Image not available
Illustrative purposes only
2980665
Solid State Relay, 1 A, 300 VDC, DIN Rail, Screw
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: PHOENIX CONTACT
- Product type:
- Contact Configuration:-; Load Current:1A; Operating Voltage Max:300VDC; Relay Mounting:DIN Rail; Relay Terminals:Screw; Switching Mode:-; Operating Voltage Min:12VDC; Control Voltage Min:-
- SVHC: No SVHC (15-Jan-2018)
- Load Current: 1A
- Product Range: PLC-INTERFACE Series
- Relay Mounting: DIN Rail
- Switching Mode: -
- Relay Terminals: Screw
- Control Voltage Max: 12VDC
- Control Voltage Min: -
- Contact Configuration: -
- Operating Voltage Max: 300VDC
- Operating Voltage Min: 12VDC
| Delivery and price | |
|---|---|
| Units per pack | 10 |
| Price | 28.76 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
## **PLC-OS…/300DC/1**
## **PLC INTERFACE With Integrated Solid-State Relay**
## **INTERFACE**
Data Sheet 102491_en_04
© PHOENIX CONTACT 2010-12-22
## **1 Description**
The 6.2 mm **PLC-OS…/300DC/1** PLC INTERFACE module with screw or spring-cage connection has an integrated solid-state relay.
## **1.1 Input Voltages From 5 V to 230 V**
PLC-OS…/300DC/1 is available on the control side in all common industrial voltages from 5 V to 230 V. A further advantage is the ready-integrated input circuit. It consists of a status indicator and polarity reversal protection function, and ensures that the operating state is displayed clearly, also preventing destruction of the optical electronics should the polarity be accidentally reversed.
## **1.2 Plug-In Bridges Save Wiring**
The PLC INTERFACE module achieves maximum efficiency with the user-friendly FBST plug-in bridge system. PLC-OS…/300DC/1 makes effective use of the bridging options for the A1/A2 connection on the control side and for the supply at connection 13 on the load side. Especially efficient here are the 500 mm long color-insulated continuous plug-in bridges that can easily be cut to the required length and quickly inserted in the bridge shafts. They eliminate the need for complicated and timeconsuming loop bridges.
## **1.3 Additional Advantages**
- Switching power of up to 300 V DC/1 A
- Wear-resistant switching
- Integrated protective circuit
- Resistant to vibrations and shocks
- 4 kVrms electrical isolation between input and output
Make sure you always use the latest documentation. It can be downloaded at www.phoenixcontact.net/download. ~~GR~~ This data sheet is valid for all products listed on the following page: ~~Ee~~
**PLC-OS…/300DC/1**
## **2 Ordering Data**
|**PLC INTERFACE With Screw Connection, Housing Open on One Side**|**PLC INTERFACE With Screw Connection, Housing Open on One Side**|**PLC INTERFACE With Screw Connection, Housing Open on One Side**||||
|---|---|---|---|---|---|
|**Description**||**Type**|**Order No.**|**Pcs./Pck.**||
|PLC INTERFACE with integrated solid-state relay|5 V DC|PLC-OSC-5DC/300DC/1|2980652|10||
|PLC INTERFACE with integrated solid-state relay|12 V DC|PLC-OSC-12DC/300DC/1|2980665|10||
|PLC INTERFACE with integrated solid-state relay|24 V DC|PLC-OSC-24DC/300DC/1|2980678|10||
|PLC INTERFACE with integrated solid-state relay|48 V DC ... 60 V DC|PLC-OSC-60DC/300DC/1|2980681|10||
|PLC INTERFACE with integrated solid-state relay|110 V DC|PLC-OSC-110DC/300DC/1|2980694|10||
|PLC INTERFACE with integrated solid-state relay|125 V DC|PLC-OSC-125DC/300DC/1|2982210|10||
|PLC INTERFACE with integrated solid-state relay|220 V DC|PLC-OSC-220DC/300DC/1|2980704|10||
|PLC INTERFACE with integrated solid-state relay|120 V AC|PLC-OSC-120AC/300DC/1|2980717|10||
|PLC INTERFACE with integrated solid-state relay|230 V AC1|PLC-OSC-230AC/300DC/1|2980720|10||
|||||||
|**PLC INTERFACE With Spring-Cage**|**Connection, Housing Open on One Side**|||||
|**Description**||**Type**|**Order No.**|**Pcs./Pck.**||
|PLC INTERFACE with integrated solid-state relay|5 V DC|PLC-OSP-5DC/300DC/1|2980814|10||
|PLC INTERFACE with integrated solid-state relay|12 V DC|PLC-OSP-12DC/300DC/1|2980827|10||
|PLC INTERFACE with integrated solid-state relay|24 V DC|PLC-OSP-24DC/300DC/1|2980830|10||
|PLC INTERFACE with integrated solid-state relay|48 V DC ... 60 V DC|PLC-OSP-60DC/300DC/1|2980843|10||
|PLC INTERFACE with integrated solid-state relay|110 V DC|PLC-OSP-110DC/300DC/1|2980856|10||
|PLC INTERFACE with integrated solid-state relay|125 V DC|PLC-OSP-125DC/300DC/1|2982223|10||
|PLC INTERFACE with integrated solid-state relay|220 V DC|PLC-OSP-220DC/300DC/1|2980869|10||
|PLC INTERFACE with integrated solid-state relay|120 V AC|PLC-OSP-120AC/300DC/1|2980872|10||
|PLC INTERFACE with integrated solid-state relay|230 V AC1|PLC-OSP-230AC/300DC/1|2980885|10||
> 1 The PLC-ATP BK insulating plate must be installed for voltages greater than 250 V (L1, L2, L3) between the same terminal points on adjacent modules (see "Accessories"). FBST 8-PLC... or FBST 500... is then used for potential bridging.
For the protection of input and output, inductive loads must be dampened with an effective protective circuit.
|**Accessories**|**Accessories**|
|---|---|
|**Description**<br>**Type**<br>**Order No.**<br>**Pcs./Pck.**||
|Insulating plate<br>PLC-ATP BK<br>2966841<br>25||
||The PLC-ATP BK insulating plate should be used in the following cases: always fit at the start and end of a PLC terminal strip for voltages<br>greater than 250 V (L1, L2, L3) between the same terminal points on adjacent modules (FBST 8-PLC... or FBST 500... can be used for<br>potential bridging) and for safe isolation between adjacent modules.|
||The PLC-ATP BK insulating plate should be used in the following cases: always fit at the start and end of a PLC terminal strip for voltages<br>greater than 250 V (L1, L2, L3) between the same terminal points on adjacent modules (FBST 8-PLC... or FBST 500... can be used for<br>potential bridging) and for safe isolation between adjacent modules.|
|For additional accessories such as power terminal blocks and plug-in bridges, please refer to the INTERFACE catalog or www.phoenixcontact.com<br>.||
PHOENIX CONTACT **2**
**102491_en_04**
**PLC-OS…/300DC/1**
## **3 Technical Data**
|**Input Data**||||**DC**|||||**AC**|
|---|---|---|---|---|---|---|---|---|---|
|Nominal input voltage1|5 V DC|12 V DC|24 V DC|48 ... 60 V|110 V DC|125 V DC|220 V DC|120 V AC<br>230 V AC||
|||||DC||||||
|Permissible range (with reference to UN)||||0.8 ... 1.2 x UN||||0.8 ... 1.1 x UN||
|Switching level||||||||||
|1 signal ("H")||||≥0.8 x UN||||≥|0.8 x UN|
|0 signal ("L")||||≤0.4 x UN||||≤|0.4 x UN|
|Typical input current at UN|5 mA|6 mA|8 mA|5 mA|5 mA|6 mA|3 mA|3 mA|3 mA|
|Typical response time at UN|800 µs|300 µs|300 µs|300 µs|400 µs|400 µs|400 µs|19 ms|19 ms|
|Typical release time at UN|1.5 ms|800 µs|700 µs|700 µs|700 µs|700 µs|1.4 ms|6 ms|6 ms|
|Transmission frequency flimit||||50 Hz|||||50 Hz|
|Input circuit||Yellow LED, polarity protection, surge protection||||||Yellow LED,||
|||||||||surge protection,||
|||||||||bridge rectifier||
> 1 The PLC-ATP BK insulating plate must be installed for voltages greater than 250 V (L1, L2, L3) between the same terminal points on adjacent modules (see "Accessories"). FBST 8-PLC... or FBST 500... is then used for potential bridging.
|**Output Data**||
|---|---|
|Nominal output voltage range1|12 V DC ... 300 V DC|
|Limiting continuous current|1 A (see "Derating Curve" on page 4)|
|Output configuration|2-wire floating|
|Output circuit|Protection against polarity reversal, surge protection|
|Voltage drop at maximum limiting continuous current|< 500 mV|
> 1 The PLC-ATP BK insulating plate must be installed for voltages greater than 250 V (L1, L2, L3) between the same terminal points on adjacent modules (see "Accessories"). FBST 8-PLC... or FBST 500... is then used for potential bridging.
|**General Data**||
|---|---|
|Rated insulation voltage|300 V|
|Impulse voltage withstand level|4 kV, 50 Hz, 1 minute|
|Ambient temperature range|-20°C ... 60°C|
|Nominal operating mode|100% operating factor|
|Inflammability class according to UL 94 (housing)|V0|
|Air and creepage distances between the circuits1|DIN EN 50178 (basic insulation)|
|Pollution degree|2|
|Surge voltage category|III|
|Mounting position|Any|
|Assembly|Can be aligned without spacing|
|Conductor cross section||
|Screw connection|0.14 mm2... 2.5 mm2|
|Spring-cage connection|0.2 mm2... 2.5 mm2|
|Stripping length|8 mm|
|Dimensions (W x H x D)|6.2 mm x 86 mm x 80 mm|
|Housing material|Polybutylene terephthalate PBT non-reinforced, green|
> 1 The PLC-ATP BK insulating plate must be installed for safe isolation between adjacent modules (see "Accessories"). FBST 8-PLC... or FBST 500... is then used for potential bridging.
|**Tests/Approvals**||
|---|---|
|CE|c|
|UL|Applied for|
|CUL|Applied for|
|GL|Applied for|
PHOENIX CONTACT **3**
**102491_en_04**
**PLC-OS…/300DC/1**
## **4 Block Diagram**
**==> picture [235 x 93] intentionally omitted <==**
**----- Start of picture text -----**<br>
14<br>A1 14<br>A2 13+<br>A2 13+<br>**----- End of picture text -----**<br>
## **5 Derating Curve**
**==> picture [234 x 128] intentionally omitted <==**
**----- Start of picture text -----**<br>
1<br>0,7<br>1<br>0<br>30 40 50 60<br>Ambient temperature [°C]<br>1 For input voltages of 220 V DC and 230 V AC<br>Load current [A]<br>**----- End of picture text -----**<br>
**PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany • Phone: +49-(0) 5235-3-00 PHOENIX CONTACT • P.O.Box 4100 • Harrisburg • PA 17111-0100 • USA • Phone: +717-944-1300 www.phoenixcontact.com**
**4**
**102491_en_04**
Updated at June 5, 2026
Phoenix Contact is a global leader in industrial connection technology, automation systems, and electronic interface solutions. With decades of engineering heritage originating in Germany, the company develops robust components designed to ensure reliable power, data, and signal transmission across demanding manufacturing and industrial environments. The cornerstone of the Phoenix Contact portfolio is its industry-leading selection of connection technologies. The range features an exceptional variety of terminal blocks, including pluggable headers and sockets, highly reliable wire-to-board solutions, and versatile DIN rail terminal blocks. These foundational connectivity components are supported by a comprehensive ecosystem of power distribution blocks, interface modules, marking systems, and accessories engineered for seamless control cabinet wiring. Beyond physical connectivity, Phoenix Contact provides critical components for advanced automation, control, and system protection. The wider offering encompasses a broad spectrum of process controllers, high-efficiency AC/DC converters, and a comprehensive suite of power, safety, and solid-state relays. From precision signal converters and electronic circuit breakers to fiber optic cable assemblies, Phoenix Contact equips engineers with the high-performance technologies required to build secure, highly efficient, and future-ready industrial systems.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →