322170482300

32 Series - Subminiature PCB relays 6 A 

## Features 

**==> picture [53 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
32.21-x000<br>**----- End of picture text -----**<br>


## 32.21-x300 

Printed circuit mount 6 A relay 

- 1 Pole changeover contacts or 

- 1 Pole normally open contact 

- Subminiature, low profile package 

- Sensitive DC coil - 200 mW 

- Wash tight: RT III 

- Cadmium Free contact material option 

- 1 CO (SPDT), 6 A • 1 NO (SPST-NO), 6 A • • Low coil power Low coil power 

- PCB mount • PCB mount 

|||||Copper side view|||Copper side view|
|---|---|---|---|---|---|---|---|
|Contact specification||||||||
|Contact configuration||||1 CO (SPDT)|||1 NO (SPST-NO)|
|Rated current/Maximum peak current|||A|6/15|||6/15|
|Rated voltage/Maximum switching voltage|||V AC|250/400|||250/400|
|Rated load AC1|||VA|1,500|||1,500|
|Rated load AC15 (230 V AC)|||VA|250|||250|
|Single phase motor rating (230 V AC)|||kW|0.185|||0.185|
|Breaking capacity DC1: 30/110/220 V||Breaking capacity DC1: 30/110/220 V|A|3/0.35/0.2|||3/0.35/0.2|
|Minimum switching load|mW (V/mA)|mW (V/mA)||500 (10/5)|||500 (10/5)|
|Standard contact material||||AgCdO|||AgCdO|
|Coil specification||||||||
|Nominal voltage (UN)|V AC (50/60 Hz)|||—|||—|
||||V DC|5 - 12 - 24 - 48|||5 - 12 - 24 - 48|
|Rated power AC/DC|VA (50 Hz)/W|VA (50 Hz)/W||—/0.2|||—/0.2|
|Operating range|||AC|—|||—|
||||DC|(0.78...1.5)UN|||(0.78...1.5)UN|
|Holding voltage||AC/DC||—/0.4 UN|||—/0.4 UN|
|Must drop-out voltage||AC/DC||—/0.1 UN|||—/0.1 UN|
|Technical data||||||||
|Mechanical life AC/DC||cycles||—/20 · 10<br>6|||—/20 · 10<br>6|
|Electrical life at rated load AC1||cycles||100 · 10<br>3|||100 · 10<br>3|
|Operate/release time|||ms|6/4|||6/2|
|Insulation between coil and contacts (1.2/50 µs) kV||||5|||5|
|Dielectric strength between open contacts|||V AC|1,000|||1,000|
|Ambient temperature range|||°C|–40…+85|||–40…+85|
|Environmental protection||||RT III|||RT III|
|Approvals(according to type)||||~~&~~|Nis|Nis||



1 

32 Series - Subminiature PCB relays 6 A 

## Ordering information 

Example: 32 series PCB, 1 NO (SPDT-NO) - 6 A contacts, 24 V sensitive DC coil. 

A B C D 3 2 . 2 1 . 7 . 0 2 4 . 2 3 0 0 

Series 

Type 2 = PCB mount No. of poles 1 = 1 pole, 6 A Coil version 7 = Sensitive DC Coil voltage See coil specifications 

A: Contact material 2 = Standard AgCdO 4 = AgSnO2 B: Contact circuit 0 = CO (SPDT) 3 = NO (SPST) 

D: Special versions 0 = Wash tight (RT III) 

C: Options 0 = None 

Selecting features and options: only combinations in the same row are possible. Preferred selections for best availability are shown in bold. 

|Coil version|A|B|C|D|
|---|---|---|---|---|
|sens. DC|**2** - 4|**0 - 3**|**0**|**0**|



## Technical data 

## Insulation according to EN 61810-1 

|Nominal voltage of supplysystem<br>V AC|Nominal voltage of supplysystem<br>V AC|230/400|230/400|
|---|---|---|---|
|Rated insulation voltage<br>V AC||250||
|Pollution degree||2||
|Insulation between coil and contact set||||
|Type of insulation||Basic||
|Overvoltage category||III||
|Rated impulse voltage<br>kV(1.2/50µs)||5||
|Dielectric strength<br>V AC||4,000||
|Insulation between open contacts||||
|Type of disconnection||Micro-disconnection||
|Dielectric strength<br>V AC/kV (1.2/50 µs)||1,000/1.5||
|Conducted disturbance immunity||||
|Burst(5...50)ns, 5 kHz, on A1 - A2||EN 61000-4-4|level 4(4 kV)|
|Surge (1.2/50 µs) on A1 - A2 (differential mode)||EN 61000-4-5|level 3 (2 kV)|
|Other data||||
|Bounce time: NO/NC<br>ms||2/10(changeover)|2/—(normallyopen)|
|Vibration resistance(5…55)Hz: NO/NC<br>g||10/10(changeover)|10/—(normallyopen)|
|Shock resistance|g|20||
|Power lost to the environment|without contact current<br>W|0.2||
||with rated current<br>W|0.5||
|Recommended distance between|relays mounted on PCB<br>mm|≥5||



2 

32 Series - Subminiature PCB relays 6 A 

## Contact specification 

F 32 - Electrical life (AC) v contact current 

**==> picture [251 x 141] intentionally omitted <==**

**----- Start of picture text -----**<br>
Resistive load - cosϕ = 1<br>Inductive load - cosϕ = 0.4<br>Cycles<br>**----- End of picture text -----**<br>


## H 32 - Maximum DC1 breaking capacity 

**==> picture [250 x 141] intentionally omitted <==**

**----- Start of picture text -----**<br>
DC voltage (V)<br>DC breaking current (A)<br>**----- End of picture text -----**<br>


- When switching a resistive load (DC1) having voltage and current values under the curve, an electrical life of ≥ 100·103 can be expected. 

- In the case of DC13 loads, the connection of a diode in parallel with the load will permit a similar electrical life as for a DC1 load. Note: the release time for the load will be increased. 

## Coil specifications 

DC coil data - 0.2 W sensitive 

## R 32 - DC coil operating range v ambient temperature 

**==> picture [511 x 141] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||
|---|---|---|---|---|---|
|Nominal|Coil|Operating range|Resistance|Rated coil|
|voltage|code|consumption|
|UN|Umin|Umax|R|I at UN|
|V|V|V|Ω|mA|
|5|7.005|3.9|7.5|125|40|
|12|7.012|9.4|18|720|16|
|24|7.024|18.7|36|2,880|8.3|
|48|7.048|37.4|72|11,520|4|

**----- End of picture text -----**<br>


- 1 - Max. permitted coil voltage. 

- 2 - Min. pick-up voltage with coil at ambient temperature. 

3