2071366-2

## **LIGHTING RELAY GUIDE** CONTROL PROTECT POWER 

Whether you are designing your lighting or outlet controller for 120v, 277, 347, or 480v, TE Connectivity (TE) has extensive capabilities in the design and manufacture of relays for the task. 

Meeting the inrush current requirements of National Electrical Manufacturers Association (NEMA) 410 and complying with standardized PCB footprints, TE lighting relays portfolio covers 1A, single fixture control all the way up to 20A branch circuit ratings. 

Through agency approved test labs, we ensure that our relays are tested to meet the expectations of the lighting industry. 

Outdoor Wall Switch / Dimmer Occupancy Sensor Power Pack Controller 

**==> picture [136 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
Electronic Ballast / LED Driver<br>**----- End of picture text -----**<br>


**==> picture [78 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Controlled Outlet<br>**----- End of picture text -----**<br>


INDUSTRIAL /// LIGHTING RELAY GUIDE 

**Lighting Relay Guide** 

Key Features 

## **SCHRACK RT** 

DC and AC coil Mono-or bistable coil Reinforced insulation WG type available (IEC 60335-1) High ambient temperature version (105°C) THR (reflow) version Sensitive version Bifurcated contacts 

**SCHRACK RT INRUSH** For inrush peak currents up to 80A Mono-or bistable coil Reinforced insulation WG type available (IEC 60335-1) 

## **SCHRACK RTX** 

Inrush peak currents up to 370A Bistable coil Reinforced insulation 16A rated fluorescent load acc. EN60669-1 8A electronic ballast acc. UL508 1 1/2 HP motor load acc. UL508 

Footprint 2) see footnote below 

S0418-CM 

**==> picture [520 x 407] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||
|---|---|---|---|
|HVAC, Home automation,|Lighting applications, Movement|Lighting control systems|
|Applications|
|Machine control, Energy control|detectors, Motors control,|Motion sensors|
|Switching cabinet, Interface modules|Domestic appliances|Home automation applications|
|Contact Data|
|Contact arrangement|1. form C (CO), 1 form A (NO)|1 form C (CO)|1 form A (NO)|
|2 form C (CO), 2 form A (NO)|1 form A (NO)|250VAC|
|Rated voltage|250VAC|250VAC|16A|
|Rated current|2X8/16A|16A|4000VA|
|Switching power / Max. breakContact material|2X2000/4000VA|4000VA|W (pre-make contact) + AgSnO2|
|Min. recommended|AgNi90/10, AgSnO2|AgNi90/10, AgSnO2|
|contact load|1) see footnote below|1) see footnote below|1) see footnote below|
|Coil Data|
|Magnetic system|DC, AC, bistable|DC, bistable|Bistable|
|Rated coil voltage|5 to 110VDC/24 to 230VAC|5 to 11VDC|5 to 48VDC|
|Rated coil power|400mW/0.75VA|400mW|650mW/665mW|
|Dielectric Strength|
|Initial dielectric strength|
|between open contacts|1000Vrms|1000Vrms|1250Vrms|
|between contact and coil|5000Vrms|5000Vrms|5000Vrms|
|between adjacent contacts|2500Vrms|
|Clearance/creepage|
|between contact and coil|>10/10mm|>10/10mm|min. 6/6mm|
|Other Data|
|Ambient temperature (max.)|+75°C (AC type)|+85°C|+70°C|
|+85°C|
|Category of environmental|RTII, RTIII|RTII|RTII|
|protection IEC61810|
|Terminal type|THT, THR (DC and AC type)|THT|THT|
|Mounting|PCB or on socket|PCB or socket|PCB|
|Dimensions (lwh)|29x12.7x15.7mm|29x12.7x15.7mm|29.1x12.7x16mm|
|Accessories|PCB and DIN rail sockets|
|Link to datasheet|SCHRACK RT|SCHRACK RT INRUSH|SCHRACK RTX|

**----- End of picture text -----**<br>


1)   Recommended minimum load indication for contact material: AU and gold plated: 1mA at 6VDC; AgNi0.15 and AgNi90/10: 2)  Footprint images are representative. For a complete selection, refer to the TE 10mA at 12VDC: AgCdO and AgSnO2: 100mA at 12VDC. Please contact technical support for detailed technical data. data sheet via the link above. 

INDUSTRIAL /// LIGHTING RELAY GUIDE 

## **Lighting Relay Guide** 

||**Axicom IM**|||||**SCHRACK PE**|**SCHRACK PE**||**Potter & Brumfield T9G**|**Potter & Brumfield T9G**|**Potter & Brumfield T9G**||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|Key Features|4G telecom/signal relay/switching relay<br>Slim line 10x6mm, low-profile 5.65mm<br>Switching power 60W/62.5VA<br>Switching voltage 220VDC/250VAC|||||Low height 10.0mm<br>Sensitive 200mW coil<br>Mono-or bistable coil|||High breaking capacity<br>PCB and quick connect connections<br>4kV/8mm coil-contact||||
||Monostable + Bistable|||||WG type available (IEC 60335-1)|||Minimum board space||||
||Low rated coil power||||||||(29mm x 21.5mm)||||
||High  dielectric version||||||||UL-class F as standard||||
||High current version up to 5 A|||High current version up to 5 A|High current version up to 5 A||||||||
||High contact stability  version||||||||||||
||Bifurcated contacts + single contact||||||||||||
||<=a||||||||||||
|Footprint<br>2) see footnote below|~~3~~22~~2~~2~~2~~<br>ar<br>~~ar~~<br>~~HH~~<br>~~ate~~<br>1~~.~~2+£0~~.~~15 0~~.~~7+0.~~1~~|||||O13<br>wee 252,54)<br>tt{1t14KI I<br>Y<br>| Prepegeqeqededes*<br>wo<br>Mo<br>~<br>tial|||serene<br>a<br>iG a eal<br>i¢—1-<br>m1|tpn"<br>Z<br>fagotto<br>[:<br>aq<br>oo<br>a|||
|Applications|Telecommunication, access and<br>transmission equipment<br>Thermostat controls, fire and security<br>equipment|||||Industrial electronics<br>White goods<br>Measurement and control|||HVAC, Appliances<br>Industrial control<br>Energy management||||
||Measurement and test equipment,||Measurement and test equipment,||||||||||
||Industrial controls, medical equipment||||||||||||
|Contact Data|||||||||||||
|Contact arrangement|2 form C, 2 CO|||||1 form C (CO)|||1 form C (1 CO)||||
||Single contact + Bifurcated contacts||||||||1 form B (1 NC)||||
||||||||||1 form A (1 NO)||||
|Rated voltage|250VAC/220VDC|||||250VAC|||250VAC||||
|Rated current|2/5A|||||5A (CO)|||30A||||
|||||||6A (NO)|||||||
|Switching power / Max. break|60W/62.5VA|||||1250VA|||||||
|Contact Material<br>Min. recommended contact load|100µV/1µA|||||AgNi 90/10, AgSnO2<br>1) see footnote below|||AgSnO2<br>1A at 12VAC/VDC||||
|Initial contact resistance|<50mΩat 10mA/30mV I: < 100mΩ||||||||||||
|Coil Data|||||||||||||
|Magnetic system|Polarized|||||DC, bistable|||DC||||
|Rated coil voltage|1.5 to 24VDC|||||3 to 48VDC|||5 to 110VDC||||
|Rated coil power|50 to 200mW-/-|||||200mW|||900mW||||
|DC coil / bistable 1 coil/2 coils|||||||||||||
|Dielectric Strength|||||||||||||
|Initial dielectric strength|||||||||||||
|between open contacts|750 to 1500Vrms|||||1000Vrms|||1500Vrms||||
|between contact and coil|1500 to 1800Vrms|||||4000Vrms|||4000Vrms||||
|between adjacent contacts|750 to 1800Vrms||||||||||||
|Initial surge withstand voltage|||||||||||||
|between open contacts|1000 to 2500V||||||||||||
|between contact and coil|2000 to 2500V||||||||||||
|between adjacent contacts|1000 to 2500V||||||||||||
|Isolation 100/900MHz|37.0/18.8dB||||||||||||
|Insertion loss 100/900MHz|0.03/0.33dB||||||||||||
|Volt. standing wave ratio|1.06/1.49||||||||||||
|100/900MHz|||||||||||||
|Capacitance<br>between open contacts|max. 1pF|||||3.2/4mm|||6.4mm / 9.5mm (UL)<br>8mm / 8mm (IEC)||||
|Other Data|||||||||||||
|Ambient temperature (max.)|-40 to +85°C|||||+ 85°C|||+105°C||||
|Category of environmental|IP67/RTV|||||RTII, RTIII|||RTII, RTIII||||
|protection|||||||||||||
|Terminal type|THT, SMT|||||THT|||THT/Quick connect||||
|Mounting||||||PCB|||PCB||||
|Dimension (lwh)|10x6x5.65mm|||||20x10x10mm|||29x21.5x15.7mm||||
|Link to datasheet|AXICOM IM|||||SCHRACK PE|||POTTER & BRUMFIELD T9G||||



1)   Recommended minimum load indication for contact material: AU and gold plated: 1mA at 6VDC; AgNi0.15 and AgNi90/10: 2)  Footprint images are representative. For a complete selection, refer to the TE 10mA at 12VDC: AgCdO and AgSnO2: 100mA at 12VDC. Please contact technical support for detailed technical data. data sheet via the link above. 

INDUSTRIAL /// LIGHTING RELAY GUIDE 

**Lighting Relay Guide** 

## Key Features 

## **EW60** 

1 pole 60A, 1 form A (NO) contact Polarized bistable (latching) with 1 or 2 coils NEMA 410-2011, 16A, 277VAC, electronic ballast; 20A branch circuit 480A inrush, 2.1m sec 

## **Axicom P2 LIGHTING** 

Small signal relay Slim line 15x7.5mm 

Switching current max. 5A High dielectric strength 3kV VDE certified for LED tubes 

**==> picture [482 x 400] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||||
|---|---|---|---|---|---|---|---|
|Footprint|
|:|Ay|4|1)|:|ii]|3laje|°|
|2) see footnote below|
|YP|q|10.7|
|0,95|0,9|40,1|
|=||87|be|||
|.|see|:|P2|SMT|L|Layout|
|Applications|Lighting control, bus actuator,|LED tubes|
|power distribution, circuit protection, inverter|Office equipment|
|Security systems, set top boxes|
|Contact Data|
|Contact arrangement|1 form A (1 NO)|2 form C, 2 CO|
|Bifurcated contacts|
|Rated voltage|440VAC|250VAC/220VDC|
|Rated current|60A|2A|
|Switching power / Max. break|15000VA|60W/62.5VA|
|Contact material|AgSnO2|
|Min. recommended contact load|Visit|TE.com|for more information|100µV/1µA|
|Initial Contact resistance|<50mΩ at 10mA/20mV|
|Coil Data|
|Magnetic system|Bistable|Polarized|
|Rated coil voltage|5 to 24VDC|3 to 12VDC|
|Rated coil power|1.5W/3W|140mW - 1 coil version|
|Dielectric Strength|
|Initial dielectric strength|
|between open contacts|1500Vrms|1500Vrms|
|between contact and coil|4000Vrms|3000Vrms|
|between adjacent contacts|1500Vrms|
|Clearance/creepage|
|between contact and coil|≥6/9mm|
|Initial surge withstand voltage|
|between contact and coil|6000Vrms|
|Other Data|
|Ambient temperature (max.)|+70°C|-40 to +85°C|
|Category of environmental protection IEC61810|RTI|RTIII|
|Terminal type|PCB|THT, SMT|
|Mounting|PCB|
|Dimensions (lwh)|36.8×17.2x30.4mm|14.5x7.2x9.9mm, ovrmld|
|Accessories|
|Link to datasheet|EW60|AXICOM P2 LIGHTING|

**----- End of picture text -----**<br>


1)   Recommended minimum load indication for contact material: AU and gold plated: 1mA at 6VDC; AgNi0.15 and AgNi90/10: 2)  Footprint images are representative. For a complete selection, refer to the TE 10mA at 12VDC: AgCdO and AgSnO2: 100mA at 12VDC. Please contact technical support for detailed technical data. data sheet via the link above. 

## **te.com** 

© 2019 TE Connectivity. All Rights Reserved. 

Axicom, Potter & Brumfield, SCHRACK, TE, TE Connectivity, and TE Connectivity (logo) are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. 

While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. 

**1-1773889-9  07/19   ML** 

INDUSTRIAL /// LIGHTING RELAY GUIDE