285-154

Data Sheet | Item Number: 285-154 2-conductor through terminal block; 50 mm²; lateral marker slots; only for DIN 35 x 15 rail; POWER CAGE CLAMP; 50,00 mm²; blue https://www.wago.com/285-154 

|pia)<br>———— 94nm/3:7|pia)<br>94nm/3:7|pia)<br>94nm/3:7in————|pia)<br>————||im<br>4|im|im||
|---|---|---|---|---|---|---|---|---|
|Color:<br>blue<br>||||||||||
|Electrical data|||||||||
|Ratings per|||IEC/EN 60947-7-1||Approvals per||UL 1059||
|Overvoltage category||III|III|II|Use group|B|C|D|
|Pollution degree||3|2|2|Rated voltage|600 V|600 V|-|
|Nominal voltage||1000 V|-|-|Rated current<br>.|150 A|150 A|-|
|Rated surge voltage||8 kV|-|-|||||
|Rated current||150 A|-|-|||||
|.|||||||||
|Approvals per|||CSA 22.2 No 158||Power Loss||||
|Use group||B|C|D|Power loss, per pole (potential)|4.725 W|||
|Rated voltage||600 V|600 V|-|Rated current INfor specified power loss|150 A|||
|Rated current||150 A|-|-|Resistance value for specified, current-|0.0001 Ω|||
|.|||||dependent power loss||||
||||||.||||
|Connection data|||||||||
|Clamping units|2||||Connection 1||||
|Total number of potentials|1||||Connection technology|POWER CAGE CLAMP|||
|Number of levels|1||||Actuation type|T-wrench; 8 mm|||
|Number of jumper slots|2||||Connectable conductor materials|Copper|||
||||||Nominal cross-section|50 mm²|||
|.|||||||||
||||||Solid conductor|10 … 50 mm² / 8 … 1/0 AWG|10 … 50 mm² / 8 … 1/0 AWG||
||||||Stranded conductor|10 … 50 mm² / 8 … 1/0 AWG|10 … 50 mm² / 8 … 1/0 AWG||
||||||Fine-stranded conductor|10 … 70 mm² / 8 … 2/0 AWG|10 … 70 mm² / 8 … 2/0 AWG||
||||||Fine-stranded conductor; with insulated|10 … 50 mm² / 8 … 1/0 AWG|10 … 50 mm² / 8 … 1/0 AWG||
||||||ferrule||||
||||||Fine-stranded conductor; with uninsula­|10 … 50 mm² / 8 … 1/0 AWG|10 … 50 mm² / 8 … 1/0 AWG||
||||||ted ferrule||||
||||||Strip length|30 mm / 1.18 inches|30 mm / 1.18 inches||
||||||Wiring direction|Side-entry wiring|||
||||||.||||
|Page 1/9||||Version 02.10.2024|Version 02.10.2024||Continued on next page||



Data Sheet | Item Number: 285-154 https://www.wago.com/285-154 

||Physical data||||
|---|---|---|---|---|
||Width||20 mm / 0.787 inches||
||Height||94 mm / 3.701 inches||
||Depth from upper-edge of DIN-rail||87 mm / 3.425 inches||
|.|||||
||Mechanical data||||
||Mounting type||DIN-rail 35 x 15||
||Mounting (note)||only suitable for DIN 35 x 15 rail||
||Marking level||Side marking||
|.|||||
||Material data||||
||Note (material data)||||
||||Information on material specifications can be found here||
||Color||blue||
||Material group||I||
||Insulation material (main housing)||Polyamide (PA66)||
||Flammability class per UL94||V0||
||Fire load||2.168 MJ||
||Weight||159.1 g||
|.|||||
||Environmental requirements||||
||Processing temperature|-35 … +85 °C|Environmental Testing (Environmental Conditions)||
||Continuous operating temperature|-60 … +105 °C|Test specification|DIN EN 50155 (VDE 0115-200):2022-06|
||||Railway applications –||
|.|||Rolling stock –||
||||Electronic equipment||
||||Test procedure|DIN EN 61373 (VDE 0115-0106):2011-04|
||||Railway applications –||
||||Rolling stock equipment –||
||||Shock and vibration tests||
||||Spectrum/Installation location|Service life test, Category 1, Class A/B|
||||Function test with noise-like vibration|Test passed according to Section 8 of|
|||||the standard|
||||Frequency|f1= 5 Hz to f2= 150 Hz|
|||||f1= 5 Hz to f2= 150 Hz|
||||Acceleration|0.101g (highest test level used for all|
|||||axes)|
|||||0.572g (highest test level used for all|
|||||axes)|
|||||5g (highest test level used for all axes)|
||||Test duration per axis|10 min.|
|||||5 h|
||||Test directions|X, Y and Z axes|
|||||X, Y and Z axes|
|||||X, Y and Z axes|
||||Monitoring for contact faults/interrupti­|Passed|
||||ons||
||||Voltage drop measurement before and|Passed|
||||after each axis||
||||Simulated service life test through incre­|Test passed according to Section 9 of|
||||ased levels of noise-like vibration|the standard|
||||Extended test scope: Monitoring for con­|Passed|
||||tact faults/interruptions|Passed|
||||Extended test scope: Voltage drop mea­|Passed|
||||surement before and after each axis|Passed|
||||Shock test|Test passed according to Section 10 of|
|||||the standard|
||||Shock form|Half sine|
||||Shock duration|30 ms|
||||Number of shocks per axis|3 pos. und 3 neg.|



Page 2/9 Version 02.10.2024 Continued on next page 

# Data Sheet | Item Number: 285-154 https://www.wago.com/285-154 ~~a~~ 

|https://www.wago.com/285-154-154154<br>Data Sheet | Item Number: 285-154<br>~~a~~|https://www.wago.com/285-154-154154<br>Data Sheet | Item Number: 285-154<br>~~a~~|https://www.wago.com/285-154-154154<br>Data Sheet | Item Number: 285-154<br>~~a~~||wAco|wAco|
|---|---|---|---|---|---|
|Environmental Testing (Environmental Conditions)||||||
|Vibration and shock stress for rolling||Passed||||
|stock equipment||||||
|.||||||
|Commercial data<br>SS—-—-—E—E—E—E—E—EeEeEeEeEeEEeEEEEEEEEEe||||||
|Product Group|||1 (Rail Mounted Terminal Blocks)|||
|eCl@ss 10.0|||27-14-11-20|||
|eCl@ss 9.0|||27-14-11-20|||
|ETIM 9.0|||EC000897|||
|ETIM 8.0|||EC000897|||
|PU (SPU)|||5 pcs|||
|Packaging type|||Box|||
|Country of origin|||PL|||
|GTIN|||4045454507428|||
|Customs tariff number|||85369010000|||
|.||||||
|Environmental Product Compliance<br>SS—-—-—E—E—E—E—E—EeEeEeEeEeEEeEEEEEEEEEe||||||
|RoHS Compliance Status|||Compliant,No Exemption|||
|.||||||
|Approvals / Certificates<br>General approvals<br>iii|||Declarations of conformity and manufacturer's declarations||Declarations of conformity and manufacturer's declarations|
|(CA @ ke WA|||@|||
|Approval|Standard|Certificate Name|Approval|Standard|Certificate Name|
|CCA|EN 60947|NTR NL-7707|EU-Declaration of Confor­|-|-|
|DEKRA Certification B.V.|||mity|||
|CSA<br>DEKRA Certification B.V.|C22.2 No. 158|154112|WAGO GmbH & Co. KG<br>Railway|-|Z00004420.000|
|KEMA/KEUR<br>DEKRA Certification B.V.|EN 60947|71-105562|WAGO GmbH & Co. KG<br>UK-Declaration of Confor­|-|-|
|UL<br>Underwriters Laboratories|UL 1059|E45172|mity<br>WAGO GmbH & Co. KG|||
|Inc.||||||
||||.|||
|.||||||
|Approvals for marine applications||||||
|Approval|Standard|Certificate Name||||
|ABS|EN 60947|20-HG1941090-PDA||||
|American Bureau of Ship­||||||
|ping||||||
|DNV GL|-|TAE00001V2||||
|Det Norske Veritas, Ger­||||||
|manischer Lloyd||||||
|.||||||
|Page 3/9|||Version 02.10.2024||Continued on next page|



# Approvals / Certificates iii General approvals 

# Data Sheet | Item Number: 285-154 https://www.wago.com/285-154 ~~a~~ 

# Downloads ~~i~~ Environmental Product Compliance Compliance Search 

Environmental Product Compliance 285-154 ~~es~~ . Documentation Additional Information Bid Text Technical Section pdf 285-154 xml 2246.92 KB 19.02.2019 3.25 KB ~~eee~~ . 285-154 04.01.2018 doc23.50 KB . CAD/CAE-Data CAD data CAE data 2D/3D Models 285-154 EPLAN Data Portal 285-154 ~~en eee~~ . WSCAD Universe285-154 ~~Ny~~ ZUKEN Portal 285-154 . 1 Compatible Products ~~i~~ 1.1 Optional Accessories 1.1.1 Cover 1.1.1.1 Cover ~~a.~~ Item No.: 285-441 Finger guard; touchproof cover protects unused conductor entries and jumper slots; for 50 mm² high-current tbs; yellow . 1.1.2 Current and voltage tap 1.1.2.1 Current and voltage tap ~~—-~~ Item No.: 855-501/150-000 Current and voltage tap up to 50 mm²; Pri­ mary rated current: 150 A; Secondary ra­ ted current: 1 A; Rated power: 0.2 VA; Ac­ curacy class: 0.5; fused . Page 4/9 Version 02.10.2024 Continued on next page 

Continued on next page 

Data Sheet | Item Number: 285-154 https://www.wago.com/285-154 ~~a~~ 

|1.1.3 DIN-rail||||||||
|---|---|---|---|---|---|---|---|
|1.1.3.1 Mounting accessories||||||||
|S$|ae||||e&|&||
|Item No.: 210-198|Item No.: 210-508|||Item No.: 210-197||Item No.: 210-506||
|Copper carrier rail; 35 x 15 mm; 2.3 mm|Steel carrier rail; 35 x 15 mm; 1.5 mm|||Steel carrier rail; 35 x 15 mm; 1.5 mm||Steel carrier rail; 35 x 15 mm; 1.5 mm||
|thick; 2 m long; unslotted; according to EN|thick; 2 m long; slotted; galvanized; simi­|||thick; 2 m long; slotted; similar to EN||thick; 2 m long; unslotted; galvanized; si­||
|60715; copper-colored|lar to EN 60715; silver-colored|||60715; silver-colored||milar to EN 60715; silver-colored||
|a||||||||
|Item No.: 210-114||||||||
|Steel carrier rail; 35 x 15 mm; 1.5 mm thick;||||||||
|2 m long; unslotted; similar to EN 60715;||||||||
|silver-colored||||||||
|.||||||||
|1.1.4 Ferrule||||||||
|1.1.4.1 Ferrule||||||||
|l|||||||||
|Item No.: 216-424|Item No.: 216-425|||||||
|Ferrule; Sleeve for 35 mm² / AWG 2; unin­|Ferrule; Sleeve for 50 mm² / AWG 1; unin­|Ferrule; Sleeve for 50 mm² / AWG 1; unin­||||||
|sulated; electro-tin plated; electrolytic|sulated; electro-tin plated; electrolytic|||||||
|copper; gastight crimped; acc. to DIN|copper; gastight crimped; acc. to DIN|||||||
|46228, Part 1/08.92; silver-colored|46228, Part 1/08.92|||||||
|.||||||||
|1.1.5 Installation||||||||
|1.1.5.1 Mounting accessories||||||||
|i||(.)||||||
|Item No.: 285-448|Item No.: 249-197|||||||
|Fixing element; for 50 mm² high-current|Screwless end stop; 14 mm wide; for DIN-|||||||
|terminal blocks; orange|rail 35 x 15 and 35 x 7.5; gray|rail 35 x 15 and 35 x 7.5; gray||||||
|.||||||||
|1.1.6 Jumper||||||||
|1.1.6.1 Jumper||||||||
|Item No.: 285-450||||||||
|Jumper; insulated; gray||||||||
|.||||||||
|1.1.7 Marking||||||||
|1.1.7.1 Group marker carrier||||||||
|x||||||||
|Item No.: 249-105||||||||
|Group marker carrier; gray||||||||
|.||||||||
|Page 5/9||Version 02.10.2024|||||Continued on next page|



**==> picture [557 x 824] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||||||
|---|---|---|---|---|---|---|---|---|
|Data Sheet | Item Number: 285-154|
|https://www.wago.com/285-154|
|a|wWAGco|
|1.1.7.2 Marker|
|Ei|=|=|=|
|Item No.: 793-5501/000-006|Item No.: 793-5501/000-014|Item No.: 793-5501/000-007|Item No.: 793-5501/000-023|
|WMB marking card; as card; for terminal|WMB marking card; as card; for terminal|WMB marking card; as card; for terminal|WMB marking card; as card; for terminal|
|block width 5 - 17.5 mm; stretchable 5 -|block width 5 - 17.5 mm; stretchable 5 -|block width 5 - 17.5 mm; stretchable 5 -|block width 5 - 17.5 mm; stretchable 5 -|
|5.2 mm; plain; snap-on type; blue|5.2 mm; plain; snap-on type; brown|5.2 mm; plain; snap-on type; gray|5.2 mm; plain; snap-on type; green|
|=|
|Item No.: 793-5501/000-017|Item No.: 793-5501/000-012|Item No.: 793-5501/000-005|Item No.: 793-5501/000-024|
|WMB marking card; as card; for terminal|WMB marking card; as card; for terminal|WMB marking card; as card; for terminal|WMB marking card; as card; for terminal|
|block width 5 - 17.5 mm; stretchable 5 -|block width 5 - 17.5 mm; stretchable 5 -|block width 5 - 17.5 mm; stretchable 5 -|block width 5 - 17.5 mm; stretchable 5 -|
|5.2 mm; plain; snap-on type; light green|5.2 mm; plain; snap-on type; orange|5.2 mm; plain; snap-on type; red|5.2 mm; plain; snap-on type; violet|
|="|="|="|
|_|Item No.: 793WMB marking card; as card; for terminal-5501|Item No.: 793WMB marking card; as card; for terminal-5501/000-002|Item No.: 793WMB marking card; as card; not stretcha­-501/000-006|Item No.: 793WMB marking card; as card; not stretcha­-501/000-007|
|block width 5 - 17.5 mm; stretchable 5 -|block width 5 - 17.5 mm; stretchable 5 -|ble; plain; snap-on type; blue|ble; plain; snap-on type; gray|
|5.2 mm; plain; snap-on type; white|5.2 mm; plain; snap-on type; yellow|
|==|
|Item No.: 793-501/000-023|Item No.: 793-501/000-017|Item No.: 793-501/000-012|Item No.: 793-501/000-005|
|WMB marking card; as card; not stretcha­|WMB marking card; as card; not stretcha­|WMB marking card; as card; not stretcha­|WMB marking card; as card; not stretcha­|
|ble; plain; snap-on type; green|ble; plain; snap-on type; light green|ble; plain; snap-on type; orange|ble; plain; snap-on type; red|
|=|
|Item No.: 793-501/000-024|_:|Item No.: 793-501|Item No.: 793-501/000|="|-002|Item No.: 2009-115/000|@|-006|
|WMB marking card; as card; not stretcha­|WMB marking card; as card; not stretcha­|WMB marking card; as card; not stretcha­|WMB-Inline; for Smart Printer; 1500 pie­|
|ble; plain; snap-on type; violet|ble; plain; snap-on type; white|ble; plain; snap-on type; yellow|ces on roll; stretchable 5 - 5.2 mm; plain;|
|snap-on type; blue|
|@@|
|Item No.: 2009-115/000-007|Item No.: 2009-115/000-023|Item No.: 2009-115/000-017|Item No.: 2009-115/000-012|
|WMB-Inline; for Smart Printer; 1500 pie­|WMB-Inline; for Smart Printer; 1500 pie­|WMB-Inline; for Smart Printer; 1500 pie­|WMB-Inline; for Smart Printer; 1500 pie­|
|ces on roll; stretchable 5 - 5.2 mm; plain;|ces on roll; stretchable 5 - 5.2 mm; plain;|ces on roll; stretchable 5 - 5.2 mm; plain;|ces on roll; stretchable 5 - 5.2 mm; plain;|
|snap-on type; gray|snap-on type; green|snap-on type; light green|snap-on type; orange|
|@|@|@|@|
|Item No.: 2009-115/000-005|Item No.: 2009-115/000-024|Item No.: 2009-115|Item No.: 2009-115/000-002|
|WMB-Inline; for Smart Printer; 1500 pie­|WMB-Inline; for Smart Printer; 1500 pie­|WMB-Inline; for Smart Printer; 1500 pie­|WMB-Inline; for Smart Printer; 1500 pie­|
|ces on roll; stretchable 5 - 5.2 mm; plain;|ces on roll; stretchable 5 - 5.2 mm; plain;|ces on roll; stretchable 5 - 5.2 mm; plain;|ces on roll; stretchable 5 - 5.2 mm; plain;|
|snap-on type; red|snap-on type; violet|snap-on type; white|snap-on type; yellow|
|.|
|1.1.7.3 Marker carrier|
|S|
|Item No.: 285-442|
|Adaptor; gray|
|.|
|1.1.8 Power tap|
|1.1.8.1 Power tap|
|=)|
|Item No.: 285-447|
|Power tap; for 50 mm² high-current tbs;|
|Module width 16 mm; gray|
|.|
|Page|6/9|Version 02.10.2024|Continued on next page|

**----- End of picture text -----**<br>


- Data Sheet | Item Number: 285-154 https://www.wago.com/285-154 ~~a~~ 1.1.9 Protective warning marker 

1.1.9.1 Cover Item No.: 285-440 Item No.: 285-449 Protective warning marker; with high-vol­ Protective warning marker; yellow tage symbol, black; yellow . 1.1.10 Tool 1.1.10.1 Operating tool Item No.: 285-172 Item No.: 285-173 Allen wrench; with a partially insulated Allen wrench; with a partially insulated shaft; green shaft; with anti-rotation protection; green . Installation Notes ~~i~~ Installation ~~a~~ | Snapping a terminal block onto DIN-rail (to Removing a terminal block from the as­ the left or to the right). sembly (to the left or to the right). . Conductor termination mc RF ~~&~~ For the optimal clamping force: Always observe the on-unit printed strip **Conductor termination – step 1: Conductor termination – step 2:** length guide! Rotate the T-wrench counter-clockwise Insert a stripped conductor into the clam­ • Bend conductor to the stop  . Next, push in the orange ping unit until it hits the backstop. Hold in • Cut conductor to length (conductor end locking tab. The clamp is locked open for this position. must be straight) hands-free wiring. • Strip conductor & **Conductor termination – step 3:** A short counter-clockwise rotation   relea­ ses the tab. When unlocked, the T-wrench rotates clockwise, securely clamping the conductor. . Page 7/9 Version 02.10.2024 Continued on next page 

# Data Sheet | Item Number: 285-154 https://www.wago.com/285-154 Commoning 

Commoning with an adjacent jumper: in­ Removing jumper via operating tool. sert the jumper above the conductor ent­ ry hole – prior to conductor termination. The nominal cross-section remains un­ changed. . Cover Protective warning marker may indicate: Yellow, detachable finger guards provide Notice: Power is still on even after swit­ touch-proof safety by shielding jumper ching off the main switch! contact slots and/or unused conductor entries. . Power tap Easily and consistently tap directly into the power supply. Insert the unwired tap before opening the clamping unit. . Security Risk of Injury! Do not insert fingers in the conductor ent­ ry! . Testing Testing via touch-proof 4 mm Ø test plugs Testing (not available from WAGO, but offered by Voltage measurements can be perfor­ industry suppliers such as, Multi-Contact med, e.g., using a 2-pole voltage tester Deutschland GmbH). (Item No. 206-707). .[me,] Page 8/9 Version 02.10.2024 Continued on next page 

- Data Sheet | Item Number: 285-154 https://www.wago.com/285-154 Marking cas > 

- se S&S <9 

- SF a a> ‘ ee” Paae **S** cS 3 eo fy 3S 

- WMB markers or self-adhesive, printable Marker carrier (Item No. 285‑442) for mar­ marking strips can be accommodated on king strips (Item No. 2009-110) or 2 WMB 35, 50 and 95 mm² high-current terminal markers for 285‑13x, 285‑15x and blocks. 285‑19x Terminal Blocks 

- . Subject to changes. Please also observe the further product documentation! Current addresses can be found at:: www.wago.com Page 9/9 Version 02.10.2024