30.22.7.005.0020

30 **A** SЕRIES 

## Subminiature DIL relays 2 A 

Electronic circuit boards Hi-Fi systems Printers Toys 

Medical and dentistry Hoists and cranes Door and gate openers 

Prices, features, specifications, capabilities, appearance and availability of our products and services are subject to change without notice. FINDER assumes no responsibility for the presence of possible errors or insufficient information in this document. In case of discrepancies between the printed and online versions, the latter prevails. 

30 SERIES 

A 

## **Printed circuit mount** 

## **30.22** 

## **2 A signal relay** 

- 2 Pole changeover contacts Low level switching capability 

- Subminiature - industry standard DIL package 

- Sensitive DC coil - 200 mW 

- Wash tight: RT III 

- Cadmium Free contact material 

- Low coil power 

- Au clad contacts 

- PCB mount 

||For outline drawing see page 5||Copper side view|
|---|---|---|---|
||**Contact specification**<br>Contact configuration||2 CO (DPDT)|
||Rated current/Maximum peak current<br>A||2/3|
||Rated voltage/<br>Maximum switchingvoltage|V AC|125/250|
||Rated load AC1|VA|125|
||Rated load AC15 (230 V AC)|VA|25|
||Single phase motor rating (230 V AC)<br>kW||—|
||Breaking capacity DC1: 24/110/220 V<br>A||2/0.3/—|
||Minimum switching load|mW (V/mA)|10 (0.1/10)|
||Standard contact material<br>**Coil specification**<br>Nominal voltage (UN)|V AC (50/60 Hz)|AgNi + Au<br>—|
|||V DC|5 - 6 - 9 - 12 - 24 - 48|
||Rated power AC/DC|VA (50 Hz)/W|—/0.2|
||Operating range|AC|—|
|||DC|See table page 5|
||Holding voltage|AC/DC|—/0.35 UN|
||Must drop-out voltage<br>**Technical data**|AC/DC|—/0.05 UN|
||Mechanical life AC/DC|cycles|—/2 · 106|
||Electrical life at rated load AC1|cycles|100 · 103|
||Operate/release time|ms|6/4|
||Insulation between coil|||
||and contacts(1.2/50µs)|kV|1.5|
|I-2024, www.findernet.com|Dielectric strength<br>between open contacts<br>Ambient temperature range<br>Environmental protection<br>**Approvals**(according to type)|V AC<br>°C|750<br>–40…+85<br>RT III<br>®|



**3** 

30 SERIES 

## **Ordering information** 

Example:  30 series PCB relay, 2 CO (DPDT) - 2 A contacts, 12 V sensitive DC coil. 

A 

**A B C D** 

## **3 0 . 2 2 . 7 . 0 1 2 . 0 . 0 . 2 . 0** 

## **Series** 

## **Type** 

2 =  PCB mount 

## **No. of poles** 

2 =  2 pole, 2 A 

**A: Contact material** 

0 =  Standard AgNi + Au 

**B: Contact circuit** 

0 =  CO (DPDT) 

**D: Special versions** 

0 =  Wash tight (RT III) 

**C: Options** 

2 =  None 

## **Coil version** 

7 =  Sensitive DC 

## **Coil voltage** 

See coil specifications 

## **Technical data** 

|**Insulation according to EN 61810-1**|||
|---|---|---|
|Nominal voltage of supply system|V AC|125/250|
|Rated insulation voltage|V AC|250|
|Pollution degrees||1|
|**Insulation between coil and contact set**|||
|Type of insulation||Basic|
|Overvoltage category||I|
|Rated impulse voltage|kV (1.2/50 µs)|1.5|
|Dielectric strength|V AC|1000|
|**Insulation between adjacent contacts**|||
|Type of insulation||Basic|
|Overvoltage category||I|
|Rated impulse voltage|kV (1.2/50 µs)|1.5|
|Dielectric strength|V AC|1500|
|**Insulation between open contacts**|||
|Type of disconnection||Micro-disconnection|
|Dielectric strength|V AC/kV (1.2/50 µs)|750/1|
|**Other data**|||
|Bounce time: NO/NC|ms|2/6|
|Vibration resistance (10…38)Hz:|g|10|
|Shock resistance|g|10|
|Power lost to the environment|without contact current W|0.2|
||with rated current W|0.4|
|Recommended distance between relays mounted on PCB<br>mm||≥ 5|



**4** 

30 SERIES 

A 

## **Contact specification** 

## **F 30 - Electrical life (AC1) v contact current (125 V)** 

**==> picture [7 x 19] intentionally omitted <==**

**----- Start of picture text -----**<br>
Cycles<br>**----- End of picture text -----**<br>


Note: 

The rated current of 2 A corresponds to the limiting continuous current. 

## **Coil specifications** 

**DC coil data - 0.2 W sensitive** 

## **R 30 - DC coil operating range v ambient temperature** 

|Nominal<br>voltage<br>UN<br>V<br>5|Coil<br>code<br>**7**.005|Operating range<br>Umin<br>Umax<br>V<br>V<br>3.7<br>7.5|Operating range<br>Umin<br>Umax<br>V<br>V<br>3.7<br>7.5|Resistance<br>R<br>Ω<br>125|Rated coil<br>consumption<br>Iat UN<br>mA<br>40|
|---|---|---|---|---|---|
|6|**7**.006|4.5|9|180|33|
|9|**7**.009|6.7|13.5|405|22|
|12|**7**.012|8.4|18|720|16|
|24|**7**.024|16.8|36|2880|8.3|
|48|**7**.048|33.6|72|11520|4.8|



**==> picture [104 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 -   Max. permitted coil voltage.<br>**----- End of picture text -----**<br>


**2 -** Min. pick-up voltage with coil at ambient temperature. 

## **Outline drawing** 

Type 30.22 

Please see general technical information 

**5**