSCC~~|No case deformation or<br>change in appearance.<br>ΔL / L≤10%<br>~~CSCC~~|Temperature: 85±2°C,<br>Time: 48±2 hours<br>Tested after 1 hour at room temperature<br>~~CSCC~~||
|Low temperature Storage test||Temperature -25±2°C,<br>Time: 48±2 hours,<br>Tested after 1hour at room temperature.||
|Humidity test||Temperature: 40±2°C,<br>Relative humidity: 90~95%<br>Time: 96±2 hours<br>Tested after 1hour at room temperature.||
|Thermal shock test||Cycle|30m @ -25°C<br>10m @ 25°C<br>30m @ 85°C|
|||Number of cycles     5<br>Tested after 1 hour at room temperature.||



## **Mechanical** 

|**Test item**<br>~~ee ee~~|**Specification**<br>~~ee~~|**Test conditions / methods**<br>~~ee~~|
|---|---|---|
|Solderability test<br>~~ee ee~~|Terminal area must<br>have 90% minimum<br>solder coverage.<br>~~ee~~|Product with Lead-free terminal: Dip pads in flux then<br>dip in solder pot at 245±5°C for 3 seconds.<br>~~ee~~|
|Resistance to Soldering Heat|No case deformation or<br>change in appearance.|Flux should cover the whole of the sample before heating,<br>then be preheated for about 2 minutes over temperature<br>of 130~150°C. Immersing to 260±5°C for 10 seconds.|
|Vibration test|No case deformation or<br>change in appearance.<br>ΔL / L≤10%|Apply frequency 10~55Hz. 1.5mm amplitude in each<br>of perpendicular direction for 2 hours.|
|Shock resistance||Drop down with 981m/s² (100G) shock attitude upon a rubber block<br>method shock testing machine, for 1 time. In each of three orientations.|



## **REFLOW SOLDER PROFILE** 

**==> picture [205 x 121] intentionally omitted <==**

**----- Start of picture text -----**<br>
Temp °C peak 2650C<br>2600C/10s<br>245<br>220 Heat-up rate  ≈  3K/s Cooling rate<br>≈  6K/s<br>180<br>150<br>Pre-heating<br>Max 20s<br>90s~120s Max 60s<br>Time (Sec)<br>**----- End of picture text -----**<br>


INDUSTRIAL / SMD POWER INDUCTOR 

7 

**MINIATURE SMD POWER INDUCTOR** Type 3627 Series 

## **TAPE AND REEL SPECIFICATIONS** 

|**Type**|**Tape size**|**Tape size**|**Parts per reel**|**Parts per reel**|
|---|---|---|---|---|
||**W (mm)**|**P (mm)**|**7”**|**13”**|
|322515|8|4|2000|-|
|322520|12|8|1000|-|
|453226|12|8|500|-|
|575047|16|12|-|1000|



INDUSTRIAL / SMD POWER INDUCTOR 

8 

## ORDERING INFORMATION 

**Part Number 3627      322515      C       1R0        N** 

## **Common Part** 

**3627** 

## **Size** 

|**Size**||
|---|---|
|**322515**|3.2 x 2.5 x 1.55mm|
|**322520**|3.2 x 2.5 x 2.0mm|
|**453226**|4.5 x 3.2 x 2.6mm|
|**575047**|5.7 x 5.0 x 4.7mm|



## **Rated Power** 

|**C**|Choke use|
|---|---|
|**Blank**|General use|



## **Inductance Value** 

|**1R0**|1.0µH|
|---|---|
|**100**|10µH|
|**331**|330µH|
|**222**|220µH|



## **Resistance Tolerance** 

|**J**|5%|
|---|---|
|**K**|10%|
|**M**|20%|
|**N**|30%|



## **te.com** 

©2023 TE Connectivity. All Rights Reserved. 

TE Connectivity, TE connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. 

While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any changes to the information contained herein without prior notice. TE Connectivity assumes only those obligations set forth in the terms and conditions for this product and shall in no event be liable for any incidental, indirect, or consequential damages arising out of the sale, resale, use, or misapplication of the product. TE expressly disclaims any implied warranties with respect to the information contained herein, including, but not limited to, implied warranties of merchantability or fitness for a particular purpose. Dimensions, specifications and/or information contained herein are for reference purposes only and are subject to change without notice. Consult TE for the latest dimensions, specifications and/or information. Users of TE Connectivity products must make their own assessment as to whether the respective product is suitable for the respective desired application. 

1773151-1 REV:A 09/23     ED 

INDUSTRIAL / SMD POWER INDUCTOR